From: "Iremonger, Bernard" <bernard.iremonger@intel.com>
To: Stephen Hemminger <stephen@networkplumber.org>,
"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v6 1/3] app/testpmd: add ability to set Tx IP and UDP parameters
Date: Thu, 11 Apr 2019 09:02:27 +0000 [thread overview]
Message-ID: <8CEF83825BEC744B83065625E567D7C260D87BC8@IRSMSX108.ger.corp.intel.com> (raw)
Message-ID: <20190411090227._YsATmtaCBiTniLTTT4enKr1y9QZE3C0CBFqW_wBNyo@z> (raw)
In-Reply-To: <20190410174132.8349-2-stephen@networkplumber.org>
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Stephen
> Hemminger
> Sent: Wednesday, April 10, 2019 6:42 PM
> To: dev@dpdk.org
> Cc: Stephen Hemminger <stephen@networkplumber.org>
> Subject: [dpdk-dev] [PATCH v6 1/3] app/testpmd: add ability to set Tx IP and
> UDP parameters
>
> This patch changes what testpmd uses as IP addresses when run in transmit
> only mode. The old code was using
> 192.168.0.1 -> 192.168.0.2
> but these addresses are reserved for private Internet by RFC 1918.
>
> The new code uses 192.18.0.1 and 192.18.0.2 which are on the subnet
> reserved for performance testing by RFC 2544.
>
> New command line option allows the user to pick any other src/dst address
> desired.
>
> Notice: this changes the default IP address for transmit only.
> It may cause some user who has hardcoded network addresses to report a
> regression.
>
> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
next prev parent reply other threads:[~2019-04-11 9:02 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-18 21:35 [dpdk-dev] [PATCH v3 0/3] use RFC addresses for testing Stephen Hemminger
2018-06-18 21:35 ` [dpdk-dev] [PATCH v3 1/3] testpmd: add ability to set tx IP and UDP parameters Stephen Hemminger
2018-06-22 9:12 ` Iremonger, Bernard
2018-10-29 2:25 ` Thomas Monjalon
2018-06-26 11:47 ` Shahaf Shuler
2018-06-26 11:51 ` Shahaf Shuler
2019-04-02 20:39 ` [dpdk-dev] [PATCH v4 0/3] use RFC addresses in test applications Stephen Hemminger
2019-04-02 20:39 ` Stephen Hemminger
2019-04-02 20:39 ` [dpdk-dev] [PATCH v4 1/3] app/testpmd: add ability to set Tx IP and UDP parameters Stephen Hemminger
2019-04-02 20:39 ` Stephen Hemminger
2019-04-08 12:51 ` Iremonger, Bernard
2019-04-08 12:51 ` Iremonger, Bernard
2019-04-02 20:39 ` [dpdk-dev] [PATCH v4 2/3] examples/l3fwd: use reserved IPv4/IPv6 addresses Stephen Hemminger
2019-04-02 20:39 ` Stephen Hemminger
2019-04-08 13:07 ` Iremonger, Bernard
2019-04-08 13:07 ` Iremonger, Bernard
2019-04-09 17:14 ` Stephen Hemminger
2019-04-09 17:14 ` Stephen Hemminger
2019-04-02 20:39 ` [dpdk-dev] [PATCH v4 3/3] examples/l3fwd: format the IP addresses for printing Stephen Hemminger
2019-04-02 20:39 ` Stephen Hemminger
2019-04-08 13:14 ` Iremonger, Bernard
2019-04-08 13:14 ` Iremonger, Bernard
2019-04-09 18:20 ` [dpdk-dev] [PATCH v5 0/3] use RFC addresses in test applications Stephen Hemminger
2019-04-09 18:20 ` Stephen Hemminger
2019-04-09 18:20 ` [dpdk-dev] [PATCH v5 1/3] app/testpmd: add ability to set Tx IP and UDP parameters Stephen Hemminger
2019-04-09 18:20 ` Stephen Hemminger
2019-04-10 10:07 ` Iremonger, Bernard
2019-04-10 10:07 ` Iremonger, Bernard
2019-04-09 18:20 ` [dpdk-dev] [PATCH v5 2/3] examples/l3fwd: use reserved IPv4/IPv6 addresses Stephen Hemminger
2019-04-09 18:20 ` Stephen Hemminger
2019-04-10 8:56 ` Iremonger, Bernard
2019-04-10 8:56 ` Iremonger, Bernard
2019-04-09 18:20 ` [dpdk-dev] [PATCH v5 3/3] examples/l3fwd: format the IP addresses for printing Stephen Hemminger
2019-04-09 18:20 ` Stephen Hemminger
2019-04-10 17:41 ` [dpdk-dev] [PATCH v6 0/3] use IPv4 addresses reserved for testing Stephen Hemminger
2019-04-10 17:41 ` Stephen Hemminger
2019-04-10 17:41 ` [dpdk-dev] [PATCH v6 1/3] app/testpmd: add ability to set Tx IP and UDP parameters Stephen Hemminger
2019-04-10 17:41 ` Stephen Hemminger
2019-04-11 9:02 ` Iremonger, Bernard [this message]
2019-04-11 9:02 ` Iremonger, Bernard
2019-04-10 17:41 ` [dpdk-dev] [PATCH v6 2/3] examples/l3fwd: use reserved IPv4/IPv6 addresses Stephen Hemminger
2019-04-10 17:41 ` Stephen Hemminger
2019-04-11 9:08 ` Iremonger, Bernard
2019-04-11 9:08 ` Iremonger, Bernard
2019-04-10 17:41 ` [dpdk-dev] [PATCH v6 3/3] examples/l3fwd: format the IP addresses for printing Stephen Hemminger
2019-04-10 17:41 ` Stephen Hemminger
2019-04-21 21:55 ` [dpdk-dev] [PATCH v6 0/3] use IPv4 addresses reserved for testing Thomas Monjalon
2019-04-21 21:55 ` Thomas Monjalon
2018-06-18 21:35 ` [dpdk-dev] [PATCH v3 2/3] examples/l3fwd: use reserved IPv4/IPv6 addresses Stephen Hemminger
2018-06-22 9:19 ` Iremonger, Bernard
2018-06-18 21:35 ` [dpdk-dev] [PATCH v3 3/3] examples/l3fwd: format the IP addresses for printing Stephen Hemminger
2018-06-22 10:23 ` Iremonger, Bernard
2018-06-22 13:44 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CEF83825BEC744B83065625E567D7C260D87BC8@IRSMSX108.ger.corp.intel.com \
--to=bernard.iremonger@intel.com \
--cc=dev@dpdk.org \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).