From: Gagandeep Singh <G.Singh@nxp.com>
To: "dev@dpdk.org" <dev@dpdk.org>,
"ferruh.yigit@intel.com" <ferruh.yigit@intel.com>
Cc: Gagandeep Singh <G.Singh@nxp.com>
Subject: [dpdk-dev] [PATCH v4 10/13] net/enetc: enable Rx-Tx queue start/stop feature
Date: Fri, 12 Apr 2019 12:29:06 +0000 [thread overview]
Message-ID: <20190412122840.1908-11-g.singh@nxp.com> (raw)
In-Reply-To: <20190412122840.1908-1-g.singh@nxp.com>
Rx and Tx queue start-stop and deferred queue start
features enabled.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
---
doc/guides/nics/enetc.rst | 2 +
doc/guides/nics/features/enetc.ini | 1 +
drivers/net/enetc/enetc_ethdev.c | 185 ++++++++++++++++++++---------
3 files changed, 134 insertions(+), 54 deletions(-)
diff --git a/doc/guides/nics/enetc.rst b/doc/guides/nics/enetc.rst
index eeb07523d..26d61f67d 100644
--- a/doc/guides/nics/enetc.rst
+++ b/doc/guides/nics/enetc.rst
@@ -50,6 +50,8 @@ ENETC Features
- Promiscuous
- Multicast
- Jumbo packets
+- Queue Start/Stop
+- Deferred Queue Start
NIC Driver (PMD)
~~~~~~~~~~~~~~~~
diff --git a/doc/guides/nics/features/enetc.ini b/doc/guides/nics/features/enetc.ini
index 0eed2cb9b..bd901faf4 100644
--- a/doc/guides/nics/features/enetc.ini
+++ b/doc/guides/nics/features/enetc.ini
@@ -11,6 +11,7 @@ Promiscuous mode = Y
Allmulticast mode = Y
MTU update = Y
Jumbo frame = Y
+Queue start/stop = Y
Linux VFIO = Y
ARMv8 = Y
Usage doc = Y
diff --git a/drivers/net/enetc/enetc_ethdev.c b/drivers/net/enetc/enetc_ethdev.c
index 66cbf74d0..ff9301e01 100644
--- a/drivers/net/enetc/enetc_ethdev.c
+++ b/drivers/net/enetc/enetc_ethdev.c
@@ -203,7 +203,6 @@ static void
enetc_setup_txbdr(struct enetc_hw *hw, struct enetc_bdr *tx_ring)
{
int idx = tx_ring->index;
- uint32_t tbmr;
phys_addr_t bd_address;
bd_address = (phys_addr_t)
@@ -215,9 +214,6 @@ enetc_setup_txbdr(struct enetc_hw *hw, struct enetc_bdr *tx_ring)
enetc_txbdr_wr(hw, idx, ENETC_TBLENR,
ENETC_RTBLENR_LEN(tx_ring->bd_count));
- tbmr = ENETC_TBMR_EN;
- /* enable ring */
- enetc_txbdr_wr(hw, idx, ENETC_TBMR, tbmr);
enetc_txbdr_wr(hw, idx, ENETC_TBCIR, 0);
enetc_txbdr_wr(hw, idx, ENETC_TBCISR, 0);
tx_ring->tcir = (void *)((size_t)hw->reg +
@@ -227,16 +223,22 @@ enetc_setup_txbdr(struct enetc_hw *hw, struct enetc_bdr *tx_ring)
}
static int
-enetc_alloc_tx_resources(struct rte_eth_dev *dev,
- uint16_t queue_idx,
- uint16_t nb_desc)
+enetc_tx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t queue_idx,
+ uint16_t nb_desc,
+ unsigned int socket_id __rte_unused,
+ const struct rte_eth_txconf *tx_conf)
{
- int err;
+ int err = 0;
struct enetc_bdr *tx_ring;
struct rte_eth_dev_data *data = dev->data;
struct enetc_eth_adapter *priv =
ENETC_DEV_PRIVATE(data->dev_private);
+ PMD_INIT_FUNC_TRACE();
+ if (nb_desc > MAX_BD_COUNT)
+ return -1;
+
tx_ring = rte_zmalloc(NULL, sizeof(struct enetc_bdr), 0);
if (tx_ring == NULL) {
ENETC_PMD_ERR("Failed to allocate TX ring memory");
@@ -253,6 +255,17 @@ enetc_alloc_tx_resources(struct rte_eth_dev *dev,
enetc_setup_txbdr(&priv->hw.hw, tx_ring);
data->tx_queues[queue_idx] = tx_ring;
+ if (!tx_conf->tx_deferred_start) {
+ /* enable ring */
+ enetc_txbdr_wr(&priv->hw.hw, tx_ring->index,
+ ENETC_TBMR, ENETC_TBMR_EN);
+ dev->data->tx_queue_state[tx_ring->index] =
+ RTE_ETH_QUEUE_STATE_STARTED;
+ } else {
+ dev->data->tx_queue_state[tx_ring->index] =
+ RTE_ETH_QUEUE_STATE_STOPPED;
+ }
+
return 0;
fail:
rte_free(tx_ring);
@@ -260,24 +273,6 @@ enetc_alloc_tx_resources(struct rte_eth_dev *dev,
return err;
}
-static int
-enetc_tx_queue_setup(struct rte_eth_dev *dev,
- uint16_t queue_idx,
- uint16_t nb_desc,
- unsigned int socket_id __rte_unused,
- const struct rte_eth_txconf *tx_conf __rte_unused)
-{
- int err = 0;
-
- PMD_INIT_FUNC_TRACE();
- if (nb_desc > MAX_BD_COUNT)
- return -1;
-
- err = enetc_alloc_tx_resources(dev, queue_idx, nb_desc);
-
- return err;
-}
-
static void
enetc_tx_queue_release(void *txq)
{
@@ -367,23 +362,27 @@ enetc_setup_rxbdr(struct enetc_hw *hw, struct enetc_bdr *rx_ring,
buf_size = (uint16_t)(rte_pktmbuf_data_room_size(rx_ring->mb_pool) -
RTE_PKTMBUF_HEADROOM);
enetc_rxbdr_wr(hw, idx, ENETC_RBBSR, buf_size);
- /* enable ring */
- enetc_rxbdr_wr(hw, idx, ENETC_RBMR, ENETC_RBMR_EN);
enetc_rxbdr_wr(hw, idx, ENETC_RBPIR, 0);
}
static int
-enetc_alloc_rx_resources(struct rte_eth_dev *dev,
- uint16_t rx_queue_id,
- uint16_t nb_rx_desc,
- struct rte_mempool *mb_pool)
+enetc_rx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id,
+ uint16_t nb_rx_desc,
+ unsigned int socket_id __rte_unused,
+ const struct rte_eth_rxconf *rx_conf,
+ struct rte_mempool *mb_pool)
{
- int err;
+ int err = 0;
struct enetc_bdr *rx_ring;
struct rte_eth_dev_data *data = dev->data;
struct enetc_eth_adapter *adapter =
ENETC_DEV_PRIVATE(data->dev_private);
+ PMD_INIT_FUNC_TRACE();
+ if (nb_rx_desc > MAX_BD_COUNT)
+ return -1;
+
rx_ring = rte_zmalloc(NULL, sizeof(struct enetc_bdr), 0);
if (rx_ring == NULL) {
ENETC_PMD_ERR("Failed to allocate RX ring memory");
@@ -400,6 +399,17 @@ enetc_alloc_rx_resources(struct rte_eth_dev *dev,
enetc_setup_rxbdr(&adapter->hw.hw, rx_ring, mb_pool);
data->rx_queues[rx_queue_id] = rx_ring;
+ if (!rx_conf->rx_deferred_start) {
+ /* enable ring */
+ enetc_rxbdr_wr(&adapter->hw.hw, rx_ring->index, ENETC_RBMR,
+ ENETC_RBMR_EN);
+ dev->data->rx_queue_state[rx_ring->index] =
+ RTE_ETH_QUEUE_STATE_STARTED;
+ } else {
+ dev->data->rx_queue_state[rx_ring->index] =
+ RTE_ETH_QUEUE_STATE_STOPPED;
+ }
+
return 0;
fail:
rte_free(rx_ring);
@@ -407,27 +417,6 @@ enetc_alloc_rx_resources(struct rte_eth_dev *dev,
return err;
}
-static int
-enetc_rx_queue_setup(struct rte_eth_dev *dev,
- uint16_t rx_queue_id,
- uint16_t nb_rx_desc,
- unsigned int socket_id __rte_unused,
- const struct rte_eth_rxconf *rx_conf __rte_unused,
- struct rte_mempool *mb_pool)
-{
- int err = 0;
-
- PMD_INIT_FUNC_TRACE();
- if (nb_rx_desc > MAX_BD_COUNT)
- return -1;
-
- err = enetc_alloc_rx_resources(dev, rx_queue_id,
- nb_rx_desc,
- mb_pool);
-
- return err;
-}
-
static void
enetc_rx_queue_release(void *rxq)
{
@@ -661,6 +650,90 @@ enetc_dev_configure(struct rte_eth_dev *dev)
return 0;
}
+static int
+enetc_rx_queue_start(struct rte_eth_dev *dev, uint16_t qidx)
+{
+ struct enetc_eth_adapter *priv =
+ ENETC_DEV_PRIVATE(dev->data->dev_private);
+ struct enetc_bdr *rx_ring;
+ uint32_t rx_data;
+
+ rx_ring = dev->data->rx_queues[qidx];
+ if (dev->data->rx_queue_state[qidx] == RTE_ETH_QUEUE_STATE_STOPPED) {
+ rx_data = enetc_rxbdr_rd(&priv->hw.hw, rx_ring->index,
+ ENETC_RBMR);
+ rx_data = rx_data | ENETC_RBMR_EN;
+ enetc_rxbdr_wr(&priv->hw.hw, rx_ring->index, ENETC_RBMR,
+ rx_data);
+ dev->data->rx_queue_state[qidx] = RTE_ETH_QUEUE_STATE_STARTED;
+ }
+
+ return 0;
+}
+
+static int
+enetc_rx_queue_stop(struct rte_eth_dev *dev, uint16_t qidx)
+{
+ struct enetc_eth_adapter *priv =
+ ENETC_DEV_PRIVATE(dev->data->dev_private);
+ struct enetc_bdr *rx_ring;
+ uint32_t rx_data;
+
+ rx_ring = dev->data->rx_queues[qidx];
+ if (dev->data->rx_queue_state[qidx] == RTE_ETH_QUEUE_STATE_STARTED) {
+ rx_data = enetc_rxbdr_rd(&priv->hw.hw, rx_ring->index,
+ ENETC_RBMR);
+ rx_data = rx_data & (~ENETC_RBMR_EN);
+ enetc_rxbdr_wr(&priv->hw.hw, rx_ring->index, ENETC_RBMR,
+ rx_data);
+ dev->data->rx_queue_state[qidx] = RTE_ETH_QUEUE_STATE_STOPPED;
+ }
+
+ return 0;
+}
+
+static int
+enetc_tx_queue_start(struct rte_eth_dev *dev, uint16_t qidx)
+{
+ struct enetc_eth_adapter *priv =
+ ENETC_DEV_PRIVATE(dev->data->dev_private);
+ struct enetc_bdr *tx_ring;
+ uint32_t tx_data;
+
+ tx_ring = dev->data->tx_queues[qidx];
+ if (dev->data->tx_queue_state[qidx] == RTE_ETH_QUEUE_STATE_STOPPED) {
+ tx_data = enetc_txbdr_rd(&priv->hw.hw, tx_ring->index,
+ ENETC_TBMR);
+ tx_data = tx_data | ENETC_TBMR_EN;
+ enetc_txbdr_wr(&priv->hw.hw, tx_ring->index, ENETC_TBMR,
+ tx_data);
+ dev->data->tx_queue_state[qidx] = RTE_ETH_QUEUE_STATE_STARTED;
+ }
+
+ return 0;
+}
+
+static int
+enetc_tx_queue_stop(struct rte_eth_dev *dev, uint16_t qidx)
+{
+ struct enetc_eth_adapter *priv =
+ ENETC_DEV_PRIVATE(dev->data->dev_private);
+ struct enetc_bdr *tx_ring;
+ uint32_t tx_data;
+
+ tx_ring = dev->data->tx_queues[qidx];
+ if (dev->data->tx_queue_state[qidx] == RTE_ETH_QUEUE_STATE_STARTED) {
+ tx_data = enetc_txbdr_rd(&priv->hw.hw, tx_ring->index,
+ ENETC_TBMR);
+ tx_data = tx_data & (~ENETC_TBMR_EN);
+ enetc_txbdr_wr(&priv->hw.hw, tx_ring->index, ENETC_TBMR,
+ tx_data);
+ dev->data->tx_queue_state[qidx] = RTE_ETH_QUEUE_STATE_STOPPED;
+ }
+
+ return 0;
+}
+
/*
* The set of PCI devices this driver supports
*/
@@ -686,8 +759,12 @@ static const struct eth_dev_ops enetc_ops = {
.dev_infos_get = enetc_dev_infos_get,
.mtu_set = enetc_mtu_set,
.rx_queue_setup = enetc_rx_queue_setup,
+ .rx_queue_start = enetc_rx_queue_start,
+ .rx_queue_stop = enetc_rx_queue_stop,
.rx_queue_release = enetc_rx_queue_release,
.tx_queue_setup = enetc_tx_queue_setup,
+ .tx_queue_start = enetc_tx_queue_start,
+ .tx_queue_stop = enetc_tx_queue_stop,
.tx_queue_release = enetc_tx_queue_release,
.dev_supported_ptypes_get = enetc_supported_ptypes_get,
};
--
2.19.1
next prev parent reply other threads:[~2019-04-12 12:29 UTC|newest]
Thread overview: 126+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-08 11:22 [dpdk-dev] [PATCH 00/13] ENETC PMD basic features and bug fixes Gagandeep Singh
2019-04-08 11:22 ` Gagandeep Singh
2019-04-08 11:22 ` [dpdk-dev] [PATCH 01/13] net/enetc: support physical addressing mode Gagandeep Singh
2019-04-08 11:22 ` Gagandeep Singh
2019-04-08 13:16 ` Ferruh Yigit
2019-04-08 13:16 ` Ferruh Yigit
2019-04-08 11:22 ` [dpdk-dev] [PATCH 02/13] net/enetc: fix SMMU unhandled context fault Gagandeep Singh
2019-04-08 11:22 ` Gagandeep Singh
2019-04-08 11:22 ` [dpdk-dev] [PATCH 03/13] net/enetc: use correct buffer allocation API Gagandeep Singh
2019-04-08 11:22 ` Gagandeep Singh
2019-04-08 11:22 ` [dpdk-dev] [PATCH 04/13] net/enetc: set interface mode for SXGMII Gagandeep Singh
2019-04-08 11:22 ` Gagandeep Singh
2019-04-08 11:22 ` [dpdk-dev] [PATCH 05/13] net/enetc: add statistics APIs Gagandeep Singh
2019-04-08 11:22 ` Gagandeep Singh
2019-04-08 11:35 ` David Marchand
2019-04-08 11:35 ` David Marchand
2019-04-10 11:18 ` [dpdk-dev] [EXT] " Gagandeep Singh
2019-04-10 11:18 ` Gagandeep Singh
2019-04-08 11:22 ` [dpdk-dev] [PATCH 06/13] net/enetc: replace register read/write macros with functions Gagandeep Singh
2019-04-08 11:22 ` Gagandeep Singh
2019-04-08 11:22 ` [dpdk-dev] [PATCH 07/13] net/enetc: remove forward declarations Gagandeep Singh
2019-04-08 11:22 ` Gagandeep Singh
2019-04-08 11:22 ` [dpdk-dev] [PATCH 08/13] net/enetc: enable promiscuous and allmulticast feature Gagandeep Singh
2019-04-08 11:22 ` Gagandeep Singh
2019-04-08 11:22 ` [dpdk-dev] [PATCH 09/13] net/enetc: add MTU update and jumbo frames support Gagandeep Singh
2019-04-08 11:22 ` Gagandeep Singh
2019-04-08 11:22 ` [dpdk-dev] [PATCH 10/13] net/enetc: enable Rx-Tx queue start/stop feature Gagandeep Singh
2019-04-08 11:22 ` Gagandeep Singh
2019-04-08 11:22 ` [dpdk-dev] [PATCH 11/13] net/enetc: enable CRC offload feature Gagandeep Singh
2019-04-08 11:22 ` Gagandeep Singh
2019-04-08 11:22 ` [dpdk-dev] [PATCH 12/13] net/enetc: enable Rx checksum offload validation Gagandeep Singh
2019-04-08 11:22 ` Gagandeep Singh
2019-04-08 11:22 ` [dpdk-dev] [PATCH 13/13] net/enetc: fix crash at high speed traffic Gagandeep Singh
2019-04-08 11:22 ` Gagandeep Singh
2019-04-12 7:04 ` [dpdk-dev] [PATCH v2 00/13] ENETC PMD basic features and bug fixes Gagandeep Singh
2019-04-12 7:04 ` Gagandeep Singh
2019-04-12 7:04 ` [dpdk-dev] [PATCH v2 01/13] net/enetc: support physical addressing mode Gagandeep Singh
2019-04-12 7:04 ` Gagandeep Singh
2019-04-12 7:04 ` [dpdk-dev] [PATCH v2 02/13] net/enetc: fix SMMU unhandled context fault Gagandeep Singh
2019-04-12 7:04 ` Gagandeep Singh
2019-04-12 7:04 ` [dpdk-dev] [PATCH v2 03/13] net/enetc: use correct buffer allocation API Gagandeep Singh
2019-04-12 7:04 ` Gagandeep Singh
2019-04-12 8:37 ` Thomas Monjalon
2019-04-12 8:37 ` Thomas Monjalon
2019-04-12 8:50 ` [dpdk-dev] [EXT] " Gagandeep Singh
2019-04-12 8:50 ` Gagandeep Singh
2019-04-12 7:04 ` [dpdk-dev] [PATCH v2 04/13] net/enetc: set interface mode for SXGMII Gagandeep Singh
2019-04-12 7:04 ` Gagandeep Singh
2019-04-12 7:04 ` [dpdk-dev] [PATCH v2 05/13] net/enetc: add basic statistics Gagandeep Singh
2019-04-12 7:04 ` Gagandeep Singh
2019-04-12 7:04 ` [dpdk-dev] [PATCH v2 06/13] net/enetc: replace register read/write macros with functions Gagandeep Singh
2019-04-12 7:04 ` Gagandeep Singh
2019-04-12 7:04 ` [dpdk-dev] [PATCH v2 07/13] net/enetc: remove forward declarations Gagandeep Singh
2019-04-12 7:04 ` Gagandeep Singh
2019-04-12 7:04 ` [dpdk-dev] [PATCH v2 08/13] net/enetc: enable promiscuous and allmulticast feature Gagandeep Singh
2019-04-12 7:04 ` Gagandeep Singh
2019-04-12 7:04 ` [dpdk-dev] [PATCH v2 09/13] net/enetc: add MTU update and jumbo frames support Gagandeep Singh
2019-04-12 7:04 ` Gagandeep Singh
2019-04-12 7:04 ` [dpdk-dev] [PATCH v2 10/13] net/enetc: enable Rx-Tx queue start/stop feature Gagandeep Singh
2019-04-12 7:04 ` Gagandeep Singh
2019-04-12 7:04 ` [dpdk-dev] [PATCH v2 11/13] net/enetc: enable CRC offload feature Gagandeep Singh
2019-04-12 7:04 ` Gagandeep Singh
2019-04-12 7:04 ` [dpdk-dev] [PATCH v2 12/13] net/enetc: enable Rx checksum offload validation Gagandeep Singh
2019-04-12 7:04 ` Gagandeep Singh
2019-04-12 7:04 ` [dpdk-dev] [PATCH v2 13/13] net/enetc: fix crash at high speed traffic Gagandeep Singh
2019-04-12 7:04 ` Gagandeep Singh
2019-04-12 11:01 ` [dpdk-dev] [PATCH v3 00/13] ENETC PMD basic features and bug fixes Gagandeep Singh
2019-04-12 11:01 ` Gagandeep Singh
2019-04-12 11:01 ` [dpdk-dev] [PATCH v3 01/13] net/enetc: support physical addressing mode Gagandeep Singh
2019-04-12 11:01 ` Gagandeep Singh
2019-04-12 11:01 ` [dpdk-dev] [PATCH v3 02/13] net/enetc: fix SMMU unhandled context fault Gagandeep Singh
2019-04-12 11:01 ` Gagandeep Singh
2019-04-12 11:01 ` [dpdk-dev] [PATCH v3 03/13] net/enetc: fix big endian build and correct buffer allocation Gagandeep Singh
2019-04-12 11:01 ` Gagandeep Singh
2019-04-12 11:01 ` [dpdk-dev] [PATCH v3 04/13] net/enetc: set interface mode for SXGMII Gagandeep Singh
2019-04-12 11:01 ` Gagandeep Singh
2019-04-12 11:01 ` [dpdk-dev] [PATCH v3 05/13] net/enetc: add basic statistics Gagandeep Singh
2019-04-12 11:01 ` Gagandeep Singh
2019-04-12 11:01 ` [dpdk-dev] [PATCH v3 06/13] net/enetc: replace register read/write macros with functions Gagandeep Singh
2019-04-12 11:01 ` Gagandeep Singh
2019-04-12 11:01 ` [dpdk-dev] [PATCH v3 07/13] net/enetc: remove forward declarations Gagandeep Singh
2019-04-12 11:01 ` Gagandeep Singh
2019-04-12 11:01 ` [dpdk-dev] [PATCH v3 08/13] net/enetc: enable promiscuous and allmulticast feature Gagandeep Singh
2019-04-12 11:01 ` Gagandeep Singh
2019-04-12 11:01 ` [dpdk-dev] [PATCH v3 09/13] net/enetc: add MTU update and jumbo frames support Gagandeep Singh
2019-04-12 11:01 ` Gagandeep Singh
2019-04-12 11:01 ` [dpdk-dev] [PATCH v3 10/13] net/enetc: enable Rx-Tx queue start/stop feature Gagandeep Singh
2019-04-12 11:01 ` Gagandeep Singh
2019-04-12 11:01 ` [dpdk-dev] [PATCH v3 11/13] net/enetc: enable CRC offload feature Gagandeep Singh
2019-04-12 11:01 ` Gagandeep Singh
2019-04-12 11:01 ` [dpdk-dev] [PATCH v3 12/13] net/enetc: enable Rx checksum offload validation Gagandeep Singh
2019-04-12 11:01 ` Gagandeep Singh
2019-04-12 11:01 ` [dpdk-dev] [PATCH v3 13/13] net/enetc: fix crash at high speed traffic Gagandeep Singh
2019-04-12 11:01 ` Gagandeep Singh
2019-04-12 12:28 ` [dpdk-dev] [PATCH v4 00/13] ENETC PMD basic features and bug fixes Gagandeep Singh
2019-04-12 12:28 ` Gagandeep Singh
2019-04-12 12:28 ` [dpdk-dev] [PATCH v4 01/13] net/enetc: support physical addressing mode Gagandeep Singh
2019-04-12 12:28 ` Gagandeep Singh
2019-04-12 12:28 ` [dpdk-dev] [PATCH v4 02/13] net/enetc: fix SMMU unhandled context fault Gagandeep Singh
2019-04-12 12:28 ` Gagandeep Singh
2019-04-12 12:28 ` [dpdk-dev] [PATCH v4 03/13] net/enetc: fix big endian build and correct buffer allocation Gagandeep Singh
2019-04-12 12:28 ` Gagandeep Singh
2019-04-12 12:28 ` [dpdk-dev] [PATCH v4 04/13] net/enetc: set interface mode for SXGMII Gagandeep Singh
2019-04-12 12:28 ` Gagandeep Singh
2019-04-12 12:28 ` [dpdk-dev] [PATCH v4 05/13] net/enetc: add basic statistics Gagandeep Singh
2019-04-12 12:28 ` Gagandeep Singh
2019-04-12 12:29 ` [dpdk-dev] [PATCH v4 06/13] net/enetc: replace register read/write macros with functions Gagandeep Singh
2019-04-12 12:29 ` Gagandeep Singh
2019-04-12 12:29 ` [dpdk-dev] [PATCH v4 07/13] net/enetc: remove forward declarations Gagandeep Singh
2019-04-12 12:29 ` Gagandeep Singh
2019-04-12 12:29 ` [dpdk-dev] [PATCH v4 08/13] net/enetc: enable promiscuous and allmulticast feature Gagandeep Singh
2019-04-12 12:29 ` Gagandeep Singh
2019-04-12 12:29 ` [dpdk-dev] [PATCH v4 09/13] net/enetc: add MTU update and jumbo frames support Gagandeep Singh
2019-04-12 12:29 ` Gagandeep Singh
2019-04-12 12:29 ` Gagandeep Singh [this message]
2019-04-12 12:29 ` [dpdk-dev] [PATCH v4 10/13] net/enetc: enable Rx-Tx queue start/stop feature Gagandeep Singh
2019-04-12 12:29 ` [dpdk-dev] [PATCH v4 11/13] net/enetc: enable CRC offload feature Gagandeep Singh
2019-04-12 12:29 ` Gagandeep Singh
2019-04-12 12:29 ` [dpdk-dev] [PATCH v4 12/13] net/enetc: enable Rx checksum offload validation Gagandeep Singh
2019-04-12 12:29 ` Gagandeep Singh
2019-04-12 12:29 ` [dpdk-dev] [PATCH v4 13/13] net/enetc: fix crash at high speed traffic Gagandeep Singh
2019-04-12 12:29 ` Gagandeep Singh
2019-04-16 7:41 ` [dpdk-dev] [PATCH v4 00/13] ENETC PMD basic features and bug fixes Ferruh Yigit
2019-04-16 7:41 ` Ferruh Yigit
2019-04-16 8:28 ` Ferruh Yigit
2019-04-16 8:28 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190412122840.1908-11-g.singh@nxp.com \
--to=g.singh@nxp.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).