From: Yongseok Koh <yskoh@mellanox.com>
To: Ori Kam <orika@mellanox.com>
Cc: Shahaf Shuler <shahafs@mellanox.com>,
Matan Azrad <matan@mellanox.com>,
Slava Ovsiienko <viacheslavo@mellanox.com>,
Moti Haimovsky <motih@mellanox.com>,
"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH 5/9] net/mlx5: add port ID item to Direct Verbs
Date: Thu, 18 Apr 2019 00:19:54 +0000 [thread overview]
Message-ID: <20190418001944.GB31179@mtidpdk.mti.labs.mlnx> (raw)
Message-ID: <20190418001954.4Ywp-5RP9U7zprJXGclYm2_GnvNADJIHvWFmyoKfr0Q@z> (raw)
In-Reply-To: <1555276357-4892-6-git-send-email-orika@mellanox.com>
On Sun, Apr 14, 2019 at 09:12:33PM +0000, Ori Kam wrote:
> Adds the port ID item to the DV steering code.
>
> Signed-off-by: Ori Kam <orika@mellanox.com>
> ---
> drivers/net/mlx5/mlx5_flow_dv.c | 86 ++++++++++++++++++++++++++++++-----------
> 1 file changed, 63 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
> index fedc6cb..e66ee34 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -3095,6 +3095,64 @@ struct field_modify_info modify_tcp[] = {
> }
> }
>
> +/**
> + * Add source vport match to the specified matcher.
> + *
> + * @param[in, out] matcher
> + * Flow matcher.
> + * @param[in, out] key
> + * Flow matcher value.
> + * @param[in] port
> + * Source vport value to match
> + * @param[in] mask
> + * Mask
> + */
> +static void
> +flow_dv_translate_item_source_vport(void *matcher, void *key,
> + int16_t port, uint16_t mask)
> +{
> + void *misc_m = MLX5_ADDR_OF(fte_match_param, matcher, misc_parameters);
> + void *misc_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
> +
> + MLX5_SET(fte_match_set_misc, misc_m, source_port, mask);
> + MLX5_SET(fte_match_set_misc, misc_v, source_port, port);
> +}
> +
> +/**
> + * Translate port-id item to eswitch match on port-id.
> + *
> + * @param[in] dev
> + * The devich to configure through.
> + * @param[in, out] matcher
> + * Flow matcher.
> + * @param[in, out] key
> + * Flow matcher value.
> + * @param[in] item
> + * Flow pattern to translate.
> + *
> + * @return
> + * 0 on success, a negative errno value otherwise.
> + */
> +static int
> +flow_dv_eswitch_translate_item_port_id(struct rte_eth_dev *dev,
Why did you put _eswitch in the function name unlike
flow_dv_validate_item_port_id()? It sounds awkward.
> + void *matcher, void *key,
> + const struct rte_flow_item *item)
> +{
> + const struct rte_flow_item_port_id *pid_m = item ? item->mask : NULL;
> + const struct rte_flow_item_port_id *pid_v = item ? item->spec : NULL;
> + uint16_t mask, val, id;
> + int ret;
> +
> + mask = pid_m ? pid_m->id : 0xffff;
> + id = pid_v ? pid_v->id : dev->data->port_id;
> + id = mask ? id : dev->data->port_id;
Again, doesn't zero mask mean 'any' value?
Thanks,
Yongseok
> + ret = mlx5_port_to_eswitch_info(id, NULL, &val);
> + if (ret)
> + return ret;
> + flow_dv_translate_item_source_vport(matcher, key, val, mask);
> + return 0;
> +}
> +
> static uint32_t matcher_zero[MLX5_ST_SZ_DW(fte_match_param)] = { 0 };
>
> #define HEADER_IS_ZERO(match_criteria, headers) \
> @@ -3305,29 +3363,6 @@ struct field_modify_info modify_tcp[] = {
> }
>
> /**
> - * Add source vport match to the specified matcher.
> - *
> - * @param[in, out] matcher
> - * Flow matcher.
> - * @param[in, out] key
> - * Flow matcher value.
> - * @param[in] port
> - * Source vport value to match
> - * @param[in] mask
> - * Mask
> - */
> -static void
> -flow_dv_translate_item_source_vport(void *matcher, void *key,
> - int16_t port, uint16_t mask)
> -{
> - void *misc_m = MLX5_ADDR_OF(fte_match_param, matcher, misc_parameters);
> - void *misc_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters);
> -
> - MLX5_SET(fte_match_set_misc, misc_m, source_port, mask);
> - MLX5_SET(fte_match_set_misc, misc_v, source_port, port);
> -}
> -
> -/**
> * Find existing tag resource or create and register a new one.
> *
> * @param dev[in, out]
> @@ -3733,6 +3768,11 @@ struct field_modify_info modify_tcp[] = {
> void *match_value = dev_flow->dv.value.buf;
>
> switch (items->type) {
> + case RTE_FLOW_ITEM_TYPE_PORT_ID:
> + flow_dv_eswitch_translate_item_port_id
> + (dev, match_mask, match_value, items);
> + last_item = MLX5_FLOW_ITEM_PORT_ID;
> + break;
> case RTE_FLOW_ITEM_TYPE_ETH:
> flow_dv_translate_item_eth(match_mask, match_value,
> items, tunnel);
> --
> 1.8.3.1
>
next prev parent reply other threads:[~2019-04-18 0:20 UTC|newest]
Thread overview: 124+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-14 21:12 [dpdk-dev] [PATCH 0/9] net/mlx5: add Direct Verbs E-Switch support Ori Kam
2019-04-14 21:12 ` Ori Kam
2019-04-14 21:12 ` [dpdk-dev] [PATCH 1/9] net/mlx5: fix translate vport function name Ori Kam
2019-04-14 21:12 ` Ori Kam
2019-04-16 23:47 ` Yongseok Koh
2019-04-16 23:47 ` Yongseok Koh
2019-04-14 21:12 ` [dpdk-dev] [PATCH 2/9] net/mlx5: fix menson compilation with Direct Rules Ori Kam
2019-04-14 21:12 ` Ori Kam
2019-04-17 0:01 ` Yongseok Koh
2019-04-17 0:01 ` Yongseok Koh
2019-04-17 0:34 ` Yongseok Koh
2019-04-17 0:34 ` Yongseok Koh
2019-04-17 5:18 ` Ori Kam
2019-04-17 5:18 ` Ori Kam
2019-04-17 5:18 ` Ori Kam
2019-04-17 5:18 ` Ori Kam
2019-04-14 21:12 ` [dpdk-dev] [PATCH 3/9] net/mlx5: add Direct Rules configuration support Ori Kam
2019-04-14 21:12 ` Ori Kam
2019-04-17 1:42 ` Yongseok Koh
2019-04-17 1:42 ` Yongseok Koh
2019-04-17 6:19 ` Ori Kam
2019-04-17 6:19 ` Ori Kam
2019-04-14 21:12 ` [dpdk-dev] [PATCH 4/9] net/mlx5: add validation for Direct Rule E-Switch Ori Kam
2019-04-14 21:12 ` Ori Kam
2019-04-17 23:59 ` Yongseok Koh
2019-04-17 23:59 ` Yongseok Koh
2019-04-18 4:40 ` Ori Kam
2019-04-18 4:40 ` Ori Kam
2019-04-14 21:12 ` [dpdk-dev] [PATCH 5/9] net/mlx5: add port ID item to Direct Verbs Ori Kam
2019-04-14 21:12 ` Ori Kam
2019-04-18 0:19 ` Yongseok Koh [this message]
2019-04-18 0:19 ` Yongseok Koh
2019-04-18 4:43 ` Ori Kam
2019-04-18 4:43 ` Ori Kam
2019-04-14 21:12 ` [dpdk-dev] [PATCH 6/9] net/mlx5: add transfer attribute to matcher Ori Kam
2019-04-14 21:12 ` Ori Kam
2019-04-18 0:38 ` Yongseok Koh
2019-04-18 0:38 ` Yongseok Koh
2019-04-18 4:57 ` Ori Kam
2019-04-18 4:57 ` Ori Kam
2019-04-14 21:12 ` [dpdk-dev] [PATCH 7/9] net/mlx5: add port ID action to Direct Verbs Ori Kam
2019-04-14 21:12 ` Ori Kam
2019-04-18 0:59 ` Yongseok Koh
2019-04-18 0:59 ` Yongseok Koh
2019-04-18 5:06 ` Ori Kam
2019-04-18 5:06 ` Ori Kam
2019-04-14 21:12 ` [dpdk-dev] [PATCH 8/9] net/mlx5: add Forward Database table type Ori Kam
2019-04-14 21:12 ` Ori Kam
2019-04-18 1:16 ` Yongseok Koh
2019-04-18 1:16 ` Yongseok Koh
2019-04-18 5:13 ` Ori Kam
2019-04-18 5:13 ` Ori Kam
2019-04-14 21:12 ` [dpdk-dev] [PATCH 9/9] net/mlx5: add drop action to Direct Verbs E-Switch Ori Kam
2019-04-14 21:12 ` Ori Kam
2019-04-18 1:28 ` Yongseok Koh
2019-04-18 1:28 ` Yongseok Koh
2019-04-18 5:15 ` Ori Kam
2019-04-18 5:15 ` Ori Kam
2019-04-18 11:28 ` [dpdk-dev] [PATCH v2 0/9] net/mlx5: add Direct Verbs E-Switch support Ori Kam
2019-04-18 11:28 ` Ori Kam
2019-04-18 11:28 ` [dpdk-dev] [PATCH v2 1/9] net/mlx5: fix translate vport function name Ori Kam
2019-04-18 11:28 ` Ori Kam
2019-04-18 12:06 ` Yongseok Koh
2019-04-18 12:06 ` Yongseok Koh
2019-04-18 11:28 ` [dpdk-dev] [PATCH v2 2/9] net/mlx5: fix meson build for Direct Rules Ori Kam
2019-04-18 11:28 ` Ori Kam
2019-04-18 12:09 ` Yongseok Koh
2019-04-18 12:09 ` Yongseok Koh
2019-04-18 11:28 ` [dpdk-dev] [PATCH v2 3/9] net/mlx5: add Direct Rules E-Switch support Ori Kam
2019-04-18 11:28 ` Ori Kam
2019-04-18 12:11 ` Yongseok Koh
2019-04-18 12:11 ` Yongseok Koh
2019-04-18 11:28 ` [dpdk-dev] [PATCH v2 4/9] net/mlx5: add validation for Direct Rule E-Switch Ori Kam
2019-04-18 11:28 ` Ori Kam
2019-04-18 12:16 ` Yongseok Koh
2019-04-18 12:16 ` Yongseok Koh
2019-04-18 11:28 ` [dpdk-dev] [PATCH v2 5/9] net/mlx5: add port ID item to Direct Verbs Ori Kam
2019-04-18 11:28 ` Ori Kam
2019-04-18 12:17 ` Yongseok Koh
2019-04-18 12:17 ` Yongseok Koh
2019-04-18 11:28 ` [dpdk-dev] [PATCH v2 6/9] net/mlx5: add transfer attribute to matcher Ori Kam
2019-04-18 11:28 ` Ori Kam
2019-04-18 12:19 ` Yongseok Koh
2019-04-18 12:19 ` Yongseok Koh
2019-04-18 11:28 ` [dpdk-dev] [PATCH v2 7/9] net/mlx5: add E-Switch port ID action to Direct Verbs Ori Kam
2019-04-18 11:28 ` Ori Kam
2019-04-18 12:19 ` Yongseok Koh
2019-04-18 12:19 ` Yongseok Koh
2019-04-18 11:28 ` [dpdk-dev] [PATCH v2 8/9] net/mlx5: add Forward Database table type Ori Kam
2019-04-18 11:28 ` Ori Kam
2019-04-18 12:21 ` Yongseok Koh
2019-04-18 12:21 ` Yongseok Koh
2019-04-18 11:28 ` [dpdk-dev] [PATCH v2 9/9] net/mlx5: add drop action to Direct Verbs E-Switch Ori Kam
2019-04-18 11:28 ` Ori Kam
2019-04-18 12:28 ` Yongseok Koh
2019-04-18 12:28 ` Yongseok Koh
2019-04-18 13:15 ` [dpdk-dev] [PATCH v3 0/9] net/mlx5: add Direct Verbs E-Switch support Ori Kam
2019-04-18 13:15 ` Ori Kam
2019-04-18 13:15 ` [dpdk-dev] [PATCH v3 1/9] net/mlx5: fix translate vport function name Ori Kam
2019-04-18 13:15 ` Ori Kam
2019-04-18 13:16 ` [dpdk-dev] [PATCH v3 2/9] net/mlx5: fix meson build for Direct Rules Ori Kam
2019-04-18 13:16 ` Ori Kam
2019-04-18 13:16 ` [dpdk-dev] [PATCH v3 3/9] net/mlx5: add Direct Rules E-Switch support Ori Kam
2019-04-18 13:16 ` Ori Kam
2019-04-18 13:16 ` [dpdk-dev] [PATCH v3 4/9] net/mlx5: add validation for Direct Rule E-Switch Ori Kam
2019-04-18 13:16 ` Ori Kam
2019-04-18 13:16 ` [dpdk-dev] [PATCH v3 5/9] net/mlx5: add port ID item to Direct Verbs Ori Kam
2019-04-18 13:16 ` Ori Kam
2019-04-18 13:16 ` [dpdk-dev] [PATCH v3 6/9] net/mlx5: add transfer attribute to matcher Ori Kam
2019-04-18 13:16 ` Ori Kam
2019-04-18 13:16 ` [dpdk-dev] [PATCH v3 7/9] net/mlx5: add E-Switch port ID action to Direct Verbs Ori Kam
2019-04-18 13:16 ` Ori Kam
2019-04-18 13:16 ` [dpdk-dev] [PATCH v3 8/9] net/mlx5: add Forward Database table type Ori Kam
2019-04-18 13:16 ` Ori Kam
2019-04-18 13:16 ` [dpdk-dev] [PATCH v3 9/9] net/mlx5: add drop action to Direct Verbs E-Switch Ori Kam
2019-04-18 13:16 ` Ori Kam
2019-04-18 13:23 ` Yongseok Koh
2019-04-18 13:23 ` Yongseok Koh
2019-04-18 13:47 ` Ori Kam
2019-04-18 13:47 ` Ori Kam
2019-04-18 18:14 ` Shahaf Shuler
2019-04-18 18:14 ` Shahaf Shuler
2019-04-18 18:55 ` [dpdk-dev] [PATCH v3 0/9] net/mlx5: add Direct Verbs E-Switch support Shahaf Shuler
2019-04-18 18:55 ` Shahaf Shuler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190418001944.GB31179@mtidpdk.mti.labs.mlnx \
--to=yskoh@mellanox.com \
--cc=dev@dpdk.org \
--cc=matan@mellanox.com \
--cc=motih@mellanox.com \
--cc=orika@mellanox.com \
--cc=shahafs@mellanox.com \
--cc=viacheslavo@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).