Re: [dpdk-dev] ABI and inline functions

[Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>]

> > > On Wed, Apr 17, 2019 at 05:12:43AM +0000, Honnappa Nagarahalli
> wrote:
> > > > Hello,
> > > > 	There was a conversation [1] in the context of RCU library. I
> > > > thought it needs participation from broader audience. Summary for
> > > > the context (please look at [1] for full details)
> > > >
> > >
> > > Thanks for kicking off this discussion
> > >
> > > > 1) How do we provide ABI compatibility when the code base contains
> > > inline functions? Unless we freeze development in these inline
> > > functions and corresponding structures, it might not be possible to claim
> ABI compatibility.
> > > Application has to be recompiled.
> > >
> > > I agree that in some cases the application "might" need to be
> > > recompiled, but on the other hand I also think that there are many
> > > cases where ABI function versioning can still be used to mitigate
> > > things. For example, if we think of a couple of various scenarios:
> > >
> > > 1. If everything is inline and variables are allocated by app, e.g.
> > > spinlock on stack, then there is no issue as everything is
> > > application contained.
> > If there is a bug fix which requires the structure to change, the application
> would need to recompile. I guess you are talking about a scenario when
> nothing changed in the inline function/variables.
> >
> 
> If the application wants the bugfix, then yes. However, if the app is
> unaffected by the bug, then it should have the option of updating DPDK
> without a recompile.
>
Agree on the requirement.

> > >
> > > 2. If the situation is as in #1, but the structures in question are
> > > passed to non-inline DPDK functions. In this case, any changes to
> > > the structures require those functions taking the structures to be
> > > versioned for old and new structures
> > I think this can get complicated on the inline function side. The application
> and the DPDK library will end up having different inline functions. The
> changed inline function needs to be aware of 2 structure formats or the inline
> function needs to be duplicated (one for each version of the structure). I
> guess these are the workarounds we have to do.
> >
> No, there is never any need for two versions of the inline functions, only the
> newest version is needed. This is because in the case of a newly compiled
> application only the newest version of the non-inline functions is ever used.
> The other older versions are only used at runtime for compatilibity with pre-
> compiled apps with the older inlines.
> 
Since the inline function is used in the application and the DPDK (say a library), we have 2 copies of the same inline function in the final binary (1 with the application and 2nd one behind DPDK non-inline functions). When the DPDK non-inline functions are versioned, the older version of the functions have to support the old structures for the old application to work with the new DPDK. i.e. both copies of the inline function have to be the same.

> > >
> > > 3. If instead we have the case, like in rte_ring, where the data
> > > structures are allocated using functions, but they are used via
> > > inlines in the app. In this case the creation functions (and any
> > > other function using the structures) need to be versioned so that
> > > the application gets the expected structure back from the creation.
> > The new structure members have to be added such that the previous
> > layout is not affected. Either add at the end or use the gaps that are
> > left because of cache line alignment.
> >
> Not necessarily. There is nothing that requires the older and newer versions
> of a function to use the same structure. We can rename the original structure
> when versioning the old function, and then create a new structure with the
> original name for later recompiled code using the newest ABIs.
>
Agree, assuming only the app is using the inline functions.

> > >
> > > It might be useful to think of what other scenarios we have and what
> > > ones are likely to be problematic, especially those that can't be
> > > solved by having multiple function versions.
> > >
> > > > 2) Every function that is not in the direct datapath (fastpath?)
> > > > should not be inline. Exceptions or things like rx/tx burst, ring
> > > > enqueue/dequeue, and packet alloc/free - Stephen
> > >
> > > Agree with this. Anything not data path should not be inline. The
> > > next
> > Yes, very clear on this.
> >
> > > question then is for data path items how to determine whether they
> > > need to be inline or not. In general my rule-of-thumb:
> > > * anything dealing with bursts of packets should not be inline
> > > * anything what works with single packet at a time should be inline
> > >
> > > The one exception to this rule is cases where we have to consider
> > > "empty polling" as a likely use-case. For example,
> > > rte_ring_dequeue_burst works with bursts of packets, but there is a
> > > valid application use case where a thread could be polling a set of
> > > rings where only a small number are actually busy. Right now,
> > > polling an empty ring only costs a few cycles, meaning that it's
> > > neglible to have a few polls of empty rings before you get to a busy
> > > one. Having that function not-inline will cause that cost to jump
> > > significantly, so could cause problems. (This leads to the interesting
> scenario where ring enqueue is safe to un-inline, while dequeue is not).
> > A good way to think about it would be - ratio of amount of work done in
> the function to cost of function call.
> >
> 
> Yes, I would tend to agree in general.  The other thing is the frequency of
> calls, and - as already stated - whether it takes a burst of not.  Because even
> if it's a trivial function that takes only 10 cycles and we want to uninline it,
> the cost may double; but if it takes a burst of packets and is only used
> once/twice per burst the cost per packet should still only be a fraction of a
> cycle.
> 
> > >
> > > > 3) Plus synchronization routines: spin/rwlock/barrier, etc. I
> > > > think rcu should be one of such exceptions - it is just another
> > > > synchronization mechanism after all (just a bit more
> > > > sophisticated). - Konstantin
> > > >
> > > In general I believe the synchronisation primitives should be inline.
> > > However, it does come down to cost too - if a function takes 300
> > > cycles, do we really care if it takes 305 or 310 instead to make it not
> inline?
> > > Hopefully most synchronisation primitives are faster than this so
> > > this situation should not occur.
> > >
> > > > 2) and 3) can be good guidelines to what functions/APIs can be
> > > > inline. But,
> > > I believe this guideline exists today too. Are there any thoughts to
> > > change this?
> > > >
> > > > Coming to 1), I think DPDK cannot provide ABI compatibility unless
> > > > all the
> > > inline functions are converted to normal functions and symbol
> > > versioning is done for those (not bothering about performance).
> > > >
> > > I disagree. I think even in the case of #1, we should be able to
> > > manage some changes without breaking ABI.
> > I completely agree with you on trying to keep the ABI break surface small
> and doing due diligence when one is required. However, I think claiming 100%
> ABI compatibility all the time (or as frequently as other projects claim) might
> be tough. IMO, we need to look beyond this to solve the end user problem.
> May be packaging multiple LTS with distros when DPDK could not avoid
> breaking ABI compatibility?
> >
> Having multiple LTS's per distro would be nice, but it's putting a lot more
> work on the distro folks, I think.
> 
> > >
> > > > In this context, does it make sense to say that we will maintain
> > > > API compatibility rather than saying ABI compatibility? This will
> > > > also send the right message to the end users.
> > > >
> > > I would value ABI compatibility much higher than API compatibility.
> > > If someone is recompiling the application anyway, making a couple of
> > > small changes (large rework is obviously a different issue) to the
> > > code should not be a massive issue, I hope. On the other hand, ABI
> > > compatibility is needed to allow seamless update from one version to
> > > another, and it's that ABI compatiblity that allows distro's to pick up our
> latest and greatest versions.
> > >
> > I think it is also important to setup the right expectations to DPDK users. i.e.
> DPDK will police itself better to provide ABI compatibility but occasionally it
> might not be possible.
> >
> The trouble here is that a DPDK release, as a product is either backward
> compatible or not. Either a user can take it as a drop-in replacement for the
> previous version or not. Users do not want to have to go through a checklist
> for each app to see if the app uses only "compatible" APIs or not. Same for
For the releases where the ABI is broken, would not such a list help the users?

> the distro folks, they are not going to take some libs from a release but not
> others because the ABI is broken for some but not others.
Yes, this is not an option, it becomes a DPDK release of its own 😊.

> 
> Regards,
> /Bruce