[dpdk-dev] [PATCH v3 0/3] Add rte_eth_read_clock API

[Tom Barbette <barbette@kth.se>]

Some NICs allow to timestamp packets, but do not support the full
PTP synchronization process. Hence, the value set in the mbuf
timestamp field is only the raw value of an internal clock.

To make sense of this value, one at least needs to be able to query
the current hardware clock value. This patch series adds a new API to do
so, rte_eth_read_clock. As with the TSC, from there
a frequency can be derieved by querying multiple time the current value of the
internal clock with some known delay between the queries (example
provided in the API doc).

This patch series adds support of read_clock for MLX5.

An example app is provided in the rxtx_callback application.
It has been updated to display, on top of the software latency
in cycles, the total latency since the packet was received in hardware.
The API is used to compute a delta in the TX callback. The raw amount of
ticks is converted to cycles using a variation of the technique describe above.

Aside from offloading timestamping, which relieve the
software from a few operations, this allows to get much more precision
when studying the source of the latency in a system.
Eg. in our 100G, CX5 setup the rxtx callback application shows
SW latency is around 74 cycles (TSC is 3.2Ghz), but the latency
including NIC processing, PCIe, and queuing is around 196 cycles.

One may think at first this API is overlapping with te_eth_timesync_read_time.
rte_eth_timesync_read_time is clearly identified as part of a set of functions
to use PTP synchronization.
The device raw clock is not "sync" in any way. More importantly, the returned
value is not a timeval, but an amount of ticks. We could have a cast-based
solution, but on top of being an ugly solution, some people seeing the timeval
type of rte_eth_timesync_read_time could use it blindly.

Change in v2:
  - Rebase on current master

Change in v3:
  - Address comments from Ferruh Yigit

Tom Barbette (3):
  rte_ethdev: Add API function to read dev clock
  mlx5: Implement support for read_clock
  rxtx_callbacks: Add support for HW timestamp

 doc/guides/nics/features.rst                |  1 +
 doc/guides/sample_app_ug/rxtx_callbacks.rst |  9 ++-
 drivers/net/mlx5/mlx5.c                     |  1 +
 drivers/net/mlx5/mlx5.h                     |  1 +
 drivers/net/mlx5/mlx5_ethdev.c              | 30 +++++++
 drivers/net/mlx5/mlx5_glue.c                |  8 ++
 drivers/net/mlx5/mlx5_glue.h                |  2 +
 examples/rxtx_callbacks/Makefile            |  3 +
 examples/rxtx_callbacks/main.c              | 87 ++++++++++++++++++++-
 examples/rxtx_callbacks/meson.build         |  3 +
 lib/librte_ethdev/rte_ethdev.c              | 13 +++
 lib/librte_ethdev/rte_ethdev.h              | 45 +++++++++++
 lib/librte_ethdev/rte_ethdev_core.h         |  6 ++
 lib/librte_ethdev/rte_ethdev_version.map    |  2 +
 lib/librte_mbuf/rte_mbuf.h                  |  2 +
 15 files changed, 208 insertions(+), 5 deletions(-)

-- 
2.17.1