* [dpdk-dev] [PATCH] examples/ip_fragmentation: fix Tx queues init
@ 2019-05-06 9:49 Ali Alnubani
2019-05-06 9:49 ` Ali Alnubani
2019-06-04 10:42 ` [dpdk-dev] [dpdk-stable] " Thomas Monjalon
0 siblings, 2 replies; 5+ messages in thread
From: Ali Alnubani @ 2019-05-06 9:49 UTC (permalink / raw)
To: konstantin.ananyev; +Cc: dev, stable
The application tries to configure queue ids larger
than the maximum allowed by MAX_TX_QUEUE_PER_PORT. This
causes the startup error:
"
...
Initializing port 0 on lcore 0... Address:7C:FE:90:12:23:0D
txq=0,0 txq=1,1 txq=2,2 txq=3,3 txq=4,4 txq=5,5 txq=6,6 txq=7,7 txq=8,8
txq=9,9 txq=10,10 txq=11,11 txq=12,12 txq=13,13 txq=14,14 txq=15,15
txq=16,16 Invalid TX queue_id=16
EAL: Error - exiting with code: 1
Cause: rte_eth_tx_queue_setup: err=-22, port=0
"
The error reproduces when lcores aren't set, and when the
machine has more than 16 cores.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
---
examples/ip_fragmentation/main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/examples/ip_fragmentation/main.c b/examples/ip_fragmentation/main.c
index e90a61e35..953115aba 100644
--- a/examples/ip_fragmentation/main.c
+++ b/examples/ip_fragmentation/main.c
@@ -984,6 +984,9 @@ main(int argc, char **argv)
if (rte_lcore_is_enabled(lcore_id) == 0)
continue;
+ if (queueid >= rte_eth_devices[portid].data->nb_tx_queues)
+ break;
+
socket = (int) rte_lcore_to_socket_id(lcore_id);
printf("txq=%u,%d ", lcore_id, queueid);
fflush(stdout);
--
2.19.2
^ permalink raw reply [flat|nested] 5+ messages in thread
* [dpdk-dev] [PATCH] examples/ip_fragmentation: fix Tx queues init
2019-05-06 9:49 [dpdk-dev] [PATCH] examples/ip_fragmentation: fix Tx queues init Ali Alnubani
@ 2019-05-06 9:49 ` Ali Alnubani
2019-06-04 10:42 ` [dpdk-dev] [dpdk-stable] " Thomas Monjalon
1 sibling, 0 replies; 5+ messages in thread
From: Ali Alnubani @ 2019-05-06 9:49 UTC (permalink / raw)
To: konstantin.ananyev; +Cc: dev, stable
The application tries to configure queue ids larger
than the maximum allowed by MAX_TX_QUEUE_PER_PORT. This
causes the startup error:
"
...
Initializing port 0 on lcore 0... Address:7C:FE:90:12:23:0D
txq=0,0 txq=1,1 txq=2,2 txq=3,3 txq=4,4 txq=5,5 txq=6,6 txq=7,7 txq=8,8
txq=9,9 txq=10,10 txq=11,11 txq=12,12 txq=13,13 txq=14,14 txq=15,15
txq=16,16 Invalid TX queue_id=16
EAL: Error - exiting with code: 1
Cause: rte_eth_tx_queue_setup: err=-22, port=0
"
The error reproduces when lcores aren't set, and when the
machine has more than 16 cores.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
---
examples/ip_fragmentation/main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/examples/ip_fragmentation/main.c b/examples/ip_fragmentation/main.c
index e90a61e35..953115aba 100644
--- a/examples/ip_fragmentation/main.c
+++ b/examples/ip_fragmentation/main.c
@@ -984,6 +984,9 @@ main(int argc, char **argv)
if (rte_lcore_is_enabled(lcore_id) == 0)
continue;
+ if (queueid >= rte_eth_devices[portid].data->nb_tx_queues)
+ break;
+
socket = (int) rte_lcore_to_socket_id(lcore_id);
printf("txq=%u,%d ", lcore_id, queueid);
fflush(stdout);
--
2.19.2
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-dev] [dpdk-stable] [PATCH] examples/ip_fragmentation: fix Tx queues init
2019-05-06 9:49 [dpdk-dev] [PATCH] examples/ip_fragmentation: fix Tx queues init Ali Alnubani
2019-05-06 9:49 ` Ali Alnubani
@ 2019-06-04 10:42 ` Thomas Monjalon
1 sibling, 0 replies; 5+ messages in thread
From: Thomas Monjalon @ 2019-06-04 10:42 UTC (permalink / raw)
To: Ali Alnubani; +Cc: stable, konstantin.ananyev, dev
06/05/2019 11:49, Ali Alnubani:
> The application tries to configure queue ids larger
> than the maximum allowed by MAX_TX_QUEUE_PER_PORT. This
> causes the startup error:
>
> "
> ...
> Initializing port 0 on lcore 0... Address:7C:FE:90:12:23:0D
> txq=0,0 txq=1,1 txq=2,2 txq=3,3 txq=4,4 txq=5,5 txq=6,6 txq=7,7 txq=8,8
> txq=9,9 txq=10,10 txq=11,11 txq=12,12 txq=13,13 txq=14,14 txq=15,15
> txq=16,16 Invalid TX queue_id=16
>
> EAL: Error - exiting with code: 1
> Cause: rte_eth_tx_queue_setup: err=-22, port=0
> "
>
> The error reproduces when lcores aren't set, and when the
> machine has more than 16 cores.
>
> Fixes: af75078fece3 ("first public release")
> Cc: stable@dpdk.org
>
> Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Applied, thanks
^ permalink raw reply [flat|nested] 5+ messages in thread
* [dpdk-dev] [PATCH] examples/ip_fragmentation: fix Tx queues init
@ 2019-05-06 8:56 Ali Alnubani
2019-05-06 8:56 ` Ali Alnubani
0 siblings, 1 reply; 5+ messages in thread
From: Ali Alnubani @ 2019-05-06 8:56 UTC (permalink / raw)
To: konstantin.ananyev; +Cc: dev, stable
The application tries to configure queue ids larger
than the maximum allowed by MAX_TX_QUEUE_PER_PORT. This
causes the startup error:
"
...
Initializing port 0 on lcore 0... Address:7C:FE:90:12:23:0D
txq=0,0 txq=1,1 txq=2,2 txq=3,3 txq=4,4 txq=5,5 txq=6,6 txq=7,7 txq=8,8
txq=9,9 txq=10,10 txq=11,11 txq=12,12 txq=13,13 txq=14,14 txq=15,15
txq=16,16 Invalid TX queue_id=16
EAL: Error - exiting with code: 1
Cause: rte_eth_tx_queue_setup: err=-22, port=0
"
The error reproduces when lcores aren't set, and when the
machine has more than 16 cores.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
---
examples/ip_fragmentation/main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/examples/ip_fragmentation/main.c b/examples/ip_fragmentation/main.c
index e90a61e35..953115aba 100644
--- a/examples/ip_fragmentation/main.c
+++ b/examples/ip_fragmentation/main.c
@@ -984,6 +984,9 @@ main(int argc, char **argv)
if (rte_lcore_is_enabled(lcore_id) == 0)
continue;
+ if (queueid >= rte_eth_devices[portid].data->nb_tx_queues)
+ break;
+
socket = (int) rte_lcore_to_socket_id(lcore_id);
printf("txq=%u,%d ", lcore_id, queueid);
fflush(stdout);
--
2.19.2
^ permalink raw reply [flat|nested] 5+ messages in thread
* [dpdk-dev] [PATCH] examples/ip_fragmentation: fix Tx queues init
2019-05-06 8:56 [dpdk-dev] " Ali Alnubani
@ 2019-05-06 8:56 ` Ali Alnubani
0 siblings, 0 replies; 5+ messages in thread
From: Ali Alnubani @ 2019-05-06 8:56 UTC (permalink / raw)
To: konstantin.ananyev; +Cc: dev, stable
The application tries to configure queue ids larger
than the maximum allowed by MAX_TX_QUEUE_PER_PORT. This
causes the startup error:
"
...
Initializing port 0 on lcore 0... Address:7C:FE:90:12:23:0D
txq=0,0 txq=1,1 txq=2,2 txq=3,3 txq=4,4 txq=5,5 txq=6,6 txq=7,7 txq=8,8
txq=9,9 txq=10,10 txq=11,11 txq=12,12 txq=13,13 txq=14,14 txq=15,15
txq=16,16 Invalid TX queue_id=16
EAL: Error - exiting with code: 1
Cause: rte_eth_tx_queue_setup: err=-22, port=0
"
The error reproduces when lcores aren't set, and when the
machine has more than 16 cores.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
---
examples/ip_fragmentation/main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/examples/ip_fragmentation/main.c b/examples/ip_fragmentation/main.c
index e90a61e35..953115aba 100644
--- a/examples/ip_fragmentation/main.c
+++ b/examples/ip_fragmentation/main.c
@@ -984,6 +984,9 @@ main(int argc, char **argv)
if (rte_lcore_is_enabled(lcore_id) == 0)
continue;
+ if (queueid >= rte_eth_devices[portid].data->nb_tx_queues)
+ break;
+
socket = (int) rte_lcore_to_socket_id(lcore_id);
printf("txq=%u,%d ", lcore_id, queueid);
fflush(stdout);
--
2.19.2
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-06-04 10:42 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-06 9:49 [dpdk-dev] [PATCH] examples/ip_fragmentation: fix Tx queues init Ali Alnubani
2019-05-06 9:49 ` Ali Alnubani
2019-06-04 10:42 ` [dpdk-dev] [dpdk-stable] " Thomas Monjalon
-- strict thread matches above, loose matches on Subject: below --
2019-05-06 8:56 [dpdk-dev] " Ali Alnubani
2019-05-06 8:56 ` Ali Alnubani
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).