* [dpdk-dev] [PATCH v1 1/2] app: update usage field
@ 2019-05-07 6:51 Vipin Varghese
2019-05-07 6:51 ` Vipin Varghese
2019-05-07 6:51 ` [dpdk-dev] [PATCH v1 2/2] doc: update usage field for port-queue Vipin Varghese
0 siblings, 2 replies; 8+ messages in thread
From: Vipin Varghese @ 2019-05-07 6:51 UTC (permalink / raw)
To: dev, marko.kovacevic, john.mcnamara, ramirose,
pablo.de.lara.guarch, bruce.richardson
Cc: sanjay.padubidri, Vipin Varghese
Usage option q is reflect how many port-queue pair can run per lcore. In
l2fwd, l2fwd-crypto, l2fwd-jobstats, and l2fwd-keepalive both RX and TX
are configured to be one.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
---
examples/l2fwd-crypto/main.c | 2 +-
examples/l2fwd-jobstats/main.c | 2 +-
examples/l2fwd-keepalive/main.c | 2 +-
examples/l2fwd/main.c | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/examples/l2fwd-crypto/main.c b/examples/l2fwd-crypto/main.c
index 06517b471..30c85d1ce 100644
--- a/examples/l2fwd-crypto/main.c
+++ b/examples/l2fwd-crypto/main.c
@@ -955,7 +955,7 @@ l2fwd_crypto_usage(const char *prgname)
{
printf("%s [EAL options] --\n"
" -p PORTMASK: hexadecimal bitmask of ports to configure\n"
- " -q NQ: number of queue (=ports) per lcore (default is 1)\n"
+ " -q NQ: number of ports per lcore (default is 1)\n"
" -s manage all ports from single lcore\n"
" -T PERIOD: statistics will be refreshed each PERIOD seconds"
" (0 to disable, 10 default, 86400 maximum)\n"
diff --git a/examples/l2fwd-jobstats/main.c b/examples/l2fwd-jobstats/main.c
index a4d28e178..7841adf99 100644
--- a/examples/l2fwd-jobstats/main.c
+++ b/examples/l2fwd-jobstats/main.c
@@ -547,7 +547,7 @@ l2fwd_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
" -p PORTMASK: hexadecimal bitmask of ports to configure\n"
- " -q NQ: number of queue (=ports) per lcore (default is 1)\n"
+ " -q NQ: number of ports per lcore (default is 1)\n"
" -T PERIOD: statistics will be refreshed each PERIOD seconds (0 to disable, 10 default, 86400 maximum)\n"
" -l set system default locale instead of default (\"C\" locale) for thousands separator in stats.",
prgname);
diff --git a/examples/l2fwd-keepalive/main.c b/examples/l2fwd-keepalive/main.c
index 0bf2b5336..fa0f5848a 100644
--- a/examples/l2fwd-keepalive/main.c
+++ b/examples/l2fwd-keepalive/main.c
@@ -290,7 +290,7 @@ l2fwd_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
" -p PORTMASK: hexadecimal bitmask of ports to configure\n"
- " -q NQ: number of queue (=ports) per lcore (default is 1)\n"
+ " -q NQ: number of ports per lcore (default is 1)\n"
" -K PERIOD: Keepalive check period (5 default; 86400 max)\n"
" -T PERIOD: statistics will be refreshed each PERIOD seconds (0 to disable, 10 default, 86400 maximum)\n",
prgname);
diff --git a/examples/l2fwd/main.c b/examples/l2fwd/main.c
index 6c23215a5..7694d42e6 100644
--- a/examples/l2fwd/main.c
+++ b/examples/l2fwd/main.c
@@ -293,7 +293,7 @@ l2fwd_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
" -p PORTMASK: hexadecimal bitmask of ports to configure\n"
- " -q NQ: number of queue (=ports) per lcore (default is 1)\n"
+ " -q NQ: number of ports per lcore (default is 1)\n"
" -T PERIOD: statistics will be refreshed each PERIOD seconds (0 to disable, 10 default, 86400 maximum)\n"
" --[no-]mac-updating: Enable or disable MAC addresses updating (enabled by default)\n"
" When enabled:\n"
--
2.17.1
^ permalink raw reply [flat|nested] 8+ messages in thread* [dpdk-dev] [PATCH v1 1/2] app: update usage field
2019-05-07 6:51 [dpdk-dev] [PATCH v1 1/2] app: update usage field Vipin Varghese
@ 2019-05-07 6:51 ` Vipin Varghese
2019-05-07 6:51 ` [dpdk-dev] [PATCH v1 2/2] doc: update usage field for port-queue Vipin Varghese
1 sibling, 0 replies; 8+ messages in thread
From: Vipin Varghese @ 2019-05-07 6:51 UTC (permalink / raw)
To: dev, marko.kovacevic, john.mcnamara, ramirose,
pablo.de.lara.guarch, bruce.richardson
Cc: sanjay.padubidri, Vipin Varghese
Usage option q is reflect how many port-queue pair can run per lcore. In
l2fwd, l2fwd-crypto, l2fwd-jobstats, and l2fwd-keepalive both RX and TX
are configured to be one.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
---
examples/l2fwd-crypto/main.c | 2 +-
examples/l2fwd-jobstats/main.c | 2 +-
examples/l2fwd-keepalive/main.c | 2 +-
examples/l2fwd/main.c | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/examples/l2fwd-crypto/main.c b/examples/l2fwd-crypto/main.c
index 06517b471..30c85d1ce 100644
--- a/examples/l2fwd-crypto/main.c
+++ b/examples/l2fwd-crypto/main.c
@@ -955,7 +955,7 @@ l2fwd_crypto_usage(const char *prgname)
{
printf("%s [EAL options] --\n"
" -p PORTMASK: hexadecimal bitmask of ports to configure\n"
- " -q NQ: number of queue (=ports) per lcore (default is 1)\n"
+ " -q NQ: number of ports per lcore (default is 1)\n"
" -s manage all ports from single lcore\n"
" -T PERIOD: statistics will be refreshed each PERIOD seconds"
" (0 to disable, 10 default, 86400 maximum)\n"
diff --git a/examples/l2fwd-jobstats/main.c b/examples/l2fwd-jobstats/main.c
index a4d28e178..7841adf99 100644
--- a/examples/l2fwd-jobstats/main.c
+++ b/examples/l2fwd-jobstats/main.c
@@ -547,7 +547,7 @@ l2fwd_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
" -p PORTMASK: hexadecimal bitmask of ports to configure\n"
- " -q NQ: number of queue (=ports) per lcore (default is 1)\n"
+ " -q NQ: number of ports per lcore (default is 1)\n"
" -T PERIOD: statistics will be refreshed each PERIOD seconds (0 to disable, 10 default, 86400 maximum)\n"
" -l set system default locale instead of default (\"C\" locale) for thousands separator in stats.",
prgname);
diff --git a/examples/l2fwd-keepalive/main.c b/examples/l2fwd-keepalive/main.c
index 0bf2b5336..fa0f5848a 100644
--- a/examples/l2fwd-keepalive/main.c
+++ b/examples/l2fwd-keepalive/main.c
@@ -290,7 +290,7 @@ l2fwd_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
" -p PORTMASK: hexadecimal bitmask of ports to configure\n"
- " -q NQ: number of queue (=ports) per lcore (default is 1)\n"
+ " -q NQ: number of ports per lcore (default is 1)\n"
" -K PERIOD: Keepalive check period (5 default; 86400 max)\n"
" -T PERIOD: statistics will be refreshed each PERIOD seconds (0 to disable, 10 default, 86400 maximum)\n",
prgname);
diff --git a/examples/l2fwd/main.c b/examples/l2fwd/main.c
index 6c23215a5..7694d42e6 100644
--- a/examples/l2fwd/main.c
+++ b/examples/l2fwd/main.c
@@ -293,7 +293,7 @@ l2fwd_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
" -p PORTMASK: hexadecimal bitmask of ports to configure\n"
- " -q NQ: number of queue (=ports) per lcore (default is 1)\n"
+ " -q NQ: number of ports per lcore (default is 1)\n"
" -T PERIOD: statistics will be refreshed each PERIOD seconds (0 to disable, 10 default, 86400 maximum)\n"
" --[no-]mac-updating: Enable or disable MAC addresses updating (enabled by default)\n"
" When enabled:\n"
--
2.17.1
^ permalink raw reply [flat|nested] 8+ messages in thread* [dpdk-dev] [PATCH v1 2/2] doc: update usage field for port-queue
2019-05-07 6:51 [dpdk-dev] [PATCH v1 1/2] app: update usage field Vipin Varghese
2019-05-07 6:51 ` Vipin Varghese
@ 2019-05-07 6:51 ` Vipin Varghese
2019-05-07 6:51 ` Vipin Varghese
` (2 more replies)
1 sibling, 3 replies; 8+ messages in thread
From: Vipin Varghese @ 2019-05-07 6:51 UTC (permalink / raw)
To: dev, marko.kovacevic, john.mcnamara, ramirose,
pablo.de.lara.guarch, bruce.richardson
Cc: sanjay.padubidri, Vipin Varghese
Usage option q is reflect how many port-queue pair can run per lcore.
Updating usage field to refelct port-queue is done for one RX and TX
only.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
---
doc/guides/sample_app_ug/l2_forward_crypto.rst | 4 +++-
doc/guides/sample_app_ug/l2_forward_job_stats.rst | 6 +++++-
doc/guides/sample_app_ug/l2_forward_real_virtual.rst | 6 +++++-
3 files changed, 13 insertions(+), 3 deletions(-)
diff --git a/doc/guides/sample_app_ug/l2_forward_crypto.rst b/doc/guides/sample_app_ug/l2_forward_crypto.rst
index e8d52dad2..c6b4e900f 100644
--- a/doc/guides/sample_app_ug/l2_forward_crypto.rst
+++ b/doc/guides/sample_app_ug/l2_forward_crypto.rst
@@ -55,7 +55,7 @@ where,
* p PORTMASK: A hexadecimal bitmask of the ports to configure (default is all the ports)
-* q NQ: A number of queues (=ports) per lcore (default is 1)
+* q NQ: A number of ports per lcore (default is 1)
* s: manage all ports from single core
@@ -180,6 +180,8 @@ and the Environment Abstraction Layer (EAL) options.
* All crypto devices shall use the same session.
+ * DPDK port-queue pair configured is only one for both RX and TX.
+
Explanation
-----------
diff --git a/doc/guides/sample_app_ug/l2_forward_job_stats.rst b/doc/guides/sample_app_ug/l2_forward_job_stats.rst
index dfc1ed9ca..81951a04d 100644
--- a/doc/guides/sample_app_ug/l2_forward_job_stats.rst
+++ b/doc/guides/sample_app_ug/l2_forward_job_stats.rst
@@ -87,7 +87,7 @@ where,
* p PORTMASK: A hexadecimal bitmask of the ports to configure
-* q NQ: A number of queues (=ports) per lcore (default is 1)
+* q NQ: A number of ports per lcore (default is 1)
* l: Use locale thousands separator when formatting big numbers.
@@ -101,6 +101,10 @@ thousands separator printing, issue the command:
Refer to the *DPDK Getting Started Guide* for general information on running applications
and the Environment Abstraction Layer (EAL) options.
+.. note::
+
+ DPDK port-queue pair configured is only one for both RX and TX.
+
Explanation
-----------
diff --git a/doc/guides/sample_app_ug/l2_forward_real_virtual.rst b/doc/guides/sample_app_ug/l2_forward_real_virtual.rst
index e5b28e425..d0da37db7 100644
--- a/doc/guides/sample_app_ug/l2_forward_real_virtual.rst
+++ b/doc/guides/sample_app_ug/l2_forward_real_virtual.rst
@@ -97,7 +97,7 @@ where,
* p PORTMASK: A hexadecimal bitmask of the ports to configure
-* q NQ: A number of queues (=ports) per lcore (default is 1)
+* q NQ: A number of ports per lcore (default is 1)
* --[no-]mac-updating: Enable or disable MAC addresses updating (enabled by default).
@@ -111,6 +111,10 @@ updating enabled, issue the command:
Refer to the *DPDK Getting Started Guide* for general information on running applications
and the Environment Abstraction Layer (EAL) options.
+.. note::
+
+ DPDK port-queue pair configured is only one for both RX and TX.
+
Explanation
-----------
--
2.17.1
^ permalink raw reply [flat|nested] 8+ messages in thread* [dpdk-dev] [PATCH v1 2/2] doc: update usage field for port-queue
2019-05-07 6:51 ` [dpdk-dev] [PATCH v1 2/2] doc: update usage field for port-queue Vipin Varghese
@ 2019-05-07 6:51 ` Vipin Varghese
2019-05-07 15:07 ` Mcnamara, John
2019-07-08 19:45 ` Thomas Monjalon
2 siblings, 0 replies; 8+ messages in thread
From: Vipin Varghese @ 2019-05-07 6:51 UTC (permalink / raw)
To: dev, marko.kovacevic, john.mcnamara, ramirose,
pablo.de.lara.guarch, bruce.richardson
Cc: sanjay.padubidri, Vipin Varghese
Usage option q is reflect how many port-queue pair can run per lcore.
Updating usage field to refelct port-queue is done for one RX and TX
only.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
---
doc/guides/sample_app_ug/l2_forward_crypto.rst | 4 +++-
doc/guides/sample_app_ug/l2_forward_job_stats.rst | 6 +++++-
doc/guides/sample_app_ug/l2_forward_real_virtual.rst | 6 +++++-
3 files changed, 13 insertions(+), 3 deletions(-)
diff --git a/doc/guides/sample_app_ug/l2_forward_crypto.rst b/doc/guides/sample_app_ug/l2_forward_crypto.rst
index e8d52dad2..c6b4e900f 100644
--- a/doc/guides/sample_app_ug/l2_forward_crypto.rst
+++ b/doc/guides/sample_app_ug/l2_forward_crypto.rst
@@ -55,7 +55,7 @@ where,
* p PORTMASK: A hexadecimal bitmask of the ports to configure (default is all the ports)
-* q NQ: A number of queues (=ports) per lcore (default is 1)
+* q NQ: A number of ports per lcore (default is 1)
* s: manage all ports from single core
@@ -180,6 +180,8 @@ and the Environment Abstraction Layer (EAL) options.
* All crypto devices shall use the same session.
+ * DPDK port-queue pair configured is only one for both RX and TX.
+
Explanation
-----------
diff --git a/doc/guides/sample_app_ug/l2_forward_job_stats.rst b/doc/guides/sample_app_ug/l2_forward_job_stats.rst
index dfc1ed9ca..81951a04d 100644
--- a/doc/guides/sample_app_ug/l2_forward_job_stats.rst
+++ b/doc/guides/sample_app_ug/l2_forward_job_stats.rst
@@ -87,7 +87,7 @@ where,
* p PORTMASK: A hexadecimal bitmask of the ports to configure
-* q NQ: A number of queues (=ports) per lcore (default is 1)
+* q NQ: A number of ports per lcore (default is 1)
* l: Use locale thousands separator when formatting big numbers.
@@ -101,6 +101,10 @@ thousands separator printing, issue the command:
Refer to the *DPDK Getting Started Guide* for general information on running applications
and the Environment Abstraction Layer (EAL) options.
+.. note::
+
+ DPDK port-queue pair configured is only one for both RX and TX.
+
Explanation
-----------
diff --git a/doc/guides/sample_app_ug/l2_forward_real_virtual.rst b/doc/guides/sample_app_ug/l2_forward_real_virtual.rst
index e5b28e425..d0da37db7 100644
--- a/doc/guides/sample_app_ug/l2_forward_real_virtual.rst
+++ b/doc/guides/sample_app_ug/l2_forward_real_virtual.rst
@@ -97,7 +97,7 @@ where,
* p PORTMASK: A hexadecimal bitmask of the ports to configure
-* q NQ: A number of queues (=ports) per lcore (default is 1)
+* q NQ: A number of ports per lcore (default is 1)
* --[no-]mac-updating: Enable or disable MAC addresses updating (enabled by default).
@@ -111,6 +111,10 @@ updating enabled, issue the command:
Refer to the *DPDK Getting Started Guide* for general information on running applications
and the Environment Abstraction Layer (EAL) options.
+.. note::
+
+ DPDK port-queue pair configured is only one for both RX and TX.
+
Explanation
-----------
--
2.17.1
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [dpdk-dev] [PATCH v1 2/2] doc: update usage field for port-queue
2019-05-07 6:51 ` [dpdk-dev] [PATCH v1 2/2] doc: update usage field for port-queue Vipin Varghese
2019-05-07 6:51 ` Vipin Varghese
@ 2019-05-07 15:07 ` Mcnamara, John
2019-05-07 15:07 ` Mcnamara, John
2019-07-08 19:45 ` Thomas Monjalon
2 siblings, 1 reply; 8+ messages in thread
From: Mcnamara, John @ 2019-05-07 15:07 UTC (permalink / raw)
To: Varghese, Vipin, dev, Kovacevic, Marko, ramirose, De Lara Guarch,
Pablo, Richardson, Bruce
Cc: Padubidri, Sanjay A
> -----Original Message-----
> From: Varghese, Vipin
> Sent: Tuesday, May 7, 2019 7:52 AM
> To: dev@dpdk.org; Kovacevic, Marko <marko.kovacevic@intel.com>; Mcnamara,
> John <john.mcnamara@intel.com>; ramirose@gmail.com; De Lara Guarch, Pablo
> <pablo.de.lara.guarch@intel.com>; Richardson, Bruce
> <bruce.richardson@intel.com>
> Cc: Padubidri, Sanjay A <sanjay.padubidri@intel.com>; Varghese, Vipin
> <vipin.varghese@intel.com>
> Subject: [PATCH v1 2/2] doc: update usage field for port-queue
>
> Usage option q is reflect how many port-queue pair can run per lcore.
> Updating usage field to refelct port-queue is done for one RX and TX only.
>
Acked-by: John McNamara <john.mcnamara@intel.com>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [dpdk-dev] [PATCH v1 2/2] doc: update usage field for port-queue
2019-05-07 15:07 ` Mcnamara, John
@ 2019-05-07 15:07 ` Mcnamara, John
0 siblings, 0 replies; 8+ messages in thread
From: Mcnamara, John @ 2019-05-07 15:07 UTC (permalink / raw)
To: Varghese, Vipin, dev, Kovacevic, Marko, ramirose, De Lara Guarch,
Pablo, Richardson, Bruce
Cc: Padubidri, Sanjay A
> -----Original Message-----
> From: Varghese, Vipin
> Sent: Tuesday, May 7, 2019 7:52 AM
> To: dev@dpdk.org; Kovacevic, Marko <marko.kovacevic@intel.com>; Mcnamara,
> John <john.mcnamara@intel.com>; ramirose@gmail.com; De Lara Guarch, Pablo
> <pablo.de.lara.guarch@intel.com>; Richardson, Bruce
> <bruce.richardson@intel.com>
> Cc: Padubidri, Sanjay A <sanjay.padubidri@intel.com>; Varghese, Vipin
> <vipin.varghese@intel.com>
> Subject: [PATCH v1 2/2] doc: update usage field for port-queue
>
> Usage option q is reflect how many port-queue pair can run per lcore.
> Updating usage field to refelct port-queue is done for one RX and TX only.
>
Acked-by: John McNamara <john.mcnamara@intel.com>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [dpdk-dev] [PATCH v1 2/2] doc: update usage field for port-queue
2019-05-07 6:51 ` [dpdk-dev] [PATCH v1 2/2] doc: update usage field for port-queue Vipin Varghese
2019-05-07 6:51 ` Vipin Varghese
2019-05-07 15:07 ` Mcnamara, John
@ 2019-07-08 19:45 ` Thomas Monjalon
2019-07-30 11:27 ` Mcnamara, John
2 siblings, 1 reply; 8+ messages in thread
From: Thomas Monjalon @ 2019-07-08 19:45 UTC (permalink / raw)
To: Vipin Varghese
Cc: dev, marko.kovacevic, john.mcnamara, ramirose,
pablo.de.lara.guarch, bruce.richardson, sanjay.padubidri
07/05/2019 08:51, Vipin Varghese:
> Usage option q is reflect how many port-queue pair can run per lcore.
> Updating usage field to refelct port-queue is done for one RX and TX
> only.
>
> Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
> ---
> +.. note::
> +
> + DPDK port-queue pair configured is only one for both RX and TX.
Sorry I don't understand what it means.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [dpdk-dev] [PATCH v1 2/2] doc: update usage field for port-queue
2019-07-08 19:45 ` Thomas Monjalon
@ 2019-07-30 11:27 ` Mcnamara, John
0 siblings, 0 replies; 8+ messages in thread
From: Mcnamara, John @ 2019-07-30 11:27 UTC (permalink / raw)
To: Thomas Monjalon, Varghese, Vipin
Cc: dev, Kovacevic, Marko, ramirose, De Lara Guarch, Pablo,
Richardson, Bruce, Padubidri, Sanjay A
> -----Original Message-----
> From: Thomas Monjalon [mailto:thomas@monjalon.net]
> Sent: Monday, July 8, 2019 8:45 PM
> To: Varghese, Vipin <vipin.varghese@intel.com>
> Cc: dev@dpdk.org; Kovacevic, Marko <marko.kovacevic@intel.com>; Mcnamara,
> John <john.mcnamara@intel.com>; ramirose@gmail.com; De Lara Guarch, Pablo
> <pablo.de.lara.guarch@intel.com>; Richardson, Bruce
> <bruce.richardson@intel.com>; Padubidri, Sanjay A
> <sanjay.padubidri@intel.com>
> Subject: Re: [dpdk-dev] [PATCH v1 2/2] doc: update usage field for port-
> queue
>
> 07/05/2019 08:51, Vipin Varghese:
> > Usage option q is reflect how many port-queue pair can run per lcore.
> > Updating usage field to refelct port-queue is done for one RX and TX
> > only.
> >
> > Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
> > ---
> > +.. note::
> > +
> > + DPDK port-queue pair configured is only one for both RX and TX.
>
> Sorry I don't understand what it means.
>
Maybe something like:
The configured DPDK port-queue pair is used for both Rx and Tx.
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-07-30 11:27 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-07 6:51 [dpdk-dev] [PATCH v1 1/2] app: update usage field Vipin Varghese
2019-05-07 6:51 ` Vipin Varghese
2019-05-07 6:51 ` [dpdk-dev] [PATCH v1 2/2] doc: update usage field for port-queue Vipin Varghese
2019-05-07 6:51 ` Vipin Varghese
2019-05-07 15:07 ` Mcnamara, John
2019-05-07 15:07 ` Mcnamara, John
2019-07-08 19:45 ` Thomas Monjalon
2019-07-30 11:27 ` Mcnamara, John
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).