Re: [dpdk-dev] [PATCH v4 1/2] examples/ipsec-secgw: fix 1st packet dropped for inline crypto

["Ananyev, Konstantin" <konstantin.ananyev@intel.com>]

> > > > > > > Subject: RE: [PATCH v4 1/2] examples/ipsec-secgw: fix 1st
> > > > > > > packet
> > > dropped
> > > > > for
> > > > > > > inline crypto
> > > > > > >
> > > > > > > Hi Bernard,
> > > > > > >
> > > > > > > > -       RTE_LOG_DP(DEBUG, IPSEC, "Create session for SA spi %u on
> > > > > cryptodev "
> > > > > > > > -                       "%u qp %u\n", sa->spi,
> > > > > > > > -                       ipsec_ctx->tbl[cdev_id_qp].id,
> > > > > > > > -                       ipsec_ctx->tbl[cdev_id_qp].qp);
> > > > > > > > +       if ((sa == NULL) || (pool == NULL))
> > > > > > > > +               return -EINVAL;
> > > > > > > >
> > > > > > > > -       if (sa->type != RTE_SECURITY_ACTION_TYPE_NONE) {
> > > > > > > > -               struct rte_security_session_conf sess_conf = {
> > > > > > > > +       struct rte_security_session_conf sess_conf = {
> > > > > > > >                         .action_type = sa->type,
> > > > > > > >                         .protocol = RTE_SECURITY_PROTOCOL_IPSEC,
> > > > > > > >                         {.ipsec = { @@ -90,247 +65,340 @@
> > > > > > > > create_session(struct ipsec_ctx *ipsec_ctx,
> > > > > struct
> > > > > > > > ipsec_sa *sa)
> > > > > > > >                         } },
> > > > > > > >                         .crypto_xform = sa->xforms,
> > > > > > > >                         .userdata = NULL,
> > > > > > > > -
> > > > > > > >                 };
> > > > > > > >
> > > > > > > > -               if (sa->type ==
> > > > > > > RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL)
> > > > > > > > {
> > > > > > > > -                       struct rte_security_ctx *ctx = (struct rte_security_ctx *)
> > > > > > > > -                                                       rte_cryptodev_get_sec_ctx(
> > > > > > > > -                                                       ipsec_ctx->tbl[cdev_id_qp].id);
> > > > > > > > -
> > > > > > > > -                       /* Set IPsec parameters in conf */
> > > > > > > > -                       set_ipsec_conf(sa, &(sess_conf.ipsec));
> > > > > > > > -
> > > > > > > > -                       sa->sec_session = rte_security_session_create(ctx,
> > > > > > > > -                                       &sess_conf, ipsec_ctx->session_pool);
> > > > > > > > -                       if (sa->sec_session == NULL) {
> > > > > > > > -                               RTE_LOG(ERR, IPSEC,
> > > > > > > > -                               "SEC Session init failed: err: %d\n", ret);
> > > > > > > > -                               return -1;
> > > > > > > > -                       }
> > > > > > > > -               } else if (sa->type ==
> > > > > RTE_SECURITY_ACTION_TYPE_INLINE_CRYPTO)
> > > > > > > {
> > > > > > > > -                       struct rte_flow_error err;
> > > > > > > > -                       struct rte_security_ctx *ctx = (struct rte_security_ctx *)
> > > > > > > > -                                                       rte_eth_dev_get_sec_ctx(
> > > > > > > > -                                                       sa->portid);
> > > > > > > > -                       const struct rte_security_capability *sec_cap;
> > > > > > > > -                       int ret = 0;
> > > > > > > > -
> > > > > > > > -                       sa->sec_session = rte_security_session_create(ctx,
> > > > > > > > -                                       &sess_conf, ipsec_ctx->session_pool);
> > > > > > > > -                       if (sa->sec_session == NULL) {
> > > > > > > > -                               RTE_LOG(ERR, IPSEC,
> > > > > > > > -                               "SEC Session init failed: err: %d\n", ret);
> > > > > > > > -                               return -1;
> > > > > > > > -                       }
> > > > > > > > +       if (sa->type ==
> > > > > RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL) {
> > > > > > > > +               ctx = (struct rte_security_ctx *)
> > > > > > > > +
> > > > > > > > + rte_eth_dev_get_sec_ctx(sa->portid);
> > > > > > >
> > > > > > > This is breaking the lookaside mode. Ctx was retrieved using
> > > > > > > the
> > > ipsec_ctx-
> > > > > >tbl
> > > > > > > struct rte_security_ctx *ctx = (struct rte_security_ctx *)
> > > > > > > 				rte_cryptodev_get_sec_ctx(
> > > > > > > 				ipsec_ctx->tbl[cdev_id_qp].id);
> > > > > > >
> > > > > > > I am looking into it, but I don't have time left to get it integrated in RC2.
> > > So
> > > > > this
> > > > > > > has to be pushed to RC3
> > > > > >
> > > > > > It looks like there are multiple issues in this patch wrt
> > > > > > lookaside and none
> > > cases.
> > > > > Only the inline cases seem to be working.
> > > > > >
> > > > > > 1. the patch removes the cdev_mapping concept completely.
> > > > > > Cdev_id_qp is
> > > > > not getting used.
> > > > >
> > > > > Not exactly.
> > > > > cdev_id_qp is still setup, and is still used to decide to which
> > > > > crypto-dev to enqueuer the crypto-op:
> > > > > ipsec_enqueue(...)
> > > > > {
> > > > >    ...
> > > > >    enqueue_cop(&ipsec_ctx->tbl[sa->cdev_id_qp], &priv->cop);
> > > >
> > > > I don't see anybody filling "sa->cdev_id_qp". Please let me know if
> > > > I have
> > > missed it somewhere.
> > > > It is memset to 0 I guess.
> > >
> > >
> > > Yep, true we lost it somewhere during the rework.
> > >
> > > >
> > > > >
> > > > >
> > > > > Same in ipsec_process().
> > > > >
> > > > > For initialization, yes cdev_id_qp is not used anymore.
> > > > > As discussed here:
> > > > >
> > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fmail
> > > s.dp
> > > > > dk.org%2Farchives%2Fdev%2F2019-
> > > > >
> > >
> > March%2F127725.html&data=02%7C01%7Cakhil.goyal%40nxp.com%7C04
> > > > >
> > >
> > 194193cfc04c0b629008d6c7eea247%7C686ea1d3bc2b4c6fa92cd99c5c301635%
> > > > >
> > >
> > 7C0%7C0%7C636916225072561313&sdata=ga9IiqhYRWOz9QkRDIXNiigInk
> > > > > soVGgu1E5EetqvE%2FA%3D&reserved=0
> > > > >
> > > > > I think the problem you are hitting with lookaside-proto is that
> > > > > for it we use 2 different values here:
> > > > > a) In create_sec_session we use portid (it also should be
> > > > > rte_cryptodev_get_sec_ctx() here)
> > > > >     if (sa->type == RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL) {
> > > > >                 ctx = (struct rte_security_ctx *)
> > > > >
> > > > > rte_eth_dev_get_sec_ctx(sa->portid);
> > > > It should be rte_cryptodev_get_sec_ctx in the first place. And it
> > > > needs a
> > > cdev_id as input based on the cdev mapping done while initializing
> > > > the cryptodev and neither the portid and nor cdev_id_qp.
> > > > > b) in enqueue() we use cdev_id_qp
> > > > >
> > > > > Right now these values could be different.
> > > > > As I understand we need to make sure that fro lookaside-proto
> > > > > cdev_id_qp
> > > ==
> > > > > portid provided by user, correct?
> > > > No it is not the case. Right now for lookaside there is no use of
> > > > portid in case
> > > of lookaside case.
> > > > As the cdev/qp/core mappings are managed internally and the user
> > > > cannot
> > > tweak it from cfg file.
> > > >
> > >
> > >
> > > Hmm, then at least that line  is wrong here:
> > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdoc.
> > > dpdk
> > >
> > .org%2Fguides%2Fsample_app_ug%2Fipsec_secgw.html&data=02%7C01%
> > >
> > 7Cakhil.goyal%40nxp.com%7Cb1e931a9967943887a0c08d6c7f49d28%7C686ea
> > >
> > 1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C636916250754452306&sda
> > >
> > ta=tNjHCO0O2rfh8shhQXu93qrM0Hr0OZVXUVhMcsg53dw%3D&reserved=
> > > 0
> > >
> > > sa out 5 cipher_algo aes-128-cbc cipher_key
> > > 0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0 \ auth_algo sha1-hmac auth_key
> > > 0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0 \ mode ipv4-tunnel src
> > > 172.16.1.5 dst 172.16.2.5 \ type lookaside-protocol-offload port_id 4
> > >
> > > And probably:
> > > "Port/device ID of the ethernet/crypto accelerator for which the SA is
> > > configured."
> > > Need to be rephrased to remove crypto accelerator notice.
> > Yes.
> >
> > >
> > > Another question - why you guys don't consider using portid for lookaside-
> > proto?
> > > As I can see add_mapping(function that  fills cdev_id_qp) doesn't
> > > bother to check which rte_security protocols are supported (only
> > > crypto capabilities are checked).
> > > So not sure does current code will work ok with a mix of lookaside-
> > > none/lookaside-proto devices.
> > > Forcing user to specify crypto-dev id for lookaside-proto (via portid
> > > or so) will simplify things significantly.
> > I will think about it. Actually initially when portid was introduced, the intent was
> > same but it did not work well.
> > Because there may be a case of a cryptodev with multiple queues, so there will
> > be a mapping done internally in the application and matching it with the user
> > provided portid will be difficult.
> >
> > I believe that this could be done but would need some rework.
> >
> > >
> > > Konstantin
> 
> Could we consider going back to the V2 version of this patch set which fixed the issue with the inline code and left the lookaside code
> unchanged?

Actually I have the same thoughts here:
considering the problems with lookaside-proto, it seems more pragmatic 
to fix it as was suggested in V2:
split create_session() into 2 functions, and invoke create_session_inline() at startup,
while keeping create_session_lookaside() invocation at runtime.
At least it would fix the issue in a clean way.
If later ipsec-secgw will be reworked to allow lookaside session creation at init time,
we can merge them back. 
Konstantin 

> 
> We are not in a position test any changes to the lookaside code.
> 
> Regards,
> 
> Bernard.
>