DPDK patches and discussions
 help / color / mirror / Atom feed
From: <pbhagavatula@marvell.com>
To: <jerinj@marvell.com>, Pavan Nikhilesh <pbhagavatula@marvell.com>
Cc: <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH 23/44] event/octeontx2: add devargs to control SSO GGRP QoS
Date: Sun, 2 Jun 2019 00:23:33 +0530	[thread overview]
Message-ID: <20190601185355.370-24-pbhagavatula@marvell.com> (raw)
In-Reply-To: <20190601185355.370-1-pbhagavatula@marvell.com>

From: Pavan Nikhilesh <pbhagavatula@marvell.com>

SSO GGRPs i.e. queue uses DRAM & SRAM buffers to hold in-flight
events. By default the buffers are assigned to the SSO GGRPs to
satisfy minimum HW requirements. SSO is free to assign the remaining
buffers to GGRPs based on a preconfigured threshold.
We can control the QoS of SSO GGRP by modifying the above mentioned
thresholds. GGRPs that have higher importance can be assigned higher
thresholds than the rest.

Example:
	--dev "0002:0e:00.0,qos=[1-50-50-50]" // [Qx-XAQ-TAQ-IAQ]

Qx  -> Event queue Aka SSO GGRP.
XAQ -> DRAM In-flights.
TAQ & IAQ -> SRAM In-flights.

The values need to be expressed in terms of percentages, 0 represents
default.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
---
 drivers/event/octeontx2/otx2_evdev.c | 104 ++++++++++++++++++++++++++-
 drivers/event/octeontx2/otx2_evdev.h |   9 +++
 2 files changed, 112 insertions(+), 1 deletion(-)

diff --git a/drivers/event/octeontx2/otx2_evdev.c b/drivers/event/octeontx2/otx2_evdev.c
index 51d1a45c6..438bfcb9f 100644
--- a/drivers/event/octeontx2/otx2_evdev.c
+++ b/drivers/event/octeontx2/otx2_evdev.c
@@ -929,6 +929,34 @@ otx2_handle_event(void *arg, struct rte_event event)
 				event, event_dev->data->dev_stop_flush_arg);
 }
 
+static void
+sso_qos_cfg(struct rte_eventdev *event_dev)
+{
+	struct otx2_sso_evdev *dev = sso_pmd_priv(event_dev);
+	struct sso_grp_qos_cfg *req;
+	uint16_t i;
+
+	for (i = 0; i < dev->qos_queue_cnt; i++) {
+		uint8_t xaq_prcnt = dev->qos_parse_data[i].xaq_prcnt;
+		uint8_t iaq_prcnt = dev->qos_parse_data[i].iaq_prcnt;
+		uint8_t taq_prcnt = dev->qos_parse_data[i].taq_prcnt;
+
+		if (dev->qos_parse_data[i].queue >= dev->nb_event_queues)
+			continue;
+
+		req = otx2_mbox_alloc_msg_sso_grp_qos_config(dev->mbox);
+		req->xaq_limit = (dev->nb_xaq_cfg *
+				  (xaq_prcnt ? xaq_prcnt : 100)) / 100;
+		req->taq_thr = (SSO_HWGRP_IAQ_MAX_THR_MASK *
+				(iaq_prcnt ? iaq_prcnt : 100)) / 100;
+		req->iaq_thr = (SSO_HWGRP_TAQ_MAX_THR_MASK *
+				(taq_prcnt ? taq_prcnt : 100)) / 100;
+	}
+
+	if (dev->qos_queue_cnt)
+		otx2_mbox_process(dev->mbox);
+}
+
 static void
 sso_cleanup(struct rte_eventdev *event_dev, uint8_t enable)
 {
@@ -1000,6 +1028,7 @@ static int
 otx2_sso_start(struct rte_eventdev *event_dev)
 {
 	sso_func_trace();
+	sso_qos_cfg(event_dev);
 	sso_cleanup(event_dev, 1);
 	sso_fastpath_fns_set(event_dev);
 
@@ -1030,6 +1059,76 @@ static struct rte_eventdev_ops otx2_sso_ops = {
 
 #define OTX2_SSO_XAE_CNT	"xae_cnt"
 #define OTX2_SSO_SINGLE_WS	"single_ws"
+#define OTX2_SSO_GGRP_QOS	"qos"
+
+static void
+parse_queue_param(char *value, void *opaque)
+{
+	struct otx2_sso_qos queue_qos = {0};
+	uint8_t *val = (uint8_t *)&queue_qos;
+	struct otx2_sso_evdev *dev = opaque;
+	char *tok = strtok(value, "-");
+
+	if (!strlen(value))
+		return;
+
+	while (tok != NULL) {
+		*val = atoi(tok);
+		tok = strtok(NULL, "-");
+		val++;
+	}
+
+	if (val != (&queue_qos.iaq_prcnt + 1)) {
+		otx2_err("Invalid QoS parameter expected [Qx-XAQ-TAQ-IAQ]");
+		return;
+	}
+
+	dev->qos_queue_cnt++;
+	dev->qos_parse_data = rte_realloc(dev->qos_parse_data,
+					  sizeof(struct otx2_sso_qos) *
+					  dev->qos_queue_cnt, 0);
+	dev->qos_parse_data[dev->qos_queue_cnt - 1] = queue_qos;
+}
+
+static void
+parse_qos_list(const char *value, void *opaque)
+{
+	char *s = strdup(value);
+	char *start = NULL;
+	char *end = NULL;
+	char *f = s;
+
+	while (*s) {
+		if (*s == '[')
+			start = s;
+		else if (*s == ']')
+			end = s;
+
+		if (start < end && *start) {
+			*end = 0;
+			parse_queue_param(start + 1, opaque);
+			s = end;
+			start = end;
+		}
+		s++;
+	}
+
+	free(f);
+}
+
+static int
+parse_sso_kvargs_dict(const char *key, const char *value, void *opaque)
+{
+	RTE_SET_USED(key);
+
+	/* Dict format [Qx-XAQ-TAQ-IAQ][Qz-XAQ-TAQ-IAQ] use '-' cause ','
+	 * isn't allowed. Everything is expressed in percentages, 0 represents
+	 * default.
+	 */
+	parse_qos_list(value, opaque);
+
+	return 0;
+}
 
 static void
 sso_parse_devargs(struct otx2_sso_evdev *dev, struct rte_devargs *devargs)
@@ -1047,6 +1146,8 @@ sso_parse_devargs(struct otx2_sso_evdev *dev, struct rte_devargs *devargs)
 			   &dev->xae_cnt);
 	rte_kvargs_process(kvlist, OTX2_SSO_SINGLE_WS, &parse_kvargs_flag,
 			   &single_ws);
+	rte_kvargs_process(kvlist, OTX2_SSO_GGRP_QOS, &parse_sso_kvargs_dict,
+			   dev);
 
 	dev->dual_ws = !single_ws;
 	rte_kvargs_free(kvlist);
@@ -1202,4 +1303,5 @@ RTE_PMD_REGISTER_PCI(event_octeontx2, pci_sso);
 RTE_PMD_REGISTER_PCI_TABLE(event_octeontx2, pci_sso_map);
 RTE_PMD_REGISTER_KMOD_DEP(event_octeontx2, "vfio-pci");
 RTE_PMD_REGISTER_PARAM_STRING(event_octeontx2, OTX2_SSO_XAE_CNT "=<int>"
-			      OTX2_SSO_SINGLE_WS "=1");
+			      OTX2_SSO_SINGLE_WS "=1"
+			      OTX2_SSO_GGRP_QOS "=<string>");
diff --git a/drivers/event/octeontx2/otx2_evdev.h b/drivers/event/octeontx2/otx2_evdev.h
index 1a7a1b0d0..6b221f5d4 100644
--- a/drivers/event/octeontx2/otx2_evdev.h
+++ b/drivers/event/octeontx2/otx2_evdev.h
@@ -89,6 +89,13 @@ enum {
 	SSO_SYNC_EMPTY
 };
 
+struct otx2_sso_qos {
+	uint8_t queue;
+	uint8_t xaq_prcnt;
+	uint8_t taq_prcnt;
+	uint8_t iaq_prcnt;
+};
+
 struct otx2_sso_evdev {
 	OTX2_DEV; /* Base class */
 	uint8_t max_event_queues;
@@ -109,6 +116,8 @@ struct otx2_sso_evdev {
 	/* Dev args */
 	uint8_t dual_ws;
 	uint32_t xae_cnt;
+	uint8_t qos_queue_cnt;
+	struct otx2_sso_qos *qos_parse_data;
 	/* HW const */
 	uint32_t xae_waes;
 	uint32_t xaq_buf_size;
-- 
2.21.0


  parent reply	other threads:[~2019-06-01 18:59 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-01 18:53 [dpdk-dev] [PATCH 00/44] OCTEON TX2 event device driver pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 01/44] event/octeontx2: add build infra and device probe pbhagavatula
2019-06-17  7:50   ` Jerin Jacob Kollanukkaran
2019-06-01 18:53 ` [dpdk-dev] [PATCH 02/44] event/octeontx2: add init and fini for octeontx2 SSO object pbhagavatula
2019-06-17  7:52   ` Jerin Jacob Kollanukkaran
2019-06-01 18:53 ` [dpdk-dev] [PATCH 03/44] event/octeontx2: add device capabilities function pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 04/44] event/octeontx2: add device configure function pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 05/44] event/octeontx2: add event queue config functions pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 06/44] event/octeontx2: allocate event inflight buffers pbhagavatula
2019-06-17  7:56   ` Jerin Jacob Kollanukkaran
2019-06-01 18:53 ` [dpdk-dev] [PATCH 07/44] event/octeontx2: add devargs for inflight buffer count pbhagavatula
2019-06-17  7:58   ` Jerin Jacob Kollanukkaran
2019-06-01 18:53 ` [dpdk-dev] [PATCH 08/44] event/octeontx2: add event port config functions pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 09/44] event/octeontx2: support linking queues to ports pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 10/44] event/octeontx2: support dequeue timeout tick conversion pbhagavatula
2019-06-17  8:01   ` Jerin Jacob Kollanukkaran
2019-06-01 18:53 ` [dpdk-dev] [PATCH 11/44] event/octeontx2: add SSO GWS and GGRP IRQ handlers pbhagavatula
2019-06-17  8:04   ` Jerin Jacob Kollanukkaran
2019-06-01 18:53 ` [dpdk-dev] [PATCH 12/44] event/octeontx2: add register dump functions pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 13/44] event/octeontx2: add xstats support pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 14/44] event/octeontx2: add SSO HW device operations pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 15/44] event/octeontx2: add worker enqueue functions pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 16/44] event/octeontx2: add worker dequeue functions pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 17/44] event/octeontx2: add octeontx2 SSO dual workslot mode pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 18/44] event/octeontx2: add SSO dual GWS HW device operations pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 19/44] event/octeontx2: add worker dual GWS enqueue functions pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 20/44] event/octeontx2: add worker dual GWS dequeue functions pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 21/44] event/octeontx2: add devargs to force legacy mode pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 22/44] event/octeontx2: add device start function pbhagavatula
2019-06-01 18:53 ` pbhagavatula [this message]
2019-06-01 18:53 ` [dpdk-dev] [PATCH 24/44] event/octeontx2: add device stop and close functions pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 25/44] event/octeontx2: add SSO selftest pbhagavatula
2019-06-17  8:18   ` Jerin Jacob Kollanukkaran
2019-06-01 18:53 ` [dpdk-dev] [PATCH 26/44] doc: add Marvell OCTEON TX2 event device documentation pbhagavatula
2019-06-17  8:15   ` Jerin Jacob Kollanukkaran
2019-06-01 18:53 ` [dpdk-dev] [PATCH 27/44] event/octeontx2: add event timer support pbhagavatula
2019-06-17  8:20   ` Jerin Jacob Kollanukkaran
2019-06-01 18:53 ` [dpdk-dev] [PATCH 28/44] event/octeontx2: add timer adapter capabilities pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 29/44] event/octeontx2: create and free timer adapter pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 30/44] event/octeontx2: allow TIM to optimize config pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 31/44] event/octeontx2: add devargs to disable NPA pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 32/44] event/octeontx2: add devargs to modify chunk slots pbhagavatula
2019-06-17  8:24   ` Jerin Jacob Kollanukkaran
2019-06-01 18:53 ` [dpdk-dev] [PATCH 33/44] event/octeontx2: add TIM IRQ handlers pbhagavatula
2019-06-17  8:25   ` Jerin Jacob Kollanukkaran
2019-06-01 18:53 ` [dpdk-dev] [PATCH 34/44] event/octeontx2: allow adapters to resize inflight buffers pbhagavatula
2019-06-17  8:27   ` Jerin Jacob Kollanukkaran
2019-06-01 18:53 ` [dpdk-dev] [PATCH 35/44] event/octeontx2: add timer adapter info get function pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 36/44] event/octeontx2: add TIM bucket operations pbhagavatula
2019-06-17  8:31   ` Jerin Jacob Kollanukkaran
2019-06-01 18:53 ` [dpdk-dev] [PATCH 37/44] event/octeontx2: add event timer arm routine pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 38/44] event/octeontx2: add event timer arm timeout burst pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 39/44] event/octeontx2: add event timer cancel function pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 40/44] event/octeontx2: add event timer stats get and reset pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 41/44] event/octeontx2: add even timer adapter start and stop pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 42/44] event/octeontx2: add devargs to limit timer adapters pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 43/44] event/octeontx2: add devargs to control adapter parameters pbhagavatula
2019-06-01 18:53 ` [dpdk-dev] [PATCH 44/44] doc: update Marvell OCTEON TX2 eventdev documentation pbhagavatula

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190601185355.370-24-pbhagavatula@marvell.com \
    --to=pbhagavatula@marvell.com \
    --cc=dev@dpdk.org \
    --cc=jerinj@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).