* [dpdk-dev] Dpdk version 17.11.4 (i40e) switchover is not working
@ 2019-07-04 14:21 chetan bhasin
2019-07-11 13:24 ` chetan bhasin
0 siblings, 1 reply; 3+ messages in thread
From: chetan bhasin @ 2019-07-04 14:21 UTC (permalink / raw)
To: dev
Hello folks,
I am using dpdk 17.11.4 version , it's a bare metal server with intel X722
nic with firm-ware version 4.0.
The problem is switch-over is not working, looks like dpdk is not able to
get link down trigger.
Can anybody guide us please .
Thanks,
Chetan Bhasin
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dpdk-dev] Dpdk version 17.11.4 (i40e) switchover is not working
2019-07-04 14:21 [dpdk-dev] Dpdk version 17.11.4 (i40e) switchover is not working chetan bhasin
@ 2019-07-11 13:24 ` chetan bhasin
2019-07-11 14:00 ` Bruce Richardson
0 siblings, 1 reply; 3+ messages in thread
From: chetan bhasin @ 2019-07-11 13:24 UTC (permalink / raw)
To: dev
Hello Everyone,
I have figured out the DPDK version , i.e 18.11.2 , where LSC is working
fine for i40e (X722) under bond setup.
So command-line I am using is
./testpmd -c f -n 4 --vdev
'net_bonding0,mode=1,slave=0000:009:00.2,slave=0000:009:00.0,primary=0000:009:00.2'
-- -I
Can anybody please provide a direction towards which patch I should look
into , as there are lots of changes between dpdk-17.11.4 and dpdk-18.11.2.
I have tried some patches related to i40e driver but no success yet.
Thanks & Regards,
Chetan Bhasin
On Thu, Jul 4, 2019 at 7:51 PM chetan bhasin <chetan.bhasin017@gmail.com>
wrote:
> Hello folks,
>
> I am using dpdk 17.11.4 version , it's a bare metal server with intel X722
> nic with firm-ware version 4.0.
>
> The problem is switch-over is not working, looks like dpdk is not able to
> get link down trigger.
>
> Can anybody guide us please .
>
> Thanks,
> Chetan Bhasin
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dpdk-dev] Dpdk version 17.11.4 (i40e) switchover is not working
2019-07-11 13:24 ` chetan bhasin
@ 2019-07-11 14:00 ` Bruce Richardson
0 siblings, 0 replies; 3+ messages in thread
From: Bruce Richardson @ 2019-07-11 14:00 UTC (permalink / raw)
To: chetan bhasin; +Cc: dev
On Thu, Jul 11, 2019 at 06:54:31PM +0530, chetan bhasin wrote:
> Hello Everyone,
>
> I have figured out the DPDK version , i.e 18.11.2 , where LSC is working
> fine for i40e (X722) under bond setup.
>
> So command-line I am using is
> ./testpmd -c f -n 4 --vdev
> 'net_bonding0,mode=1,slave=0000:009:00.2,slave=0000:009:00.0,primary=0000:009:00.2'
> -- -I
>
> Can anybody please provide a direction towards which patch I should look
> into , as there are lots of changes between dpdk-17.11.4 and dpdk-18.11.2.
> I have tried some patches related to i40e driver but no success yet.
>
Would "git bisect" not work in this case to isolate the relevant patches?
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-07-11 14:00 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-04 14:21 [dpdk-dev] Dpdk version 17.11.4 (i40e) switchover is not working chetan bhasin
2019-07-11 13:24 ` chetan bhasin
2019-07-11 14:00 ` Bruce Richardson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).