DPDK patches and discussions
 help / color / mirror / Atom feed
From: Nithin Dabilpuram <ndabilpuram@marvell.com>
To: Jerin Jacob <jerinj@marvell.com>,
	Nithin Dabilpuram <ndabilpuram@marvell.com>,
	Vamsi Attunuru <vattunuru@marvell.com>,
	"John McNamara" <john.mcnamara@intel.com>,
	Marko Kovacevic <marko.kovacevic@intel.com>,
	Kiran Kumar K <kirankumark@marvell.com>
Cc: <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v2] common/octeontx2: add CNF95xx SoC support
Date: Fri, 12 Jul 2019 14:55:54 +0530	[thread overview]
Message-ID: <20190712092554.1699-1-ndabilpuram@marvell.com> (raw)
In-Reply-To: <20190710170142.142517-1-ndabilpuram@marvell.com>

Update platform support of CNF95xx in documentation and
also, update the HW cap based on PCI subsystem id and revision id.
This patch also changes HW capability handling to be based on
PCI Revision ID. PCI Revision ID contains a unique identifier
to identify chip, major and minor revisions.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>

---
v2:
- Removed code replication related to pci config read

 doc/guides/platform/octeontx2.rst                  |  1 +
 drivers/common/octeontx2/otx2_common.h             | 20 ++++++++++++
 drivers/common/octeontx2/otx2_dev.c                | 14 +-------
 drivers/common/octeontx2/otx2_dev.h                | 37 +++++++++++++++++++---
 .../octeontx2/rte_common_octeontx2_version.map     |  2 +-
 drivers/net/octeontx2/otx2_ethdev.c                |  4 +--
 drivers/net/octeontx2/otx2_flow_ctrl.c             |  8 ++---
 drivers/net/octeontx2/otx2_tm.c                    |  2 +-
 8 files changed, 63 insertions(+), 25 deletions(-)

diff --git a/doc/guides/platform/octeontx2.rst b/doc/guides/platform/octeontx2.rst
index 7d1fead..bee56ab 100644
--- a/doc/guides/platform/octeontx2.rst
+++ b/doc/guides/platform/octeontx2.rst
@@ -15,6 +15,7 @@ Supported OCTEON TX2 SoCs
 
 - CN96xx
 - CN93xx
+- CNF95xx
 
 OCTEON TX2 Resource Virtualization Unit architecture
 ----------------------------------------------------
diff --git a/drivers/common/octeontx2/otx2_common.h b/drivers/common/octeontx2/otx2_common.h
index cdb25d9..faf206b 100644
--- a/drivers/common/octeontx2/otx2_common.h
+++ b/drivers/common/octeontx2/otx2_common.h
@@ -108,6 +108,26 @@ extern int otx2_logtype_dpi;
 #define PCI_DEVID_OCTEONTX2_RVU_AF_VF		0xA0f8
 #define PCI_DEVID_OCTEONTX2_DPI_VF		0xA081
 
+/* Subsystem Device ID */
+#define PCI_SUBSYS_DEVID_96XX_95XX		0xB200
+
+/*
+ * REVID for RVU PCIe devices.
+ * Bits 0..1: minor pass
+ * Bits 3..2: major pass
+ * Bits 7..4: midr id, 0:96, 1:95, 2:loki, f:unknown
+ */
+
+#define RVU_PCI_REV_MIDR_ID(rev_id)		(rev_id >> 4)
+#define RVU_PCI_REV_MAJOR(rev_id)		((rev_id >> 2) & 0x3)
+#define RVU_PCI_REV_MINOR(rev_id)		(rev_id & 0x3)
+
+#define RVU_PCI_CN96XX_MIDR_ID			0x0
+#define RVU_PCI_CNF95XX_MIDR_ID			0x1
+
+/* PCI Config offsets */
+#define RVU_PCI_REVISION_ID			0x08
+
 /* IO Access */
 #define otx2_read64(addr) rte_read64_relaxed((void *)(addr))
 #define otx2_write64(val, addr) rte_write64_relaxed((val), (void *)(addr))
diff --git a/drivers/common/octeontx2/otx2_dev.c b/drivers/common/octeontx2/otx2_dev.c
index 3b51fa9..f58a6e7 100644
--- a/drivers/common/octeontx2/otx2_dev.c
+++ b/drivers/common/octeontx2/otx2_dev.c
@@ -876,19 +876,8 @@ otx2_dev_active_vfs(void *otx2_dev)
 }
 
 static void
-otx2_update_pass_hwcap(struct rte_pci_device *pci_dev, struct otx2_dev *dev)
-{
-	RTE_SET_USED(pci_dev);
-
-	/* Update this logic when we have A1 */
-	dev->hwcap |= OTX2_HWCAP_F_A0;
-}
-
-static void
 otx2_update_vf_hwcap(struct rte_pci_device *pci_dev, struct otx2_dev *dev)
 {
-	dev->hwcap = 0;
-
 	switch (pci_dev->id.device_id) {
 	case PCI_DEVID_OCTEONTX2_RVU_PF:
 		break;
@@ -907,7 +896,7 @@ otx2_update_vf_hwcap(struct rte_pci_device *pci_dev, struct otx2_dev *dev)
  * Initialize the otx2 device
  */
 int
-otx2_dev_init(struct rte_pci_device *pci_dev, void *otx2_dev)
+otx2_dev_priv_init(struct rte_pci_device *pci_dev, void *otx2_dev)
 {
 	int up_direction = MBOX_DIR_PFAF_UP;
 	int rc, direction = MBOX_DIR_PFAF;
@@ -931,7 +920,6 @@ otx2_dev_init(struct rte_pci_device *pci_dev, void *otx2_dev)
 	dev->bar4 = bar4;
 
 	otx2_update_vf_hwcap(pci_dev, dev);
-	otx2_update_pass_hwcap(pci_dev, dev);
 
 	if (otx2_dev_is_vf(dev)) {
 		direction = MBOX_DIR_VFPF;
diff --git a/drivers/common/octeontx2/otx2_dev.h b/drivers/common/octeontx2/otx2_dev.h
index be862ad..53a3669 100644
--- a/drivers/common/octeontx2/otx2_dev.h
+++ b/drivers/common/octeontx2/otx2_dev.h
@@ -13,14 +13,18 @@
 #include "otx2_mempool.h"
 
 /* Common HWCAP flags. Use from LSB bits */
-#define OTX2_HWCAP_F_VF		BIT_ULL(0) /* VF device */
+#define OTX2_HWCAP_F_VF		BIT_ULL(8) /* VF device */
 #define otx2_dev_is_vf(dev)	(dev->hwcap & OTX2_HWCAP_F_VF)
 #define otx2_dev_is_pf(dev)	(!(dev->hwcap & OTX2_HWCAP_F_VF))
 #define otx2_dev_is_lbk(dev)	((dev->hwcap & OTX2_HWCAP_F_VF) && \
 				 (dev->tx_chan_base < 0x700))
+#define otx2_dev_revid(dev)	(dev->hwcap & 0xFF)
 
-#define OTX2_HWCAP_F_A0		BIT_ULL(1) /* A0 device */
-#define otx2_dev_is_A0(dev)	(dev->hwcap & OTX2_HWCAP_F_A0)
+#define otx2_dev_is_A0(dev)					\
+	((RVU_PCI_REV_MAJOR(otx2_dev_revid(dev)) == 0x0) &&	\
+	 (RVU_PCI_REV_MINOR(otx2_dev_revid(dev)) == 0x0))
+#define otx2_dev_is_Ax(dev)					\
+	((RVU_PCI_REV_MAJOR(otx2_dev_revid(dev)) == 0x0))
 
 struct otx2_dev;
 
@@ -61,7 +65,32 @@ struct otx2_dev {
 	OTX2_DEV;
 };
 
-int otx2_dev_init(struct rte_pci_device *pci_dev, void *otx2_dev);
+int otx2_dev_priv_init(struct rte_pci_device *pci_dev, void *otx2_dev);
+
+/* Common dev init and fini routines */
+
+static __rte_always_inline int
+otx2_dev_init(struct rte_pci_device *pci_dev, void *otx2_dev)
+{
+	struct otx2_dev *dev = otx2_dev;
+	uint8_t rev_id;
+	int rc;
+
+	rc = rte_pci_read_config(pci_dev, &rev_id,
+				 1, RVU_PCI_REVISION_ID);
+	if (rc != 1) {
+		otx2_err("Failed to read pci revision id, rc=%d", rc);
+		return rc;
+	}
+
+	if (pci_dev->id.subsystem_device_id == PCI_SUBSYS_DEVID_96XX_95XX)
+		dev->hwcap = rev_id;
+	else
+		dev->hwcap = 0;
+
+	return otx2_dev_priv_init(pci_dev, otx2_dev);
+}
+
 void otx2_dev_fini(struct rte_pci_device *pci_dev, void *otx2_dev);
 int otx2_dev_active_vfs(void *otx2_dev);
 
diff --git a/drivers/common/octeontx2/rte_common_octeontx2_version.map b/drivers/common/octeontx2/rte_common_octeontx2_version.map
index 2f48263..4400120 100644
--- a/drivers/common/octeontx2/rte_common_octeontx2_version.map
+++ b/drivers/common/octeontx2/rte_common_octeontx2_version.map
@@ -3,7 +3,7 @@ DPDK_19.08 {
 
 	otx2_dev_active_vfs;
 	otx2_dev_fini;
-	otx2_dev_init;
+	otx2_dev_priv_init;
 
 	otx2_logtype_base;
 	otx2_logtype_dpi;
diff --git a/drivers/net/octeontx2/otx2_ethdev.c b/drivers/net/octeontx2/otx2_ethdev.c
index 156e7d3..fcb1869 100644
--- a/drivers/net/octeontx2/otx2_ethdev.c
+++ b/drivers/net/octeontx2/otx2_ethdev.c
@@ -1235,7 +1235,7 @@ otx2_nix_configure(struct rte_eth_dev *eth_dev)
 		nix_lf_free(dev);
 	}
 
-	if (otx2_dev_is_A0(dev) &&
+	if (otx2_dev_is_Ax(dev) &&
 	    (txmode->offloads & DEV_TX_OFFLOAD_SCTP_CKSUM) &&
 	    ((txmode->offloads & DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM) ||
 	    (txmode->offloads & DEV_TX_OFFLOAD_OUTER_UDP_CKSUM))) {
@@ -1787,7 +1787,7 @@ otx2_eth_dev_init(struct rte_eth_dev *eth_dev)
 	dev->tx_offload_capa = nix_get_tx_offload_capa(dev);
 	dev->rx_offload_capa = nix_get_rx_offload_capa(dev);
 
-	if (otx2_dev_is_A0(dev)) {
+	if (otx2_dev_is_Ax(dev)) {
 		dev->hwcap |= OTX2_FIXUP_F_MIN_4K_Q;
 		dev->hwcap |= OTX2_FIXUP_F_LIMIT_CQ_FULL;
 	}
diff --git a/drivers/net/octeontx2/otx2_flow_ctrl.c b/drivers/net/octeontx2/otx2_flow_ctrl.c
index 0392086..ae56352 100644
--- a/drivers/net/octeontx2/otx2_flow_ctrl.c
+++ b/drivers/net/octeontx2/otx2_flow_ctrl.c
@@ -162,8 +162,8 @@ otx2_nix_flow_ctrl_set(struct rte_eth_dev *eth_dev,
 
 	/* Check if TX pause frame is already enabled or not */
 	if (fc->tx_pause ^ tx_pause) {
-		if (otx2_dev_is_A0(dev) && eth_dev->data->dev_started) {
-			/* on A0, CQ should be in disabled state
+		if (otx2_dev_is_Ax(dev) && eth_dev->data->dev_started) {
+			/* on Ax, CQ should be in disabled state
 			 * while setting flow control configuration.
 			 */
 			otx2_info("Stop the port=%d for setting flow control\n",
@@ -207,8 +207,8 @@ otx2_nix_update_flow_ctrl_mode(struct rte_eth_dev *eth_dev)
 	 */
 	otx2_nix_flow_ctrl_get(eth_dev, &fc_conf);
 
-	/* To avoid Link credit deadlock on A0, disable Tx FC if it's enabled */
-	if (otx2_dev_is_A0(dev) &&
+	/* To avoid Link credit deadlock on Ax, disable Tx FC if it's enabled */
+	if (otx2_dev_is_Ax(dev) &&
 	    (fc_conf.mode == RTE_FC_FULL || fc_conf.mode == RTE_FC_RX_PAUSE)) {
 		fc_conf.mode =
 				(fc_conf.mode == RTE_FC_FULL ||
diff --git a/drivers/net/octeontx2/otx2_tm.c b/drivers/net/octeontx2/otx2_tm.c
index 2469206..12903ec 100644
--- a/drivers/net/octeontx2/otx2_tm.c
+++ b/drivers/net/octeontx2/otx2_tm.c
@@ -59,7 +59,7 @@ static bool
 nix_tm_have_tl1_access(struct otx2_eth_dev *dev)
 {
 	bool is_lbk = otx2_dev_is_lbk(dev);
-	return otx2_dev_is_pf(dev) && !otx2_dev_is_A0(dev) &&
+	return otx2_dev_is_pf(dev) && !otx2_dev_is_Ax(dev) &&
 		!is_lbk && !dev->maxvf;
 }
 
-- 
2.8.4


  parent reply	other threads:[~2019-07-12  9:30 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-10 17:01 [dpdk-dev] [PATCH] " Nithin Dabilpuram
2019-07-11 11:56 ` Jerin Jacob Kollanukkaran
2019-07-12  9:25 ` Nithin Dabilpuram [this message]
2019-07-12 12:37   ` [dpdk-dev] [PATCH v2] " Jerin Jacob Kollanukkaran
2019-07-14 13:44     ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190712092554.1699-1-ndabilpuram@marvell.com \
    --to=ndabilpuram@marvell.com \
    --cc=dev@dpdk.org \
    --cc=jerinj@marvell.com \
    --cc=john.mcnamara@intel.com \
    --cc=kirankumark@marvell.com \
    --cc=marko.kovacevic@intel.com \
    --cc=vattunuru@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).