DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [RFC] net/ena: use dynamic log type for debug logging
@ 2019-07-16 20:43 Stephen Hemminger
  2019-08-27 12:51 ` Michał Krawczyk
  0 siblings, 1 reply; 3+ messages in thread
From: Stephen Hemminger @ 2019-07-16 20:43 UTC (permalink / raw)
  To: mw, mk, gtzalik, evgenys; +Cc: dev

The generic RTE_LOGTYPE_PMD is a historical relic and should
not be used. Every driver must use dynamic logtypes.

Compile tested only!

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 drivers/net/ena/base/ena_plat_dpdk.h |  20 ++--
 drivers/net/ena/ena_ethdev.c         | 167 ++++++++++++++++-----------
 drivers/net/ena/ena_logs.h           |  18 ++-
 3 files changed, 125 insertions(+), 80 deletions(-)

diff --git a/drivers/net/ena/base/ena_plat_dpdk.h b/drivers/net/ena/base/ena_plat_dpdk.h
index 902d91efbe38..0909bfc4835d 100644
--- a/drivers/net/ena/base/ena_plat_dpdk.h
+++ b/drivers/net/ena/base/ena_plat_dpdk.h
@@ -98,11 +98,13 @@ typedef uint64_t dma_addr_t;
 #define ENA_GET_SYSTEM_USECS()						\
 	(rte_get_timer_cycles() * US_PER_S / rte_get_timer_hz())
 
+extern int ena_logtype_com;
 #if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
 #define ENA_ASSERT(cond, format, arg...)				\
 	do {								\
 		if (unlikely(!(cond))) {				\
-			RTE_LOG(ERR, PMD, format, ##arg);		\
+			rte_log(RTE_LOGTYPE_ERR, ena_logtype_com,	\
+				format, ##arg);				\
 			rte_panic("line %d\tassert \"" #cond "\""	\
 					"failed\n", __LINE__);		\
 		}							\
@@ -127,14 +129,14 @@ typedef uint64_t dma_addr_t;
 			  (~0ULL >> (BITS_PER_LONG_LONG - 1 - (h))))
 
 #ifdef RTE_LIBRTE_ENA_COM_DEBUG
-#define ena_trc_dbg(format, arg...)					\
-	RTE_LOG(DEBUG, PMD, "[ENA_COM: %s] " format, __func__, ##arg)
-#define ena_trc_info(format, arg...)					\
-	RTE_LOG(INFO, PMD, "[ENA_COM: %s] " format, __func__, ##arg)
-#define ena_trc_warn(format, arg...)					\
-	RTE_LOG(ERR, PMD, "[ENA_COM: %s] " format, __func__, ##arg)
-#define ena_trc_err(format, arg...)					\
-	RTE_LOG(ERR, PMD, "[ENA_COM: %s] " format, __func__, ##arg)
+#define ena_trc_log(level, fmt, arg...) \
+	rte_log(RTE_LOG_ ## level, ena_logtype_com, \
+		"[ENA_COM: %s]" fmt, __func__, ##arg)
+
+#define ena_trc_dbg(format, arg...)	ena_trc_log(DEBUG, format, ##arg)
+#define ena_trc_info(format, arg...)	ena_trc_log(INFO, format, ##arg)
+#define ena_trc_warn(format, arg...)	ena_trc_log(WARNING, format, ##arg)
+#define ena_trc_err(format, arg...)	ena_trc_log(ERR, format, ##arg)
 #else
 #define ena_trc_dbg(format, arg...) do { } while (0)
 #define ena_trc_info(format, arg...) do { } while (0)
diff --git a/drivers/net/ena/ena_ethdev.c b/drivers/net/ena/ena_ethdev.c
index f5833408044c..4a67298e9d1f 100644
--- a/drivers/net/ena/ena_ethdev.c
+++ b/drivers/net/ena/ena_ethdev.c
@@ -178,6 +178,19 @@ static const struct ena_stats ena_stats_rx_strings[] = {
 int ena_logtype_init;
 int ena_logtype_driver;
 
+#ifdef RTE_LIBRTE_ENA_DEBUG_RX
+int ena_logtype_rx;
+#endif
+#ifdef RTE_LIBRTE_ENA_DEBUG_TX
+int ena_logtype_tx;
+#endif
+#ifdef RTE_LIBRTE_ENA_DEBUG_TX_FREE
+int ena_logtype_tx_free;
+#endif
+#ifdef RTE_LIBRTE_ENA_COM_DEBUG
+int ena_logtype_com;
+#endif
+
 static const struct rte_pci_id pci_id_ena_map[] = {
 	{ RTE_PCI_DEVICE(PCI_VENDOR_ID_AMAZON, PCI_DEVICE_ID_ENA_VF) },
 	{ RTE_PCI_DEVICE(PCI_VENDOR_ID_AMAZON, PCI_DEVICE_ID_ENA_LLQ_VF) },
@@ -358,7 +371,7 @@ static inline int validate_rx_req_id(struct ena_ring *rx_ring, uint16_t req_id)
 	if (likely(req_id < rx_ring->ring_size))
 		return 0;
 
-	RTE_LOG(ERR, PMD, "Invalid rx req_id: %hu\n", req_id);
+	PMD_DRV_LOG(ERR, "Invalid rx req_id: %hu\n", req_id);
 
 	rx_ring->adapter->reset_reason = ENA_REGS_RESET_INV_RX_REQ_ID;
 	rx_ring->adapter->trigger_reset = true;
@@ -378,9 +391,9 @@ static int validate_tx_req_id(struct ena_ring *tx_ring, u16 req_id)
 	}
 
 	if (tx_info)
-		RTE_LOG(ERR, PMD, "tx_info doesn't have valid mbuf\n");
+		PMD_DRV_LOG(ERR, "tx_info doesn't have valid mbuf\n");
 	else
-		RTE_LOG(ERR, PMD, "Invalid req_id: %hu\n", req_id);
+		PMD_DRV_LOG(ERR, "Invalid req_id: %hu\n", req_id);
 
 	/* Trigger device reset */
 	++tx_ring->tx_stats.bad_req_id;
@@ -397,7 +410,7 @@ static void ena_config_host_info(struct ena_com_dev *ena_dev)
 	/* Allocate only the host info */
 	rc = ena_com_allocate_host_info(ena_dev);
 	if (rc) {
-		RTE_LOG(ERR, PMD, "Cannot allocate host info\n");
+		PMD_DRV_LOG(ERR, "Cannot allocate host info\n");
 		return;
 	}
 
@@ -420,9 +433,9 @@ static void ena_config_host_info(struct ena_com_dev *ena_dev)
 	rc = ena_com_set_host_attributes(ena_dev);
 	if (rc) {
 		if (rc == -ENA_COM_UNSUPPORTED)
-			RTE_LOG(WARNING, PMD, "Cannot set host attributes\n");
+			PMD_DRV_LOG(WARNING, "Cannot set host attributes\n");
 		else
-			RTE_LOG(ERR, PMD, "Cannot set host attributes\n");
+			PMD_DRV_LOG(ERR, "Cannot set host attributes\n");
 
 		goto err;
 	}
@@ -453,16 +466,16 @@ static void ena_config_debug_area(struct ena_adapter *adapter)
 
 	rc = ena_com_allocate_debug_area(&adapter->ena_dev, debug_area_size);
 	if (rc) {
-		RTE_LOG(ERR, PMD, "Cannot allocate debug area\n");
+		PMD_DRV_LOG(ERR, "Cannot allocate debug area\n");
 		return;
 	}
 
 	rc = ena_com_set_host_attributes(&adapter->ena_dev);
 	if (rc) {
 		if (rc == -ENA_COM_UNSUPPORTED)
-			RTE_LOG(WARNING, PMD, "Cannot set host attributes\n");
+			PMD_DRV_LOG(WARNING, "Cannot set host attributes\n");
 		else
-			RTE_LOG(ERR, PMD, "Cannot set host attributes\n");
+			PMD_DRV_LOG(ERR, "Cannot set host attributes\n");
 
 		goto err;
 	}
@@ -528,7 +541,7 @@ static int ena_rss_reta_update(struct rte_eth_dev *dev,
 		return -EINVAL;
 
 	if (reta_size > ENA_RX_RSS_TABLE_SIZE) {
-		RTE_LOG(WARNING, PMD,
+		PMD_DRV_LOG(WARNING,
 			"indirection table %d is bigger than supported (%d)\n",
 			reta_size, ENA_RX_RSS_TABLE_SIZE);
 		return -EINVAL;
@@ -548,7 +561,7 @@ static int ena_rss_reta_update(struct rte_eth_dev *dev,
 							       i,
 							       entry_value);
 			if (unlikely(rc && rc != ENA_COM_UNSUPPORTED)) {
-				RTE_LOG(ERR, PMD,
+				PMD_DRV_LOG(ERR,
 					"Cannot fill indirect table\n");
 				return rc;
 			}
@@ -557,11 +570,11 @@ static int ena_rss_reta_update(struct rte_eth_dev *dev,
 
 	rc = ena_com_indirect_table_set(ena_dev);
 	if (unlikely(rc && rc != ENA_COM_UNSUPPORTED)) {
-		RTE_LOG(ERR, PMD, "Cannot flush the indirect table\n");
+		PMD_DRV_LOG(ERR, "Cannot flush the indirect table\n");
 		return rc;
 	}
 
-	RTE_LOG(DEBUG, PMD, "%s(): RSS configured %d entries  for port %d\n",
+	PMD_DRV_LOG(DEBUG, "%s(): RSS configured %d entries  for port %d\n",
 		__func__, reta_size, adapter->rte_dev->data->port_id);
 
 	return 0;
@@ -586,7 +599,7 @@ static int ena_rss_reta_query(struct rte_eth_dev *dev,
 
 	rc = ena_com_indirect_table_get(ena_dev, indirect_table);
 	if (unlikely(rc && rc != ENA_COM_UNSUPPORTED)) {
-		RTE_LOG(ERR, PMD, "cannot get indirect table\n");
+		PMD_DRV_LOG(ERR, "cannot get indirect table\n");
 		return -ENOTSUP;
 	}
 
@@ -610,7 +623,7 @@ static int ena_rss_init_default(struct ena_adapter *adapter)
 
 	rc = ena_com_rss_init(ena_dev, ENA_RX_RSS_TABLE_LOG_SIZE);
 	if (unlikely(rc)) {
-		RTE_LOG(ERR, PMD, "Cannot init indirect table\n");
+		PMD_DRV_LOG(ERR, "Cannot init indirect table\n");
 		goto err_rss_init;
 	}
 
@@ -619,7 +632,7 @@ static int ena_rss_init_default(struct ena_adapter *adapter)
 		rc = ena_com_indirect_table_fill_entry(ena_dev, i,
 						       ENA_IO_RXQ_IDX(val));
 		if (unlikely(rc && (rc != ENA_COM_UNSUPPORTED))) {
-			RTE_LOG(ERR, PMD, "Cannot fill indirect table\n");
+			PMD_DRV_LOG(ERR, "Cannot fill indirect table\n");
 			goto err_fill_indir;
 		}
 	}
@@ -627,22 +640,22 @@ static int ena_rss_init_default(struct ena_adapter *adapter)
 	rc = ena_com_fill_hash_function(ena_dev, ENA_ADMIN_CRC32, NULL,
 					ENA_HASH_KEY_SIZE, 0xFFFFFFFF);
 	if (unlikely(rc && (rc != ENA_COM_UNSUPPORTED))) {
-		RTE_LOG(INFO, PMD, "Cannot fill hash function\n");
+		PMD_DRV_LOG(INFO, "Cannot fill hash function\n");
 		goto err_fill_indir;
 	}
 
 	rc = ena_com_set_default_hash_ctrl(ena_dev);
 	if (unlikely(rc && (rc != ENA_COM_UNSUPPORTED))) {
-		RTE_LOG(INFO, PMD, "Cannot fill hash control\n");
+		PMD_DRV_LOG(INFO, "Cannot fill hash control\n");
 		goto err_fill_indir;
 	}
 
 	rc = ena_com_indirect_table_set(ena_dev);
 	if (unlikely(rc && (rc != ENA_COM_UNSUPPORTED))) {
-		RTE_LOG(ERR, PMD, "Cannot flush the indirect table\n");
+		PMD_DRV_LOG(ERR, "Cannot flush the indirect table\n");
 		goto err_fill_indir;
 	}
-	RTE_LOG(DEBUG, PMD, "RSS configured for port %d\n",
+	PMD_DRV_LOG(DEBUG, "RSS configured for port %d\n",
 		adapter->rte_dev->data->port_id);
 
 	return 0;
@@ -693,7 +706,7 @@ static void ena_rx_queue_release(void *queue)
 
 	ring->configured = 0;
 
-	RTE_LOG(NOTICE, PMD, "RX Queue %d:%d released\n",
+	PMD_DRV_LOG(NOTICE, "RX Queue %d:%d released\n",
 		ring->port_id, ring->id);
 }
 
@@ -717,7 +730,7 @@ static void ena_tx_queue_release(void *queue)
 
 	ring->configured = 0;
 
-	RTE_LOG(NOTICE, PMD, "TX Queue %d:%d released\n",
+	PMD_DRV_LOG(NOTICE, "TX Queue %d:%d released\n",
 		ring->port_id, ring->id);
 }
 
@@ -929,7 +942,7 @@ static int ena_stats_get(struct rte_eth_dev *dev,
 	memset(&ena_stats, 0, sizeof(ena_stats));
 	rc = ena_com_get_dev_basic_stats(ena_dev, &ena_stats);
 	if (unlikely(rc)) {
-		RTE_LOG(ERR, PMD, "Could not retrieve statistics from ENA\n");
+		PMD_DRV_LOG(ERR, "Could not retrieve statistics from ENA\n");
 		return rc;
 	}
 
@@ -986,7 +999,7 @@ static int ena_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 	ena_assert_msg(ena_dev != NULL, "Uninitialized device\n");
 
 	if (mtu > ena_get_mtu_conf(adapter) || mtu < ENA_MIN_MTU) {
-		RTE_LOG(ERR, PMD,
+		PMD_DRV_LOG(ERR,
 			"Invalid MTU setting. new_mtu: %d "
 			"max mtu: %d min mtu: %d\n",
 			mtu, ena_get_mtu_conf(adapter), ENA_MIN_MTU);
@@ -995,9 +1008,9 @@ static int ena_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
 
 	rc = ena_com_set_dev_mtu(ena_dev, mtu);
 	if (rc)
-		RTE_LOG(ERR, PMD, "Could not set MTU: %d\n", mtu);
+		PMD_DRV_LOG(ERR, "Could not set MTU: %d\n", mtu);
 	else
-		RTE_LOG(NOTICE, PMD, "Set MTU: %d\n", mtu);
+		PMD_DRV_LOG(NOTICE, "Set MTU: %d\n", mtu);
 
 	return rc;
 }
@@ -1061,7 +1074,7 @@ static void ena_stop(struct rte_eth_dev *dev)
 	if (adapter->trigger_reset) {
 		rc = ena_com_dev_reset(ena_dev, adapter->reset_reason);
 		if (rc)
-			RTE_LOG(ERR, PMD, "Device reset failed rc=%d\n", rc);
+			PMD_DRV_LOG(ERR, "Device reset failed rc=%d\n", rc);
 	}
 
 	++adapter->dev_stats.dev_stop;
@@ -1103,7 +1116,7 @@ static int ena_create_io_queue(struct ena_ring *ring)
 
 	rc = ena_com_create_io_queue(ena_dev, &ctx);
 	if (rc) {
-		RTE_LOG(ERR, PMD,
+		PMD_DRV_LOG(ERR,
 			"failed to create io queue #%d (qid:%d) rc: %d\n",
 			ring->id, ena_qid, rc);
 		return rc;
@@ -1113,7 +1126,7 @@ static int ena_create_io_queue(struct ena_ring *ring)
 				     &ring->ena_com_io_sq,
 				     &ring->ena_com_io_cq);
 	if (rc) {
-		RTE_LOG(ERR, PMD,
+		PMD_DRV_LOG(ERR,
 			"Failed to get io queue handlers. queue num %d rc: %d\n",
 			ring->id, rc);
 		ena_com_destroy_io_queue(ena_dev, ena_qid);
@@ -1206,21 +1219,21 @@ static int ena_tx_queue_setup(struct rte_eth_dev *dev,
 	txq = &adapter->tx_ring[queue_idx];
 
 	if (txq->configured) {
-		RTE_LOG(CRIT, PMD,
+		PMD_DRV_LOG(CRIT,
 			"API violation. Queue %d is already configured\n",
 			queue_idx);
 		return ENA_COM_FAULT;
 	}
 
 	if (!rte_is_power_of_2(nb_desc)) {
-		RTE_LOG(ERR, PMD,
+		PMD_DRV_LOG(ERR,
 			"Unsupported size of TX queue: %d is not a power of 2.\n",
 			nb_desc);
 		return -EINVAL;
 	}
 
 	if (nb_desc > adapter->tx_ring_size) {
-		RTE_LOG(ERR, PMD,
+		PMD_DRV_LOG(ERR,
 			"Unsupported size of TX queue (max size: %d)\n",
 			adapter->tx_ring_size);
 		return -EINVAL;
@@ -1240,7 +1253,7 @@ static int ena_tx_queue_setup(struct rte_eth_dev *dev,
 					  txq->ring_size,
 					  RTE_CACHE_LINE_SIZE);
 	if (!txq->tx_buffer_info) {
-		RTE_LOG(ERR, PMD, "failed to alloc mem for tx buffer info\n");
+		PMD_DRV_LOG(ERR, "failed to alloc mem for tx buffer info\n");
 		return -ENOMEM;
 	}
 
@@ -1248,7 +1261,7 @@ static int ena_tx_queue_setup(struct rte_eth_dev *dev,
 					 sizeof(u16) * txq->ring_size,
 					 RTE_CACHE_LINE_SIZE);
 	if (!txq->empty_tx_reqs) {
-		RTE_LOG(ERR, PMD, "failed to alloc mem for tx reqs\n");
+		PMD_DRV_LOG(ERR, "failed to alloc mem for tx reqs\n");
 		rte_free(txq->tx_buffer_info);
 		return -ENOMEM;
 	}
@@ -1258,7 +1271,7 @@ static int ena_tx_queue_setup(struct rte_eth_dev *dev,
 			    txq->tx_max_header_size,
 			    RTE_CACHE_LINE_SIZE);
 	if (!txq->push_buf_intermediate_buf) {
-		RTE_LOG(ERR, PMD, "failed to alloc push buff for LLQ\n");
+		PMD_DRV_LOG(ERR, "failed to alloc push buff for LLQ\n");
 		rte_free(txq->tx_buffer_info);
 		rte_free(txq->empty_tx_reqs);
 		return -ENOMEM;
@@ -1291,7 +1304,7 @@ static int ena_rx_queue_setup(struct rte_eth_dev *dev,
 
 	rxq = &adapter->rx_ring[queue_idx];
 	if (rxq->configured) {
-		RTE_LOG(CRIT, PMD,
+		PMD_DRV_LOG(CRIT,
 			"API violation. Queue %d is already configured\n",
 			queue_idx);
 		return ENA_COM_FAULT;
@@ -1301,14 +1314,14 @@ static int ena_rx_queue_setup(struct rte_eth_dev *dev,
 		nb_desc = adapter->rx_ring_size;
 
 	if (!rte_is_power_of_2(nb_desc)) {
-		RTE_LOG(ERR, PMD,
+		PMD_DRV_LOG(ERR,
 			"Unsupported size of RX queue: %d is not a power of 2.\n",
 			nb_desc);
 		return -EINVAL;
 	}
 
 	if (nb_desc > adapter->rx_ring_size) {
-		RTE_LOG(ERR, PMD,
+		PMD_DRV_LOG(ERR,
 			"Unsupported size of RX queue (max size: %d)\n",
 			adapter->rx_ring_size);
 		return -EINVAL;
@@ -1325,7 +1338,7 @@ static int ena_rx_queue_setup(struct rte_eth_dev *dev,
 					  sizeof(struct rte_mbuf *) * nb_desc,
 					  RTE_CACHE_LINE_SIZE);
 	if (!rxq->rx_buffer_info) {
-		RTE_LOG(ERR, PMD, "failed to alloc mem for rx buffer info\n");
+		PMD_DRV_LOG(ERR, "failed to alloc mem for rx buffer info\n");
 		return -ENOMEM;
 	}
 
@@ -1334,7 +1347,7 @@ static int ena_rx_queue_setup(struct rte_eth_dev *dev,
 					    RTE_CACHE_LINE_SIZE);
 
 	if (!rxq->rx_refill_buffer) {
-		RTE_LOG(ERR, PMD, "failed to alloc mem for rx refill buffer\n");
+		PMD_DRV_LOG(ERR, "failed to alloc mem for rx refill buffer\n");
 		rte_free(rxq->rx_buffer_info);
 		rxq->rx_buffer_info = NULL;
 		return -ENOMEM;
@@ -1344,7 +1357,7 @@ static int ena_rx_queue_setup(struct rte_eth_dev *dev,
 					 sizeof(uint16_t) * nb_desc,
 					 RTE_CACHE_LINE_SIZE);
 	if (!rxq->empty_rx_reqs) {
-		RTE_LOG(ERR, PMD, "failed to alloc mem for empty rx reqs\n");
+		PMD_DRV_LOG(ERR, "failed to alloc mem for empty rx reqs\n");
 		rte_free(rxq->rx_buffer_info);
 		rxq->rx_buffer_info = NULL;
 		rte_free(rxq->rx_refill_buffer);
@@ -1408,7 +1421,7 @@ static int ena_populate_rx_queue(struct ena_ring *rxq, unsigned int count)
 		rc = ena_com_add_single_rx_desc(rxq->ena_com_io_sq,
 						&ebuf, req_id);
 		if (unlikely(rc)) {
-			RTE_LOG(WARNING, PMD, "failed adding rx desc\n");
+			PMD_DRV_LOG(WARNING, "failed adding rx desc\n");
 			rxq->rx_buffer_info[req_id] = NULL;
 			break;
 		}
@@ -1416,7 +1429,7 @@ static int ena_populate_rx_queue(struct ena_ring *rxq, unsigned int count)
 	}
 
 	if (unlikely(i < count)) {
-		RTE_LOG(WARNING, PMD, "refilled rx qid %d with only %d "
+		PMD_DRV_LOG(WARNING, "refilled rx qid %d with only %d "
 			"buffers (from %d)\n", rxq->id, i, count);
 		rte_mempool_put_bulk(rxq->mb_pool, (void **)(&mbufs[i]),
 				     count - i);
@@ -1450,7 +1463,7 @@ static int ena_device_init(struct ena_com_dev *ena_dev,
 	/* Initialize mmio registers */
 	rc = ena_com_mmio_reg_read_request_init(ena_dev);
 	if (rc) {
-		RTE_LOG(ERR, PMD, "failed to init mmio read less\n");
+		PMD_DRV_LOG(ERR, "failed to init mmio read less\n");
 		return rc;
 	}
 
@@ -1465,14 +1478,14 @@ static int ena_device_init(struct ena_com_dev *ena_dev,
 	/* reset device */
 	rc = ena_com_dev_reset(ena_dev, ENA_REGS_RESET_NORMAL);
 	if (rc) {
-		RTE_LOG(ERR, PMD, "cannot reset device\n");
+		PMD_DRV_LOG(ERR, "cannot reset device\n");
 		goto err_mmio_read_less;
 	}
 
 	/* check FW version */
 	rc = ena_com_validate_version(ena_dev);
 	if (rc) {
-		RTE_LOG(ERR, PMD, "device version is too low\n");
+		PMD_DRV_LOG(ERR, "device version is too low\n");
 		goto err_mmio_read_less;
 	}
 
@@ -1481,7 +1494,7 @@ static int ena_device_init(struct ena_com_dev *ena_dev,
 	/* ENA device administration layer init */
 	rc = ena_com_admin_init(ena_dev, &aenq_handlers);
 	if (rc) {
-		RTE_LOG(ERR, PMD,
+		PMD_DRV_LOG(ERR,
 			"cannot initialize ena admin queue with device\n");
 		goto err_mmio_read_less;
 	}
@@ -1497,7 +1510,7 @@ static int ena_device_init(struct ena_com_dev *ena_dev,
 	/* Get Device Attributes and features */
 	rc = ena_com_get_dev_attr_feat(ena_dev, get_feat_ctx);
 	if (rc) {
-		RTE_LOG(ERR, PMD,
+		PMD_DRV_LOG(ERR,
 			"cannot get attribute for ena device rc= %d\n", rc);
 		goto err_admin_init;
 	}
@@ -1511,7 +1524,7 @@ static int ena_device_init(struct ena_com_dev *ena_dev,
 	aenq_groups &= get_feat_ctx->aenq.supported_groups;
 	rc = ena_com_set_aenq_config(ena_dev, aenq_groups);
 	if (rc) {
-		RTE_LOG(ERR, PMD, "Cannot configure aenq groups rc: %d\n", rc);
+		PMD_DRV_LOG(ERR, "Cannot configure aenq groups rc: %d\n", rc);
 		goto err_admin_init;
 	}
 
@@ -1548,7 +1561,7 @@ static void check_for_missing_keep_alive(struct ena_adapter *adapter)
 
 	if (unlikely((rte_get_timer_cycles() - adapter->timestamp_wd) >=
 	    adapter->keep_alive_timeout)) {
-		RTE_LOG(ERR, PMD, "Keep alive timeout\n");
+		PMD_DRV_LOG(ERR, "Keep alive timeout\n");
 		adapter->reset_reason = ENA_REGS_RESET_KEEP_ALIVE_TO;
 		adapter->trigger_reset = true;
 		++adapter->dev_stats.wd_expired;
@@ -1559,7 +1572,7 @@ static void check_for_missing_keep_alive(struct ena_adapter *adapter)
 static void check_for_admin_com_state(struct ena_adapter *adapter)
 {
 	if (unlikely(!ena_com_get_admin_running_state(&adapter->ena_dev))) {
-		RTE_LOG(ERR, PMD, "ENA admin queue is not in running state!\n");
+		PMD_DRV_LOG(ERR, "ENA admin queue is not in running state!\n");
 		adapter->reset_reason = ENA_REGS_RESET_ADMIN_TO;
 		adapter->trigger_reset = true;
 	}
@@ -1575,7 +1588,7 @@ static void ena_timer_wd_callback(__rte_unused struct rte_timer *timer,
 	check_for_admin_com_state(adapter);
 
 	if (unlikely(adapter->trigger_reset)) {
-		RTE_LOG(ERR, PMD, "Trigger reset is on\n");
+		PMD_DRV_LOG(ERR, "Trigger reset is on\n");
 		_rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_RESET,
 			NULL);
 	}
@@ -1603,7 +1616,7 @@ ena_set_queues_placement_policy(struct ena_adapter *adapter,
 
 	llq_feature_mask = 1 << ENA_ADMIN_LLQ;
 	if (!(ena_dev->supported_features & llq_feature_mask)) {
-		RTE_LOG(INFO, PMD,
+		PMD_DRV_LOG(INFO,
 			"LLQ is not supported. Fallback to host mode policy.\n");
 		ena_dev->tx_mem_queue_type = ENA_ADMIN_PLACEMENT_POLICY_HOST;
 		return 0;
@@ -1622,7 +1635,7 @@ ena_set_queues_placement_policy(struct ena_adapter *adapter,
 		return 0;
 
 	if (!adapter->dev_mem_base) {
-		RTE_LOG(ERR, PMD, "Unable to access LLQ bar resource. "
+		PMD_DRV_LOG(ERR, "Unable to access LLQ bar resource. "
 			"Fallback to host mode policy.\n.");
 		ena_dev->tx_mem_queue_type = ENA_ADMIN_PLACEMENT_POLICY_HOST;
 		return 0;
@@ -1663,7 +1676,7 @@ static int ena_calc_io_queue_num(struct ena_com_dev *ena_dev,
 	io_queue_num = RTE_MIN(io_queue_num, io_tx_cq_num);
 
 	if (unlikely(io_queue_num == 0)) {
-		RTE_LOG(ERR, PMD, "Number of IO queues should not be 0\n");
+		PMD_DRV_LOG(ERR, "Number of IO queues should not be 0\n");
 		return -EFAULT;
 	}
 
@@ -1747,7 +1760,7 @@ static int eth_ena_dev_init(struct rte_eth_dev *eth_dev)
 		queue_type_str = "Regular";
 	else
 		queue_type_str = "Low latency";
-	RTE_LOG(INFO, PMD, "Placement policy: %s\n", queue_type_str);
+	PMD_DRV_LOG(INFO, "Placement policy: %s\n", queue_type_str);
 
 	calc_queue_ctx.ena_dev = ena_dev;
 	calc_queue_ctx.get_feat_ctx = &get_feat_ctx;
@@ -1799,7 +1812,7 @@ static int eth_ena_dev_init(struct rte_eth_dev *eth_dev)
 					 sizeof(*adapter->drv_stats),
 					 RTE_CACHE_LINE_SIZE);
 	if (!adapter->drv_stats) {
-		RTE_LOG(ERR, PMD, "failed to alloc mem for adapter stats\n");
+		PMD_DRV_LOG(ERR, "failed to alloc mem for adapter stats\n");
 		rc = -ENOMEM;
 		goto err_delete_debug_area;
 	}
@@ -2004,7 +2017,7 @@ static uint16_t eth_ena_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
 
 	/* Check adapter state */
 	if (unlikely(rx_ring->adapter->state != ENA_ADAPTER_STATE_RUNNING)) {
-		RTE_LOG(ALERT, PMD,
+		PMD_DRV_LOG(ALERT,
 			"Trying to receive pkts while device is NOT running\n");
 		return 0;
 	}
@@ -2024,7 +2037,7 @@ static uint16_t eth_ena_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
 				    rx_ring->ena_com_io_sq,
 				    &ena_rx_ctx);
 		if (unlikely(rc)) {
-			RTE_LOG(ERR, PMD, "ena_com_rx_pkt error %d\n", rc);
+			PMD_DRV_LOG(ERR, "ena_com_rx_pkt error %d\n", rc);
 			rx_ring->adapter->reset_reason =
 				ENA_REGS_RESET_TOO_MANY_RX_DESCS;
 			rx_ring->adapter->trigger_reset = true;
@@ -2214,7 +2227,7 @@ static int ena_check_and_linearize_mbuf(struct ena_ring *tx_ring,
 	++tx_ring->tx_stats.linearize;
 	rc = rte_pktmbuf_linearize(mbuf);
 	if (unlikely(rc)) {
-		RTE_LOG(WARNING, PMD, "Mbuf linearize failed\n");
+		PMD_DRV_LOG(WARNING, "Mbuf linearize failed\n");
 		rte_atomic64_inc(&tx_ring->adapter->drv_stats->ierrors);
 		++tx_ring->tx_stats.linearize_failed;
 		return rc;
@@ -2245,7 +2258,7 @@ static uint16_t eth_ena_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 
 	/* Check adapter state */
 	if (unlikely(tx_ring->adapter->state != ENA_ADAPTER_STATE_RUNNING)) {
-		RTE_LOG(ALERT, PMD,
+		PMD_DRV_LOG(ALERT,
 			"Trying to xmit pkts while device is NOT running\n");
 		return 0;
 	}
@@ -2342,7 +2355,7 @@ static uint16_t eth_ena_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 
 		if (ena_com_is_doorbell_needed(tx_ring->ena_com_io_sq,
 					       &ena_tx_ctx)) {
-			RTE_LOG(DEBUG, PMD, "llq tx max burst size of queue %d"
+			PMD_DRV_LOG(DEBUG, "llq tx max burst size of queue %d"
 				" achieved, writing doorbell to send burst\n",
 				tx_ring->id);
 			rte_wmb();
@@ -2601,6 +2614,30 @@ RTE_INIT(ena_init_log)
 	ena_logtype_driver = rte_log_register("pmd.net.ena.driver");
 	if (ena_logtype_driver >= 0)
 		rte_log_set_level(ena_logtype_driver, RTE_LOG_NOTICE);
+
+#ifdef RTE_LIBRTE_ENA_DEBUG_RX
+	ena_logtype_rx = rte_log_register("pmd.net.ena.rx");
+	if (ena_logtype_rx >= 0)
+		rte_log_set_level(ena_logtype_rx, RTE_LOG_NOTICE);
+#endif
+
+#ifdef RTE_LIBRTE_ENA_DEBUG_TX
+	ena_logtype_tx = rte_log_register("pmd.net.ena.tx");
+	if (ena_logtype_tx >= 0)
+		rte_log_set_level(ena_logtype_tx, RTE_LOG_NOTICE);
+#endif
+
+#ifdef RTE_LIBRTE_ENA_DEBUG_TX_FREE
+	ena_logtype_tx_free = rte_log_register("pmd.net.ena.tx_free");
+	if (ena_logtype_tx_free >= 0)
+		rte_log_set_level(ena_logtype_tx_free, RTE_LOG_NOTICE);
+#endif
+
+#ifdef RTE_LIBRTE_ENA_COM_DEBUG
+	ena_logtype_com = rte_log_register("pmd.net.ena.com");
+	if (ena_logtype_com >= 0)
+		rte_log_set_level(ena_logtype_com, RTE_LOG_NOTICE);
+#endif
 }
 
 /******************************************************************************
@@ -2632,7 +2669,7 @@ static void ena_notification(void *data,
 	struct ena_admin_ena_hw_hints *hints;
 
 	if (aenq_e->aenq_common_desc.group != ENA_ADMIN_NOTIFICATION)
-		RTE_LOG(WARNING, PMD, "Invalid group(%x) expected %x\n",
+		PMD_DRV_LOG(WARNING, "Invalid group(%x) expected %x\n",
 			aenq_e->aenq_common_desc.group,
 			ENA_ADMIN_NOTIFICATION);
 
@@ -2643,7 +2680,7 @@ static void ena_notification(void *data,
 		ena_update_hints(adapter, hints);
 		break;
 	default:
-		RTE_LOG(ERR, PMD, "Invalid aenq notification link state %d\n",
+		PMD_DRV_LOG(ERR, "Invalid aenq notification link state %d\n",
 			aenq_e->aenq_common_desc.syndrom);
 	}
 }
@@ -2668,7 +2705,7 @@ static void ena_keep_alive(void *adapter_data,
 static void unimplemented_aenq_handler(__rte_unused void *data,
 				       __rte_unused struct ena_admin_aenq_entry *aenq_e)
 {
-	RTE_LOG(ERR, PMD, "Unknown event was received or event with "
+	PMD_DRV_LOG(ERR, "Unknown event was received or event with "
 			  "unimplemented handler\n");
 }
 
diff --git a/drivers/net/ena/ena_logs.h b/drivers/net/ena/ena_logs.h
index 2c0e91b656ac..fb7fb1fc143b 100644
--- a/drivers/net/ena/ena_logs.h
+++ b/drivers/net/ena/ena_logs.h
@@ -40,22 +40,28 @@ extern int ena_logtype_init;
 		"%s(): " fmt "\n", __func__, ## args)
 
 #ifdef RTE_LIBRTE_ENA_DEBUG_RX
-#define PMD_RX_LOG(level, fmt, args...) \
-	RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
+extern int ena_logtype_rx;
+#define PMD_RX_LOG(level, fmt, args...)			\
+	rte_log(RTE_LOG_ ## level, ena_logtype_rx,	\
+		"%s(): " fmt "\n", __func__, ## args)
 #else
 #define PMD_RX_LOG(level, fmt, args...) do { } while (0)
 #endif
 
 #ifdef RTE_LIBRTE_ENA_DEBUG_TX
-#define PMD_TX_LOG(level, fmt, args...) \
-	RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
+extern int ena_logtype_tx;
+#define PMD_TX_LOG(level, fmt, args...)			\
+	rte_log(RTE_LOG_ ## level, ena_logtype_tx,	\
+		"%s(): " fmt "\n", __func__, ## args)
 #else
 #define PMD_TX_LOG(level, fmt, args...) do { } while (0)
 #endif
 
 #ifdef RTE_LIBRTE_ENA_DEBUG_TX_FREE
-#define PMD_TX_FREE_LOG(level, fmt, args...) \
-	RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
+extern int ena_logtype_tx_free;
+#define PMD_TX_FREE_LOG(level, fmt, args...)			\
+	rte_log(RTE_LOG_ ## level, ena_logtype_tx_free,	\
+		"%s(): " fmt "\n", __func__, ## args)
 #else
 #define PMD_TX_FREE_LOG(level, fmt, args...) do { } while (0)
 #endif
-- 
2.20.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [dpdk-dev] [RFC] net/ena: use dynamic log type for debug logging
  2019-07-16 20:43 [dpdk-dev] [RFC] net/ena: use dynamic log type for debug logging Stephen Hemminger
@ 2019-08-27 12:51 ` Michał Krawczyk
  2019-09-13 18:46   ` Ferruh Yigit
  0 siblings, 1 reply; 3+ messages in thread
From: Michał Krawczyk @ 2019-08-27 12:51 UTC (permalink / raw)
  To: Stephen Hemminger; +Cc: Marcin Wojtas, Tzalik, Guy, Schmeilin, Evgeny, dev

wt., 16 lip 2019 o 22:43 Stephen Hemminger
<stephen@networkplumber.org> napisał(a):
>
> The generic RTE_LOGTYPE_PMD is a historical relic and should
> not be used. Every driver must use dynamic logtypes.
>
> Compile tested only!
>
> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Michal Krawczyk <mk@semihalf.com>

> ---
>  drivers/net/ena/base/ena_plat_dpdk.h |  20 ++--
>  drivers/net/ena/ena_ethdev.c         | 167 ++++++++++++++++-----------
>  drivers/net/ena/ena_logs.h           |  18 ++-
>  3 files changed, 125 insertions(+), 80 deletions(-)
>
> diff --git a/drivers/net/ena/base/ena_plat_dpdk.h b/drivers/net/ena/base/ena_plat_dpdk.h
> index 902d91efbe38..0909bfc4835d 100644
> --- a/drivers/net/ena/base/ena_plat_dpdk.h
> +++ b/drivers/net/ena/base/ena_plat_dpdk.h
> @@ -98,11 +98,13 @@ typedef uint64_t dma_addr_t;
>  #define ENA_GET_SYSTEM_USECS()                                         \
>         (rte_get_timer_cycles() * US_PER_S / rte_get_timer_hz())
>
> +extern int ena_logtype_com;
>  #if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
>  #define ENA_ASSERT(cond, format, arg...)                               \
>         do {                                                            \
>                 if (unlikely(!(cond))) {                                \
> -                       RTE_LOG(ERR, PMD, format, ##arg);               \
> +                       rte_log(RTE_LOGTYPE_ERR, ena_logtype_com,       \
> +                               format, ##arg);                         \
>                         rte_panic("line %d\tassert \"" #cond "\""       \
>                                         "failed\n", __LINE__);          \
>                 }                                                       \
> @@ -127,14 +129,14 @@ typedef uint64_t dma_addr_t;
>                           (~0ULL >> (BITS_PER_LONG_LONG - 1 - (h))))
>
>  #ifdef RTE_LIBRTE_ENA_COM_DEBUG
> -#define ena_trc_dbg(format, arg...)                                    \
> -       RTE_LOG(DEBUG, PMD, "[ENA_COM: %s] " format, __func__, ##arg)
> -#define ena_trc_info(format, arg...)                                   \
> -       RTE_LOG(INFO, PMD, "[ENA_COM: %s] " format, __func__, ##arg)
> -#define ena_trc_warn(format, arg...)                                   \
> -       RTE_LOG(ERR, PMD, "[ENA_COM: %s] " format, __func__, ##arg)
> -#define ena_trc_err(format, arg...)                                    \
> -       RTE_LOG(ERR, PMD, "[ENA_COM: %s] " format, __func__, ##arg)
> +#define ena_trc_log(level, fmt, arg...) \
> +       rte_log(RTE_LOG_ ## level, ena_logtype_com, \
> +               "[ENA_COM: %s]" fmt, __func__, ##arg)
> +
> +#define ena_trc_dbg(format, arg...)    ena_trc_log(DEBUG, format, ##arg)
> +#define ena_trc_info(format, arg...)   ena_trc_log(INFO, format, ##arg)
> +#define ena_trc_warn(format, arg...)   ena_trc_log(WARNING, format, ##arg)
> +#define ena_trc_err(format, arg...)    ena_trc_log(ERR, format, ##arg)
>  #else
>  #define ena_trc_dbg(format, arg...) do { } while (0)
>  #define ena_trc_info(format, arg...) do { } while (0)
> diff --git a/drivers/net/ena/ena_ethdev.c b/drivers/net/ena/ena_ethdev.c
> index f5833408044c..4a67298e9d1f 100644
> --- a/drivers/net/ena/ena_ethdev.c
> +++ b/drivers/net/ena/ena_ethdev.c
> @@ -178,6 +178,19 @@ static const struct ena_stats ena_stats_rx_strings[] = {
>  int ena_logtype_init;
>  int ena_logtype_driver;
>
> +#ifdef RTE_LIBRTE_ENA_DEBUG_RX
> +int ena_logtype_rx;
> +#endif
> +#ifdef RTE_LIBRTE_ENA_DEBUG_TX
> +int ena_logtype_tx;
> +#endif
> +#ifdef RTE_LIBRTE_ENA_DEBUG_TX_FREE
> +int ena_logtype_tx_free;
> +#endif
> +#ifdef RTE_LIBRTE_ENA_COM_DEBUG
> +int ena_logtype_com;
> +#endif
> +
>  static const struct rte_pci_id pci_id_ena_map[] = {
>         { RTE_PCI_DEVICE(PCI_VENDOR_ID_AMAZON, PCI_DEVICE_ID_ENA_VF) },
>         { RTE_PCI_DEVICE(PCI_VENDOR_ID_AMAZON, PCI_DEVICE_ID_ENA_LLQ_VF) },
> @@ -358,7 +371,7 @@ static inline int validate_rx_req_id(struct ena_ring *rx_ring, uint16_t req_id)
>         if (likely(req_id < rx_ring->ring_size))
>                 return 0;
>
> -       RTE_LOG(ERR, PMD, "Invalid rx req_id: %hu\n", req_id);
> +       PMD_DRV_LOG(ERR, "Invalid rx req_id: %hu\n", req_id);
>
>         rx_ring->adapter->reset_reason = ENA_REGS_RESET_INV_RX_REQ_ID;
>         rx_ring->adapter->trigger_reset = true;
> @@ -378,9 +391,9 @@ static int validate_tx_req_id(struct ena_ring *tx_ring, u16 req_id)
>         }
>
>         if (tx_info)
> -               RTE_LOG(ERR, PMD, "tx_info doesn't have valid mbuf\n");
> +               PMD_DRV_LOG(ERR, "tx_info doesn't have valid mbuf\n");
>         else
> -               RTE_LOG(ERR, PMD, "Invalid req_id: %hu\n", req_id);
> +               PMD_DRV_LOG(ERR, "Invalid req_id: %hu\n", req_id);
>
>         /* Trigger device reset */
>         ++tx_ring->tx_stats.bad_req_id;
> @@ -397,7 +410,7 @@ static void ena_config_host_info(struct ena_com_dev *ena_dev)
>         /* Allocate only the host info */
>         rc = ena_com_allocate_host_info(ena_dev);
>         if (rc) {
> -               RTE_LOG(ERR, PMD, "Cannot allocate host info\n");
> +               PMD_DRV_LOG(ERR, "Cannot allocate host info\n");
>                 return;
>         }
>
> @@ -420,9 +433,9 @@ static void ena_config_host_info(struct ena_com_dev *ena_dev)
>         rc = ena_com_set_host_attributes(ena_dev);
>         if (rc) {
>                 if (rc == -ENA_COM_UNSUPPORTED)
> -                       RTE_LOG(WARNING, PMD, "Cannot set host attributes\n");
> +                       PMD_DRV_LOG(WARNING, "Cannot set host attributes\n");
>                 else
> -                       RTE_LOG(ERR, PMD, "Cannot set host attributes\n");
> +                       PMD_DRV_LOG(ERR, "Cannot set host attributes\n");
>
>                 goto err;
>         }
> @@ -453,16 +466,16 @@ static void ena_config_debug_area(struct ena_adapter *adapter)
>
>         rc = ena_com_allocate_debug_area(&adapter->ena_dev, debug_area_size);
>         if (rc) {
> -               RTE_LOG(ERR, PMD, "Cannot allocate debug area\n");
> +               PMD_DRV_LOG(ERR, "Cannot allocate debug area\n");
>                 return;
>         }
>
>         rc = ena_com_set_host_attributes(&adapter->ena_dev);
>         if (rc) {
>                 if (rc == -ENA_COM_UNSUPPORTED)
> -                       RTE_LOG(WARNING, PMD, "Cannot set host attributes\n");
> +                       PMD_DRV_LOG(WARNING, "Cannot set host attributes\n");
>                 else
> -                       RTE_LOG(ERR, PMD, "Cannot set host attributes\n");
> +                       PMD_DRV_LOG(ERR, "Cannot set host attributes\n");
>
>                 goto err;
>         }
> @@ -528,7 +541,7 @@ static int ena_rss_reta_update(struct rte_eth_dev *dev,
>                 return -EINVAL;
>
>         if (reta_size > ENA_RX_RSS_TABLE_SIZE) {
> -               RTE_LOG(WARNING, PMD,
> +               PMD_DRV_LOG(WARNING,
>                         "indirection table %d is bigger than supported (%d)\n",
>                         reta_size, ENA_RX_RSS_TABLE_SIZE);
>                 return -EINVAL;
> @@ -548,7 +561,7 @@ static int ena_rss_reta_update(struct rte_eth_dev *dev,
>                                                                i,
>                                                                entry_value);
>                         if (unlikely(rc && rc != ENA_COM_UNSUPPORTED)) {
> -                               RTE_LOG(ERR, PMD,
> +                               PMD_DRV_LOG(ERR,
>                                         "Cannot fill indirect table\n");
>                                 return rc;
>                         }
> @@ -557,11 +570,11 @@ static int ena_rss_reta_update(struct rte_eth_dev *dev,
>
>         rc = ena_com_indirect_table_set(ena_dev);
>         if (unlikely(rc && rc != ENA_COM_UNSUPPORTED)) {
> -               RTE_LOG(ERR, PMD, "Cannot flush the indirect table\n");
> +               PMD_DRV_LOG(ERR, "Cannot flush the indirect table\n");
>                 return rc;
>         }
>
> -       RTE_LOG(DEBUG, PMD, "%s(): RSS configured %d entries  for port %d\n",
> +       PMD_DRV_LOG(DEBUG, "%s(): RSS configured %d entries  for port %d\n",
>                 __func__, reta_size, adapter->rte_dev->data->port_id);
>
>         return 0;
> @@ -586,7 +599,7 @@ static int ena_rss_reta_query(struct rte_eth_dev *dev,
>
>         rc = ena_com_indirect_table_get(ena_dev, indirect_table);
>         if (unlikely(rc && rc != ENA_COM_UNSUPPORTED)) {
> -               RTE_LOG(ERR, PMD, "cannot get indirect table\n");
> +               PMD_DRV_LOG(ERR, "cannot get indirect table\n");
>                 return -ENOTSUP;
>         }
>
> @@ -610,7 +623,7 @@ static int ena_rss_init_default(struct ena_adapter *adapter)
>
>         rc = ena_com_rss_init(ena_dev, ENA_RX_RSS_TABLE_LOG_SIZE);
>         if (unlikely(rc)) {
> -               RTE_LOG(ERR, PMD, "Cannot init indirect table\n");
> +               PMD_DRV_LOG(ERR, "Cannot init indirect table\n");
>                 goto err_rss_init;
>         }
>
> @@ -619,7 +632,7 @@ static int ena_rss_init_default(struct ena_adapter *adapter)
>                 rc = ena_com_indirect_table_fill_entry(ena_dev, i,
>                                                        ENA_IO_RXQ_IDX(val));
>                 if (unlikely(rc && (rc != ENA_COM_UNSUPPORTED))) {
> -                       RTE_LOG(ERR, PMD, "Cannot fill indirect table\n");
> +                       PMD_DRV_LOG(ERR, "Cannot fill indirect table\n");
>                         goto err_fill_indir;
>                 }
>         }
> @@ -627,22 +640,22 @@ static int ena_rss_init_default(struct ena_adapter *adapter)
>         rc = ena_com_fill_hash_function(ena_dev, ENA_ADMIN_CRC32, NULL,
>                                         ENA_HASH_KEY_SIZE, 0xFFFFFFFF);
>         if (unlikely(rc && (rc != ENA_COM_UNSUPPORTED))) {
> -               RTE_LOG(INFO, PMD, "Cannot fill hash function\n");
> +               PMD_DRV_LOG(INFO, "Cannot fill hash function\n");
>                 goto err_fill_indir;
>         }
>
>         rc = ena_com_set_default_hash_ctrl(ena_dev);
>         if (unlikely(rc && (rc != ENA_COM_UNSUPPORTED))) {
> -               RTE_LOG(INFO, PMD, "Cannot fill hash control\n");
> +               PMD_DRV_LOG(INFO, "Cannot fill hash control\n");
>                 goto err_fill_indir;
>         }
>
>         rc = ena_com_indirect_table_set(ena_dev);
>         if (unlikely(rc && (rc != ENA_COM_UNSUPPORTED))) {
> -               RTE_LOG(ERR, PMD, "Cannot flush the indirect table\n");
> +               PMD_DRV_LOG(ERR, "Cannot flush the indirect table\n");
>                 goto err_fill_indir;
>         }
> -       RTE_LOG(DEBUG, PMD, "RSS configured for port %d\n",
> +       PMD_DRV_LOG(DEBUG, "RSS configured for port %d\n",
>                 adapter->rte_dev->data->port_id);
>
>         return 0;
> @@ -693,7 +706,7 @@ static void ena_rx_queue_release(void *queue)
>
>         ring->configured = 0;
>
> -       RTE_LOG(NOTICE, PMD, "RX Queue %d:%d released\n",
> +       PMD_DRV_LOG(NOTICE, "RX Queue %d:%d released\n",
>                 ring->port_id, ring->id);
>  }
>
> @@ -717,7 +730,7 @@ static void ena_tx_queue_release(void *queue)
>
>         ring->configured = 0;
>
> -       RTE_LOG(NOTICE, PMD, "TX Queue %d:%d released\n",
> +       PMD_DRV_LOG(NOTICE, "TX Queue %d:%d released\n",
>                 ring->port_id, ring->id);
>  }
>
> @@ -929,7 +942,7 @@ static int ena_stats_get(struct rte_eth_dev *dev,
>         memset(&ena_stats, 0, sizeof(ena_stats));
>         rc = ena_com_get_dev_basic_stats(ena_dev, &ena_stats);
>         if (unlikely(rc)) {
> -               RTE_LOG(ERR, PMD, "Could not retrieve statistics from ENA\n");
> +               PMD_DRV_LOG(ERR, "Could not retrieve statistics from ENA\n");
>                 return rc;
>         }
>
> @@ -986,7 +999,7 @@ static int ena_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
>         ena_assert_msg(ena_dev != NULL, "Uninitialized device\n");
>
>         if (mtu > ena_get_mtu_conf(adapter) || mtu < ENA_MIN_MTU) {
> -               RTE_LOG(ERR, PMD,
> +               PMD_DRV_LOG(ERR,
>                         "Invalid MTU setting. new_mtu: %d "
>                         "max mtu: %d min mtu: %d\n",
>                         mtu, ena_get_mtu_conf(adapter), ENA_MIN_MTU);
> @@ -995,9 +1008,9 @@ static int ena_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
>
>         rc = ena_com_set_dev_mtu(ena_dev, mtu);
>         if (rc)
> -               RTE_LOG(ERR, PMD, "Could not set MTU: %d\n", mtu);
> +               PMD_DRV_LOG(ERR, "Could not set MTU: %d\n", mtu);
>         else
> -               RTE_LOG(NOTICE, PMD, "Set MTU: %d\n", mtu);
> +               PMD_DRV_LOG(NOTICE, "Set MTU: %d\n", mtu);
>
>         return rc;
>  }
> @@ -1061,7 +1074,7 @@ static void ena_stop(struct rte_eth_dev *dev)
>         if (adapter->trigger_reset) {
>                 rc = ena_com_dev_reset(ena_dev, adapter->reset_reason);
>                 if (rc)
> -                       RTE_LOG(ERR, PMD, "Device reset failed rc=%d\n", rc);
> +                       PMD_DRV_LOG(ERR, "Device reset failed rc=%d\n", rc);
>         }
>
>         ++adapter->dev_stats.dev_stop;
> @@ -1103,7 +1116,7 @@ static int ena_create_io_queue(struct ena_ring *ring)
>
>         rc = ena_com_create_io_queue(ena_dev, &ctx);
>         if (rc) {
> -               RTE_LOG(ERR, PMD,
> +               PMD_DRV_LOG(ERR,
>                         "failed to create io queue #%d (qid:%d) rc: %d\n",
>                         ring->id, ena_qid, rc);
>                 return rc;
> @@ -1113,7 +1126,7 @@ static int ena_create_io_queue(struct ena_ring *ring)
>                                      &ring->ena_com_io_sq,
>                                      &ring->ena_com_io_cq);
>         if (rc) {
> -               RTE_LOG(ERR, PMD,
> +               PMD_DRV_LOG(ERR,
>                         "Failed to get io queue handlers. queue num %d rc: %d\n",
>                         ring->id, rc);
>                 ena_com_destroy_io_queue(ena_dev, ena_qid);
> @@ -1206,21 +1219,21 @@ static int ena_tx_queue_setup(struct rte_eth_dev *dev,
>         txq = &adapter->tx_ring[queue_idx];
>
>         if (txq->configured) {
> -               RTE_LOG(CRIT, PMD,
> +               PMD_DRV_LOG(CRIT,
>                         "API violation. Queue %d is already configured\n",
>                         queue_idx);
>                 return ENA_COM_FAULT;
>         }
>
>         if (!rte_is_power_of_2(nb_desc)) {
> -               RTE_LOG(ERR, PMD,
> +               PMD_DRV_LOG(ERR,
>                         "Unsupported size of TX queue: %d is not a power of 2.\n",
>                         nb_desc);
>                 return -EINVAL;
>         }
>
>         if (nb_desc > adapter->tx_ring_size) {
> -               RTE_LOG(ERR, PMD,
> +               PMD_DRV_LOG(ERR,
>                         "Unsupported size of TX queue (max size: %d)\n",
>                         adapter->tx_ring_size);
>                 return -EINVAL;
> @@ -1240,7 +1253,7 @@ static int ena_tx_queue_setup(struct rte_eth_dev *dev,
>                                           txq->ring_size,
>                                           RTE_CACHE_LINE_SIZE);
>         if (!txq->tx_buffer_info) {
> -               RTE_LOG(ERR, PMD, "failed to alloc mem for tx buffer info\n");
> +               PMD_DRV_LOG(ERR, "failed to alloc mem for tx buffer info\n");
>                 return -ENOMEM;
>         }
>
> @@ -1248,7 +1261,7 @@ static int ena_tx_queue_setup(struct rte_eth_dev *dev,
>                                          sizeof(u16) * txq->ring_size,
>                                          RTE_CACHE_LINE_SIZE);
>         if (!txq->empty_tx_reqs) {
> -               RTE_LOG(ERR, PMD, "failed to alloc mem for tx reqs\n");
> +               PMD_DRV_LOG(ERR, "failed to alloc mem for tx reqs\n");
>                 rte_free(txq->tx_buffer_info);
>                 return -ENOMEM;
>         }
> @@ -1258,7 +1271,7 @@ static int ena_tx_queue_setup(struct rte_eth_dev *dev,
>                             txq->tx_max_header_size,
>                             RTE_CACHE_LINE_SIZE);
>         if (!txq->push_buf_intermediate_buf) {
> -               RTE_LOG(ERR, PMD, "failed to alloc push buff for LLQ\n");
> +               PMD_DRV_LOG(ERR, "failed to alloc push buff for LLQ\n");
>                 rte_free(txq->tx_buffer_info);
>                 rte_free(txq->empty_tx_reqs);
>                 return -ENOMEM;
> @@ -1291,7 +1304,7 @@ static int ena_rx_queue_setup(struct rte_eth_dev *dev,
>
>         rxq = &adapter->rx_ring[queue_idx];
>         if (rxq->configured) {
> -               RTE_LOG(CRIT, PMD,
> +               PMD_DRV_LOG(CRIT,
>                         "API violation. Queue %d is already configured\n",
>                         queue_idx);
>                 return ENA_COM_FAULT;
> @@ -1301,14 +1314,14 @@ static int ena_rx_queue_setup(struct rte_eth_dev *dev,
>                 nb_desc = adapter->rx_ring_size;
>
>         if (!rte_is_power_of_2(nb_desc)) {
> -               RTE_LOG(ERR, PMD,
> +               PMD_DRV_LOG(ERR,
>                         "Unsupported size of RX queue: %d is not a power of 2.\n",
>                         nb_desc);
>                 return -EINVAL;
>         }
>
>         if (nb_desc > adapter->rx_ring_size) {
> -               RTE_LOG(ERR, PMD,
> +               PMD_DRV_LOG(ERR,
>                         "Unsupported size of RX queue (max size: %d)\n",
>                         adapter->rx_ring_size);
>                 return -EINVAL;
> @@ -1325,7 +1338,7 @@ static int ena_rx_queue_setup(struct rte_eth_dev *dev,
>                                           sizeof(struct rte_mbuf *) * nb_desc,
>                                           RTE_CACHE_LINE_SIZE);
>         if (!rxq->rx_buffer_info) {
> -               RTE_LOG(ERR, PMD, "failed to alloc mem for rx buffer info\n");
> +               PMD_DRV_LOG(ERR, "failed to alloc mem for rx buffer info\n");
>                 return -ENOMEM;
>         }
>
> @@ -1334,7 +1347,7 @@ static int ena_rx_queue_setup(struct rte_eth_dev *dev,
>                                             RTE_CACHE_LINE_SIZE);
>
>         if (!rxq->rx_refill_buffer) {
> -               RTE_LOG(ERR, PMD, "failed to alloc mem for rx refill buffer\n");
> +               PMD_DRV_LOG(ERR, "failed to alloc mem for rx refill buffer\n");
>                 rte_free(rxq->rx_buffer_info);
>                 rxq->rx_buffer_info = NULL;
>                 return -ENOMEM;
> @@ -1344,7 +1357,7 @@ static int ena_rx_queue_setup(struct rte_eth_dev *dev,
>                                          sizeof(uint16_t) * nb_desc,
>                                          RTE_CACHE_LINE_SIZE);
>         if (!rxq->empty_rx_reqs) {
> -               RTE_LOG(ERR, PMD, "failed to alloc mem for empty rx reqs\n");
> +               PMD_DRV_LOG(ERR, "failed to alloc mem for empty rx reqs\n");
>                 rte_free(rxq->rx_buffer_info);
>                 rxq->rx_buffer_info = NULL;
>                 rte_free(rxq->rx_refill_buffer);
> @@ -1408,7 +1421,7 @@ static int ena_populate_rx_queue(struct ena_ring *rxq, unsigned int count)
>                 rc = ena_com_add_single_rx_desc(rxq->ena_com_io_sq,
>                                                 &ebuf, req_id);
>                 if (unlikely(rc)) {
> -                       RTE_LOG(WARNING, PMD, "failed adding rx desc\n");
> +                       PMD_DRV_LOG(WARNING, "failed adding rx desc\n");
>                         rxq->rx_buffer_info[req_id] = NULL;
>                         break;
>                 }
> @@ -1416,7 +1429,7 @@ static int ena_populate_rx_queue(struct ena_ring *rxq, unsigned int count)
>         }
>
>         if (unlikely(i < count)) {
> -               RTE_LOG(WARNING, PMD, "refilled rx qid %d with only %d "
> +               PMD_DRV_LOG(WARNING, "refilled rx qid %d with only %d "
>                         "buffers (from %d)\n", rxq->id, i, count);
>                 rte_mempool_put_bulk(rxq->mb_pool, (void **)(&mbufs[i]),
>                                      count - i);
> @@ -1450,7 +1463,7 @@ static int ena_device_init(struct ena_com_dev *ena_dev,
>         /* Initialize mmio registers */
>         rc = ena_com_mmio_reg_read_request_init(ena_dev);
>         if (rc) {
> -               RTE_LOG(ERR, PMD, "failed to init mmio read less\n");
> +               PMD_DRV_LOG(ERR, "failed to init mmio read less\n");
>                 return rc;
>         }
>
> @@ -1465,14 +1478,14 @@ static int ena_device_init(struct ena_com_dev *ena_dev,
>         /* reset device */
>         rc = ena_com_dev_reset(ena_dev, ENA_REGS_RESET_NORMAL);
>         if (rc) {
> -               RTE_LOG(ERR, PMD, "cannot reset device\n");
> +               PMD_DRV_LOG(ERR, "cannot reset device\n");
>                 goto err_mmio_read_less;
>         }
>
>         /* check FW version */
>         rc = ena_com_validate_version(ena_dev);
>         if (rc) {
> -               RTE_LOG(ERR, PMD, "device version is too low\n");
> +               PMD_DRV_LOG(ERR, "device version is too low\n");
>                 goto err_mmio_read_less;
>         }
>
> @@ -1481,7 +1494,7 @@ static int ena_device_init(struct ena_com_dev *ena_dev,
>         /* ENA device administration layer init */
>         rc = ena_com_admin_init(ena_dev, &aenq_handlers);
>         if (rc) {
> -               RTE_LOG(ERR, PMD,
> +               PMD_DRV_LOG(ERR,
>                         "cannot initialize ena admin queue with device\n");
>                 goto err_mmio_read_less;
>         }
> @@ -1497,7 +1510,7 @@ static int ena_device_init(struct ena_com_dev *ena_dev,
>         /* Get Device Attributes and features */
>         rc = ena_com_get_dev_attr_feat(ena_dev, get_feat_ctx);
>         if (rc) {
> -               RTE_LOG(ERR, PMD,
> +               PMD_DRV_LOG(ERR,
>                         "cannot get attribute for ena device rc= %d\n", rc);
>                 goto err_admin_init;
>         }
> @@ -1511,7 +1524,7 @@ static int ena_device_init(struct ena_com_dev *ena_dev,
>         aenq_groups &= get_feat_ctx->aenq.supported_groups;
>         rc = ena_com_set_aenq_config(ena_dev, aenq_groups);
>         if (rc) {
> -               RTE_LOG(ERR, PMD, "Cannot configure aenq groups rc: %d\n", rc);
> +               PMD_DRV_LOG(ERR, "Cannot configure aenq groups rc: %d\n", rc);
>                 goto err_admin_init;
>         }
>
> @@ -1548,7 +1561,7 @@ static void check_for_missing_keep_alive(struct ena_adapter *adapter)
>
>         if (unlikely((rte_get_timer_cycles() - adapter->timestamp_wd) >=
>             adapter->keep_alive_timeout)) {
> -               RTE_LOG(ERR, PMD, "Keep alive timeout\n");
> +               PMD_DRV_LOG(ERR, "Keep alive timeout\n");
>                 adapter->reset_reason = ENA_REGS_RESET_KEEP_ALIVE_TO;
>                 adapter->trigger_reset = true;
>                 ++adapter->dev_stats.wd_expired;
> @@ -1559,7 +1572,7 @@ static void check_for_missing_keep_alive(struct ena_adapter *adapter)
>  static void check_for_admin_com_state(struct ena_adapter *adapter)
>  {
>         if (unlikely(!ena_com_get_admin_running_state(&adapter->ena_dev))) {
> -               RTE_LOG(ERR, PMD, "ENA admin queue is not in running state!\n");
> +               PMD_DRV_LOG(ERR, "ENA admin queue is not in running state!\n");
>                 adapter->reset_reason = ENA_REGS_RESET_ADMIN_TO;
>                 adapter->trigger_reset = true;
>         }
> @@ -1575,7 +1588,7 @@ static void ena_timer_wd_callback(__rte_unused struct rte_timer *timer,
>         check_for_admin_com_state(adapter);
>
>         if (unlikely(adapter->trigger_reset)) {
> -               RTE_LOG(ERR, PMD, "Trigger reset is on\n");
> +               PMD_DRV_LOG(ERR, "Trigger reset is on\n");
>                 _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_RESET,
>                         NULL);
>         }
> @@ -1603,7 +1616,7 @@ ena_set_queues_placement_policy(struct ena_adapter *adapter,
>
>         llq_feature_mask = 1 << ENA_ADMIN_LLQ;
>         if (!(ena_dev->supported_features & llq_feature_mask)) {
> -               RTE_LOG(INFO, PMD,
> +               PMD_DRV_LOG(INFO,
>                         "LLQ is not supported. Fallback to host mode policy.\n");
>                 ena_dev->tx_mem_queue_type = ENA_ADMIN_PLACEMENT_POLICY_HOST;
>                 return 0;
> @@ -1622,7 +1635,7 @@ ena_set_queues_placement_policy(struct ena_adapter *adapter,
>                 return 0;
>
>         if (!adapter->dev_mem_base) {
> -               RTE_LOG(ERR, PMD, "Unable to access LLQ bar resource. "
> +               PMD_DRV_LOG(ERR, "Unable to access LLQ bar resource. "
>                         "Fallback to host mode policy.\n.");
>                 ena_dev->tx_mem_queue_type = ENA_ADMIN_PLACEMENT_POLICY_HOST;
>                 return 0;
> @@ -1663,7 +1676,7 @@ static int ena_calc_io_queue_num(struct ena_com_dev *ena_dev,
>         io_queue_num = RTE_MIN(io_queue_num, io_tx_cq_num);
>
>         if (unlikely(io_queue_num == 0)) {
> -               RTE_LOG(ERR, PMD, "Number of IO queues should not be 0\n");
> +               PMD_DRV_LOG(ERR, "Number of IO queues should not be 0\n");
>                 return -EFAULT;
>         }
>
> @@ -1747,7 +1760,7 @@ static int eth_ena_dev_init(struct rte_eth_dev *eth_dev)
>                 queue_type_str = "Regular";
>         else
>                 queue_type_str = "Low latency";
> -       RTE_LOG(INFO, PMD, "Placement policy: %s\n", queue_type_str);
> +       PMD_DRV_LOG(INFO, "Placement policy: %s\n", queue_type_str);
>
>         calc_queue_ctx.ena_dev = ena_dev;
>         calc_queue_ctx.get_feat_ctx = &get_feat_ctx;
> @@ -1799,7 +1812,7 @@ static int eth_ena_dev_init(struct rte_eth_dev *eth_dev)
>                                          sizeof(*adapter->drv_stats),
>                                          RTE_CACHE_LINE_SIZE);
>         if (!adapter->drv_stats) {
> -               RTE_LOG(ERR, PMD, "failed to alloc mem for adapter stats\n");
> +               PMD_DRV_LOG(ERR, "failed to alloc mem for adapter stats\n");
>                 rc = -ENOMEM;
>                 goto err_delete_debug_area;
>         }
> @@ -2004,7 +2017,7 @@ static uint16_t eth_ena_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
>
>         /* Check adapter state */
>         if (unlikely(rx_ring->adapter->state != ENA_ADAPTER_STATE_RUNNING)) {
> -               RTE_LOG(ALERT, PMD,
> +               PMD_DRV_LOG(ALERT,
>                         "Trying to receive pkts while device is NOT running\n");
>                 return 0;
>         }
> @@ -2024,7 +2037,7 @@ static uint16_t eth_ena_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
>                                     rx_ring->ena_com_io_sq,
>                                     &ena_rx_ctx);
>                 if (unlikely(rc)) {
> -                       RTE_LOG(ERR, PMD, "ena_com_rx_pkt error %d\n", rc);
> +                       PMD_DRV_LOG(ERR, "ena_com_rx_pkt error %d\n", rc);
>                         rx_ring->adapter->reset_reason =
>                                 ENA_REGS_RESET_TOO_MANY_RX_DESCS;
>                         rx_ring->adapter->trigger_reset = true;
> @@ -2214,7 +2227,7 @@ static int ena_check_and_linearize_mbuf(struct ena_ring *tx_ring,
>         ++tx_ring->tx_stats.linearize;
>         rc = rte_pktmbuf_linearize(mbuf);
>         if (unlikely(rc)) {
> -               RTE_LOG(WARNING, PMD, "Mbuf linearize failed\n");
> +               PMD_DRV_LOG(WARNING, "Mbuf linearize failed\n");
>                 rte_atomic64_inc(&tx_ring->adapter->drv_stats->ierrors);
>                 ++tx_ring->tx_stats.linearize_failed;
>                 return rc;
> @@ -2245,7 +2258,7 @@ static uint16_t eth_ena_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
>
>         /* Check adapter state */
>         if (unlikely(tx_ring->adapter->state != ENA_ADAPTER_STATE_RUNNING)) {
> -               RTE_LOG(ALERT, PMD,
> +               PMD_DRV_LOG(ALERT,
>                         "Trying to xmit pkts while device is NOT running\n");
>                 return 0;
>         }
> @@ -2342,7 +2355,7 @@ static uint16_t eth_ena_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
>
>                 if (ena_com_is_doorbell_needed(tx_ring->ena_com_io_sq,
>                                                &ena_tx_ctx)) {
> -                       RTE_LOG(DEBUG, PMD, "llq tx max burst size of queue %d"
> +                       PMD_DRV_LOG(DEBUG, "llq tx max burst size of queue %d"
>                                 " achieved, writing doorbell to send burst\n",
>                                 tx_ring->id);
>                         rte_wmb();
> @@ -2601,6 +2614,30 @@ RTE_INIT(ena_init_log)
>         ena_logtype_driver = rte_log_register("pmd.net.ena.driver");
>         if (ena_logtype_driver >= 0)
>                 rte_log_set_level(ena_logtype_driver, RTE_LOG_NOTICE);
> +
> +#ifdef RTE_LIBRTE_ENA_DEBUG_RX
> +       ena_logtype_rx = rte_log_register("pmd.net.ena.rx");
> +       if (ena_logtype_rx >= 0)
> +               rte_log_set_level(ena_logtype_rx, RTE_LOG_NOTICE);
> +#endif
> +
> +#ifdef RTE_LIBRTE_ENA_DEBUG_TX
> +       ena_logtype_tx = rte_log_register("pmd.net.ena.tx");
> +       if (ena_logtype_tx >= 0)
> +               rte_log_set_level(ena_logtype_tx, RTE_LOG_NOTICE);
> +#endif
> +
> +#ifdef RTE_LIBRTE_ENA_DEBUG_TX_FREE
> +       ena_logtype_tx_free = rte_log_register("pmd.net.ena.tx_free");
> +       if (ena_logtype_tx_free >= 0)
> +               rte_log_set_level(ena_logtype_tx_free, RTE_LOG_NOTICE);
> +#endif
> +
> +#ifdef RTE_LIBRTE_ENA_COM_DEBUG
> +       ena_logtype_com = rte_log_register("pmd.net.ena.com");
> +       if (ena_logtype_com >= 0)
> +               rte_log_set_level(ena_logtype_com, RTE_LOG_NOTICE);
> +#endif
>  }
>
>  /******************************************************************************
> @@ -2632,7 +2669,7 @@ static void ena_notification(void *data,
>         struct ena_admin_ena_hw_hints *hints;
>
>         if (aenq_e->aenq_common_desc.group != ENA_ADMIN_NOTIFICATION)
> -               RTE_LOG(WARNING, PMD, "Invalid group(%x) expected %x\n",
> +               PMD_DRV_LOG(WARNING, "Invalid group(%x) expected %x\n",
>                         aenq_e->aenq_common_desc.group,
>                         ENA_ADMIN_NOTIFICATION);
>
> @@ -2643,7 +2680,7 @@ static void ena_notification(void *data,
>                 ena_update_hints(adapter, hints);
>                 break;
>         default:
> -               RTE_LOG(ERR, PMD, "Invalid aenq notification link state %d\n",
> +               PMD_DRV_LOG(ERR, "Invalid aenq notification link state %d\n",
>                         aenq_e->aenq_common_desc.syndrom);
>         }
>  }
> @@ -2668,7 +2705,7 @@ static void ena_keep_alive(void *adapter_data,
>  static void unimplemented_aenq_handler(__rte_unused void *data,
>                                        __rte_unused struct ena_admin_aenq_entry *aenq_e)
>  {
> -       RTE_LOG(ERR, PMD, "Unknown event was received or event with "
> +       PMD_DRV_LOG(ERR, "Unknown event was received or event with "
>                           "unimplemented handler\n");
>  }
>
> diff --git a/drivers/net/ena/ena_logs.h b/drivers/net/ena/ena_logs.h
> index 2c0e91b656ac..fb7fb1fc143b 100644
> --- a/drivers/net/ena/ena_logs.h
> +++ b/drivers/net/ena/ena_logs.h
> @@ -40,22 +40,28 @@ extern int ena_logtype_init;
>                 "%s(): " fmt "\n", __func__, ## args)
>
>  #ifdef RTE_LIBRTE_ENA_DEBUG_RX
> -#define PMD_RX_LOG(level, fmt, args...) \
> -       RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
> +extern int ena_logtype_rx;
> +#define PMD_RX_LOG(level, fmt, args...)                        \
> +       rte_log(RTE_LOG_ ## level, ena_logtype_rx,      \
> +               "%s(): " fmt "\n", __func__, ## args)
>  #else
>  #define PMD_RX_LOG(level, fmt, args...) do { } while (0)
>  #endif
>
>  #ifdef RTE_LIBRTE_ENA_DEBUG_TX
> -#define PMD_TX_LOG(level, fmt, args...) \
> -       RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
> +extern int ena_logtype_tx;
> +#define PMD_TX_LOG(level, fmt, args...)                        \
> +       rte_log(RTE_LOG_ ## level, ena_logtype_tx,      \
> +               "%s(): " fmt "\n", __func__, ## args)
>  #else
>  #define PMD_TX_LOG(level, fmt, args...) do { } while (0)
>  #endif
>
>  #ifdef RTE_LIBRTE_ENA_DEBUG_TX_FREE
> -#define PMD_TX_FREE_LOG(level, fmt, args...) \
> -       RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
> +extern int ena_logtype_tx_free;
> +#define PMD_TX_FREE_LOG(level, fmt, args...)                   \
> +       rte_log(RTE_LOG_ ## level, ena_logtype_tx_free, \
> +               "%s(): " fmt "\n", __func__, ## args)
>  #else
>  #define PMD_TX_FREE_LOG(level, fmt, args...) do { } while (0)
>  #endif
> --
> 2.20.1
>

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [dpdk-dev] [RFC] net/ena: use dynamic log type for debug logging
  2019-08-27 12:51 ` Michał Krawczyk
@ 2019-09-13 18:46   ` Ferruh Yigit
  0 siblings, 0 replies; 3+ messages in thread
From: Ferruh Yigit @ 2019-09-13 18:46 UTC (permalink / raw)
  To: Michał Krawczyk, Stephen Hemminger
  Cc: Marcin Wojtas, Tzalik, Guy, Schmeilin, Evgeny, dev

On 8/27/2019 1:51 PM, Michał Krawczyk wrote:
> wt., 16 lip 2019 o 22:43 Stephen Hemminger
> <stephen@networkplumber.org> napisał(a):
>>
>> The generic RTE_LOGTYPE_PMD is a historical relic and should
>> not be used. Every driver must use dynamic logtypes.
>>
>> Compile tested only!
>>
>> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
> Tested-by: Michal Krawczyk <mk@semihalf.com>

Applied to dpdk-next-net/master, thanks.

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2019-09-13 18:46 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-16 20:43 [dpdk-dev] [RFC] net/ena: use dynamic log type for debug logging Stephen Hemminger
2019-08-27 12:51 ` Michał Krawczyk
2019-09-13 18:46   ` Ferruh Yigit

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).