From: Stephen Hemminger <stephen@networkplumber.org>
To: wenzhuo.lu@intel.com, konstantin.ananyev@intel.com,
beilei.xing@intel.com, qi.z.zhang@intel.com,
xiao.w.wang@intel.com, jingjing.wu@intel.com
Cc: dev@dpdk.org, Stephen Hemminger <stephen@networkplumber.org>
Subject: [dpdk-dev] [PATCH 3/6] net/ixgbe: use dynamic log type for tx/rx debug
Date: Tue, 16 Jul 2019 08:40:10 -0700 [thread overview]
Message-ID: <20190716154013.6974-4-stephen@networkplumber.org> (raw)
In-Reply-To: <20190716154013.6974-1-stephen@networkplumber.org>
The generic RTE_LOGTYPE_PMD is a historical relic and should
not be used. Every driver must dynamic log types.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
drivers/net/ixgbe/ixgbe_ethdev.c | 27 +++++++++++++++++++++++++++
drivers/net/ixgbe/ixgbe_logs.h | 24 +++++++++++++++---------
drivers/net/ixgbe/ixgbe_pf.c | 19 ++++++++-----------
3 files changed, 50 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 22c5b2c5cabd..5c84fd046752 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -419,6 +419,16 @@ static void ixgbe_l2_tunnel_conf(struct rte_eth_dev *dev);
int ixgbe_logtype_init;
int ixgbe_logtype_driver;
+#ifdef RTE_LIBRTE_IXGBE_DEBUG_RX
+int ixgbe_logtype_rx;
+#endif
+#ifdef RTE_LIBRTE_IXGBE_DEBUG_TX
+int ixgbe_logtype_tx;
+#endif
+#ifdef RTE_LIBRTE_IXGBE_DEBUG_TX_FREE
+int ixgbe_logtype_tx_free;
+#endif
+
/*
* The set of PCI devices this driver supports
*/
@@ -8732,4 +8742,21 @@ RTE_INIT(ixgbe_init_log)
ixgbe_logtype_driver = rte_log_register("pmd.net.ixgbe.driver");
if (ixgbe_logtype_driver >= 0)
rte_log_set_level(ixgbe_logtype_driver, RTE_LOG_NOTICE);
+#ifdef RTE_LIBRTE_IXGBE_DEBUG_RX
+ ixgbe_logtype_rx = rte_log_register("pmd.net.ixgbe.rx");
+ if (ixgbe_logtype_rx >= 0)
+ rte_log_set_level(ixgbe_logtype_rx, RTE_LOG_NOTICE);
+#endif
+
+#ifdef RTE_LIBRTE_IXGBE_DEBUG_TX
+ ixgbe_logtype_tx = rte_log_register("pmd.net.ixgbe.tx");
+ if (ixgbe_logtype_tx >= 0)
+ rte_log_set_level(ixgbe_logtype_tx, RTE_LOG_NOTICE);
+#endif
+
+#ifdef RTE_LIBRTE_IXGBE_DEBUG_TX_FREE
+ ixgbe_logtype_tx_free = rte_log_register("pmd.net.ixgbe.tx_free");
+ if (ixgbe_logtype_tx_free >= 0)
+ rte_log_set_level(ixgbe_logtype_tx_free, RTE_LOG_NOTICE);
+#endif
}
diff --git a/drivers/net/ixgbe/ixgbe_logs.h b/drivers/net/ixgbe/ixgbe_logs.h
index dc73e9bded35..2a279d109813 100644
--- a/drivers/net/ixgbe/ixgbe_logs.h
+++ b/drivers/net/ixgbe/ixgbe_logs.h
@@ -13,24 +13,30 @@ extern int ixgbe_logtype_init;
#define PMD_INIT_FUNC_TRACE() PMD_INIT_LOG(DEBUG, " >>")
#ifdef RTE_LIBRTE_IXGBE_DEBUG_RX
-#define PMD_RX_LOG(level, fmt, args...) \
- RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
+extern int ixgbe_logtype_rx;
+#define PMD_RX_LOG(level, fmt, args...) \
+ rte_log(RTE_LOG_ ## level, ixgbe_logtype_rx, \
+ "%s(): " fmt "\n", __func__, ## args)
#else
-#define PMD_RX_LOG(level, fmt, args...) do { } while(0)
+#define PMD_RX_LOG(level, fmt, args...) do { } while (0)
#endif
#ifdef RTE_LIBRTE_IXGBE_DEBUG_TX
-#define PMD_TX_LOG(level, fmt, args...) \
- RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
+extern int ixgbe_logtype_tx;
+#define PMD_TX_LOG(level, fmt, args...) \
+ rte_log(RTE_LOG_ ## level, ixgbe_logtype_tx, \
+ "%s(): " fmt "\n", __func__, ## args)
#else
-#define PMD_TX_LOG(level, fmt, args...) do { } while(0)
+#define PMD_TX_LOG(level, fmt, args...) do { } while (0)
#endif
#ifdef RTE_LIBRTE_IXGBE_DEBUG_TX_FREE
-#define PMD_TX_FREE_LOG(level, fmt, args...) \
- RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
+extern int ixgbe_logtype_tx_free;
+#define PMD_TX_FREE_LOG(level, fmt, args...) \
+ rte_log(RTE_LOG_ ## level, ixgbe_logtype_tx_free, \
+ "%s(): " fmt "\n", __func__, ## args)
#else
-#define PMD_TX_FREE_LOG(level, fmt, args...) do { } while(0)
+#define PMD_TX_FREE_LOG(level, fmt, args...) do { } while (0)
#endif
extern int ixgbe_logtype_driver;
diff --git a/drivers/net/ixgbe/ixgbe_pf.c b/drivers/net/ixgbe/ixgbe_pf.c
index c88d56e24564..a9e77f21c0de 100644
--- a/drivers/net/ixgbe/ixgbe_pf.c
+++ b/drivers/net/ixgbe/ixgbe_pf.c
@@ -161,16 +161,14 @@ ixgbe_add_tx_flow_control_drop_filter(struct rte_eth_dev *eth_dev)
struct ixgbe_ethertype_filter ethertype_filter;
if (!hw->mac.ops.set_ethertype_anti_spoofing) {
- RTE_LOG(INFO, PMD, "ether type anti-spoofing is not"
- " supported.\n");
+ PMD_DRV_LOG(INFO, "ether type anti-spoofing is not supported.\n");
return;
}
i = ixgbe_ethertype_filter_lookup(filter_info,
IXGBE_ETHERTYPE_FLOW_CTRL);
if (i >= 0) {
- RTE_LOG(ERR, PMD, "A ether type filter"
- " entity for flow control already exists!\n");
+ PMD_DRV_LOG(ERR, "A ether type filter entity for flow control already exists!\n");
return;
}
@@ -183,8 +181,7 @@ ixgbe_add_tx_flow_control_drop_filter(struct rte_eth_dev *eth_dev)
i = ixgbe_ethertype_filter_insert(filter_info,
ðertype_filter);
if (i < 0) {
- RTE_LOG(ERR, PMD, "Cannot find an unused ether type filter"
- " entity for flow control.\n");
+ PMD_DRV_LOG(ERR, "Cannot find an unused ether type filter entity for flow control.\n");
return;
}
@@ -415,7 +412,7 @@ ixgbe_disable_vf_mc_promisc(struct rte_eth_dev *dev, uint32_t vf)
vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
- RTE_LOG(INFO, PMD, "VF %u: disabling multicast promiscuous\n", vf);
+ PMD_DRV_LOG(INFO, "VF %u: disabling multicast promiscuous\n", vf);
vmolr &= ~IXGBE_VMOLR_MPE;
@@ -588,7 +585,7 @@ ixgbe_negotiate_vf_api(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
break;
}
- RTE_LOG(ERR, PMD, "Negotiate invalid api version %u from VF %d\n",
+ PMD_DRV_LOG(ERR, "Negotiate invalid api version %u from VF %d\n",
api_version, vf);
return -1;
@@ -635,7 +632,7 @@ ixgbe_get_vf_queues(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
switch (eth_conf->txmode.mq_mode) {
case ETH_MQ_TX_NONE:
case ETH_MQ_TX_DCB:
- RTE_LOG(ERR, PMD, "PF must work with virtualization for VF %u"
+ PMD_DRV_LOG(ERR, "PF must work with virtualization for VF %u"
", but its tx mode = %d\n", vf,
eth_conf->txmode.mq_mode);
return -1;
@@ -670,7 +667,7 @@ ixgbe_get_vf_queues(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
break;
default:
- RTE_LOG(ERR, PMD, "PF work with invalid mode = %d\n",
+ PMD_DRV_LOG(ERR, "PF work with invalid mode = %d\n",
eth_conf->txmode.mq_mode);
return -1;
}
@@ -725,7 +722,7 @@ ixgbe_set_vf_mc_promisc(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
if (!(fctrl & IXGBE_FCTRL_UPE)) {
/* VF promisc requires PF in promisc */
- RTE_LOG(ERR, PMD,
+ PMD_DRV_LOG(ERR,
"Enabling VF promisc requires PF in promisc\n");
return -1;
}
--
2.20.1
next prev parent reply other threads:[~2019-07-16 15:40 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-16 15:40 [dpdk-dev] [PATCH 0/6] replace usage of LOGTYPE_PMD in Intel drivers Stephen Hemminger
2019-07-16 15:40 ` [dpdk-dev] [PATCH 1/6] net/e1000: use dynamic log type for tx/rx debug Stephen Hemminger
2019-08-27 8:21 ` Ferruh Yigit
2019-09-30 15:28 ` Ye Xiaolong
2019-09-30 15:50 ` Stephen Hemminger
2019-09-30 15:56 ` Ferruh Yigit
2019-09-30 16:10 ` Ferruh Yigit
2019-07-16 15:40 ` [dpdk-dev] [PATCH 2/6] net/fm10k: " Stephen Hemminger
2019-07-16 15:40 ` Stephen Hemminger [this message]
2019-08-27 8:24 ` [dpdk-dev] [PATCH 3/6] net/ixgbe: " Ferruh Yigit
2019-07-16 15:40 ` [dpdk-dev] [PATCH 4/6] net/ice: " Stephen Hemminger
2019-07-16 15:40 ` [dpdk-dev] [PATCH 5/6] net/i40e: " Stephen Hemminger
2019-07-16 15:40 ` [dpdk-dev] [PATCH 6/6] net/iavf: " Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190716154013.6974-4-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
--cc=konstantin.ananyev@intel.com \
--cc=qi.z.zhang@intel.com \
--cc=wenzhuo.lu@intel.com \
--cc=xiao.w.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).