[dpdk-dev] [PATCH 1/2] test/crypto: fix session init failure for wireless test

[dpdk-dev] [PATCH 1/2] test/crypto: fix session init failure for wireless test

[Hemant Agrawal]

This patch add the support to handle the failure in session
create for wireless related cases. Else it will cause
segment fault due to I/O on un-initialized sessions.

Fixes: b3bbd9e5f2659 ("cryptodev: support device independent sessions")
Cc: stable@dpdk.org

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
---
 app/test/test_cryptodev.c | 23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
index 05422daff..a7e93b706 100644
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -2377,6 +2377,7 @@ create_wireless_algo_hash_session(uint8_t dev_id,
 	enum rte_crypto_auth_algorithm algo)
 {
 	uint8_t hash_key[key_len];
+	int status;
 
 	struct crypto_testsuite_params *ts_params = &testsuite_params;
 	struct crypto_unittest_params *ut_params = &unittest_params;
@@ -2399,9 +2400,10 @@ create_wireless_algo_hash_session(uint8_t dev_id,
 	ut_params->sess = rte_cryptodev_sym_session_create(
 			ts_params->session_mpool);
 
-	rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
+	status = rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
 			&ut_params->auth_xform,
 			ts_params->session_priv_mpool);
+	TEST_ASSERT_EQUAL(status, 0, "session init failed");
 	TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
 	return 0;
 }
@@ -2414,7 +2416,7 @@ create_wireless_algo_cipher_session(uint8_t dev_id,
 			uint8_t iv_len)
 {
 	uint8_t cipher_key[key_len];
-
+	int status;
 	struct crypto_testsuite_params *ts_params = &testsuite_params;
 	struct crypto_unittest_params *ut_params = &unittest_params;
 
@@ -2437,9 +2439,10 @@ create_wireless_algo_cipher_session(uint8_t dev_id,
 	ut_params->sess = rte_cryptodev_sym_session_create(
 			ts_params->session_mpool);
 
-	rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
+	status = rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
 			&ut_params->cipher_xform,
 			ts_params->session_priv_mpool);
+	TEST_ASSERT_EQUAL(status, 0, "session init failed");
 	TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
 	return 0;
 }
@@ -2517,6 +2520,7 @@ create_wireless_algo_cipher_auth_session(uint8_t dev_id,
 
 {
 	uint8_t cipher_auth_key[key_len];
+	int status;
 
 	struct crypto_testsuite_params *ts_params = &testsuite_params;
 	struct crypto_unittest_params *ut_params = &unittest_params;
@@ -2554,10 +2558,11 @@ create_wireless_algo_cipher_auth_session(uint8_t dev_id,
 	ut_params->sess = rte_cryptodev_sym_session_create(
 			ts_params->session_mpool);
 
-	rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
+	status = rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
 			&ut_params->cipher_xform,
 			ts_params->session_priv_mpool);
 
+	TEST_ASSERT_EQUAL(status, 0, "session init failed");
 	TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
 	return 0;
 }
@@ -2572,6 +2577,7 @@ create_wireless_cipher_auth_session(uint8_t dev_id,
 {
 	const uint8_t key_len = tdata->key.len;
 	uint8_t cipher_auth_key[key_len];
+	int status;
 
 	struct crypto_testsuite_params *ts_params = &testsuite_params;
 	struct crypto_unittest_params *ut_params = &unittest_params;
@@ -2614,10 +2620,11 @@ create_wireless_cipher_auth_session(uint8_t dev_id,
 	ut_params->sess = rte_cryptodev_sym_session_create(
 			ts_params->session_mpool);
 
-	rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
+	status = rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
 			&ut_params->cipher_xform,
 			ts_params->session_priv_mpool);
 
+	TEST_ASSERT_EQUAL(status, 0, "session init failed");
 	TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
 	return 0;
 }
@@ -2643,7 +2650,7 @@ create_wireless_algo_auth_cipher_session(uint8_t dev_id,
 		uint8_t cipher_iv_len)
 {
 	uint8_t auth_cipher_key[key_len];
-
+	int status;
 	struct crypto_testsuite_params *ts_params = &testsuite_params;
 	struct crypto_unittest_params *ut_params = &unittest_params;
 
@@ -2677,10 +2684,10 @@ create_wireless_algo_auth_cipher_session(uint8_t dev_id,
 	ut_params->sess = rte_cryptodev_sym_session_create(
 			ts_params->session_mpool);
 
-	rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
+	status = rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
 			&ut_params->auth_xform,
 			ts_params->session_priv_mpool);
-
+	TEST_ASSERT_EQUAL(status, 0, "session init failed");
 	TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
 
 	return 0;
-- 
2.17.1

[dpdk-dev] [PATCH 2/2] crypto/dpaa2_sec: fix err handling for session init failures

[Hemant Agrawal]

The session init shall return failure if the internal
session create fails for any reasons.
Fixes: 13273250eec5 ("crypto/dpaa2_sec: support AES-GCM and CTR")
Cc: stable@dpdk.org

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
---
 drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
index 0d273bb62..26458e5d1 100644
--- a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
@@ -2165,6 +2165,7 @@ dpaa2_sec_set_session_parameters(struct rte_cryptodev *dev,
 			    struct rte_crypto_sym_xform *xform,	void *sess)
 {
 	dpaa2_sec_session *session = sess;
+	int ret;
 
 	PMD_INIT_FUNC_TRACE();
 
@@ -2180,37 +2181,37 @@ dpaa2_sec_set_session_parameters(struct rte_cryptodev *dev,
 	/* Cipher Only */
 	if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER && xform->next == NULL) {
 		session->ctxt_type = DPAA2_SEC_CIPHER;
-		dpaa2_sec_cipher_init(dev, xform, session);
+		ret = dpaa2_sec_cipher_init(dev, xform, session);
 
 	/* Authentication Only */
 	} else if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH &&
 		   xform->next == NULL) {
 		session->ctxt_type = DPAA2_SEC_AUTH;
-		dpaa2_sec_auth_init(dev, xform, session);
+		ret = dpaa2_sec_auth_init(dev, xform, session);
 
 	/* Cipher then Authenticate */
 	} else if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER &&
 		   xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH) {
 		session->ext_params.aead_ctxt.auth_cipher_text = true;
-		dpaa2_sec_aead_chain_init(dev, xform, session);
+		ret = dpaa2_sec_aead_chain_init(dev, xform, session);
 
 	/* Authenticate then Cipher */
 	} else if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH &&
 		   xform->next->type == RTE_CRYPTO_SYM_XFORM_CIPHER) {
 		session->ext_params.aead_ctxt.auth_cipher_text = false;
-		dpaa2_sec_aead_chain_init(dev, xform, session);
+		ret = dpaa2_sec_aead_chain_init(dev, xform, session);
 
 	/* AEAD operation for AES-GCM kind of Algorithms */
 	} else if (xform->type == RTE_CRYPTO_SYM_XFORM_AEAD &&
 		   xform->next == NULL) {
-		dpaa2_sec_aead_init(dev, xform, session);
+		ret = dpaa2_sec_aead_init(dev, xform, session);
 
 	} else {
 		DPAA2_SEC_ERR("Invalid crypto type");
 		return -EINVAL;
 	}
 
-	return 0;
+	return ret;
 }
 
 static int
-- 
2.17.1

Re: [dpdk-dev] [PATCH 1/2] test/crypto: fix session init failure for wireless test

[Akhil Goyal]

> 
> This patch add the support to handle the failure in session
> create for wireless related cases. Else it will cause
> segment fault due to I/O on un-initialized sessions.
> 
> Fixes: b3bbd9e5f2659 ("cryptodev: support device independent sessions")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
> ---
Applied to dpdk-next-crypto

Thanks.