From: Nithin Dabilpuram <ndabilpuram@marvell.com>
To: Hyong Youb Kim <hyonkim@cisco.com>,
David Marchand <david.marchand@redhat.com>,
Thomas Monjalon <thomas@monjalon.net>,
"Ferruh Yigit" <ferruh.yigit@intel.com>,
Anatoly Burakov <anatoly.burakov@intel.com>
Cc: <jerinj@marvell.com>, John Daley <johndale@cisco.com>,
Shahed Shaikh <shshaikh@marvell.com>, <dev@dpdk.org>,
Nithin Dabilpuram <ndabilpuram@marvell.com>
Subject: [dpdk-dev] [PATCH v4 1/3] vfio: revert change that does intr eventfd setup at probe
Date: Thu, 18 Jul 2019 20:06:26 +0530 [thread overview]
Message-ID: <20190718143628.169623-2-ndabilpuram@marvell.com> (raw)
In-Reply-To: <20190718143628.169623-1-ndabilpuram@marvell.com>
This reverts commit 89aac60e0be9ed95a87b16e3595f102f9faaffb4.
"vfio: fix interrupts race condition"
The above mentioned commit moves the interrupt's eventfd setup
to probe time but only enables one interrupt for all types of
interrupt handles i.e VFIO_MSI, VFIO_LEGACY, VFIO_MSIX, UIO.
It works fine with default case but breaks below cases specifically
for MSIX based interrupt handles.
* Applications like l3fwd-power that request rxq interrupts
while ethdev setup.
* Drivers that need > 1 MSIx interrupts to be configured for
functionality to work.
VFIO PCI for MSIx expects all the possible vectors to be setup up
when using VFIO_IRQ_SET_ACTION_TRIGGER so that they can be
allocated from kernel pci subsystem. Only way to increase the number
of vectors later is first free all by using VFIO_IRQ_SET_DATA_NONE
with action trigger and then enable new vector count.
Above commit changes the behavior of rte_intr_[enable|disable] to
only mask and unmask unlike earlier behavior and thereby
breaking above two scenarios.
Fixes: 89aac60e0be9 ("vfio: fix interrupts race condition")
Cc: david.marchand@redhat.com
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Shahed Shaikh <shshaikh@marvell.com>
---
v4:
* No change.
v3:
* Update Shahed Shaikh's tested-by
v2:
* Include tested by sign from Stephen
drivers/bus/pci/linux/pci_vfio.c | 78 ++++++------
lib/librte_eal/linux/eal/eal_interrupts.c | 201 +++++++++++++++++++++++-------
2 files changed, 191 insertions(+), 88 deletions(-)
diff --git a/drivers/bus/pci/linux/pci_vfio.c b/drivers/bus/pci/linux/pci_vfio.c
index ee31239..1ceb1c0 100644
--- a/drivers/bus/pci/linux/pci_vfio.c
+++ b/drivers/bus/pci/linux/pci_vfio.c
@@ -187,11 +187,8 @@ pci_vfio_set_bus_master(int dev_fd, bool op)
static int
pci_vfio_setup_interrupts(struct rte_pci_device *dev, int vfio_dev_fd)
{
- char irq_set_buf[sizeof(struct vfio_irq_set) + sizeof(int)];
- struct vfio_irq_set *irq_set;
- enum rte_intr_mode intr_mode;
int i, ret, intr_idx;
- int fd;
+ enum rte_intr_mode intr_mode;
/* default to invalid index */
intr_idx = VFIO_PCI_NUM_IRQS;
@@ -223,6 +220,7 @@ pci_vfio_setup_interrupts(struct rte_pci_device *dev, int vfio_dev_fd)
/* start from MSI-X interrupt type */
for (i = VFIO_PCI_MSIX_IRQ_INDEX; i >= 0; i--) {
struct vfio_irq_info irq = { .argsz = sizeof(irq) };
+ int fd = -1;
/* skip interrupt modes we don't want */
if (intr_mode != RTE_INTR_MODE_NONE &&
@@ -238,51 +236,51 @@ pci_vfio_setup_interrupts(struct rte_pci_device *dev, int vfio_dev_fd)
return -1;
}
- /* found a usable interrupt mode */
- if ((irq.flags & VFIO_IRQ_INFO_EVENTFD) != 0)
- break;
-
/* if this vector cannot be used with eventfd, fail if we explicitly
* specified interrupt type, otherwise continue */
- if (intr_mode != RTE_INTR_MODE_NONE) {
- RTE_LOG(ERR, EAL, " interrupt vector does not support eventfd!\n");
+ if ((irq.flags & VFIO_IRQ_INFO_EVENTFD) == 0) {
+ if (intr_mode != RTE_INTR_MODE_NONE) {
+ RTE_LOG(ERR, EAL,
+ " interrupt vector does not support eventfd!\n");
+ return -1;
+ } else
+ continue;
+ }
+
+ /* set up an eventfd for interrupts */
+ fd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
+ if (fd < 0) {
+ RTE_LOG(ERR, EAL, " cannot set up eventfd, "
+ "error %i (%s)\n", errno, strerror(errno));
return -1;
}
- }
- if (i < 0)
- return -1;
+ dev->intr_handle.fd = fd;
+ dev->intr_handle.vfio_dev_fd = vfio_dev_fd;
- fd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
- if (fd < 0) {
- RTE_LOG(ERR, EAL, " cannot set up eventfd, error %i (%s)\n",
- errno, strerror(errno));
- return -1;
- }
+ switch (i) {
+ case VFIO_PCI_MSIX_IRQ_INDEX:
+ intr_mode = RTE_INTR_MODE_MSIX;
+ dev->intr_handle.type = RTE_INTR_HANDLE_VFIO_MSIX;
+ break;
+ case VFIO_PCI_MSI_IRQ_INDEX:
+ intr_mode = RTE_INTR_MODE_MSI;
+ dev->intr_handle.type = RTE_INTR_HANDLE_VFIO_MSI;
+ break;
+ case VFIO_PCI_INTX_IRQ_INDEX:
+ intr_mode = RTE_INTR_MODE_LEGACY;
+ dev->intr_handle.type = RTE_INTR_HANDLE_VFIO_LEGACY;
+ break;
+ default:
+ RTE_LOG(ERR, EAL, " unknown interrupt type!\n");
+ return -1;
+ }
- irq_set = (struct vfio_irq_set *)irq_set_buf;
- irq_set->argsz = sizeof(irq_set_buf);
- irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD|VFIO_IRQ_SET_ACTION_TRIGGER;
- irq_set->index = i;
- irq_set->start = 0;
- irq_set->count = 1;
- memcpy(&irq_set->data, &fd, sizeof(int));
- if (ioctl(vfio_dev_fd, VFIO_DEVICE_SET_IRQS, irq_set) < 0) {
- RTE_LOG(ERR, EAL, " error configuring interrupt\n");
- close(fd);
- return -1;
+ return 0;
}
- dev->intr_handle.fd = fd;
- dev->intr_handle.vfio_dev_fd = vfio_dev_fd;
- if (i == VFIO_PCI_MSIX_IRQ_INDEX)
- dev->intr_handle.type = RTE_INTR_HANDLE_VFIO_MSIX;
- else if (i == VFIO_PCI_MSI_IRQ_INDEX)
- dev->intr_handle.type = RTE_INTR_HANDLE_VFIO_MSI;
- else if (i == VFIO_PCI_INTX_IRQ_INDEX)
- dev->intr_handle.type = RTE_INTR_HANDLE_VFIO_LEGACY;
-
- return 0;
+ /* if we're here, we haven't found a suitable interrupt vector */
+ return -1;
}
#ifdef HAVE_VFIO_DEV_REQ_INTERFACE
diff --git a/lib/librte_eal/linux/eal/eal_interrupts.c b/lib/librte_eal/linux/eal/eal_interrupts.c
index 27976b3..79ad5e8 100644
--- a/lib/librte_eal/linux/eal/eal_interrupts.c
+++ b/lib/librte_eal/linux/eal/eal_interrupts.c
@@ -109,19 +109,42 @@ static pthread_t intr_thread;
/* enable legacy (INTx) interrupts */
static int
-vfio_enable_intx(const struct rte_intr_handle *intr_handle)
-{
- struct vfio_irq_set irq_set;
- int ret;
-
- /* unmask INTx */
- irq_set.argsz = sizeof(irq_set);
- irq_set.flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_UNMASK;
- irq_set.index = VFIO_PCI_INTX_IRQ_INDEX;
- irq_set.start = 0;
- irq_set.count = 1;
-
- ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS, &irq_set);
+vfio_enable_intx(const struct rte_intr_handle *intr_handle) {
+ struct vfio_irq_set *irq_set;
+ char irq_set_buf[IRQ_SET_BUF_LEN];
+ int len, ret;
+ int *fd_ptr;
+
+ len = sizeof(irq_set_buf);
+
+ /* enable INTx */
+ irq_set = (struct vfio_irq_set *) irq_set_buf;
+ irq_set->argsz = len;
+ irq_set->count = 1;
+ irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER;
+ irq_set->index = VFIO_PCI_INTX_IRQ_INDEX;
+ irq_set->start = 0;
+ fd_ptr = (int *) &irq_set->data;
+ *fd_ptr = intr_handle->fd;
+
+ ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS, irq_set);
+
+ if (ret) {
+ RTE_LOG(ERR, EAL, "Error enabling INTx interrupts for fd %d\n",
+ intr_handle->fd);
+ return -1;
+ }
+
+ /* unmask INTx after enabling */
+ memset(irq_set, 0, len);
+ len = sizeof(struct vfio_irq_set);
+ irq_set->argsz = len;
+ irq_set->count = 1;
+ irq_set->flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_UNMASK;
+ irq_set->index = VFIO_PCI_INTX_IRQ_INDEX;
+ irq_set->start = 0;
+
+ ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS, irq_set);
if (ret) {
RTE_LOG(ERR, EAL, "Error unmasking INTx interrupts for fd %d\n",
@@ -133,51 +156,128 @@ vfio_enable_intx(const struct rte_intr_handle *intr_handle)
/* disable legacy (INTx) interrupts */
static int
-vfio_disable_intx(const struct rte_intr_handle *intr_handle)
-{
- struct vfio_irq_set irq_set;
- int ret;
+vfio_disable_intx(const struct rte_intr_handle *intr_handle) {
+ struct vfio_irq_set *irq_set;
+ char irq_set_buf[IRQ_SET_BUF_LEN];
+ int len, ret;
- /* mask interrupts */
- irq_set.argsz = sizeof(irq_set);
- irq_set.flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_MASK;
- irq_set.index = VFIO_PCI_INTX_IRQ_INDEX;
- irq_set.start = 0;
- irq_set.count = 1;
+ len = sizeof(struct vfio_irq_set);
- ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS, &irq_set);
+ /* mask interrupts before disabling */
+ irq_set = (struct vfio_irq_set *) irq_set_buf;
+ irq_set->argsz = len;
+ irq_set->count = 1;
+ irq_set->flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_MASK;
+ irq_set->index = VFIO_PCI_INTX_IRQ_INDEX;
+ irq_set->start = 0;
+
+ ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS, irq_set);
if (ret) {
RTE_LOG(ERR, EAL, "Error masking INTx interrupts for fd %d\n",
intr_handle->fd);
return -1;
}
+
+ /* disable INTx*/
+ memset(irq_set, 0, len);
+ irq_set->argsz = len;
+ irq_set->count = 0;
+ irq_set->flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_TRIGGER;
+ irq_set->index = VFIO_PCI_INTX_IRQ_INDEX;
+ irq_set->start = 0;
+
+ ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS, irq_set);
+
+ if (ret) {
+ RTE_LOG(ERR, EAL,
+ "Error disabling INTx interrupts for fd %d\n", intr_handle->fd);
+ return -1;
+ }
return 0;
}
+/* enable MSI interrupts */
+static int
+vfio_enable_msi(const struct rte_intr_handle *intr_handle) {
+ int len, ret;
+ char irq_set_buf[IRQ_SET_BUF_LEN];
+ struct vfio_irq_set *irq_set;
+ int *fd_ptr;
+
+ len = sizeof(irq_set_buf);
+
+ irq_set = (struct vfio_irq_set *) irq_set_buf;
+ irq_set->argsz = len;
+ irq_set->count = 1;
+ irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER;
+ irq_set->index = VFIO_PCI_MSI_IRQ_INDEX;
+ irq_set->start = 0;
+ fd_ptr = (int *) &irq_set->data;
+ *fd_ptr = intr_handle->fd;
+
+ ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS, irq_set);
+
+ if (ret) {
+ RTE_LOG(ERR, EAL, "Error enabling MSI interrupts for fd %d\n",
+ intr_handle->fd);
+ return -1;
+ }
+ return 0;
+}
+
+/* disable MSI interrupts */
+static int
+vfio_disable_msi(const struct rte_intr_handle *intr_handle) {
+ struct vfio_irq_set *irq_set;
+ char irq_set_buf[IRQ_SET_BUF_LEN];
+ int len, ret;
+
+ len = sizeof(struct vfio_irq_set);
+
+ irq_set = (struct vfio_irq_set *) irq_set_buf;
+ irq_set->argsz = len;
+ irq_set->count = 0;
+ irq_set->flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_TRIGGER;
+ irq_set->index = VFIO_PCI_MSI_IRQ_INDEX;
+ irq_set->start = 0;
+
+ ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS, irq_set);
+
+ if (ret)
+ RTE_LOG(ERR, EAL,
+ "Error disabling MSI interrupts for fd %d\n", intr_handle->fd);
+
+ return ret;
+}
+
/* enable MSI-X interrupts */
static int
-vfio_enable_msix(const struct rte_intr_handle *intr_handle)
-{
+vfio_enable_msix(const struct rte_intr_handle *intr_handle) {
+ int len, ret;
char irq_set_buf[MSIX_IRQ_SET_BUF_LEN];
struct vfio_irq_set *irq_set;
- int len, ret;
-
- if (intr_handle->nb_efd == 0)
- return 0;
+ int *fd_ptr;
len = sizeof(irq_set_buf);
irq_set = (struct vfio_irq_set *) irq_set_buf;
irq_set->argsz = len;
+ /* 0 < irq_set->count < RTE_MAX_RXTX_INTR_VEC_ID + 1 */
+ irq_set->count = intr_handle->max_intr ?
+ (intr_handle->max_intr > RTE_MAX_RXTX_INTR_VEC_ID + 1 ?
+ RTE_MAX_RXTX_INTR_VEC_ID + 1 : intr_handle->max_intr) : 1;
irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER;
irq_set->index = VFIO_PCI_MSIX_IRQ_INDEX;
- irq_set->start = RTE_INTR_VEC_RXTX_OFFSET;
- irq_set->count = intr_handle->nb_efd;
- memcpy(&irq_set->data, intr_handle->efds,
- sizeof(*intr_handle->efds) * intr_handle->nb_efd);
+ irq_set->start = 0;
+ fd_ptr = (int *) &irq_set->data;
+ /* INTR vector offset 0 reserve for non-efds mapping */
+ fd_ptr[RTE_INTR_VEC_ZERO_OFFSET] = intr_handle->fd;
+ memcpy(&fd_ptr[RTE_INTR_VEC_RXTX_OFFSET], intr_handle->efds,
+ sizeof(*intr_handle->efds) * intr_handle->nb_efd);
ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS, irq_set);
+
if (ret) {
RTE_LOG(ERR, EAL, "Error enabling MSI-X interrupts for fd %d\n",
intr_handle->fd);
@@ -189,21 +289,22 @@ vfio_enable_msix(const struct rte_intr_handle *intr_handle)
/* disable MSI-X interrupts */
static int
-vfio_disable_msix(const struct rte_intr_handle *intr_handle)
-{
- struct vfio_irq_set irq_set;
- int ret;
+vfio_disable_msix(const struct rte_intr_handle *intr_handle) {
+ struct vfio_irq_set *irq_set;
+ char irq_set_buf[MSIX_IRQ_SET_BUF_LEN];
+ int len, ret;
- if (intr_handle->nb_efd == 0)
- return 0;
+ len = sizeof(struct vfio_irq_set);
- irq_set.argsz = sizeof(irq_set);
- irq_set.flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_TRIGGER;
- irq_set.index = VFIO_PCI_MSIX_IRQ_INDEX;
- irq_set.start = RTE_INTR_VEC_RXTX_OFFSET;
- irq_set.count = intr_handle->nb_efd;
+ irq_set = (struct vfio_irq_set *) irq_set_buf;
+ irq_set->argsz = len;
+ irq_set->count = 0;
+ irq_set->flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_TRIGGER;
+ irq_set->index = VFIO_PCI_MSIX_IRQ_INDEX;
+ irq_set->start = 0;
+
+ ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS, irq_set);
- ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS, &irq_set);
if (ret)
RTE_LOG(ERR, EAL,
"Error disabling MSI-X interrupts for fd %d\n", intr_handle->fd);
@@ -564,7 +665,9 @@ rte_intr_enable(const struct rte_intr_handle *intr_handle)
return -1;
break;
case RTE_INTR_HANDLE_VFIO_MSI:
- return 0;
+ if (vfio_enable_msi(intr_handle))
+ return -1;
+ break;
case RTE_INTR_HANDLE_VFIO_LEGACY:
if (vfio_enable_intx(intr_handle))
return -1;
@@ -618,7 +721,9 @@ rte_intr_disable(const struct rte_intr_handle *intr_handle)
return -1;
break;
case RTE_INTR_HANDLE_VFIO_MSI:
- return 0;
+ if (vfio_disable_msi(intr_handle))
+ return -1;
+ break;
case RTE_INTR_HANDLE_VFIO_LEGACY:
if (vfio_disable_intx(intr_handle))
return -1;
--
2.8.4
next prev parent reply other threads:[~2019-07-18 14:36 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-17 11:58 [dpdk-dev] [PATCH 0/3] vfio: fix broken msix interrupt initialization Nithin Dabilpuram
2019-07-17 11:58 ` [dpdk-dev] [PATCH 1/3] vfio: revert change that does intr eventfd setup at probe Nithin Dabilpuram
2019-07-19 9:13 ` Nowak, DamianX
2019-07-17 11:58 ` [dpdk-dev] [PATCH 2/3] eal: add ack interrupt API Nithin Dabilpuram
2019-07-17 11:58 ` [dpdk-dev] [PATCH 3/3] drivers/net: use ack API in interrupt handlers Nithin Dabilpuram
2019-07-17 12:47 ` Hyong Youb Kim (hyonkim)
2019-07-17 17:18 ` Shahed Shaikh
2019-07-17 12:43 ` [dpdk-dev] [PATCH v2 0/3] vfio: fix broken msix interrupt initialization Nithin Dabilpuram
2019-07-17 12:43 ` [dpdk-dev] [PATCH v2 1/3] vfio: revert change that does intr eventfd setup at probe Nithin Dabilpuram
2019-07-17 12:43 ` [dpdk-dev] [PATCH v2 2/3] eal: add ack interrupt API Nithin Dabilpuram
2019-07-17 12:57 ` Hyong Youb Kim (hyonkim)
2019-07-17 14:35 ` [dpdk-dev] [EXT] " Nithin Kumar Dabilpuram
2019-07-17 15:05 ` Hyong Youb Kim (hyonkim)
2019-07-17 15:16 ` Nithin Kumar Dabilpuram
2019-07-18 10:22 ` Burakov, Anatoly
2019-07-17 12:43 ` [dpdk-dev] [PATCH v2 3/3] drivers/net: use ack API in interrupt handlers Nithin Dabilpuram
2019-07-18 8:46 ` [dpdk-dev] [PATCH v3 0/3] vfio: fix broken msix interrupt initialization Nithin Dabilpuram
2019-07-18 8:46 ` [dpdk-dev] [PATCH v3 1/3] vfio: revert change that does intr eventfd setup at probe Nithin Dabilpuram
2019-07-18 8:46 ` [dpdk-dev] [PATCH v3 2/3] eal: add ack interrupt API Nithin Dabilpuram
2019-07-18 13:13 ` Burakov, Anatoly
2019-07-18 13:27 ` [dpdk-dev] [EXT] " Jerin Jacob Kollanukkaran
2019-07-18 13:30 ` Nithin Kumar Dabilpuram
2019-07-18 8:46 ` [dpdk-dev] [PATCH v3 3/3] drivers/net: use ack API in interrupt handlers Nithin Dabilpuram
2019-07-18 14:36 ` [dpdk-dev] [PATCH v4 0/3] vfio: fix broken msix interrupt initialization Nithin Dabilpuram
2019-07-18 14:36 ` Nithin Dabilpuram [this message]
2019-07-19 8:28 ` [dpdk-dev] [PATCH v4 1/3] vfio: revert change that does intr eventfd setup at probe Yao, Lei A
2019-07-22 19:27 ` David Marchand
2019-07-18 14:36 ` [dpdk-dev] [PATCH v4 2/3] eal: add ack interrupt API Nithin Dabilpuram
2019-07-22 19:28 ` David Marchand
2019-07-18 14:36 ` [dpdk-dev] [PATCH v4 3/3] drivers/net: use ack API in interrupt handlers Nithin Dabilpuram
2019-07-22 19:29 ` David Marchand
2019-07-22 19:38 ` [dpdk-dev] [PATCH v4 0/3] vfio: fix broken msix interrupt initialization David Marchand
2019-07-23 5:32 ` [dpdk-dev] [EXT] " Nithin Kumar Dabilpuram
2019-07-23 8:04 ` [dpdk-dev] [PATCH v5 " David Marchand
2019-07-23 8:04 ` [dpdk-dev] [PATCH v5 1/3] vfio: revert change that does intr eventfd setup at probe David Marchand
2019-07-23 8:04 ` [dpdk-dev] [PATCH v5 2/3] eal: add ack interrupt API David Marchand
2019-07-23 8:04 ` [dpdk-dev] [PATCH v5 3/3] drivers/net: use ack API in interrupt handlers David Marchand
2019-07-23 10:01 ` [dpdk-dev] [PATCH v5 0/3] vfio: fix broken msix interrupt initialization Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190718143628.169623-2-ndabilpuram@marvell.com \
--to=ndabilpuram@marvell.com \
--cc=anatoly.burakov@intel.com \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=hyonkim@cisco.com \
--cc=jerinj@marvell.com \
--cc=johndale@cisco.com \
--cc=shshaikh@marvell.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).