DPDK patches and discussions
 help / color / mirror / Atom feed
From: Nithin Dabilpuram <ndabilpuram@marvell.com>
To: Hyong Youb Kim <hyonkim@cisco.com>,
	David Marchand <david.marchand@redhat.com>,
	Thomas Monjalon <thomas@monjalon.net>,
	"Ferruh Yigit" <ferruh.yigit@intel.com>,
	Bruce Richardson <bruce.richardson@intel.com>
Cc: <jerinj@marvell.com>, John Daley <johndale@cisco.com>,
	Shahed Shaikh <shshaikh@marvell.com>, <dev@dpdk.org>,
	Nithin Dabilpuram <ndabilpuram@marvell.com>
Subject: [dpdk-dev] [PATCH v4 2/3] eal: add ack interrupt API
Date: Thu, 18 Jul 2019 20:06:27 +0530	[thread overview]
Message-ID: <20190718143628.169623-3-ndabilpuram@marvell.com> (raw)
In-Reply-To: <20190718143628.169623-1-ndabilpuram@marvell.com>

Add new ack interrupt API to avoid using
VFIO_IRQ_SET_ACTION_TRIGGER(rte_intr_enable()) for
acking interrupt purpose for VFIO based interrupt handlers.
This implementation is specific to Linux.

Using rte_intr_enable() for acking interrupt has below issues

 * Time consuming to do for every interrupt received as it will
   free_irq() followed by request_irq() and all other initializations
 * A race condition because of a window between free_irq() and
   request_irq() with packet reception still on and device still
   enabled and would throw warning messages like below.
   [158764.159833] do_IRQ: 9.34 No irq handler for vector

In this patch, rte_intr_ack() is a no-op for VFIO_MSIX/VFIO_MSI interrupts
as they are edge triggered and kernel would not mask the interrupt before
delivering the event to userspace and we don't need to ack.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Shahed Shaikh <shshaikh@marvell.com>
---
v4:
* Move note to implementation and change 
  the expectation to must call for new api.
v3:
* Update note on new api
v2:
* No change

 lib/librte_eal/common/include/rte_interrupts.h | 18 ++++++
 lib/librte_eal/freebsd/eal/eal_interrupts.c    |  9 +++
 lib/librte_eal/linux/eal/eal_interrupts.c      | 90 ++++++++++++++++++++++++++
 lib/librte_eal/rte_eal_version.map             |  1 +
 4 files changed, 118 insertions(+)

diff --git a/lib/librte_eal/common/include/rte_interrupts.h b/lib/librte_eal/common/include/rte_interrupts.h
index c1e912c..c463265 100644
--- a/lib/librte_eal/common/include/rte_interrupts.h
+++ b/lib/librte_eal/common/include/rte_interrupts.h
@@ -118,6 +118,24 @@ int rte_intr_enable(const struct rte_intr_handle *intr_handle);
  */
 int rte_intr_disable(const struct rte_intr_handle *intr_handle);
 
+/**
+ * It acks an interrupt raised for the specified handle.
+ *
+ * This function should be called at the end of each interrupt
+ * handler either from application or driver, so that
+ * currently raised interrupt is acked and further
+ * new interrupts are raised.
+ *
+ * @param intr_handle
+ *  pointer to the interrupt handle.
+ *
+ * @return
+ *  - On success, zero.
+ *  - On failure, a negative value.
+ */
+__rte_experimental
+int rte_intr_ack(const struct rte_intr_handle *intr_handle);
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/lib/librte_eal/freebsd/eal/eal_interrupts.c b/lib/librte_eal/freebsd/eal/eal_interrupts.c
index 10375bd..f6831b7 100644
--- a/lib/librte_eal/freebsd/eal/eal_interrupts.c
+++ b/lib/librte_eal/freebsd/eal/eal_interrupts.c
@@ -387,6 +387,15 @@ rte_intr_disable(const struct rte_intr_handle *intr_handle)
 	return 0;
 }
 
+int
+rte_intr_ack(const struct rte_intr_handle *intr_handle)
+{
+	if (intr_handle && intr_handle->type == RTE_INTR_HANDLE_VDEV)
+		return 0;
+
+	return -1;
+}
+
 static void
 eal_intr_process_interrupts(struct kevent *events, int nfds)
 {
diff --git a/lib/librte_eal/linux/eal/eal_interrupts.c b/lib/librte_eal/linux/eal/eal_interrupts.c
index 79ad5e8..794374e 100644
--- a/lib/librte_eal/linux/eal/eal_interrupts.c
+++ b/lib/librte_eal/linux/eal/eal_interrupts.c
@@ -197,6 +197,35 @@ vfio_disable_intx(const struct rte_intr_handle *intr_handle) {
 	return 0;
 }
 
+/* unmask/ack legacy (INTx) interrupts */
+static int
+vfio_ack_intx(const struct rte_intr_handle *intr_handle)
+{
+	struct vfio_irq_set *irq_set;
+	char irq_set_buf[IRQ_SET_BUF_LEN];
+	int len, ret;
+
+	len = sizeof(struct vfio_irq_set);
+
+	/* unmask INTx */
+	irq_set = (struct vfio_irq_set *) irq_set_buf;
+	memset(irq_set, 0, len);
+	irq_set->argsz = len;
+	irq_set->count = 1;
+	irq_set->flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_UNMASK;
+	irq_set->index = VFIO_PCI_INTX_IRQ_INDEX;
+	irq_set->start = 0;
+
+	ret = ioctl(intr_handle->vfio_dev_fd, VFIO_DEVICE_SET_IRQS, irq_set);
+
+	if (ret) {
+		RTE_LOG(ERR, EAL, "Error unmasking INTx interrupts for fd %d\n",
+			intr_handle->fd);
+		return -1;
+	}
+	return 0;
+}
+
 /* enable MSI interrupts */
 static int
 vfio_enable_msi(const struct rte_intr_handle *intr_handle) {
@@ -693,6 +722,67 @@ rte_intr_enable(const struct rte_intr_handle *intr_handle)
 	return 0;
 }
 
+
+/**
+ *  PMD generally calls this function at the end of its IRQ callback.
+ *  Internally, it unmasks the interrupt if possible. For INTx, unmasking
+ *  is required as the interrupt is auto-masked prior to invoking
+ *  callback. For MSI/MSI-X, unmasking is typically not needed as the
+ *  interrupt is not auto-masked. In fact, for interrupt handle types
+ *  VFIO_MSIX and VFIO_MSI, this function is no-op.
+ */
+int
+rte_intr_ack(const struct rte_intr_handle *intr_handle)
+{
+	if (intr_handle && intr_handle->type == RTE_INTR_HANDLE_VDEV)
+		return 0;
+
+	if (!intr_handle || intr_handle->fd < 0 || intr_handle->uio_cfg_fd < 0)
+		return -1;
+
+	switch (intr_handle->type) {
+	/* Both acking and disabling are same for UIO */
+	case RTE_INTR_HANDLE_UIO:
+		if (uio_intr_enable(intr_handle))
+			return -1;
+		break;
+	case RTE_INTR_HANDLE_UIO_INTX:
+		if (uio_intx_intr_enable(intr_handle))
+			return -1;
+		break;
+	/* not used at this moment */
+	case RTE_INTR_HANDLE_ALARM:
+		return -1;
+#ifdef VFIO_PRESENT
+		/* Since VFIO_MSIX is implicitly acked
+		 * unlike INTx, we report success
+		 */
+	case RTE_INTR_HANDLE_VFIO_MSIX:
+	case RTE_INTR_HANDLE_VFIO_MSI:
+		return 0;
+	case RTE_INTR_HANDLE_VFIO_LEGACY:
+		if (vfio_ack_intx(intr_handle))
+			return -1;
+		break;
+#ifdef HAVE_VFIO_DEV_REQ_INTERFACE
+	case RTE_INTR_HANDLE_VFIO_REQ:
+		return -1;
+#endif
+#endif
+	/* not used at this moment */
+	case RTE_INTR_HANDLE_DEV_EVENT:
+		return -1;
+	/* unknown handle type */
+	default:
+		RTE_LOG(ERR, EAL,
+			"Unknown handle type of fd %d\n",
+					intr_handle->fd);
+		return -1;
+	}
+
+	return 0;
+}
+
 int
 rte_intr_disable(const struct rte_intr_handle *intr_handle)
 {
diff --git a/lib/librte_eal/rte_eal_version.map b/lib/librte_eal/rte_eal_version.map
index 1892d9e..0537a6d 100644
--- a/lib/librte_eal/rte_eal_version.map
+++ b/lib/librte_eal/rte_eal_version.map
@@ -407,4 +407,5 @@ EXPERIMENTAL {
 	rte_lcore_to_cpu_id;
 	rte_mcfg_timer_lock;
 	rte_mcfg_timer_unlock;
+	rte_intr_ack;
 };
-- 
2.8.4


  parent reply	other threads:[~2019-07-18 14:36 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-17 11:58 [dpdk-dev] [PATCH 0/3] vfio: fix broken msix interrupt initialization Nithin Dabilpuram
2019-07-17 11:58 ` [dpdk-dev] [PATCH 1/3] vfio: revert change that does intr eventfd setup at probe Nithin Dabilpuram
2019-07-19  9:13   ` Nowak, DamianX
2019-07-17 11:58 ` [dpdk-dev] [PATCH 2/3] eal: add ack interrupt API Nithin Dabilpuram
2019-07-17 11:58 ` [dpdk-dev] [PATCH 3/3] drivers/net: use ack API in interrupt handlers Nithin Dabilpuram
2019-07-17 12:47   ` Hyong Youb Kim (hyonkim)
2019-07-17 17:18   ` Shahed Shaikh
2019-07-17 12:43 ` [dpdk-dev] [PATCH v2 0/3] vfio: fix broken msix interrupt initialization Nithin Dabilpuram
2019-07-17 12:43   ` [dpdk-dev] [PATCH v2 1/3] vfio: revert change that does intr eventfd setup at probe Nithin Dabilpuram
2019-07-17 12:43   ` [dpdk-dev] [PATCH v2 2/3] eal: add ack interrupt API Nithin Dabilpuram
2019-07-17 12:57     ` Hyong Youb Kim (hyonkim)
2019-07-17 14:35       ` [dpdk-dev] [EXT] " Nithin Kumar Dabilpuram
2019-07-17 15:05         ` Hyong Youb Kim (hyonkim)
2019-07-17 15:16           ` Nithin Kumar Dabilpuram
2019-07-18 10:22           ` Burakov, Anatoly
2019-07-17 12:43   ` [dpdk-dev] [PATCH v2 3/3] drivers/net: use ack API in interrupt handlers Nithin Dabilpuram
2019-07-18  8:46 ` [dpdk-dev] [PATCH v3 0/3] vfio: fix broken msix interrupt initialization Nithin Dabilpuram
2019-07-18  8:46   ` [dpdk-dev] [PATCH v3 1/3] vfio: revert change that does intr eventfd setup at probe Nithin Dabilpuram
2019-07-18  8:46   ` [dpdk-dev] [PATCH v3 2/3] eal: add ack interrupt API Nithin Dabilpuram
2019-07-18 13:13     ` Burakov, Anatoly
2019-07-18 13:27       ` [dpdk-dev] [EXT] " Jerin Jacob Kollanukkaran
2019-07-18 13:30         ` Nithin Kumar Dabilpuram
2019-07-18  8:46   ` [dpdk-dev] [PATCH v3 3/3] drivers/net: use ack API in interrupt handlers Nithin Dabilpuram
2019-07-18 14:36 ` [dpdk-dev] [PATCH v4 0/3] vfio: fix broken msix interrupt initialization Nithin Dabilpuram
2019-07-18 14:36   ` [dpdk-dev] [PATCH v4 1/3] vfio: revert change that does intr eventfd setup at probe Nithin Dabilpuram
2019-07-19  8:28     ` Yao, Lei A
2019-07-22 19:27     ` David Marchand
2019-07-18 14:36   ` Nithin Dabilpuram [this message]
2019-07-22 19:28     ` [dpdk-dev] [PATCH v4 2/3] eal: add ack interrupt API David Marchand
2019-07-18 14:36   ` [dpdk-dev] [PATCH v4 3/3] drivers/net: use ack API in interrupt handlers Nithin Dabilpuram
2019-07-22 19:29     ` David Marchand
2019-07-22 19:38   ` [dpdk-dev] [PATCH v4 0/3] vfio: fix broken msix interrupt initialization David Marchand
2019-07-23  5:32     ` [dpdk-dev] [EXT] " Nithin Kumar Dabilpuram
2019-07-23  8:04 ` [dpdk-dev] [PATCH v5 " David Marchand
2019-07-23  8:04   ` [dpdk-dev] [PATCH v5 1/3] vfio: revert change that does intr eventfd setup at probe David Marchand
2019-07-23  8:04   ` [dpdk-dev] [PATCH v5 2/3] eal: add ack interrupt API David Marchand
2019-07-23  8:04   ` [dpdk-dev] [PATCH v5 3/3] drivers/net: use ack API in interrupt handlers David Marchand
2019-07-23 10:01   ` [dpdk-dev] [PATCH v5 0/3] vfio: fix broken msix interrupt initialization Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190718143628.169623-3-ndabilpuram@marvell.com \
    --to=ndabilpuram@marvell.com \
    --cc=bruce.richardson@intel.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=hyonkim@cisco.com \
    --cc=jerinj@marvell.com \
    --cc=johndale@cisco.com \
    --cc=shshaikh@marvell.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).