DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jack Min <jackmin@mellanox.com>
To: Dekel Peled <dekelp@mellanox.com>
Cc: Yongseok Koh <yskoh@mellanox.com>,
	Slava Ovsiienko <viacheslavo@mellanox.com>,
	Shahaf Shuler <shahafs@mellanox.com>,
	Ori Kam <orika@mellanox.com>, "dev@dpdk.org" <dev@dpdk.org>,
	"stable@dpdk.org" <stable@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v2] net/mlx5: fix NVGRE matching
Date: Tue, 23 Jul 2019 01:12:16 +0000	[thread overview]
Message-ID: <20190723011206.bshd7bmco73g3hqs@mellanox.com> (raw)
In-Reply-To: <313676cd6e86314bcf2c187529a697827b78698e.1563808985.git.dekelp@mellanox.com>

On Mon, 19-07-22, 18:36, Dekel Peled wrote:
> NVGRE has a GRE header with c_rsvd0_ver value 0x2000 and protocol
> value 0x6558.
> These should be matched when item_nvgre is provided.
> 
> This patch adds validation function of NVGRE item.
> It also updates the translate function of NVGRE item, to add the
> required values, if they were not specified.
> 
> Original work by Xiaoyu Min <jackmin@mellanox.com>
> 
> Fixes: fc2c498ccb94 ("net/mlx5: add Direct Verbs translate items")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
> ---
>  drivers/net/mlx5/mlx5_flow.c    | 63 +++++++++++++++++++++++++++++++++++++++++
>  drivers/net/mlx5/mlx5_flow.h    | 10 +++++--
>  drivers/net/mlx5/mlx5_flow_dv.c | 25 ++++++++++++++--
>  drivers/net/mlx5/mlx5_rxtx.h    |  2 +-
>  4 files changed, 95 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
> index e082cbb..3d2d5fc 100644
> --- a/drivers/net/mlx5/mlx5_flow.c
> +++ b/drivers/net/mlx5/mlx5_flow.c
> @@ -298,6 +298,10 @@ struct mlx5_flow_tunnel_info {
>  		.tunnel = MLX5_FLOW_LAYER_MPLS,
>  		.ptype = RTE_PTYPE_TUNNEL_MPLS_IN_GRE,
>  	},
> +	{
> +		.tunnel = MLX5_FLOW_LAYER_NVGRE,
> +		.ptype = RTE_PTYPE_TUNNEL_NVGRE,
> +	},
>  };
>  
>  /**
> @@ -1323,6 +1327,11 @@ uint32_t mlx5_flow_adjust_priority(struct rte_eth_dev *dev, int32_t priority,
>  		return rte_flow_error_set(error, EINVAL,
>  					  RTE_FLOW_ERROR_TYPE_ITEM, item,
>  					  "L3 cannot follow an L4 layer.");
> +	else if ((item_flags & MLX5_FLOW_LAYER_NVGRE) &&
> +		  !(item_flags & MLX5_FLOW_LAYER_INNER_L2))
> +		return rte_flow_error_set(error, EINVAL,
> +					  RTE_FLOW_ERROR_TYPE_ITEM, item,
> +					  "L3 cannot follow an NVGRE layer.");
>  	if (!mask)
>  		mask = &rte_flow_item_ipv4_mask;
>  	else if (mask->hdr.next_proto_id != 0 &&
> @@ -1409,6 +1418,11 @@ uint32_t mlx5_flow_adjust_priority(struct rte_eth_dev *dev, int32_t priority,
>  		return rte_flow_error_set(error, EINVAL,
>  					  RTE_FLOW_ERROR_TYPE_ITEM, item,
>  					  "L3 cannot follow an L4 layer.");
> +	else if ((item_flags & MLX5_FLOW_LAYER_NVGRE) &&
> +		  !(item_flags & MLX5_FLOW_LAYER_INNER_L2))
> +		return rte_flow_error_set(error, EINVAL,
> +					  RTE_FLOW_ERROR_TYPE_ITEM, item,
> +					  "L3 cannot follow an NVGRE layer.");
>  	if (!mask)
>  		mask = &rte_flow_item_ipv6_mask;
>  	ret = mlx5_flow_item_acceptable(item, (const uint8_t *)mask,
> @@ -1887,6 +1901,55 @@ uint32_t mlx5_flow_adjust_priority(struct rte_eth_dev *dev, int32_t priority,
>  				  " update.");
>  }
>  
> +/**
> + * Validate NVGRE item.
> + *
> + * @param[in] item
> + *   Item specification.
> + * @param[in] item_flags
> + *   Bit flags to mark detected items.
> + * @param[in] target_protocol
> + *   The next protocol in the previous item.
> + * @param[out] error
> + *   Pointer to error structure.
> + *
> + * @return
> + *   0 on success, a negative errno value otherwise and rte_errno is set.
> + */
> +int
> +mlx5_flow_validate_item_nvgre(const struct rte_flow_item *item,
> +			      uint64_t item_flags,
> +			      uint8_t target_protocol,
> +			      struct rte_flow_error *error)
> +{
> +	const struct rte_flow_item_nvgre *mask = item->mask;
> +	int ret;
> +
> +	if (target_protocol != 0xff && target_protocol != IPPROTO_GRE)
> +		return rte_flow_error_set(error, EINVAL,
> +					  RTE_FLOW_ERROR_TYPE_ITEM, item,
> +					  "protocol filtering not compatible"
> +					  " with this GRE layer");
> +	if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
> +		return rte_flow_error_set(error, ENOTSUP,
> +					  RTE_FLOW_ERROR_TYPE_ITEM, item,
> +					  "multiple tunnel layers not"
> +					  " supported");
> +	if (!(item_flags & MLX5_FLOW_LAYER_OUTER_L3))
> +		return rte_flow_error_set(error, ENOTSUP,
> +					  RTE_FLOW_ERROR_TYPE_ITEM, item,
> +					  "L3 Layer is missing");
> +	if (!mask)
> +		mask = &rte_flow_item_nvgre_mask;
> +	ret = mlx5_flow_item_acceptable
> +		(item, (const uint8_t *)mask,
> +		 (const uint8_t *)&rte_flow_item_nvgre_mask,
> +		 sizeof(struct rte_flow_item_nvgre), error);
> +	if (ret < 0)
> +		return ret;
> +	return 0;
> +}
> +
>  static int
>  flow_null_validate(struct rte_eth_dev *dev __rte_unused,
>  		   const struct rte_flow_attr *attr __rte_unused,
> diff --git a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
> index 3f96bec..24da74b 100644
> --- a/drivers/net/mlx5/mlx5_flow.h
> +++ b/drivers/net/mlx5/mlx5_flow.h
> @@ -48,6 +48,7 @@
>  #define MLX5_FLOW_LAYER_VXLAN_GPE (1u << 13)
>  #define MLX5_FLOW_LAYER_GRE (1u << 14)
>  #define MLX5_FLOW_LAYER_MPLS (1u << 15)
> +/* List of tunnel Layer bits continued below. */
>  
>  /* General pattern items bits. */
>  #define MLX5_FLOW_ITEM_METADATA (1u << 16)
> @@ -58,8 +59,10 @@
>  #define MLX5_FLOW_LAYER_ICMP6 (1u << 19)
>  #define MLX5_FLOW_LAYER_GRE_KEY (1u << 20)
>  
> +/* Pattern tunnel Layer bits (continued). */
>  #define MLX5_FLOW_LAYER_IPIP (1u << 21)
>  #define MLX5_FLOW_LAYER_IPV6_ENCAP (1u << 22)
> +#define MLX5_FLOW_LAYER_NVGRE (1u << 23)
>  
>  /* Outer Masks. */
>  #define MLX5_FLOW_LAYER_OUTER_L3 \
> @@ -79,7 +82,7 @@
>  /* Tunnel Masks. */
>  #define MLX5_FLOW_LAYER_TUNNEL \
>  	(MLX5_FLOW_LAYER_VXLAN | MLX5_FLOW_LAYER_VXLAN_GPE | \
> -	 MLX5_FLOW_LAYER_GRE | MLX5_FLOW_LAYER_MPLS | \
> +	 MLX5_FLOW_LAYER_GRE | MLX5_FLOW_LAYER_NVGRE | MLX5_FLOW_LAYER_MPLS | \
>  	 MLX5_FLOW_LAYER_IPIP | MLX5_FLOW_LAYER_IPV6_ENCAP)
>  
>  /* Inner Masks. */
> @@ -518,5 +521,8 @@ int mlx5_flow_validate_item_icmp6(const struct rte_flow_item *item,
>  				   uint64_t item_flags,
>  				   uint8_t target_protocol,
>  				   struct rte_flow_error *error);
> -
> +int mlx5_flow_validate_item_nvgre(const struct rte_flow_item *item,
> +				  uint64_t item_flags,
> +				  uint8_t target_protocol,
> +				  struct rte_flow_error *error);
>  #endif /* RTE_PMD_MLX5_FLOW_H_ */
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
> index 7240d3b..f1d32bd 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -2966,7 +2966,6 @@ struct field_modify_info modify_tcp[] = {
>  					     MLX5_FLOW_LAYER_OUTER_L4_UDP;
>  			break;
>  		case RTE_FLOW_ITEM_TYPE_GRE:
> -		case RTE_FLOW_ITEM_TYPE_NVGRE:
>  			ret = mlx5_flow_validate_item_gre(items, item_flags,
>  							  next_protocol, error);
>  			if (ret < 0)
> @@ -2974,6 +2973,14 @@ struct field_modify_info modify_tcp[] = {
>  			gre_item = items;
>  			last_item = MLX5_FLOW_LAYER_GRE;
>  			break;
> +		case RTE_FLOW_ITEM_TYPE_NVGRE:
> +			ret = mlx5_flow_validate_item_nvgre(items, item_flags,
> +							    next_protocol,
> +							    error);
> +			if (ret < 0)
> +				return ret;
> +			last_item = MLX5_FLOW_LAYER_NVGRE;
> +			break;
>  		case RTE_FLOW_ITEM_TYPE_GRE_KEY:
>  			ret = mlx5_flow_validate_item_gre_key
>  				(items, item_flags, gre_item, error);
> @@ -3919,7 +3926,21 @@ struct field_modify_info modify_tcp[] = {
>  	int size;
>  	int i;
>  
> -	flow_dv_translate_item_gre(matcher, key, item, inner);
> +	/* For NVGRE, GRE header fields must be set with defined values. */
> +	const struct rte_flow_item_gre gre_spec = {
> +		.c_rsvd0_ver = RTE_BE16(0x2000),
> +		.protocol = RTE_BE16(RTE_ETHER_TYPE_TEB)
> +	};
> +	const struct rte_flow_item_gre gre_mask = {
> +		.c_rsvd0_ver = RTE_BE16(0xB000),
> +		.protocol = RTE_BE16(UINT16_MAX),
> +	};
> +	const struct rte_flow_item gre_item = {
> +		.spec = &gre_spec,
> +		.mask = &gre_mask,
> +		.last = NULL,
> +	};
> +	flow_dv_translate_item_gre(matcher, key, &gre_item, inner);
>  	if (!nvgre_v)
>  		return;
>  	if (!nvgre_m)
> diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
> index 4252832..928d6c3 100644
> --- a/drivers/net/mlx5/mlx5_rxtx.h
> +++ b/drivers/net/mlx5/mlx5_rxtx.h
> @@ -40,7 +40,7 @@
>  #include "mlx5_glue.h"
>  
>  /* Support tunnel matching. */
> -#define MLX5_FLOW_TUNNEL 5
> +#define MLX5_FLOW_TUNNEL 6
>  
>  struct mlx5_rxq_stats {
>  #ifdef MLX5_PMD_SOFT_COUNTERS
> -- 
> 1.8.3.1
> 

  reply	other threads:[~2019-07-23  1:12 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-18 19:42 [dpdk-dev] [PATCH] " Dekel Peled
2019-07-22  9:30 ` Jack Min
2019-07-22 11:33   ` Dekel Peled
2019-07-22 12:09     ` Jack Min
2019-07-22 15:38       ` Dekel Peled
2019-07-22 15:36 ` [dpdk-dev] [PATCH v2] " Dekel Peled
2019-07-23  1:12   ` Jack Min [this message]
2019-07-23  7:33   ` Raslan Darawsheh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190723011206.bshd7bmco73g3hqs@mellanox.com \
    --to=jackmin@mellanox.com \
    --cc=dekelp@mellanox.com \
    --cc=dev@dpdk.org \
    --cc=orika@mellanox.com \
    --cc=shahafs@mellanox.com \
    --cc=stable@dpdk.org \
    --cc=viacheslavo@mellanox.com \
    --cc=yskoh@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).