DPDK patches and discussions
 help / color / mirror / Atom feed
From: Ye Xiaolong <xiaolong.ye@intel.com>
To: Xiao Zhang <xiao.zhang@intel.com>
Cc: dev@dpdk.org, stable@dpdk.org
Subject: Re: [dpdk-dev] [v6] net/i40e: fix vf runtime queues rss config
Date: Tue, 13 Aug 2019 22:55:16 +0800	[thread overview]
Message-ID: <20190813145516.GC15941@intel.com> (raw)
In-Reply-To: <1565734665-72404-1-git-send-email-xiao.zhang@intel.com>

On 08/14, Xiao Zhang wrote:
>I40evf queue can not work properly with kernel pf driver for X722 vf. 
>Eg. when configure 8 queues pair, only 4 queues can receive packets, 
>and half packets will be lost if using 2 queues pair.
>This issue is caused by misconfiguration of look up table, the original
>code of LUT configuration did not work for X722 vf, use aq command to 
>setup the LUT to make it work properly.
>
>Fixes: cea7a51c1750 ("i40evf: support RSS")
>Cc: stable@dpdk.org
>
>Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
>---
>v6 update commit message
>v5 fix compile issue
>v4 move local variable definition to the begin of the function
>v3 move LUT configuration in to i40evf_configure_rss
>v2 change for loop format to avoid build patch issue
>---
> drivers/net/i40e/i40e_ethdev_vf.c | 32 ++++++++++++++++++++++++++------
> 1 file changed, 26 insertions(+), 6 deletions(-)
>
>diff --git a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
>index 308fb98..c77b30c 100644
>--- a/drivers/net/i40e/i40e_ethdev_vf.c
>+++ b/drivers/net/i40e/i40e_ethdev_vf.c
>@@ -2598,7 +2598,10 @@ i40evf_config_rss(struct i40e_vf *vf)
> 	struct i40e_hw *hw = I40E_VF_TO_HW(vf);
> 	struct rte_eth_rss_conf rss_conf;
> 	uint32_t i, j, lut = 0, nb_q = (I40E_VFQF_HLUT_MAX_INDEX + 1) * 4;
>+	uint32_t rss_lut_size = (I40E_VFQF_HLUT1_MAX_INDEX + 1) * 4;
> 	uint16_t num;
>+	uint8_t *lut_info;
>+	int ret;
> 
> 	if (vf->dev_data->dev_conf.rxmode.mq_mode != ETH_MQ_RX_RSS) {
> 		i40evf_disable_rss(vf);
>@@ -2608,12 +2611,29 @@ i40evf_config_rss(struct i40e_vf *vf)
> 
> 	num = RTE_MIN(vf->dev_data->nb_rx_queues, I40E_MAX_QP_NUM_PER_VF);
> 	/* Fill out the look up table */
>-	for (i = 0, j = 0; i < nb_q; i++, j++) {
>-		if (j >= num)
>-			j = 0;
>-		lut = (lut << 8) | j;
>-		if ((i & 3) == 3)
>-			I40E_WRITE_REG(hw, I40E_VFQF_HLUT(i >> 2), lut);
>+	if (!(vf->flags & I40E_FLAG_RSS_AQ_CAPABLE)) {
>+		for (i = 0, j = 0; i < nb_q; i++, j++) {
>+			if (j >= num)
>+				j = 0;
>+			lut = (lut << 8) | j;
>+			if ((i & 3) == 3)
>+				I40E_WRITE_REG(hw, I40E_VFQF_HLUT(i >> 2), lut);
>+		}
>+	} else {
>+		lut_info = rte_zmalloc("i40e_rss_lut", rss_lut_size, 0);
>+		if (!lut_info) {
>+			PMD_DRV_LOG(ERR, "No memory can be allocated");
>+			return -ENOMEM;
>+		}
>+
>+		for (i = 0; i < rss_lut_size; i++)
>+			lut_info[i] = i % vf->num_queue_pairs;
>+
>+		ret = i40evf_set_rss_lut(&vf->vsi, lut_info,
>+					 rss_lut_size);
>+		rte_free(lut_info);
>+		if (ret)
>+			return ret;
> 	}
> 
> 	rss_conf = vf->dev_data->dev_conf.rx_adv_conf.rss_conf;
>-- 
>2.7.4
>

Applied to dpdk-next-net-intel with Beilei's ack.

      reply	other threads:[~2019-08-13 14:56 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-07  0:09 [dpdk-dev] " Xiao Zhang
2019-08-08 16:41 ` [dpdk-dev] [v2] " Xiao Zhang
2019-08-09  2:44   ` Xing, Beilei
2019-08-09  3:25     ` Zhang, Xiao
2019-08-12 10:29   ` [dpdk-dev] [v3] " Xiao Zhang
2019-08-12 17:43     ` [dpdk-dev] [v4] " Xiao Zhang
2019-08-12 12:07       ` Aaron Conole
2019-08-13  1:43       ` Xing, Beilei
2019-08-13 10:40       ` [dpdk-dev] [v5] " Xiao Zhang
2019-08-13  2:21         ` Xing, Beilei
2019-08-13  6:28         ` Ye Xiaolong
2019-08-13  7:24           ` Zhang, Xiao
2019-08-13  7:37             ` Ye Xiaolong
2019-08-13  7:59               ` Zhang, Xiao
2019-08-13 22:17         ` [dpdk-dev] [v6] " Xiao Zhang
2019-08-13 14:55           ` Ye Xiaolong [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190813145516.GC15941@intel.com \
    --to=xiaolong.ye@intel.com \
    --cc=dev@dpdk.org \
    --cc=stable@dpdk.org \
    --cc=xiao.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).