From: Adam Dybkowski <adamx.dybkowski@intel.com>
To: dev@dpdk.org, fiona.trahe@intel.com, akhil.goyal@nxp.com,
arturx.trybula@intel.com
Cc: Adam Dybkowski <adamx.dybkowski@intel.com>
Subject: [dpdk-dev] [PATCH 3/4] test/compress: add stateful decompression tests
Date: Mon, 26 Aug 2019 09:45:00 +0200 [thread overview]
Message-ID: <20190826074501.10653-3-adamx.dybkowski@intel.com> (raw)
In-Reply-To: <20190826074501.10653-1-adamx.dybkowski@intel.com>
This patch adds two new tests that cover the stateful
decompression feature.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
---
app/test/test_compressdev.c | 452 +++++++++++++++++++++++++++++++-----
1 file changed, 395 insertions(+), 57 deletions(-)
diff --git a/app/test/test_compressdev.c b/app/test/test_compressdev.c
index 992eac8e0..e92540eee 100644
--- a/app/test/test_compressdev.c
+++ b/app/test/test_compressdev.c
@@ -95,11 +95,15 @@ struct interim_data_params {
};
struct test_data_params {
- enum rte_comp_op_type state;
+ enum rte_comp_op_type compress_state;
+ enum rte_comp_op_type decompress_state;
enum varied_buff buff_type;
enum zlib_direction zlib_dir;
unsigned int out_of_space;
unsigned int big_data;
+ /* stateful decompression specific parameters */
+ unsigned int decompress_output_block_size;
+ unsigned int decompress_steps_max;
};
static struct comp_testsuite_params testsuite_params = { 0 };
@@ -237,7 +241,7 @@ generic_ut_setup(void)
.socket_id = rte_socket_id(),
.nb_queue_pairs = 1,
.max_nb_priv_xforms = NUM_MAX_XFORMS,
- .max_nb_streams = 0
+ .max_nb_streams = 1
};
if (rte_compressdev_configure(0, &config) < 0) {
@@ -275,7 +279,7 @@ test_compressdev_invalid_configuration(void)
.socket_id = rte_socket_id(),
.nb_queue_pairs = 1,
.max_nb_priv_xforms = NUM_MAX_XFORMS,
- .max_nb_streams = 0
+ .max_nb_streams = 1
};
struct rte_compressdev_info dev_info;
@@ -724,7 +728,8 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
struct rte_comp_xform **compress_xforms = int_data->compress_xforms;
struct rte_comp_xform **decompress_xforms = int_data->decompress_xforms;
unsigned int num_xforms = int_data->num_xforms;
- enum rte_comp_op_type state = test_data->state;
+ enum rte_comp_op_type compress_state = test_data->compress_state;
+ enum rte_comp_op_type decompress_state = test_data->decompress_state;
unsigned int buff_type = test_data->buff_type;
unsigned int out_of_space = test_data->out_of_space;
unsigned int big_data = test_data->big_data;
@@ -754,6 +759,13 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
rte_compressdev_capability_get(0, RTE_COMP_ALGO_DEFLATE);
char *contig_buf = NULL;
uint64_t compress_checksum[num_bufs];
+ void *stream = NULL;
+ char *all_decomp_data = NULL;
+ unsigned int decomp_produced_data_size = 0;
+ unsigned int step = 0;
+
+ TEST_ASSERT(decompress_state == RTE_COMP_OP_STATELESS || num_bufs == 1,
+ "Number of stateful operations in a step should be 1");
if (capa == NULL) {
RTE_LOG(ERR, USER1,
@@ -768,6 +780,12 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
memset(ops_processed, 0, sizeof(struct rte_comp_op *) * num_bufs);
memset(priv_xforms, 0, sizeof(void *) * num_bufs);
+ if (decompress_state == RTE_COMP_OP_STATEFUL) {
+ data_size = strlen(test_bufs[0]) + 1;
+ all_decomp_data = rte_malloc(NULL, data_size,
+ RTE_CACHE_LINE_SIZE);
+ }
+
if (big_data)
buf_pool = ts_params->big_mbuf_pool;
else if (buff_type == SGL_BOTH)
@@ -859,9 +877,9 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
ops[i]->src.offset = 0;
ops[i]->src.length = rte_pktmbuf_pkt_len(uncomp_bufs[i]);
ops[i]->dst.offset = 0;
- if (state == RTE_COMP_OP_STATELESS) {
+ if (compress_state == RTE_COMP_OP_STATELESS)
ops[i]->flush_flag = RTE_COMP_FLUSH_FINAL;
- } else {
+ else {
RTE_LOG(ERR, USER1,
"Stateful operations are not supported "
"in these tests yet\n");
@@ -1047,6 +1065,9 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
(ops_processed[i] + 1);
if (out_of_space == 1 && oos_zlib_compress)
data_size = OUT_OF_SPACE_BUF;
+ else if (test_data->decompress_output_block_size != 0)
+ data_size =
+ test_data->decompress_output_block_size;
else
data_size =
strlen(test_bufs[priv_data->orig_idx]) + 1;
@@ -1067,6 +1088,9 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
(ops_processed[i] + 1);
if (out_of_space == 1 && oos_zlib_compress)
data_size = OUT_OF_SPACE_BUF;
+ else if (test_data->decompress_output_block_size != 0)
+ data_size =
+ test_data->decompress_output_block_size;
else
data_size =
strlen(test_bufs[priv_data->orig_idx]) + 1;
@@ -1094,9 +1118,14 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
* number of bytes that were produced in the previous stage
*/
ops[i]->src.length = ops_processed[i]->produced;
+
ops[i]->dst.offset = 0;
- if (state == RTE_COMP_OP_STATELESS) {
+ if (decompress_state == RTE_COMP_OP_STATELESS) {
ops[i]->flush_flag = RTE_COMP_FLUSH_FINAL;
+ ops[i]->op_type = RTE_COMP_OP_STATELESS;
+ } else if (zlib_dir == ZLIB_COMPRESS || zlib_dir == ZLIB_NONE) {
+ ops[i]->flush_flag = RTE_COMP_FLUSH_SYNC;
+ ops[i]->op_type = RTE_COMP_OP_STATEFUL;
} else {
RTE_LOG(ERR, USER1,
"Stateful operations are not supported "
@@ -1133,33 +1162,12 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
ops_processed[i] = ops[i];
}
} else {
- /* Create decompress private xform data */
- for (i = 0; i < num_xforms; i++) {
- ret = rte_compressdev_private_xform_create(0,
- (const struct rte_comp_xform *)decompress_xforms[i],
- &priv_xforms[i]);
- if (ret < 0) {
- RTE_LOG(ERR, USER1,
- "Decompression private xform "
- "could not be created\n");
- goto exit;
- }
- num_priv_xforms++;
- }
-
- if (capa->comp_feature_flags & RTE_COMP_FF_SHAREABLE_PRIV_XFORM) {
- /* Attach shareable private xform data to ops */
- for (i = 0; i < num_bufs; i++) {
- priv_data = (struct priv_op_data *)(ops[i] + 1);
- uint16_t xform_idx = priv_data->orig_idx %
- num_xforms;
- ops[i]->private_xform = priv_xforms[xform_idx];
- }
- } else {
- /* Create rest of the private xforms for the other ops */
- for (i = num_xforms; i < num_bufs; i++) {
+ if (decompress_state == RTE_COMP_OP_STATELESS) {
+ /* Create decompress private xform data */
+ for (i = 0; i < num_xforms; i++) {
ret = rte_compressdev_private_xform_create(0,
- decompress_xforms[i % num_xforms],
+ (const struct rte_comp_xform *)
+ decompress_xforms[i],
&priv_xforms[i]);
if (ret < 0) {
RTE_LOG(ERR, USER1,
@@ -1170,14 +1178,60 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
num_priv_xforms++;
}
- /* Attach non shareable private xform data to ops */
- for (i = 0; i < num_bufs; i++) {
- priv_data = (struct priv_op_data *)(ops[i] + 1);
- uint16_t xform_idx = priv_data->orig_idx;
- ops[i]->private_xform = priv_xforms[xform_idx];
+ if (capa->comp_feature_flags &
+ RTE_COMP_FF_SHAREABLE_PRIV_XFORM) {
+ /* Attach shareable private xform data to ops */
+ for (i = 0; i < num_bufs; i++) {
+ priv_data = (struct priv_op_data *)
+ (ops[i] + 1);
+ uint16_t xform_idx =
+ priv_data->orig_idx % num_xforms;
+ ops[i]->private_xform =
+ priv_xforms[xform_idx];
+ }
+ } else {
+ /* Create rest of the private xforms */
+ /* for the other ops */
+ for (i = num_xforms; i < num_bufs; i++) {
+ ret =
+ rte_compressdev_private_xform_create(0,
+ decompress_xforms[i % num_xforms],
+ &priv_xforms[i]);
+ if (ret < 0) {
+ RTE_LOG(ERR, USER1,
+ "Decompression private xform could not be created\n");
+ goto exit;
+ }
+ num_priv_xforms++;
+ }
+
+ /* Attach non shareable private xform data */
+ /* to ops */
+ for (i = 0; i < num_bufs; i++) {
+ priv_data = (struct priv_op_data *)
+ (ops[i] + 1);
+ uint16_t xform_idx =
+ priv_data->orig_idx;
+ ops[i]->private_xform =
+ priv_xforms[xform_idx];
+ }
}
+ } else {
+ /* Create a stream object for stateful decompression */
+ ret = rte_compressdev_stream_create(0,
+ decompress_xforms[0], &stream);
+ if (ret < 0) {
+ RTE_LOG(ERR, USER1,
+ "Decompression stream could not be created, error %d\n",
+ ret);
+ goto exit;
+ }
+ /* Attach stream to ops */
+ for (i = 0; i < num_bufs; i++)
+ ops[i]->stream = stream;
}
+next_step:
/* Enqueue and dequeue all operations */
num_enqd = rte_compressdev_enqueue_burst(0, 0, ops, num_bufs);
if (num_enqd < num_bufs) {
@@ -1233,9 +1287,8 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
for (i = 0; i < num_bufs; i++) {
if (out_of_space && oos_zlib_compress) {
if (ops_processed[i]->status !=
- RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED) {
+ RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED) {
ret_status = -1;
-
RTE_LOG(ERR, USER1,
"Operation without expected out of "
"space status error\n");
@@ -1244,7 +1297,75 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
continue;
}
- if (ops_processed[i]->status != RTE_COMP_OP_STATUS_SUCCESS) {
+ if (decompress_state == RTE_COMP_OP_STATEFUL
+ && (ops_processed[i]->status ==
+ RTE_COMP_OP_STATUS_OUT_OF_SPACE_RECOVERABLE
+ || ops_processed[i]->status ==
+ RTE_COMP_OP_STATUS_SUCCESS)) {
+ /* collect the output into all_decomp_data */
+ const void *ptr = rte_pktmbuf_read(
+ ops_processed[i]->m_dst,
+ ops_processed[i]->dst.offset,
+ ops_processed[i]->produced,
+ all_decomp_data +
+ decomp_produced_data_size);
+ if (ptr != all_decomp_data + decomp_produced_data_size)
+ rte_memcpy(all_decomp_data +
+ decomp_produced_data_size,
+ ptr, ops_processed[i]->produced);
+ decomp_produced_data_size += ops_processed[i]->produced;
+ if (ops_processed[i]->src.length >
+ ops_processed[i]->consumed) {
+ if (ops_processed[i]->status ==
+ RTE_COMP_OP_STATUS_SUCCESS) {
+ ret_status = -1;
+ RTE_LOG(ERR, USER1,
+ "Operation finished too early\n");
+ goto exit;
+ }
+ step++;
+ if (step >= test_data->decompress_steps_max) {
+ ret_status = -1;
+ RTE_LOG(ERR, USER1,
+ "Operation exceeded maximum steps\n");
+ goto exit;
+ }
+ ops[i] = ops_processed[i];
+ ops[i]->status =
+ RTE_COMP_OP_STATUS_NOT_PROCESSED;
+ ops[i]->src.offset +=
+ ops_processed[i]->consumed;
+ ops[i]->src.length -=
+ ops_processed[i]->consumed;
+ goto next_step;
+ } else {
+ /* Compare the original stream with the */
+ /* decompressed stream (in size and the data) */
+ priv_data = (struct priv_op_data *)
+ (ops_processed[i] + 1);
+ const char *buf1 =
+ test_bufs[priv_data->orig_idx];
+ const char *buf2 = all_decomp_data;
+
+ if (compare_buffers(buf1, strlen(buf1) + 1,
+ buf2, decomp_produced_data_size) < 0)
+ goto exit;
+ /* Test checksums */
+ if (compress_xforms[0]->compress.chksum
+ != RTE_COMP_CHECKSUM_NONE) {
+ if (ops_processed[i]->output_chksum
+ != compress_checksum[i]) {
+ RTE_LOG(ERR, USER1,
+ "The checksums differ\n"
+ "Compression Checksum: %" PRIu64 "\tDecompression "
+ "Checksum: %" PRIu64 "\n", compress_checksum[i],
+ ops_processed[i]->output_chksum);
+ goto exit;
+ }
+ }
+ }
+ } else if (ops_processed[i]->status !=
+ RTE_COMP_OP_STATUS_SUCCESS) {
RTE_LOG(ERR, USER1,
"Some operations were not successful\n");
goto exit;
@@ -1254,7 +1375,8 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
comp_bufs[priv_data->orig_idx] = NULL;
}
- if (out_of_space && oos_zlib_compress) {
+ if ((out_of_space && oos_zlib_compress)
+ || (decompress_state == RTE_COMP_OP_STATEFUL)) {
ret_status = 0;
goto exit;
}
@@ -1307,10 +1429,13 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
rte_comp_op_free(ops[i]);
rte_comp_op_free(ops_processed[i]);
}
- for (i = 0; i < num_priv_xforms; i++) {
+ for (i = 0; i < num_priv_xforms; i++)
if (priv_xforms[i] != NULL)
rte_compressdev_private_xform_free(0, priv_xforms[i]);
- }
+ if (stream != NULL)
+ rte_compressdev_stream_free(0, stream);
+ if (all_decomp_data != NULL)
+ rte_free(all_decomp_data);
rte_free(contig_buf);
return ret_status;
@@ -1354,10 +1479,13 @@ test_compressdev_deflate_stateless_fixed(void)
};
struct test_data_params test_data = {
+ RTE_COMP_OP_STATELESS,
RTE_COMP_OP_STATELESS,
LB_BOTH,
ZLIB_DECOMPRESS,
0,
+ 0,
+ 0,
0
};
@@ -1425,10 +1553,13 @@ test_compressdev_deflate_stateless_dynamic(void)
};
struct test_data_params test_data = {
+ RTE_COMP_OP_STATELESS,
RTE_COMP_OP_STATELESS,
LB_BOTH,
ZLIB_DECOMPRESS,
0,
+ 0,
+ 0,
0
};
@@ -1479,10 +1610,13 @@ test_compressdev_deflate_stateless_multi_op(void)
};
struct test_data_params test_data = {
+ RTE_COMP_OP_STATELESS,
RTE_COMP_OP_STATELESS,
LB_BOTH,
ZLIB_DECOMPRESS,
0,
+ 0,
+ 0,
0
};
@@ -1529,10 +1663,13 @@ test_compressdev_deflate_stateless_multi_level(void)
};
struct test_data_params test_data = {
+ RTE_COMP_OP_STATELESS,
RTE_COMP_OP_STATELESS,
LB_BOTH,
ZLIB_DECOMPRESS,
0,
+ 0,
+ 0,
0
};
@@ -1619,10 +1756,13 @@ test_compressdev_deflate_stateless_multi_xform(void)
};
struct test_data_params test_data = {
+ RTE_COMP_OP_STATELESS,
RTE_COMP_OP_STATELESS,
LB_BOTH,
ZLIB_DECOMPRESS,
0,
+ 0,
+ 0,
0
};
@@ -1665,10 +1805,13 @@ test_compressdev_deflate_stateless_sgl(void)
};
struct test_data_params test_data = {
+ RTE_COMP_OP_STATELESS,
RTE_COMP_OP_STATELESS,
SGL_BOTH,
ZLIB_DECOMPRESS,
0,
+ 0,
+ 0,
0
};
@@ -1773,10 +1916,13 @@ test_compressdev_deflate_stateless_checksum(void)
};
struct test_data_params test_data = {
+ RTE_COMP_OP_STATELESS,
RTE_COMP_OP_STATELESS,
LB_BOTH,
ZLIB_DECOMPRESS,
0,
+ 0,
+ 0,
0
};
@@ -1876,7 +2022,7 @@ test_compressdev_out_of_space_buffer(void)
uint16_t i;
const struct rte_compressdev_capabilities *capab;
- RTE_LOG(ERR, USER1, "This is a negative test errors are expected\n");
+ RTE_LOG(INFO, USER1, "This is a negative test, errors are expected\n");
capab = rte_compressdev_capability_get(0, RTE_COMP_ALGO_DEFLATE);
TEST_ASSERT(capab != NULL, "Failed to retrieve device capabilities");
@@ -1884,16 +2030,6 @@ test_compressdev_out_of_space_buffer(void)
if ((capab->comp_feature_flags & RTE_COMP_FF_HUFFMAN_FIXED) == 0)
return -ENOTSUP;
- struct rte_comp_xform *compress_xform =
- rte_malloc(NULL, sizeof(struct rte_comp_xform), 0);
-
- if (compress_xform == NULL) {
- RTE_LOG(ERR, USER1,
- "Compress xform could not be created\n");
- ret = TEST_FAILED;
- goto exit;
- }
-
struct interim_data_params int_data = {
&compress_test_bufs[0],
1,
@@ -1904,10 +2040,13 @@ test_compressdev_out_of_space_buffer(void)
};
struct test_data_params test_data = {
+ RTE_COMP_OP_STATELESS,
RTE_COMP_OP_STATELESS,
LB_BOTH,
ZLIB_DECOMPRESS,
1, /* run out-of-space test */
+ 0,
+ 0,
0
};
/* Compress with compressdev, decompress with Zlib */
@@ -1945,7 +2084,6 @@ test_compressdev_out_of_space_buffer(void)
ret = TEST_SUCCESS;
exit:
- rte_free(compress_xform);
return ret;
}
@@ -1985,11 +2123,14 @@ test_compressdev_deflate_stateless_dynamic_big(void)
};
struct test_data_params test_data = {
+ RTE_COMP_OP_STATELESS,
RTE_COMP_OP_STATELESS,
SGL_BOTH,
ZLIB_DECOMPRESS,
0,
- 1
+ 1,
+ 0,
+ 0
};
ts_params->def_comp_xform->compress.deflate.huffman =
@@ -2022,6 +2163,199 @@ test_compressdev_deflate_stateless_dynamic_big(void)
return ret;
}
+static int
+test_compressdev_deflate_stateful_decomp(void)
+{
+ struct comp_testsuite_params *ts_params = &testsuite_params;
+ int ret;
+ uint16_t i;
+ const struct rte_compressdev_capabilities *capab;
+
+ capab = rte_compressdev_capability_get(0, RTE_COMP_ALGO_DEFLATE);
+ TEST_ASSERT(capab != NULL, "Failed to retrieve device capabilities");
+
+ if (!(capab->comp_feature_flags & RTE_COMP_FF_STATEFUL_DECOMPRESSION))
+ return -ENOTSUP;
+
+ struct interim_data_params int_data = {
+ &compress_test_bufs[0],
+ 1,
+ &i,
+ &ts_params->def_comp_xform,
+ &ts_params->def_decomp_xform,
+ 1
+ };
+
+ struct test_data_params test_data = {
+ RTE_COMP_OP_STATELESS,
+ RTE_COMP_OP_STATEFUL,
+ LB_BOTH,
+ ZLIB_COMPRESS,
+ 0,
+ 0,
+ 2000,
+ 4
+ };
+
+ /* Compress with Zlib, decompress with compressdev */
+ if (test_deflate_comp_decomp(&int_data, &test_data) < 0) {
+ ret = TEST_FAILED;
+ goto exit;
+ }
+
+ if (capab->comp_feature_flags & RTE_COMP_FF_OOP_SGL_IN_SGL_OUT) {
+ /* Now test with SGL buffers */
+ test_data.buff_type = SGL_BOTH;
+ if (test_deflate_comp_decomp(&int_data, &test_data) < 0) {
+ ret = TEST_FAILED;
+ goto exit;
+ }
+ }
+
+ ret = TEST_SUCCESS;
+
+exit:
+ return ret;
+}
+
+static int
+test_compressdev_deflate_stateful_decomp_checksum(void)
+{
+ struct comp_testsuite_params *ts_params = &testsuite_params;
+ int ret;
+ uint16_t i;
+ const struct rte_compressdev_capabilities *capab;
+
+ capab = rte_compressdev_capability_get(0, RTE_COMP_ALGO_DEFLATE);
+ TEST_ASSERT(capab != NULL, "Failed to retrieve device capabilities");
+
+ if (!(capab->comp_feature_flags & RTE_COMP_FF_STATEFUL_DECOMPRESSION))
+ return -ENOTSUP;
+
+ /* Check if driver supports any checksum */
+ if (!(capab->comp_feature_flags &
+ (RTE_COMP_FF_CRC32_CHECKSUM | RTE_COMP_FF_ADLER32_CHECKSUM |
+ RTE_COMP_FF_CRC32_ADLER32_CHECKSUM)))
+ return -ENOTSUP;
+
+ struct rte_comp_xform *compress_xform =
+ rte_malloc(NULL, sizeof(struct rte_comp_xform), 0);
+ if (compress_xform == NULL) {
+ RTE_LOG(ERR, USER1, "Compress xform could not be created\n");
+ return TEST_FAILED;
+ }
+
+ memcpy(compress_xform, ts_params->def_comp_xform,
+ sizeof(struct rte_comp_xform));
+
+ struct rte_comp_xform *decompress_xform =
+ rte_malloc(NULL, sizeof(struct rte_comp_xform), 0);
+ if (decompress_xform == NULL) {
+ RTE_LOG(ERR, USER1, "Decompress xform could not be created\n");
+ rte_free(compress_xform);
+ return TEST_FAILED;
+ }
+
+ memcpy(decompress_xform, ts_params->def_decomp_xform,
+ sizeof(struct rte_comp_xform));
+
+ struct interim_data_params int_data = {
+ &compress_test_bufs[0],
+ 1,
+ &i,
+ &compress_xform,
+ &decompress_xform,
+ 1
+ };
+
+ struct test_data_params test_data = {
+ RTE_COMP_OP_STATELESS,
+ RTE_COMP_OP_STATEFUL,
+ LB_BOTH,
+ ZLIB_COMPRESS,
+ 0,
+ 0,
+ 2000,
+ 4
+ };
+
+ /* Check if driver supports crc32 checksum and test */
+ if (capab->comp_feature_flags & RTE_COMP_FF_CRC32_CHECKSUM) {
+ compress_xform->compress.chksum = RTE_COMP_CHECKSUM_CRC32;
+ decompress_xform->decompress.chksum = RTE_COMP_CHECKSUM_CRC32;
+ /* Compress with Zlib, decompress with compressdev */
+ test_data.buff_type = LB_BOTH;
+ if (test_deflate_comp_decomp(&int_data, &test_data) < 0) {
+ ret = TEST_FAILED;
+ goto exit;
+ }
+ if (capab->comp_feature_flags &
+ RTE_COMP_FF_OOP_SGL_IN_SGL_OUT) {
+ /* Now test with SGL buffers */
+ test_data.buff_type = SGL_BOTH;
+ if (test_deflate_comp_decomp(&int_data,
+ &test_data) < 0) {
+ ret = TEST_FAILED;
+ goto exit;
+ }
+ }
+ }
+
+ /* Check if driver supports adler32 checksum and test */
+ if (capab->comp_feature_flags & RTE_COMP_FF_ADLER32_CHECKSUM) {
+ compress_xform->compress.chksum = RTE_COMP_CHECKSUM_ADLER32;
+ decompress_xform->decompress.chksum = RTE_COMP_CHECKSUM_ADLER32;
+ /* Compress with Zlib, decompress with compressdev */
+ test_data.buff_type = LB_BOTH;
+ if (test_deflate_comp_decomp(&int_data, &test_data) < 0) {
+ ret = TEST_FAILED;
+ goto exit;
+ }
+ if (capab->comp_feature_flags &
+ RTE_COMP_FF_OOP_SGL_IN_SGL_OUT) {
+ /* Now test with SGL buffers */
+ test_data.buff_type = SGL_BOTH;
+ if (test_deflate_comp_decomp(&int_data,
+ &test_data) < 0) {
+ ret = TEST_FAILED;
+ goto exit;
+ }
+ }
+ }
+
+ /* Check if driver supports combined crc and adler checksum and test */
+ if (capab->comp_feature_flags & RTE_COMP_FF_CRC32_ADLER32_CHECKSUM) {
+ compress_xform->compress.chksum =
+ RTE_COMP_CHECKSUM_CRC32_ADLER32;
+ decompress_xform->decompress.chksum =
+ RTE_COMP_CHECKSUM_CRC32_ADLER32;
+ /* Zlib doesn't support combined checksum */
+ test_data.zlib_dir = ZLIB_NONE;
+ /* Compress stateless, decompress stateful with compressdev */
+ test_data.buff_type = LB_BOTH;
+ if (test_deflate_comp_decomp(&int_data, &test_data) < 0) {
+ ret = TEST_FAILED;
+ goto exit;
+ }
+ if (capab->comp_feature_flags &
+ RTE_COMP_FF_OOP_SGL_IN_SGL_OUT) {
+ /* Now test with SGL buffers */
+ test_data.buff_type = SGL_BOTH;
+ if (test_deflate_comp_decomp(&int_data,
+ &test_data) < 0) {
+ ret = TEST_FAILED;
+ goto exit;
+ }
+ }
+ }
+
+ ret = TEST_SUCCESS;
+
+exit:
+ rte_free(compress_xform);
+ rte_free(decompress_xform);
+ return ret;
+}
static struct unit_test_suite compressdev_testsuite = {
.suite_name = "compressdev unit test suite",
@@ -2048,6 +2382,10 @@ static struct unit_test_suite compressdev_testsuite = {
test_compressdev_deflate_stateless_checksum),
TEST_CASE_ST(generic_ut_setup, generic_ut_teardown,
test_compressdev_out_of_space_buffer),
+ TEST_CASE_ST(generic_ut_setup, generic_ut_teardown,
+ test_compressdev_deflate_stateful_decomp),
+ TEST_CASE_ST(generic_ut_setup, generic_ut_teardown,
+ test_compressdev_deflate_stateful_decomp_checksum),
TEST_CASES_END() /**< NULL terminate unit test array */
}
};
--
2.17.1
next prev parent reply other threads:[~2019-09-02 14:30 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-26 7:44 [dpdk-dev] [PATCH 1/4] common/qat: add QAT RAM bank definitions Adam Dybkowski
2019-08-26 7:44 ` [dpdk-dev] [PATCH 2/4] compress/qat: add stateful decompression Adam Dybkowski
2019-09-20 10:09 ` Trahe, Fiona
2019-08-26 7:45 ` Adam Dybkowski [this message]
2019-08-26 7:45 ` [dpdk-dev] [PATCH 4/4] doc/guides: add stateful feature in QAT Adam Dybkowski
2019-09-19 13:34 ` Akhil Goyal
2019-09-19 13:38 ` Akhil Goyal
2019-09-20 12:44 ` [dpdk-dev] [PATCH v2 0/3] compress/qat: add stateful decompression Adam Dybkowski
2019-09-20 12:44 ` [dpdk-dev] [PATCH v2 1/3] common/qat: add QAT RAM bank definitions Adam Dybkowski
2019-09-20 20:06 ` [dpdk-dev] [PATCH v3 0/3] compress/qat: add stateful decompression Adam Dybkowski
2019-09-20 20:06 ` [dpdk-dev] [PATCH v3 1/3] common/qat: add QAT RAM bank definitions Adam Dybkowski
2019-09-24 11:16 ` Trahe, Fiona
2019-09-20 20:06 ` [dpdk-dev] [PATCH v3 2/3] compress/qat: add stateful decompression Adam Dybkowski
2019-09-24 11:17 ` Trahe, Fiona
2019-09-20 20:06 ` [dpdk-dev] [PATCH v3 3/3] test/compress: add stateful decompression tests Adam Dybkowski
2019-09-24 11:18 ` Trahe, Fiona
2019-09-23 15:56 ` [dpdk-dev] [PATCH v3 0/3] compress/qat: add stateful decompression Trahe, Fiona
2019-09-27 14:42 ` Akhil Goyal
2019-09-20 12:44 ` [dpdk-dev] [PATCH v2 2/3] " Adam Dybkowski
2019-09-23 9:46 ` Trahe, Fiona
2019-09-20 12:44 ` [dpdk-dev] [PATCH v2 3/3] test/compress: add stateful decompression tests Adam Dybkowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190826074501.10653-3-adamx.dybkowski@intel.com \
--to=adamx.dybkowski@intel.com \
--cc=akhil.goyal@nxp.com \
--cc=arturx.trybula@intel.com \
--cc=dev@dpdk.org \
--cc=fiona.trahe@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).