From: Gagandeep Singh <g.singh@nxp.com>
To: dev@dpdk.org, ferruh.yigit@intel.com
Cc: thomas@monjalon.net, Gagandeep Singh <g.singh@nxp.com>
Subject: [dpdk-dev] [PATCH v1 04/13] net/ppfe: support dynamic logging
Date: Mon, 26 Aug 2019 18:32:37 +0530 [thread overview]
Message-ID: <20190826130246.30485-5-g.singh@nxp.com> (raw)
In-Reply-To: <20190826130246.30485-1-g.singh@nxp.com>
This patch introduces logging for the ppfe PMD.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
---
drivers/net/ppfe/pfe_logs.h | 30 ++++++++++++++++
drivers/net/ppfe/ppfe_ethdev.c | 65 +++++++++++++++++++++++++++-------
2 files changed, 82 insertions(+), 13 deletions(-)
create mode 100644 drivers/net/ppfe/pfe_logs.h
diff --git a/drivers/net/ppfe/pfe_logs.h b/drivers/net/ppfe/pfe_logs.h
new file mode 100644
index 000000000..8b34e8d1e
--- /dev/null
+++ b/drivers/net/ppfe/pfe_logs.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2019 NXP
+ */
+
+#ifndef _PFE_LOGS_H_
+#define _PFE_LOGS_H_
+
+/* PMD related logs */
+
+#define PFE_PMD_LOG(level, fmt, args...) \
+ rte_log(RTE_LOG_ ## level, RTE_LOGTYPE_PMD, "%s(): " fmt "\n",\
+ __func__, ##args)
+
+#define PMD_INIT_FUNC_TRACE() PFE_PMD_LOG(DEBUG, " >>")
+
+#define PFE_PMD_DEBUG(fmt, args...) \
+ PFE_PMD_LOG(DEBUG, fmt, ## args)
+#define PFE_PMD_ERR(fmt, args...) \
+ PFE_PMD_LOG(ERR, fmt, ## args)
+#define PFE_PMD_INFO(fmt, args...) \
+ PFE_PMD_LOG(INFO, fmt, ## args)
+
+#define PFE_PMD_WARN(fmt, args...) \
+ PFE_PMD_LOG(WARNING, fmt, ## args)
+
+/* DP Logs, toggled out at compile time if level lower than current level */
+#define PFE_DP_LOG(level, fmt, args...) \
+ RTE_LOG_DP(level, PMD, fmt, ## args)
+
+#endif /* _PFE_LOGS_H_ */
diff --git a/drivers/net/ppfe/ppfe_ethdev.c b/drivers/net/ppfe/ppfe_ethdev.c
index f31a11b93..09d6ceec3 100644
--- a/drivers/net/ppfe/ppfe_ethdev.c
+++ b/drivers/net/ppfe/ppfe_ethdev.c
@@ -7,6 +7,7 @@
#include <rte_bus_vdev.h>
#include <of.h>
+#include "pfe_logs.h"
#include "pfe_mod.h"
#define PPFE_MAX_MACS 1 /*we can support upto 4 MACs per IF*/
@@ -24,14 +25,18 @@ pfe_soc_version_get(void)
FILE *svr_file = NULL;
unsigned int svr_ver = 0;
+ PMD_INIT_FUNC_TRACE();
+
svr_file = fopen(PFE_SOC_ID_FILE, "r");
- if (!svr_file)
+ if (!svr_file) {
+ PFE_PMD_ERR("Unable to open SoC device");
return; /* Not supported on this infra */
+ }
if (fscanf(svr_file, "svr:%x", &svr_ver) > 0)
pfe_svr = svr_ver;
else
- printf("Unable to read SoC device");
+ PFE_PMD_ERR("Unable to read SoC device");
fclose(svr_file);
}
@@ -46,6 +51,9 @@ pfe_eth_open_cdev(struct pfe_eth_priv_s *priv)
pfe_cdev_fd = open(PFE_CDEV_PATH, O_RDONLY);
if (pfe_cdev_fd < 0) {
+ PFE_PMD_WARN("Unable to open PFE device file (%s).\n",
+ PFE_CDEV_PATH);
+ PFE_PMD_WARN("Link status update will not be available.\n");
priv->link_fd = PFE_CDEV_INVALID_FD;
return -1;
}
@@ -72,6 +80,8 @@ pfe_eth_close_cdev(struct pfe_eth_priv_s *priv)
static void
pfe_eth_exit(struct rte_eth_dev *dev, struct pfe *pfe)
{
+ PMD_INIT_FUNC_TRACE();
+
/* Close the device file for link status */
pfe_eth_close_cdev(dev->data->dev_private);
@@ -88,8 +98,11 @@ static int pfe_eth_init(struct rte_vdev_device *vdev, struct pfe *pfe, int id)
struct pfe_eth_priv_s *priv = NULL;
int err;
- if (id >= pfe->max_intf)
+ if (id >= pfe->max_intf) {
+ PFE_PMD_ERR("Requested intf (gemid) %d not supported Max is %d",
+ id, pfe->max_intf);
return -EINVAL;
+ }
data = rte_zmalloc(NULL, sizeof(*data), 64);
if (data == NULL)
@@ -119,6 +132,8 @@ static int pfe_eth_init(struct rte_vdev_device *vdev, struct pfe *pfe, int id)
eth_dev->data->mac_addrs = rte_zmalloc("mac_addr",
ETHER_ADDR_LEN * PPFE_MAX_MACS, 0);
if (eth_dev->data->mac_addrs == NULL) {
+ PFE_PMD_ERR("Failed to allocate mem %d to store MAC addresses",
+ ETHER_ADDR_LEN * PPFE_MAX_MACS);
err = -ENOMEM;
goto err0;
}
@@ -149,8 +164,10 @@ parse_integer_arg(const char *key __rte_unused,
int *i = (int *)extra_args;
*i = atoi(value);
- if (*i < 0)
+ if (*i < 0) {
+ PFE_PMD_ERR("argument has to be positive.");
return -1;
+ }
return 0;
}
@@ -210,10 +227,15 @@ pmd_pfe_probe(struct rte_vdev_device *vdev)
if (rc < 0)
return -EINVAL;
+ RTE_LOG(INFO, PMD, "Initializing pmd_pfe for %s Given gem-id %d\n",
+ name, init_params.gem_id);
+
if (g_pfe) {
- if (g_pfe->nb_devs >= g_pfe->max_intf)
+ if (g_pfe->nb_devs >= g_pfe->max_intf) {
+ PFE_PMD_ERR("PPFE %d dev already created Max is %d",
+ g_pfe->nb_devs, g_pfe->max_intf);
return -EINVAL;
-
+ }
goto eth_init;
}
@@ -223,31 +245,40 @@ pmd_pfe_probe(struct rte_vdev_device *vdev)
/* Load the device-tree driver */
rc = of_init();
- if (rc)
+ if (rc) {
+ PFE_PMD_ERR("of_init failed with ret: %d", rc);
goto err;
+ }
np = of_find_compatible_node(NULL, NULL, "fsl,pfe");
if (!np) {
+ PFE_PMD_ERR("Invalid device node");
rc = -EINVAL;
goto err;
}
addr = of_get_address(np, 0, &cbus_size, NULL);
- if (!addr)
+ if (!addr) {
+ PFE_PMD_ERR("of_get_address cannot return qman address\n");
goto err;
-
+ }
cbus_addr = of_translate_address(np, addr);
- if (!cbus_addr)
+ if (!cbus_addr) {
+ PFE_PMD_ERR("of_translate_address failed\n");
goto err;
-
+ }
addr = of_get_address(np, 1, &ddr_size, NULL);
- if (!addr)
+ if (!addr) {
+ PFE_PMD_ERR("of_get_address cannot return qman address\n");
goto err;
+ }
g_pfe->ddr_phys_baseaddr = of_translate_address(np, addr);
- if (!g_pfe->ddr_phys_baseaddr)
+ if (!g_pfe->ddr_phys_baseaddr) {
+ PFE_PMD_ERR("of_translate_address failed\n");
goto err;
+ }
g_pfe->ddr_size = ddr_size;
@@ -255,6 +286,7 @@ pmd_pfe_probe(struct rte_vdev_device *vdev)
g_pfe->cbus_baseaddr = mmap(NULL, cbus_size, PROT_READ | PROT_WRITE,
MAP_SHARED, fd, cbus_addr);
if (g_pfe->cbus_baseaddr == MAP_FAILED) {
+ PFE_PMD_ERR("Can not map cbus base");
rc = -EINVAL;
goto err;
}
@@ -262,15 +294,20 @@ pmd_pfe_probe(struct rte_vdev_device *vdev)
/* Read interface count */
prop = of_get_property(np, "fsl,pfe-num-interfaces", &size);
if (!prop) {
+ PFE_PMD_ERR("Failed to read number of interfaces");
rc = -ENXIO;
goto err_prop;
}
interface_count = rte_be_to_cpu_32((unsigned int)*prop);
if (interface_count <= 0) {
+ PFE_PMD_ERR("No ethernet interface count : %d",
+ interface_count);
rc = -ENXIO;
goto err_prop;
}
+ PFE_PMD_INFO("num interfaces = %d ", interface_count);
+
g_pfe->max_intf = interface_count;
pfe_soc_version_get();
eth_init:
@@ -307,6 +344,8 @@ pmd_pfe_remove(struct rte_vdev_device *vdev)
if (name == NULL)
return -EINVAL;
+ PFE_PMD_INFO("Closing eventdev sw device %s", name);
+
if (!g_pfe)
return 0;
--
2.17.1
next prev parent reply other threads:[~2019-08-26 13:17 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-26 13:02 [dpdk-dev] [PATCH v1 00/13] introduces ppfe network PMD Gagandeep Singh
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 01/13] common/dpaax: moving OF lib code from dpaa bus Gagandeep Singh
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 02/13] net/ppfe: introduce ppfe net poll mode driver Gagandeep Singh
2019-10-28 17:18 ` Stephen Hemminger
2019-10-29 9:27 ` Ferruh Yigit
2019-11-04 11:06 ` Bruce Richardson
2019-11-05 16:02 ` Ferruh Yigit
2019-11-06 9:38 ` Bruce Richardson
2019-11-06 12:22 ` Ferruh Yigit
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 03/13] doc: add guide for ppfe net PMD Gagandeep Singh
2019-08-26 13:02 ` Gagandeep Singh [this message]
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 05/13] net/ppfe: add HW specific macros and operations Gagandeep Singh
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 06/13] net/ppfe: add MAC and host interface initialisation Gagandeep Singh
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 07/13] net/ppfe: add device start stop operations Gagandeep Singh
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 08/13] net/ppfe: add queue setup and release operations Gagandeep Singh
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 09/13] net/ppfe: add burst enqueue and dequeue operations Gagandeep Singh
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 10/13] net/ppfe: add supported packet types and basic statistics Gagandeep Singh
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 11/13] net/ppfe: add MTU and MAC address set operations Gagandeep Singh
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 12/13] net/ppfe: add allmulticast and promiscuous Gagandeep Singh
2019-08-26 13:02 ` [dpdk-dev] [PATCH v1 13/13] net/ppfe: add link status update Gagandeep Singh
2019-08-27 7:16 ` [dpdk-dev] [PATCH v1 00/13] introduces ppfe network PMD Gagandeep Singh
2019-08-28 11:08 ` [dpdk-dev] [PATCH v2 " Gagandeep Singh
2019-08-28 11:08 ` [dpdk-dev] [PATCH v2 01/13] common/dpaax: moving OF lib code from dpaa bus Gagandeep Singh
2019-09-26 16:54 ` Ferruh Yigit
2019-08-28 11:08 ` [dpdk-dev] [PATCH v2 02/13] net/ppfe: introduce ppfe net poll mode driver Gagandeep Singh
2019-09-26 16:53 ` Ferruh Yigit
2019-10-01 7:05 ` Gagandeep Singh
2019-08-28 11:08 ` [dpdk-dev] [PATCH v2 03/13] doc: add guide for ppfe net PMD Gagandeep Singh
2019-09-26 16:56 ` Ferruh Yigit
2019-09-26 18:00 ` Ferruh Yigit
2019-08-28 11:08 ` [dpdk-dev] [PATCH v2 04/13] net/ppfe: support dynamic logging Gagandeep Singh
2019-09-26 16:57 ` Ferruh Yigit
2019-08-28 11:08 ` [dpdk-dev] [PATCH v2 05/13] net/ppfe: add HW specific macros and operations Gagandeep Singh
2019-08-28 11:08 ` [dpdk-dev] [PATCH v2 06/13] net/ppfe: add MAC and host interface initialisation Gagandeep Singh
2019-09-26 17:00 ` Ferruh Yigit
2019-08-28 11:08 ` [dpdk-dev] [PATCH v2 07/13] net/ppfe: add device start stop operations Gagandeep Singh
2019-08-28 11:08 ` [dpdk-dev] [PATCH v2 08/13] net/ppfe: add queue setup and release operations Gagandeep Singh
2019-08-28 11:08 ` [dpdk-dev] [PATCH v2 09/13] net/ppfe: add burst enqueue and dequeue operations Gagandeep Singh
2019-08-28 11:08 ` [dpdk-dev] [PATCH v2 10/13] net/ppfe: add supported packet types and basic statistics Gagandeep Singh
2019-08-28 11:08 ` [dpdk-dev] [PATCH v2 11/13] net/ppfe: add MTU and MAC address set operations Gagandeep Singh
2019-08-28 11:08 ` [dpdk-dev] [PATCH v2 12/13] net/ppfe: add allmulticast and promiscuous Gagandeep Singh
2019-08-28 11:08 ` [dpdk-dev] [PATCH v2 13/13] net/ppfe: add link status update Gagandeep Singh
2019-09-26 17:28 ` [dpdk-dev] [PATCH v2 00/13] introduces ppfe network PMD Ferruh Yigit
2019-09-27 14:55 ` Gagandeep Singh
2019-10-01 11:01 ` [dpdk-dev] [PATCH v3 00/14] " Gagandeep Singh
2019-10-01 11:01 ` [dpdk-dev] [PATCH v3 01/14] common/dpaax: moving OF lib code from dpaa bus Gagandeep Singh
2019-10-01 11:01 ` [dpdk-dev] [PATCH v3 02/14] net/ppfe: introduce ppfe net poll mode driver Gagandeep Singh
2019-10-04 15:38 ` Ferruh Yigit
2019-10-09 6:52 ` Gagandeep Singh
2019-10-01 11:01 ` [dpdk-dev] [PATCH v3 03/14] doc: add guide for ppfe net PMD Gagandeep Singh
2019-10-04 15:41 ` Ferruh Yigit
2019-10-09 6:54 ` Gagandeep Singh
2019-10-01 11:01 ` [dpdk-dev] [PATCH v3 04/14] net/ppfe: support dynamic logging Gagandeep Singh
2019-10-01 11:02 ` [dpdk-dev] [PATCH v3 05/14] net/ppfe: add HW specific macros and operations Gagandeep Singh
2019-10-01 11:02 ` [dpdk-dev] [PATCH v3 06/14] net/ppfe: add MAC and host interface initialisation Gagandeep Singh
2019-10-01 11:02 ` [dpdk-dev] [PATCH v3 07/14] net/ppfe: add device start stop operations Gagandeep Singh
2019-10-04 15:42 ` Ferruh Yigit
2019-10-09 6:54 ` Gagandeep Singh
2019-10-01 11:02 ` [dpdk-dev] [PATCH v3 08/14] net/ppfe: add queue setup and release operations Gagandeep Singh
2019-10-01 11:02 ` [dpdk-dev] [PATCH v3 09/14] net/ppfe: add burst enqueue and dequeue operations Gagandeep Singh
2019-10-01 11:02 ` [dpdk-dev] [PATCH v3 10/14] net/ppfe: add supported packet types and basic statistics Gagandeep Singh
2019-10-01 11:02 ` [dpdk-dev] [PATCH v3 11/14] net/ppfe: add MTU and MAC address set operations Gagandeep Singh
2019-10-01 11:02 ` [dpdk-dev] [PATCH v3 12/14] net/ppfe: add allmulticast and promiscuous Gagandeep Singh
2019-10-01 11:02 ` [dpdk-dev] [PATCH v3 13/14] net/ppfe: add link status update Gagandeep Singh
2019-10-04 15:43 ` Ferruh Yigit
2019-10-09 6:57 ` Gagandeep Singh
2019-10-01 11:02 ` [dpdk-dev] [PATCH v3 14/14] doc: add NXP PPFE PMD in release notes Gagandeep Singh
2019-10-10 6:32 ` [dpdk-dev] [PATCH v4 00/14] introduces pfe network PMD Gagandeep Singh
2019-10-10 6:32 ` [dpdk-dev] [PATCH v4 01/14] common/dpaax: moving OF lib code from dpaa bus Gagandeep Singh
2019-10-10 17:01 ` Ferruh Yigit
2019-10-10 6:32 ` [dpdk-dev] [PATCH v4 02/14] net/pfe: introduce pfe net poll mode driver Gagandeep Singh
2019-10-10 6:32 ` [dpdk-dev] [PATCH v4 03/14] doc: add guide for pfe net PMD Gagandeep Singh
2019-10-10 6:32 ` [dpdk-dev] [PATCH v4 04/14] net/pfe: support dynamic logging Gagandeep Singh
2019-10-10 6:32 ` [dpdk-dev] [PATCH v4 05/14] net/pfe: add HW specific macros and operations Gagandeep Singh
2019-10-10 6:32 ` [dpdk-dev] [PATCH v4 06/14] net/pfe: add MAC and host interface initialisation Gagandeep Singh
2019-10-10 6:32 ` [dpdk-dev] [PATCH v4 07/14] net/pfe: add device start stop operations Gagandeep Singh
2019-10-10 6:32 ` [dpdk-dev] [PATCH v4 08/14] net/pfe: add queue setup and release operations Gagandeep Singh
2019-10-10 6:32 ` [dpdk-dev] [PATCH v4 09/14] net/pfe: add burst enqueue and dequeue operations Gagandeep Singh
2019-10-10 6:32 ` [dpdk-dev] [PATCH v4 10/14] net/pfe: add supported packet types and basic statistics Gagandeep Singh
2019-10-10 6:32 ` [dpdk-dev] [PATCH v4 11/14] net/pfe: add MTU and MAC address set operations Gagandeep Singh
2019-10-10 6:32 ` [dpdk-dev] [PATCH v4 12/14] net/pfe: add allmulticast and promiscuous Gagandeep Singh
2019-10-10 6:32 ` [dpdk-dev] [PATCH v4 13/14] net/pfe: add link status update Gagandeep Singh
2019-10-10 6:32 ` [dpdk-dev] [PATCH v4 14/14] doc: add NXP PFE PMD in release notes Gagandeep Singh
2019-10-10 7:11 ` [dpdk-dev] [PATCH v4 00/14] introduces pfe network PMD Thomas Monjalon
2019-10-10 17:01 ` Ferruh Yigit
2019-10-10 17:47 ` Ferruh Yigit
2019-10-25 7:59 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190826130246.30485-5-g.singh@nxp.com \
--to=g.singh@nxp.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).