[dpdk-dev] [PATCH 10/20] crypto/dpaa2_sec: disable 'write-safe' for PDCP

[Akhil Goyal <akhil.goyal@nxp.com>]

From: Vakul Garg <vakul.garg@nxp.com>

PDCP descriptors in some cases internally use commands which overwrite
memory with extra '0s' if write-safe is kept enabled. This breaks
correct functional behavior of PDCP apis and they in many cases give
incorrect crypto output. There we disable 'write-safe' bit in FLC for
PDCP cases. If there is a performance drop, then write-safe would be
enabled selectively through a separate patch.

Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
---
 drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
index cbc7dff04..c9029e989 100644
--- a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
@@ -2899,8 +2899,12 @@ dpaa2_sec_set_pdcp_session(struct rte_cryptodev *dev,
 
 	flc->word1_sdl = (uint8_t)bufsize;
 
-	/* Set EWS bit i.e. enable write-safe */
-	DPAA2_SET_FLC_EWS(flc);
+	/* TODO - check the perf impact or
+	 * align as per descriptor type
+	 * Set EWS bit i.e. enable write-safe
+	 * DPAA2_SET_FLC_EWS(flc);
+	 */
+
 	/* Set BS = 1 i.e reuse input buffers as output buffers */
 	DPAA2_SET_FLC_REUSE_BS(flc);
 	/* Set FF = 10; reuse input buffers if they provide sufficient space */
-- 
2.17.1