From: Shahed Shaikh <shshaikh@marvell.com>
To: <dev@dpdk.org>
Cc: <rmody@marvell.com>, <jerinj@marvell.com>,
<GR-Everest-DPDK-Dev@marvell.com>
Subject: [dpdk-dev] [PATCH v1 5/5] net/qede: implement rte_flow drop action
Date: Fri, 6 Sep 2019 00:32:17 -0700 [thread overview]
Message-ID: <20190906073217.13873-6-shshaikh@marvell.com> (raw)
In-Reply-To: <20190906073217.13873-1-shshaikh@marvell.com>
Add support to configure drop action in rte_flow
infrastructure and add counter for dropped
packets due to this filter action "rx_gft_filter_drop".
Also, update supported flows and actions in qede guide.
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
---
doc/guides/nics/qede.rst | 39 +++++++++++++++++++++
drivers/net/qede/base/ecore_dev_api.h | 1 +
drivers/net/qede/base/ecore_l2.c | 50 +++++++++++++++------------
drivers/net/qede/base/ecore_l2_api.h | 39 ++++++++++++++-------
drivers/net/qede/qede_ethdev.c | 2 ++
drivers/net/qede/qede_ethdev.h | 1 +
drivers/net/qede/qede_filter.c | 22 ++++++++----
7 files changed, 114 insertions(+), 40 deletions(-)
diff --git a/doc/guides/nics/qede.rst b/doc/guides/nics/qede.rst
index 05a6aef57..471d98014 100644
--- a/doc/guides/nics/qede.rst
+++ b/doc/guides/nics/qede.rst
@@ -39,6 +39,7 @@ Supported Features
- GENEVE Tunneling offload
- VXLAN Tunneling offload
- MPLSoUDP Tx Tunneling offload
+- Generic flow API
Non-supported Features
----------------------
@@ -137,6 +138,44 @@ Driver compilation and testing
Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
for details.
+RTE Flow Support
+----------------
+
+QLogic FastLinQ QL4xxxx NICs has support for the following patterns and
+actions.
+
+Patterns:
+
+.. _table_qede_supported_flow_item_types:
+
+.. table:: Item types
+
+ +----+--------------------------------+
+ | # | Pattern Type |
+ +====+================================+
+ | 1 | RTE_FLOW_ITEM_TYPE_IPV4 |
+ +----+--------------------------------+
+ | 2 | RTE_FLOW_ITEM_TYPE_IPV6 |
+ +----+--------------------------------+
+ | 3 | RTE_FLOW_ITEM_TYPE_UDP |
+ +----+--------------------------------+
+ | 4 | RTE_FLOW_ITEM_TYPE_TCP |
+ +----+--------------------------------+
+
+Actions:
+
+.. _table_qede_supported_ingress_action_types:
+
+.. table:: Ingress action types
+
+ +----+--------------------------------+
+ | # | Action Type |
+ +====+================================+
+ | 1 | RTE_FLOW_ACTION_TYPE_QUEUE |
+ +----+--------------------------------+
+ | 2 | RTE_FLOW_ACTION_TYPE_DROP |
+ +----+--------------------------------+
+
SR-IOV: Prerequisites and Sample Application Notes
--------------------------------------------------
diff --git a/drivers/net/qede/base/ecore_dev_api.h b/drivers/net/qede/base/ecore_dev_api.h
index 730806321..a99888097 100644
--- a/drivers/net/qede/base/ecore_dev_api.h
+++ b/drivers/net/qede/base/ecore_dev_api.h
@@ -334,6 +334,7 @@ struct ecore_eth_stats_common {
u64 rx_bcast_pkts;
u64 mftag_filter_discards;
u64 mac_filter_discards;
+ u64 gft_filter_drop;
u64 tx_ucast_bytes;
u64 tx_mcast_bytes;
u64 tx_bcast_bytes;
diff --git a/drivers/net/qede/base/ecore_l2.c b/drivers/net/qede/base/ecore_l2.c
index 8b9817eb2..5dcdc84fc 100644
--- a/drivers/net/qede/base/ecore_l2.c
+++ b/drivers/net/qede/base/ecore_l2.c
@@ -1782,6 +1782,8 @@ static void __ecore_get_vport_tstats(struct ecore_hwfn *p_hwfn,
HILO_64_REGPAIR(tstats.mftag_filter_discard);
p_stats->common.mac_filter_discards +=
HILO_64_REGPAIR(tstats.eth_mac_filter_discard);
+ p_stats->common.gft_filter_drop +=
+ HILO_64_REGPAIR(tstats.eth_gft_drop_pkt);
}
static void __ecore_get_vport_ustats_addrlen(struct ecore_hwfn *p_hwfn,
@@ -2140,9 +2142,7 @@ void ecore_arfs_mode_configure(struct ecore_hwfn *p_hwfn,
enum _ecore_status_t
ecore_configure_rfs_ntuple_filter(struct ecore_hwfn *p_hwfn,
struct ecore_spq_comp_cb *p_cb,
- dma_addr_t p_addr, u16 length,
- u16 qid, u8 vport_id,
- bool b_is_add)
+ struct ecore_ntuple_filter_params *p_params)
{
struct rx_update_gft_filter_data *p_ramrod = OSAL_NULL;
struct ecore_spq_entry *p_ent = OSAL_NULL;
@@ -2151,14 +2151,6 @@ ecore_configure_rfs_ntuple_filter(struct ecore_hwfn *p_hwfn,
u8 abs_vport_id = 0;
enum _ecore_status_t rc = ECORE_NOTIMPL;
- rc = ecore_fw_vport(p_hwfn, vport_id, &abs_vport_id);
- if (rc != ECORE_SUCCESS)
- return rc;
-
- rc = ecore_fw_l2_queue(p_hwfn, qid, &abs_rx_q_id);
- if (rc != ECORE_SUCCESS)
- return rc;
-
/* Get SPQ entry */
OSAL_MEMSET(&init_data, 0, sizeof(init_data));
init_data.cid = ecore_spq_get_cid(p_hwfn);
@@ -2180,27 +2172,41 @@ ecore_configure_rfs_ntuple_filter(struct ecore_hwfn *p_hwfn,
p_ramrod = &p_ent->ramrod.rx_update_gft;
- DMA_REGPAIR_LE(p_ramrod->pkt_hdr_addr, p_addr);
- p_ramrod->pkt_hdr_length = OSAL_CPU_TO_LE16(length);
+ DMA_REGPAIR_LE(p_ramrod->pkt_hdr_addr, p_params->addr);
+ p_ramrod->pkt_hdr_length = OSAL_CPU_TO_LE16(p_params->length);
- p_ramrod->action_icid_valid = 0;
- p_ramrod->action_icid = 0;
+ if (p_params->b_is_drop) {
+ p_ramrod->vport_id = OSAL_CPU_TO_LE16(ETH_GFT_TRASHCAN_VPORT);
+ } else {
+ rc = ecore_fw_vport(p_hwfn, p_params->vport_id,
+ &abs_vport_id);
+ if (rc)
+ return rc;
+
+ if (p_params->qid != ECORE_RFS_NTUPLE_QID_RSS) {
+ rc = ecore_fw_l2_queue(p_hwfn, p_params->qid,
+ &abs_rx_q_id);
+ if (rc)
+ return rc;
- p_ramrod->rx_qid_valid = 1;
- p_ramrod->rx_qid = OSAL_CPU_TO_LE16(abs_rx_q_id);
+ p_ramrod->rx_qid_valid = 1;
+ p_ramrod->rx_qid = OSAL_CPU_TO_LE16(abs_rx_q_id);
+ }
+
+ p_ramrod->vport_id = OSAL_CPU_TO_LE16((u16)abs_vport_id);
+ }
p_ramrod->flow_id_valid = 0;
p_ramrod->flow_id = 0;
- p_ramrod->vport_id = OSAL_CPU_TO_LE16((u16)abs_vport_id);
- p_ramrod->filter_action = b_is_add ? GFT_ADD_FILTER
- : GFT_DELETE_FILTER;
+ p_ramrod->filter_action = p_params->b_is_add ? GFT_ADD_FILTER
+ : GFT_DELETE_FILTER;
DP_VERBOSE(p_hwfn, ECORE_MSG_SP,
"V[%0x], Q[%04x] - %s filter from 0x%lx [length %04xb]\n",
abs_vport_id, abs_rx_q_id,
- b_is_add ? "Adding" : "Removing",
- (unsigned long)p_addr, length);
+ p_params->b_is_add ? "Adding" : "Removing",
+ (unsigned long)p_params->addr, p_params->length);
return ecore_spq_post(p_hwfn, p_ent, OSAL_NULL);
}
diff --git a/drivers/net/qede/base/ecore_l2_api.h b/drivers/net/qede/base/ecore_l2_api.h
index 004fb61ba..acde81fad 100644
--- a/drivers/net/qede/base/ecore_l2_api.h
+++ b/drivers/net/qede/base/ecore_l2_api.h
@@ -448,6 +448,31 @@ void ecore_arfs_mode_configure(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt,
struct ecore_arfs_config_params *p_cfg_params);
+struct ecore_ntuple_filter_params {
+ /* Physically mapped address containing header of buffer to be used
+ * as filter.
+ */
+ dma_addr_t addr;
+
+ /* Length of header in bytes */
+ u16 length;
+
+ /* Relative queue-id to receive classified packet */
+ #define ECORE_RFS_NTUPLE_QID_RSS ((u16)-1)
+ u16 qid;
+
+ /* Identifier can either be according to vport-id or vfid */
+ bool b_is_vf;
+ u8 vport_id;
+ u8 vf_id;
+
+ /* true if this filter is to be added. Else to be removed */
+ bool b_is_add;
+
+ /* If packet needs to be dropped */
+ bool b_is_drop;
+};
+
/**
* @brief - ecore_configure_rfs_ntuple_filter
*
@@ -457,22 +482,12 @@ void ecore_arfs_mode_configure(struct ecore_hwfn *p_hwfn,
* @params p_cb Used for ECORE_SPQ_MODE_CB,where client would initialize
* it with cookie and callback function address, if not
* using this mode then client must pass NULL.
- * @params p_addr p_addr is an actual packet header that needs to be
- * filter. It has to mapped with IO to read prior to
- * calling this, [contains 4 tuples- src ip, dest ip,
- * src port, dest port].
- * @params length length of p_addr header up to past the transport header.
- * @params qid receive packet will be directed to this queue.
- * @params vport_id
- * @params b_is_add flag to add or remove filter.
- *
+ * @params p_params
*/
enum _ecore_status_t
ecore_configure_rfs_ntuple_filter(struct ecore_hwfn *p_hwfn,
struct ecore_spq_comp_cb *p_cb,
- dma_addr_t p_addr, u16 length,
- u16 qid, u8 vport_id,
- bool b_is_add);
+ struct ecore_ntuple_filter_params *p_params);
/**
* @brief - ecore_update_eth_rss_ind_table_entry
diff --git a/drivers/net/qede/qede_ethdev.c b/drivers/net/qede/qede_ethdev.c
index 98290fdc7..8064735db 100644
--- a/drivers/net/qede/qede_ethdev.c
+++ b/drivers/net/qede/qede_ethdev.c
@@ -125,6 +125,8 @@ static const struct rte_qede_xstats_name_off qede_xstats_strings[] = {
offsetof(struct ecore_eth_stats_common, mftag_filter_discards)},
{"rx_mac_filter_discards",
offsetof(struct ecore_eth_stats_common, mac_filter_discards)},
+ {"rx_gft_filter_drop",
+ offsetof(struct ecore_eth_stats_common, gft_filter_drop)},
{"rx_hw_buffer_truncates",
offsetof(struct ecore_eth_stats_common, brb_truncates)},
{"rx_hw_buffer_discards",
diff --git a/drivers/net/qede/qede_ethdev.h b/drivers/net/qede/qede_ethdev.h
index 5549d0bf3..b5f93e9fa 100644
--- a/drivers/net/qede/qede_ethdev.h
+++ b/drivers/net/qede/qede_ethdev.h
@@ -179,6 +179,7 @@ struct qede_arfs_entry {
uint32_t soft_id; /* unused for now */
uint16_t pkt_len; /* actual packet length to match */
uint16_t rx_queue; /* queue to be steered to */
+ bool is_drop; /* drop action */
const struct rte_memzone *mz; /* mz used to hold L2 frame */
struct qede_arfs_tuple tuple;
SLIST_ENTRY(qede_arfs_entry) list;
diff --git a/drivers/net/qede/qede_filter.c b/drivers/net/qede/qede_filter.c
index 81509f04b..b7ad59ad6 100644
--- a/drivers/net/qede/qede_filter.c
+++ b/drivers/net/qede/qede_filter.c
@@ -272,6 +272,7 @@ qede_config_arfs_filter(struct rte_eth_dev *eth_dev,
{
struct qede_dev *qdev = QEDE_INIT_QDEV(eth_dev);
struct ecore_dev *edev = QEDE_INIT_EDEV(qdev);
+ struct ecore_ntuple_filter_params params;
char mz_name[RTE_MEMZONE_NAMESIZE] = {0};
struct qede_arfs_entry *tmp = NULL;
const struct rte_memzone *mz;
@@ -344,12 +345,18 @@ qede_config_arfs_filter(struct rte_eth_dev *eth_dev,
ecore_arfs_mode_configure(p_hwfn, p_hwfn->p_arfs_ptt,
&qdev->arfs_info.arfs);
}
+
+ memset(¶ms, 0, sizeof(params));
+ params.addr = (dma_addr_t)mz->iova;
+ params.length = pkt_len;
+ params.qid = arfs->rx_queue;
+ params.vport_id = 0;
+ params.b_is_add = add;
+ params.b_is_drop = arfs->is_drop;
+
/* configure filter with ECORE_SPQ_MODE_EBLOCK */
rc = ecore_configure_rfs_ntuple_filter(p_hwfn, NULL,
- (dma_addr_t)mz->iova,
- pkt_len,
- arfs->rx_queue,
- 0, add);
+ ¶ms);
if (rc == ECORE_SUCCESS) {
if (add) {
arfs->pkt_len = pkt_len;
@@ -1371,12 +1378,15 @@ qede_flow_parse_actions(struct rte_eth_dev *dev,
flow->entry.rx_queue = queue->index;
break;
-
+ case RTE_FLOW_ACTION_TYPE_DROP:
+ if (flow)
+ flow->entry.is_drop = true;
+ break;
default:
rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ACTION,
actions,
- "Action is not supported - only ACTION_TYPE_QUEUE supported");
+ "Action is not supported - only ACTION_TYPE_QUEUE and ACTION_TYPE_DROP supported");
return -rte_errno;
}
}
--
2.17.1
prev parent reply other threads:[~2019-09-06 7:41 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-06 7:32 [dpdk-dev] [PATCH v1 0/5] net/qede: fixes and enhancement Shahed Shaikh
2019-09-06 7:32 ` [dpdk-dev] [PATCH v1 1/5] net/qede: refactor Rx and Tx queue setup Shahed Shaikh
2019-09-12 12:34 ` Jerin Jacob
2019-09-12 14:48 ` Shahed Shaikh
2019-09-06 7:32 ` [dpdk-dev] [PATCH v1 2/5] net/qede: fix ovs-dpdk failure when using odd number of queues on 100Gb mode Shahed Shaikh
2019-09-06 7:32 ` [dpdk-dev] [PATCH v1 3/5] net/qede: fix RSS configuration as per new 100Gb queue allocation method Shahed Shaikh
2019-09-06 7:32 ` [dpdk-dev] [PATCH v1 4/5] net/qede: fix stats flow " Shahed Shaikh
2019-09-06 7:32 ` Shahed Shaikh [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190906073217.13873-6-shshaikh@marvell.com \
--to=shshaikh@marvell.com \
--cc=GR-Everest-DPDK-Dev@marvell.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=rmody@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).