DPDK patches and discussions
 help / color / mirror / Atom feed
From: Hyong Youb Kim <hyonkim@cisco.com>
To: Ferruh Yigit <ferruh.yigit@intel.com>
Cc: dev@dpdk.org, John Daley <johndale@cisco.com>,
	Hyong Youb Kim <hyonkim@cisco.com>
Subject: [dpdk-dev] [PATCH 1/2] net/enic: enable Geneve with options offload
Date: Tue, 10 Sep 2019 02:59:36 -0700	[thread overview]
Message-ID: <20190910095937.9731-2-hyonkim@cisco.com> (raw)
In-Reply-To: <20190910095937.9731-1-hyonkim@cisco.com>

Latest firmware supports Geneve with options offload. Current overlay
offload only supports Geneve with no options. This new feature is
disabled by default, as it is intrusive and cannot be used with flow
API. Add a new devarg 'geneve-opt' so the user can explicitly enable
it.

Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
---
 doc/guides/nics/enic.rst               | 12 ++++++++++++
 doc/guides/rel_notes/release_19_11.rst |  4 ++++
 drivers/net/enic/base/vnic_dev.c       | 11 +++++++++++
 drivers/net/enic/base/vnic_dev.h       |  1 +
 drivers/net/enic/base/vnic_devcmd.h    |  7 +++++++
 drivers/net/enic/enic.h                |  3 +++
 drivers/net/enic/enic_ethdev.c         | 15 +++++++++++++++
 drivers/net/enic/enic_main.c           | 22 ++++++++++++++++++++++
 drivers/net/enic/enic_res.c            |  4 ++++
 9 files changed, 79 insertions(+)

diff --git a/doc/guides/nics/enic.rst b/doc/guides/nics/enic.rst
index 5681bdb54..2384cb5b8 100644
--- a/doc/guides/nics/enic.rst
+++ b/doc/guides/nics/enic.rst
@@ -322,6 +322,18 @@ it through ``rte_eth_dev_udp_tunnel_port_{add,delete}``. However, as
 the current NIC has a single VXLAN port number, the user cannot
 configure multiple port numbers.
 
+Geneve headers with non-zero options are not supported by default. To
+use Geneve with options, update the VIC firmware to the latest version
+and then set ``devargs`` parameter ``geneve-opt=1``. When Geneve with
+options is enabled, flow API cannot be used as the features are
+currently mutually exclusive. When this feature is successfully
+enabled, PMD prints the following message.
+
+.. code-block:: console
+
+    Geneve with options is enabled
+
+
 Ingress VLAN Rewrite
 --------------------
 
diff --git a/doc/guides/rel_notes/release_19_11.rst b/doc/guides/rel_notes/release_19_11.rst
index 8490d897c..afe71f8fa 100644
--- a/doc/guides/rel_notes/release_19_11.rst
+++ b/doc/guides/rel_notes/release_19_11.rst
@@ -56,6 +56,10 @@ New Features
      Also, make sure to start the actual text at the margin.
      =========================================================
 
+* **Updated the enic driver.**
+
+  * Added support for Geneve with options offload.
+
 
 Removed Items
 -------------
diff --git a/drivers/net/enic/base/vnic_dev.c b/drivers/net/enic/base/vnic_dev.c
index 8e190687d..807d4096f 100644
--- a/drivers/net/enic/base/vnic_dev.c
+++ b/drivers/net/enic/base/vnic_dev.c
@@ -1120,3 +1120,14 @@ int vnic_dev_capable_vxlan(struct vnic_dev *vdev)
 		(a1 & (FEATURE_VXLAN_IPV6 | FEATURE_VXLAN_MULTI_WQ)) ==
 		(FEATURE_VXLAN_IPV6 | FEATURE_VXLAN_MULTI_WQ);
 }
+
+int vnic_dev_capable_geneve(struct vnic_dev *vdev)
+{
+	u64 a0 = VIC_FEATURE_GENEVE;
+	u64 a1 = 0;
+	int wait = 1000;
+	int ret;
+
+	ret = vnic_dev_cmd(vdev, CMD_GET_SUPP_FEATURE_VER, &a0, &a1, wait);
+	return ret == 0 && (a1 & FEATURE_GENEVE_OPTIONS);
+}
diff --git a/drivers/net/enic/base/vnic_dev.h b/drivers/net/enic/base/vnic_dev.h
index 270a47bd2..8a1363486 100644
--- a/drivers/net/enic/base/vnic_dev.h
+++ b/drivers/net/enic/base/vnic_dev.h
@@ -187,4 +187,5 @@ int vnic_dev_overlay_offload_ctrl(struct vnic_dev *vdev,
 int vnic_dev_overlay_offload_cfg(struct vnic_dev *vdev, u8 overlay,
 	u16 vxlan_udp_port_number);
 int vnic_dev_capable_vxlan(struct vnic_dev *vdev);
+int vnic_dev_capable_geneve(struct vnic_dev *vdev);
 #endif /* _VNIC_DEV_H_ */
diff --git a/drivers/net/enic/base/vnic_devcmd.h b/drivers/net/enic/base/vnic_devcmd.h
index fffe307e0..da60be7b0 100644
--- a/drivers/net/enic/base/vnic_devcmd.h
+++ b/drivers/net/enic/base/vnic_devcmd.h
@@ -537,6 +537,7 @@ enum vnic_devcmd_cmd {
 	 * Control (Enable/Disable) overlay offloads on the given vnic
 	 * in: (u8) a0 = OVERLAY_FEATURE_NVGRE : NVGRE
 	 *          a0 = OVERLAY_FEATURE_VXLAN : VxLAN
+	 *          a0 = OVERLAY_FEATURE_GENEVE : Geneve
 	 * in: (u8) a1 = OVERLAY_OFFLOAD_ENABLE : Enable or
 	 *          a1 = OVERLAY_OFFLOAD_DISABLE : Disable or
 	 *          a1 = OVERLAY_OFFLOAD_ENABLE_V2 : Enable with version 2
@@ -547,6 +548,7 @@ enum vnic_devcmd_cmd {
 	/*
 	 * Configuration of overlay offloads feature on a given vNIC
 	 * in: (u8) a0 = OVERLAY_CFG_VXLAN_PORT_UPDATE : VxLAN
+	 *               OVERLAY_CFG_GENEVE_PORT_UPDATE : Geneve
 	 * in: (u16) a1 = unsigned short int port information
 	 */
 	CMD_OVERLAY_OFFLOAD_CFG = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 73),
@@ -1081,6 +1083,7 @@ struct devcmd2_result {
 typedef enum {
 	OVERLAY_FEATURE_NVGRE = 1,
 	OVERLAY_FEATURE_VXLAN,
+	OVERLAY_FEATURE_GENEVE,
 	OVERLAY_FEATURE_MAX,
 } overlay_feature_t;
 
@@ -1089,6 +1092,7 @@ typedef enum {
 #define OVERLAY_OFFLOAD_ENABLE_V2       2
 
 #define OVERLAY_CFG_VXLAN_PORT_UPDATE 0
+#define OVERLAY_CFG_GENEVE_PORT_UPDATE 1
 
 /*
  * Use this enum to get the supported versions for each of these features
@@ -1098,6 +1102,7 @@ typedef enum {
 typedef enum {
 	VIC_FEATURE_VXLAN,
 	VIC_FEATURE_RDMA,
+	VIC_FEATURE_GENEVE,
 	VIC_FEATURE_MAX,
 } vic_feature_t;
 
@@ -1112,6 +1117,8 @@ typedef enum {
 
 #define FEATURE_VXLAN_IPV6		(FEATURE_VXLAN_IPV6_INNER | \
 					 FEATURE_VXLAN_IPV6_OUTER)
+/* Support Geneve option bytes */
+#define FEATURE_GENEVE_OPTIONS		(1 << 0)
 
 /*
  * CMD_CONFIG_GRPINTR subcommands
diff --git a/drivers/net/enic/enic.h b/drivers/net/enic/enic.h
index 5a92508f0..87792deec 100644
--- a/drivers/net/enic/enic.h
+++ b/drivers/net/enic/enic.h
@@ -130,6 +130,9 @@ struct enic {
 	bool vxlan;
 	bool disable_overlay; /* devargs disable_overlay=1 */
 	uint8_t enable_avx2_rx;  /* devargs enable-avx2-rx=1 */
+	uint8_t geneve_opt_avail;    /* Geneve with options offload available */
+	uint8_t geneve_opt_enabled;  /* Geneve with options offload enabled */
+	uint8_t geneve_opt_request;  /* devargs geneve-opt=1 */
 	bool nic_cfg_chk;     /* NIC_CFG_CHK available */
 	bool udp_rss_weak;    /* Bodega style UDP RSS */
 	uint8_t ig_vlan_rewrite_mode; /* devargs ig-vlan-rewrite */
diff --git a/drivers/net/enic/enic_ethdev.c b/drivers/net/enic/enic_ethdev.c
index 06dc67122..e1c6da3b3 100644
--- a/drivers/net/enic/enic_ethdev.c
+++ b/drivers/net/enic/enic_ethdev.c
@@ -67,6 +67,7 @@ static const struct vic_speed_capa {
 
 #define ENIC_DEVARG_DISABLE_OVERLAY "disable-overlay"
 #define ENIC_DEVARG_ENABLE_AVX2_RX "enable-avx2-rx"
+#define ENIC_DEVARG_GENEVE_OPT "geneve-opt"
 #define ENIC_DEVARG_IG_VLAN_REWRITE "ig-vlan-rewrite"
 
 RTE_INIT(enicpmd_init_log)
@@ -127,10 +128,17 @@ enicpmd_dev_filter_ctrl(struct rte_eth_dev *dev,
 		     enum rte_filter_op filter_op,
 		     void *arg)
 {
+	struct enic *enic = pmd_priv(dev);
 	int ret = 0;
 
 	ENICPMD_FUNC_TRACE();
 
+	/*
+	 * Currently, when Geneve with options offload is enabled, host
+	 * cannot insert match-action rules.
+	 */
+	if (enic->geneve_opt_enabled)
+		return -ENOTSUP;
 	switch (filter_type) {
 	case RTE_ETH_FILTER_GENERIC:
 		if (filter_op != RTE_ETH_FILTER_GET)
@@ -1123,6 +1131,8 @@ static int enic_parse_zero_one(const char *key,
 		enic->disable_overlay = b;
 	if (strcmp(key, ENIC_DEVARG_ENABLE_AVX2_RX) == 0)
 		enic->enable_avx2_rx = b;
+	if (strcmp(key, ENIC_DEVARG_GENEVE_OPT) == 0)
+		enic->geneve_opt_request = b;
 	return 0;
 }
 
@@ -1164,6 +1174,7 @@ static int enic_check_devargs(struct rte_eth_dev *dev)
 	static const char *const valid_keys[] = {
 		ENIC_DEVARG_DISABLE_OVERLAY,
 		ENIC_DEVARG_ENABLE_AVX2_RX,
+		ENIC_DEVARG_GENEVE_OPT,
 		ENIC_DEVARG_IG_VLAN_REWRITE,
 		NULL};
 	struct enic *enic = pmd_priv(dev);
@@ -1173,6 +1184,7 @@ static int enic_check_devargs(struct rte_eth_dev *dev)
 
 	enic->disable_overlay = false;
 	enic->enable_avx2_rx = false;
+	enic->geneve_opt_request = false;
 	enic->ig_vlan_rewrite_mode = IG_VLAN_REWRITE_MODE_PASS_THRU;
 	if (!dev->device->devargs)
 		return 0;
@@ -1183,6 +1195,8 @@ static int enic_check_devargs(struct rte_eth_dev *dev)
 			       enic_parse_zero_one, enic) < 0 ||
 	    rte_kvargs_process(kvlist, ENIC_DEVARG_ENABLE_AVX2_RX,
 			       enic_parse_zero_one, enic) < 0 ||
+	    rte_kvargs_process(kvlist, ENIC_DEVARG_GENEVE_OPT,
+			       enic_parse_zero_one, enic) < 0 ||
 	    rte_kvargs_process(kvlist, ENIC_DEVARG_IG_VLAN_REWRITE,
 			       enic_parse_ig_vlan_rewrite, enic) < 0) {
 		rte_kvargs_free(kvlist);
@@ -1252,4 +1266,5 @@ RTE_PMD_REGISTER_KMOD_DEP(net_enic, "* igb_uio | uio_pci_generic | vfio-pci");
 RTE_PMD_REGISTER_PARAM_STRING(net_enic,
 	ENIC_DEVARG_DISABLE_OVERLAY "=0|1 "
 	ENIC_DEVARG_ENABLE_AVX2_RX "=0|1 "
+	ENIC_DEVARG_GENEVE_OPT "=0|1 "
 	ENIC_DEVARG_IG_VLAN_REWRITE "=trunk|untag|priority|pass");
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index 40af3781b..fa993c657 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -1683,6 +1683,16 @@ static int enic_dev_init(struct enic *enic)
 	/* set up link status checking */
 	vnic_dev_notify_set(enic->vdev, -1); /* No Intr for notify */
 
+	/*
+	 * When Geneve with options offload is available, always disable it
+	 * first as it can interfere with user flow rules.
+	 */
+	if (enic->geneve_opt_avail &&
+	    vnic_dev_overlay_offload_ctrl(enic->vdev,
+			OVERLAY_FEATURE_GENEVE,
+			OVERLAY_OFFLOAD_DISABLE)) {
+		dev_err(enic, "failed to disable geneve+option\n");
+	}
 	enic->overlay_offload = false;
 	if (enic->disable_overlay && enic->vxlan) {
 		/*
@@ -1714,6 +1724,18 @@ static int enic_dev_init(struct enic *enic)
 		enic->overlay_offload = true;
 		dev_info(enic, "Overlay offload is enabled\n");
 	}
+	/* Geneve with options offload requires overlay offload */
+	if (enic->overlay_offload && enic->geneve_opt_avail &&
+	    enic->geneve_opt_request) {
+		if (vnic_dev_overlay_offload_ctrl(enic->vdev,
+				OVERLAY_FEATURE_GENEVE,
+				OVERLAY_OFFLOAD_ENABLE)) {
+			dev_err(enic, "failed to enable geneve+option\n");
+		} else {
+			enic->geneve_opt_enabled = 1;
+			dev_info(enic, "Geneve with options is enabled\n");
+		}
+	}
 	/*
 	 * Reset the vxlan port if HW vxlan parsing is available. It
 	 * is always enabled regardless of overlay offload
diff --git a/drivers/net/enic/enic_res.c b/drivers/net/enic/enic_res.c
index 9405e1933..742999cd0 100644
--- a/drivers/net/enic/enic_res.c
+++ b/drivers/net/enic/enic_res.c
@@ -179,6 +179,10 @@ int enic_get_vnic_config(struct enic *enic)
 
 	enic->vxlan = ENIC_SETTING(enic, VXLAN) &&
 		vnic_dev_capable_vxlan(enic->vdev);
+	if (vnic_dev_capable_geneve(enic->vdev)) {
+		dev_info(NULL, "Geneve with options offload available\n");
+		enic->geneve_opt_avail = 1;
+	}
 	/*
 	 * Default hardware capabilities. enic_dev_init() may add additional
 	 * flags if it enables overlay offloads.
-- 
2.22.0


  reply	other threads:[~2019-09-10 10:00 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-10  9:59 [dpdk-dev] [PATCH 0/2] net/enic: a couple new features Hyong Youb Kim
2019-09-10  9:59 ` Hyong Youb Kim [this message]
2019-09-10  9:59 ` [dpdk-dev] [PATCH 2/2] net/enic: add flow implementation based on Flow Manager API Hyong Youb Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190910095937.9731-2-hyonkim@cisco.com \
    --to=hyonkim@cisco.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=johndale@cisco.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).