From: <pbhagavatula@marvell.com>
To: <jerinj@marvell.com>, <bruce.richardson@intel.com>,
<akhil.goyal@nxp.com>,
Marko Kovacevic <marko.kovacevic@intel.com>,
Ori Kam <orika@mellanox.com>,
Radu Nicolau <radu.nicolau@intel.com>,
Tomasz Kantecki <tomasz.kantecki@intel.com>,
Sunil Kumar Kori <skori@marvell.com>,
"Pavan Nikhilesh" <pbhagavatula@marvell.com>
Cc: <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v2 05/10] examples/l2fwd-event: add eventdev queue and port setup
Date: Thu, 19 Sep 2019 14:55:59 +0530 [thread overview]
Message-ID: <20190919092603.5485-6-pbhagavatula@marvell.com> (raw)
In-Reply-To: <20190919092603.5485-1-pbhagavatula@marvell.com>
From: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add event device queue and port setup based on event eth Tx adapter
capabilities.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
---
examples/l2fwd-event/l2fwd_eventdev.c | 10 +
examples/l2fwd-event/l2fwd_eventdev.h | 18 ++
examples/l2fwd-event/l2fwd_eventdev_generic.c | 179 +++++++++++++++++-
.../l2fwd_eventdev_internal_port.c | 173 ++++++++++++++++-
4 files changed, 378 insertions(+), 2 deletions(-)
diff --git a/examples/l2fwd-event/l2fwd_eventdev.c b/examples/l2fwd-event/l2fwd_eventdev.c
index 0d0d3b8b9..7a3d077ae 100644
--- a/examples/l2fwd-event/l2fwd_eventdev.c
+++ b/examples/l2fwd-event/l2fwd_eventdev.c
@@ -216,6 +216,7 @@ eventdev_resource_setup(void)
{
struct eventdev_resources *eventdev_rsrc = get_eventdev_rsrc();
uint16_t ethdev_count = rte_eth_dev_count_avail();
+ uint32_t event_queue_cfg = 0;
uint32_t service_id;
int32_t ret;
@@ -233,6 +234,15 @@ eventdev_resource_setup(void)
/* Ethernet device configuration */
eth_dev_port_setup(ethdev_count);
+ /* Event device configuration */
+ event_queue_cfg = eventdev_rsrc->ops.eventdev_setup(ethdev_count);
+
+ /* Event queue configuration */
+ eventdev_rsrc->ops.event_queue_setup(ethdev_count, event_queue_cfg);
+
+ /* Event port configuration */
+ eventdev_rsrc->ops.event_port_setup();
+
/* Start event device service */
ret = rte_event_dev_service_id_get(eventdev_rsrc->event_d_id,
&service_id);
diff --git a/examples/l2fwd-event/l2fwd_eventdev.h b/examples/l2fwd-event/l2fwd_eventdev.h
index cc0bdd1ad..7646ef29f 100644
--- a/examples/l2fwd-event/l2fwd_eventdev.h
+++ b/examples/l2fwd-event/l2fwd_eventdev.h
@@ -26,6 +26,17 @@ typedef void (*event_port_setup_cb)(void);
typedef void (*service_setup_cb)(void);
typedef void (*event_loop_cb)(void);
+struct eventdev_queues {
+ uint8_t *event_q_id;
+ uint8_t nb_queues;
+};
+
+struct eventdev_ports {
+ uint8_t *event_p_id;
+ uint8_t nb_ports;
+ rte_spinlock_t lock;
+};
+
struct eventdev_setup_ops {
event_queue_setup_cb event_queue_setup;
event_port_setup_cb event_port_setup;
@@ -36,9 +47,14 @@ struct eventdev_setup_ops {
};
struct eventdev_resources {
+ struct rte_event_port_conf def_p_conf;
struct l2fwd_port_statistics *stats;
+ /* Default port config. */
+ uint8_t disable_implicit_release;
struct eventdev_setup_ops ops;
struct rte_mempool *pkt_pool;
+ struct eventdev_queues evq;
+ struct eventdev_ports evp;
uint64_t timer_period;
uint32_t *dst_ports;
uint32_t service_id;
@@ -47,6 +63,8 @@ struct eventdev_resources {
uint8_t event_d_id;
uint8_t sync_mode;
uint8_t tx_mode_q;
+ uint8_t deq_depth;
+ uint8_t has_burst;
uint8_t mac_updt;
uint8_t enabled;
uint8_t nb_args;
diff --git a/examples/l2fwd-event/l2fwd_eventdev_generic.c b/examples/l2fwd-event/l2fwd_eventdev_generic.c
index e3990f8b0..65166fded 100644
--- a/examples/l2fwd-event/l2fwd_eventdev_generic.c
+++ b/examples/l2fwd-event/l2fwd_eventdev_generic.c
@@ -17,8 +17,185 @@
#include "l2fwd_common.h"
#include "l2fwd_eventdev.h"
+static uint32_t
+eventdev_setup_generic(uint16_t ethdev_count)
+{
+ struct eventdev_resources *eventdev_rsrc = get_eventdev_rsrc();
+ struct rte_event_dev_config event_d_conf = {
+ .nb_events_limit = 4096,
+ .nb_event_queue_flows = 1024,
+ .nb_event_port_dequeue_depth = 128,
+ .nb_event_port_enqueue_depth = 128
+ };
+ struct rte_event_dev_info dev_info;
+ const uint8_t event_d_id = 0; /* Always use first event device only */
+ uint32_t event_queue_cfg = 0;
+ uint16_t num_workers = 0;
+ int ret;
+
+ /* Event device configurtion */
+ rte_event_dev_info_get(event_d_id, &dev_info);
+ eventdev_rsrc->disable_implicit_release = !!(dev_info.event_dev_cap &
+ RTE_EVENT_DEV_CAP_IMPLICIT_RELEASE_DISABLE);
+
+ if (dev_info.event_dev_cap & RTE_EVENT_DEV_CAP_QUEUE_ALL_TYPES)
+ event_queue_cfg |= RTE_EVENT_QUEUE_CFG_ALL_TYPES;
+
+ /* One queue for each ethdev port + one Tx adapter Single link queue. */
+ event_d_conf.nb_event_queues = ethdev_count + 1;
+ if (dev_info.max_event_queues < event_d_conf.nb_event_queues)
+ event_d_conf.nb_event_queues = dev_info.max_event_queues;
+
+ if (dev_info.max_num_events < event_d_conf.nb_events_limit)
+ event_d_conf.nb_events_limit = dev_info.max_num_events;
+
+ if (dev_info.max_event_queue_flows < event_d_conf.nb_event_queue_flows)
+ event_d_conf.nb_event_queue_flows =
+ dev_info.max_event_queue_flows;
+
+ if (dev_info.max_event_port_dequeue_depth <
+ event_d_conf.nb_event_port_dequeue_depth)
+ event_d_conf.nb_event_port_dequeue_depth =
+ dev_info.max_event_port_dequeue_depth;
+
+ if (dev_info.max_event_port_enqueue_depth <
+ event_d_conf.nb_event_port_enqueue_depth)
+ event_d_conf.nb_event_port_enqueue_depth =
+ dev_info.max_event_port_enqueue_depth;
+
+ num_workers = rte_lcore_count() - rte_service_lcore_count();
+ if (dev_info.max_event_ports < num_workers)
+ num_workers = dev_info.max_event_ports;
+
+ event_d_conf.nb_event_ports = num_workers;
+ eventdev_rsrc->evp.nb_ports = num_workers;
+
+ eventdev_rsrc->has_burst = !!(dev_info.event_dev_cap &
+ RTE_EVENT_DEV_CAP_BURST_MODE);
+
+ ret = rte_event_dev_configure(event_d_id, &event_d_conf);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Error in configuring event device");
+
+ eventdev_rsrc->event_d_id = event_d_id;
+ return event_queue_cfg;
+}
+
+static void
+event_port_setup_generic(void)
+{
+ struct eventdev_resources *eventdev_rsrc = get_eventdev_rsrc();
+ uint8_t event_d_id = eventdev_rsrc->event_d_id;
+ struct rte_event_port_conf event_p_conf = {
+ .dequeue_depth = 32,
+ .enqueue_depth = 32,
+ .new_event_threshold = 4096
+ };
+ struct rte_event_port_conf def_p_conf;
+ uint8_t event_p_id;
+ int32_t ret;
+
+ /* Service cores are not used to run worker thread */
+ eventdev_rsrc->evp.nb_ports = eventdev_rsrc->evp.nb_ports;
+ eventdev_rsrc->evp.event_p_id = (uint8_t *)malloc(sizeof(uint8_t) *
+ eventdev_rsrc->evp.nb_ports);
+ if (!eventdev_rsrc->evp.event_p_id)
+ rte_exit(EXIT_FAILURE, " No space is available");
+
+ memset(&def_p_conf, 0, sizeof(struct rte_event_port_conf));
+ rte_event_port_default_conf_get(event_d_id, 0, &def_p_conf);
+
+ if (def_p_conf.new_event_threshold < event_p_conf.new_event_threshold)
+ event_p_conf.new_event_threshold =
+ def_p_conf.new_event_threshold;
+
+ if (def_p_conf.dequeue_depth < event_p_conf.dequeue_depth)
+ event_p_conf.dequeue_depth = def_p_conf.dequeue_depth;
+
+ if (def_p_conf.enqueue_depth < event_p_conf.enqueue_depth)
+ event_p_conf.enqueue_depth = def_p_conf.enqueue_depth;
+
+ event_p_conf.disable_implicit_release =
+ eventdev_rsrc->disable_implicit_release;
+ eventdev_rsrc->deq_depth = def_p_conf.dequeue_depth;
+
+ for (event_p_id = 0; event_p_id < eventdev_rsrc->evp.nb_ports;
+ event_p_id++) {
+ ret = rte_event_port_setup(event_d_id, event_p_id,
+ &event_p_conf);
+ if (ret < 0) {
+ rte_exit(EXIT_FAILURE,
+ "Error in configuring event port %d\n",
+ event_p_id);
+ }
+
+ ret = rte_event_port_link(event_d_id, event_p_id,
+ eventdev_rsrc->evq.event_q_id,
+ NULL,
+ eventdev_rsrc->evq.nb_queues - 1);
+ if (ret != (eventdev_rsrc->evq.nb_queues - 1)) {
+ rte_exit(EXIT_FAILURE, "Error in linking event port %d "
+ "to event queue", event_p_id);
+ }
+ eventdev_rsrc->evp.event_p_id[event_p_id] = event_p_id;
+ }
+ /* init spinlock */
+ rte_spinlock_init(&eventdev_rsrc->evp.lock);
+
+ eventdev_rsrc->def_p_conf = event_p_conf;
+}
+
+static void
+event_queue_setup_generic(uint16_t ethdev_count, uint32_t event_queue_cfg)
+{
+ struct eventdev_resources *eventdev_rsrc = get_eventdev_rsrc();
+ uint8_t event_d_id = eventdev_rsrc->event_d_id;
+ struct rte_event_queue_conf event_q_conf = {
+ .nb_atomic_flows = 1024,
+ .nb_atomic_order_sequences = 1024,
+ .event_queue_cfg = event_queue_cfg,
+ .priority = RTE_EVENT_DEV_PRIORITY_NORMAL
+ };
+ struct rte_event_queue_conf def_q_conf;
+ uint8_t event_q_id;
+ int32_t ret;
+
+ event_q_conf.schedule_type = eventdev_rsrc->sync_mode;
+ eventdev_rsrc->evq.nb_queues = ethdev_count + 1;
+ eventdev_rsrc->evq.event_q_id = (uint8_t *)malloc(sizeof(uint8_t) *
+ eventdev_rsrc->evq.nb_queues);
+ if (!eventdev_rsrc->evq.event_q_id)
+ rte_exit(EXIT_FAILURE, "Memory allocation failure");
+
+ rte_event_queue_default_conf_get(event_d_id, 0, &def_q_conf);
+ if (def_q_conf.nb_atomic_flows < event_q_conf.nb_atomic_flows)
+ event_q_conf.nb_atomic_flows = def_q_conf.nb_atomic_flows;
+
+ for (event_q_id = 0; event_q_id < (eventdev_rsrc->evq.nb_queues - 1);
+ event_q_id++) {
+ ret = rte_event_queue_setup(event_d_id, event_q_id,
+ &event_q_conf);
+ if (ret < 0) {
+ rte_exit(EXIT_FAILURE,
+ "Error in configuring event queue");
+ }
+ eventdev_rsrc->evq.event_q_id[event_q_id] = event_q_id;
+ }
+
+ event_q_conf.event_queue_cfg |= RTE_EVENT_QUEUE_CFG_SINGLE_LINK;
+ event_q_conf.priority = RTE_EVENT_DEV_PRIORITY_HIGHEST,
+ ret = rte_event_queue_setup(event_d_id, event_q_id, &event_q_conf);
+ if (ret < 0) {
+ rte_exit(EXIT_FAILURE,
+ "Error in configuring event queue for Tx adapter");
+ }
+ eventdev_rsrc->evq.event_q_id[event_q_id] = event_q_id;
+}
+
void
eventdev_set_generic_ops(struct eventdev_setup_ops *ops)
{
- RTE_SET_USED(ops);
+ ops->eventdev_setup = eventdev_setup_generic;
+ ops->event_queue_setup = event_queue_setup_generic;
+ ops->event_port_setup = event_port_setup_generic;
}
diff --git a/examples/l2fwd-event/l2fwd_eventdev_internal_port.c b/examples/l2fwd-event/l2fwd_eventdev_internal_port.c
index a0d2111f9..52cb07707 100644
--- a/examples/l2fwd-event/l2fwd_eventdev_internal_port.c
+++ b/examples/l2fwd-event/l2fwd_eventdev_internal_port.c
@@ -17,8 +17,179 @@
#include "l2fwd_common.h"
#include "l2fwd_eventdev.h"
+static uint32_t
+eventdev_setup_internal_port(uint16_t ethdev_count)
+{
+ struct eventdev_resources *eventdev_rsrc = get_eventdev_rsrc();
+ struct rte_event_dev_config event_d_conf = {
+ .nb_events_limit = 4096,
+ .nb_event_queue_flows = 1024,
+ .nb_event_port_dequeue_depth = 128,
+ .nb_event_port_enqueue_depth = 128
+ };
+ struct rte_event_dev_info dev_info;
+ uint8_t disable_implicit_release;
+ const uint8_t event_d_id = 0; /* Always use first event device only */
+ uint32_t event_queue_cfg = 0;
+ uint16_t num_workers = 0;
+ int ret;
+
+ /* Event device configurtion */
+ rte_event_dev_info_get(event_d_id, &dev_info);
+
+ disable_implicit_release = !!(dev_info.event_dev_cap &
+ RTE_EVENT_DEV_CAP_IMPLICIT_RELEASE_DISABLE);
+ eventdev_rsrc->disable_implicit_release =
+ disable_implicit_release;
+
+ if (dev_info.event_dev_cap & RTE_EVENT_DEV_CAP_QUEUE_ALL_TYPES)
+ event_queue_cfg |= RTE_EVENT_QUEUE_CFG_ALL_TYPES;
+
+ event_d_conf.nb_event_queues = ethdev_count;
+ if (dev_info.max_event_queues < event_d_conf.nb_event_queues)
+ event_d_conf.nb_event_queues = dev_info.max_event_queues;
+
+ if (dev_info.max_num_events < event_d_conf.nb_events_limit)
+ event_d_conf.nb_events_limit = dev_info.max_num_events;
+
+ if (dev_info.max_event_queue_flows < event_d_conf.nb_event_queue_flows)
+ event_d_conf.nb_event_queue_flows =
+ dev_info.max_event_queue_flows;
+
+ if (dev_info.max_event_port_dequeue_depth <
+ event_d_conf.nb_event_port_dequeue_depth)
+ event_d_conf.nb_event_port_dequeue_depth =
+ dev_info.max_event_port_dequeue_depth;
+
+ if (dev_info.max_event_port_enqueue_depth <
+ event_d_conf.nb_event_port_enqueue_depth)
+ event_d_conf.nb_event_port_enqueue_depth =
+ dev_info.max_event_port_enqueue_depth;
+
+ num_workers = rte_lcore_count();
+ if (dev_info.max_event_ports < num_workers)
+ num_workers = dev_info.max_event_ports;
+
+ event_d_conf.nb_event_ports = num_workers;
+ eventdev_rsrc->evp.nb_ports = num_workers;
+ eventdev_rsrc->has_burst = !!(dev_info.event_dev_cap &
+ RTE_EVENT_DEV_CAP_BURST_MODE);
+
+ ret = rte_event_dev_configure(event_d_id, &event_d_conf);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Error in configuring event device");
+
+ eventdev_rsrc->event_d_id = event_d_id;
+ return event_queue_cfg;
+}
+
+static void
+event_port_setup_internal_port(void)
+{
+ struct eventdev_resources *eventdev_rsrc = get_eventdev_rsrc();
+ uint8_t event_d_id = eventdev_rsrc->event_d_id;
+ struct rte_event_port_conf event_p_conf = {
+ .dequeue_depth = 32,
+ .enqueue_depth = 32,
+ .new_event_threshold = 4096
+ };
+ struct rte_event_port_conf def_p_conf;
+ uint8_t event_p_id;
+ int32_t ret;
+
+ eventdev_rsrc->evp.event_p_id = (uint8_t *)malloc(sizeof(uint8_t) *
+ eventdev_rsrc->evp.nb_ports);
+ if (!eventdev_rsrc->evp.event_p_id)
+ rte_exit(EXIT_FAILURE,
+ "Failed to allocate memory for Event Ports");
+
+ rte_event_port_default_conf_get(event_d_id, 0, &def_p_conf);
+ if (def_p_conf.new_event_threshold < event_p_conf.new_event_threshold)
+ event_p_conf.new_event_threshold =
+ def_p_conf.new_event_threshold;
+
+ if (def_p_conf.dequeue_depth < event_p_conf.dequeue_depth)
+ event_p_conf.dequeue_depth = def_p_conf.dequeue_depth;
+
+ if (def_p_conf.enqueue_depth < event_p_conf.enqueue_depth)
+ event_p_conf.enqueue_depth = def_p_conf.enqueue_depth;
+
+ event_p_conf.disable_implicit_release =
+ eventdev_rsrc->disable_implicit_release;
+
+ for (event_p_id = 0; event_p_id < eventdev_rsrc->evp.nb_ports;
+ event_p_id++) {
+ ret = rte_event_port_setup(event_d_id, event_p_id,
+ &event_p_conf);
+ if (ret < 0) {
+ rte_exit(EXIT_FAILURE,
+ "Error in configuring event port %d\n",
+ event_p_id);
+ }
+
+ ret = rte_event_port_link(event_d_id, event_p_id, NULL,
+ NULL, 0);
+ if (ret < 0) {
+ rte_exit(EXIT_FAILURE, "Error in linking event port %d "
+ "to event queue", event_p_id);
+ }
+ eventdev_rsrc->evp.event_p_id[event_p_id] = event_p_id;
+
+ /* init spinlock */
+ rte_spinlock_init(&eventdev_rsrc->evp.lock);
+ }
+
+ eventdev_rsrc->def_p_conf = event_p_conf;
+}
+
+static void
+event_queue_setup_internal_port(uint16_t ethdev_count, uint32_t event_queue_cfg)
+{
+ struct eventdev_resources *eventdev_rsrc = get_eventdev_rsrc();
+ uint8_t event_d_id = eventdev_rsrc->event_d_id;
+ struct rte_event_queue_conf event_q_conf = {
+ .nb_atomic_flows = 1024,
+ .nb_atomic_order_sequences = 1024,
+ .event_queue_cfg = event_queue_cfg,
+ .priority = RTE_EVENT_DEV_PRIORITY_NORMAL
+ };
+ struct rte_event_queue_conf def_q_conf;
+ uint8_t event_q_id = 0;
+ int32_t ret;
+
+ rte_event_queue_default_conf_get(event_d_id, event_q_id, &def_q_conf);
+
+ if (def_q_conf.nb_atomic_flows < event_q_conf.nb_atomic_flows)
+ event_q_conf.nb_atomic_flows = def_q_conf.nb_atomic_flows;
+
+ if (def_q_conf.nb_atomic_order_sequences <
+ event_q_conf.nb_atomic_order_sequences)
+ event_q_conf.nb_atomic_order_sequences =
+ def_q_conf.nb_atomic_order_sequences;
+
+ event_q_conf.event_queue_cfg = event_queue_cfg;
+ event_q_conf.schedule_type = eventdev_rsrc->sync_mode;
+ eventdev_rsrc->evq.nb_queues = ethdev_count;
+ eventdev_rsrc->evq.event_q_id = (uint8_t *)malloc(sizeof(uint8_t) *
+ eventdev_rsrc->evq.nb_queues);
+ if (!eventdev_rsrc->evq.event_q_id)
+ rte_exit(EXIT_FAILURE, "Memory allocation failure");
+
+ for (event_q_id = 0; event_q_id < ethdev_count; event_q_id++) {
+ ret = rte_event_queue_setup(event_d_id, event_q_id,
+ &event_q_conf);
+ if (ret < 0) {
+ rte_exit(EXIT_FAILURE,
+ "Error in configuring event queue");
+ }
+ eventdev_rsrc->evq.event_q_id[event_q_id] = event_q_id;
+ }
+}
+
void
eventdev_set_internal_port_ops(struct eventdev_setup_ops *ops)
{
- RTE_SET_USED(ops);
+ ops->eventdev_setup = eventdev_setup_internal_port;
+ ops->event_queue_setup = event_queue_setup_internal_port;
+ ops->event_port_setup = event_port_setup_internal_port;
}
--
2.17.1
next prev parent reply other threads:[~2019-09-19 9:27 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-19 9:25 [dpdk-dev] [PATCH v2 00/10] example/l2fwd-event: introduce l2fwd-event example pbhagavatula
2019-09-19 9:25 ` [dpdk-dev] [PATCH v2 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-09-19 9:43 ` Sunil Kumar Kori
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 00/10] example/l2fwd-event: introduce l2fwd-event example pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 04/10] examples/l2fwd-event: add eth port setup for eventdev pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-09-19 10:35 ` Sunil Kumar Kori
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 10/10] doc: add application usage guide for l2fwd-event pbhagavatula
2019-09-24 9:41 ` [dpdk-dev] [PATCH v4 00/10] example/l2fwd-event: introduce l2fwd-event example pbhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-09-26 17:28 ` Jerin Jacob
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-09-26 17:33 ` Jerin Jacob
2019-09-27 13:08 ` Nipun Gupta
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 04/10] examples/l2fwd-event: add eth port setup for eventdev pbhagavatula
2019-09-27 13:15 ` Nipun Gupta
2019-09-27 14:45 ` Pavan Nikhilesh Bhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-09-27 13:22 ` Nipun Gupta
2019-09-27 14:43 ` Pavan Nikhilesh Bhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-09-27 13:28 ` Nipun Gupta
2019-09-27 14:35 ` Pavan Nikhilesh Bhagavatula
2019-09-30 5:38 ` Nipun Gupta
2019-09-30 6:38 ` Jerin Jacob
2019-09-30 7:46 ` Nipun Gupta
2019-09-30 8:09 ` Pavan Nikhilesh Bhagavatula
2019-09-30 17:50 ` Nipun Gupta
2019-10-01 5:59 ` Pavan Nikhilesh Bhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 10/10] doc: add application usage guide for l2fwd-event pbhagavatula
2019-09-26 17:42 ` Jerin Jacob
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 00/10] example/l2fwd-event: introduce l2fwd-event example pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-10-11 14:41 ` Jerin Jacob
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-10-04 12:30 ` Nipun Gupta
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 04/10] examples/l2fwd-event: add event device setup pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-10-11 14:52 ` Jerin Jacob
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 10/10] doc: add application usage guide for l2fwd-event pbhagavatula
2019-10-11 14:11 ` Jerin Jacob
2019-10-03 10:33 ` [dpdk-dev] [PATCH v5 00/10] example/l2fwd-event: introduce l2fwd-event example Jerin Jacob
2019-10-03 12:40 ` Hemant Agrawal
2019-10-03 12:47 ` Jerin Jacob
2019-10-09 7:50 ` Nipun Gupta
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 " pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-10-16 19:07 ` Stephen Hemminger
2019-10-21 3:29 ` Varghese, Vipin
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 04/10] examples/l2fwd-event: add event device setup pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-10-21 3:19 ` Varghese, Vipin
2019-10-21 16:53 ` Pavan Nikhilesh Bhagavatula
2019-10-22 3:13 ` Varghese, Vipin
2019-10-22 17:02 ` Pavan Nikhilesh Bhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
2019-10-21 3:12 ` Varghese, Vipin
2019-10-21 16:56 ` Pavan Nikhilesh Bhagavatula
2019-10-22 2:48 ` Varghese, Vipin
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 10/10] doc: add application usage guide for l2fwd-event pbhagavatula
2019-10-16 12:38 ` [dpdk-dev] [PATCH v6 00/10] example/l2fwd-event: introduce l2fwd-event example Jerin Jacob
2019-10-21 3:25 ` Varghese, Vipin
2019-10-21 17:02 ` Pavan Nikhilesh Bhagavatula
2019-10-22 2:57 ` Varghese, Vipin
2019-10-22 15:55 ` Pavan Nikhilesh Bhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 " pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 04/10] examples/l2fwd-event: add event device setup pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 10/10] doc: add application usage guide for l2fwd-event pbhagavatula
2019-10-30 13:19 ` Jerin Jacob
2019-10-30 12:58 ` [dpdk-dev] [PATCH v7 00/10] example/l2fwd-event: introduce l2fwd-event example Jerin Jacob
2019-09-19 9:25 ` [dpdk-dev] [PATCH v2 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-09-19 9:25 ` [dpdk-dev] [PATCH v2 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-09-19 9:25 ` [dpdk-dev] [PATCH v2 04/10] examples/l2fwd-event: add eth port setup for eventdev pbhagavatula
2019-09-19 9:25 ` pbhagavatula [this message]
2019-09-19 9:26 ` [dpdk-dev] [PATCH v2 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-09-19 9:26 ` [dpdk-dev] [PATCH v2 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-09-19 9:26 ` [dpdk-dev] [PATCH v2 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-09-19 9:26 ` [dpdk-dev] [PATCH v2 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190919092603.5485-6-pbhagavatula@marvell.com \
--to=pbhagavatula@marvell.com \
--cc=akhil.goyal@nxp.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=marko.kovacevic@intel.com \
--cc=orika@mellanox.com \
--cc=radu.nicolau@intel.com \
--cc=skori@marvell.com \
--cc=tomasz.kantecki@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).