From: <pbhagavatula@marvell.com>
To: <jerinj@marvell.com>, <bruce.richardson@intel.com>,
<akhil.goyal@nxp.com>
Cc: <dev@dpdk.org>, Pavan Nikhilesh <pbhagavatula@marvell.com>
Subject: [dpdk-dev] [PATCH v4 00/10] example/l2fwd-event: introduce l2fwd-event example
Date: Tue, 24 Sep 2019 15:11:59 +0530 [thread overview]
Message-ID: <20190924094209.3827-1-pbhagavatula@marvell.com> (raw)
In-Reply-To: <20190919101346.8832-1-pbhagavatula@marvell.com>
From: Pavan Nikhilesh <pbhagavatula@marvell.com>
This patchset adds a new application to demonstrate the usage of event
mode. The poll mode is also available to help with the transition.
The following new command line parameters are added:
--mode: Dictates the mode of operation either poll or event.
--eventq_sync: Dictates event synchronization mode either atomic or
ordered.
Based on event device capability the configuration is done as follows:
- A single event device is enabled.
- The number of event ports is equal to the number of worker
cores enabled in the core mask. Additional event ports might
be configured based on Rx/Tx adapter capability.
- The number of event queues is equal to the number of ethernet
ports. If Tx adapter doesn't have internal port capability then
an additional single link event queue is used to enqueue events
to Tx adapter.
- Each event port is linked to all existing event queues.
- Dedicated Rx/Tx adapters for each Ethernet port.
v4 Changes:
- Fix missing eventdev args parsing.
v3 Changes:
- Remove unwanted change to example/l2fwd.
- Fix checkpatch issue
http://mails.dpdk.org/archives/test-report/2019-September/098053.html
v2 Changes:
- Remove global variables.
- Split patches to make reviews friendlier.
- Split datapath based on eventdev capability.
checkpatch reports for v08/10 is intended
http://mails.dpdk.org/archives/test-report/2019-September/098059.html
Pavan Nikhilesh (5):
examples/l2fwd-event: add infra to split eventdev framework
examples/l2fwd-event: add eventdev queue and port setup
examples/l2fwd-event: add event Rx/Tx adapter setup
examples/l2fwd-event: add eventdev main loop
examples/l2fwd-event: add graceful teardown
Sunil Kumar Kori (5):
examples/l2fwd-event: add default poll mode routines
examples/l2fwd-event: add infra for eventdev
examples/l2fwd-event: add eth port setup for eventdev
examples/l2fwd-event: add service core setup
doc: add application usage guide for l2fwd-event
MAINTAINERS | 5 +
doc/guides/sample_app_ug/index.rst | 1 +
doc/guides/sample_app_ug/intro.rst | 5 +
.../l2_forward_event_real_virtual.rst | 799 +++++++++++++++++
examples/Makefile | 1 +
examples/l2fwd-event/Makefile | 60 ++
examples/l2fwd-event/l2fwd_common.h | 26 +
examples/l2fwd-event/l2fwd_eventdev.c | 536 ++++++++++++
examples/l2fwd-event/l2fwd_eventdev.h | 118 +++
examples/l2fwd-event/l2fwd_eventdev_generic.c | 349 ++++++++
.../l2fwd_eventdev_internal_port.c | 281 ++++++
examples/l2fwd-event/main.c | 821 ++++++++++++++++++
examples/l2fwd-event/meson.build | 15 +
13 files changed, 3017 insertions(+)
create mode 100644 doc/guides/sample_app_ug/l2_forward_event_real_virtual.rst
create mode 100644 examples/l2fwd-event/Makefile
create mode 100644 examples/l2fwd-event/l2fwd_common.h
create mode 100644 examples/l2fwd-event/l2fwd_eventdev.c
create mode 100644 examples/l2fwd-event/l2fwd_eventdev.h
create mode 100644 examples/l2fwd-event/l2fwd_eventdev_generic.c
create mode 100644 examples/l2fwd-event/l2fwd_eventdev_internal_port.c
create mode 100644 examples/l2fwd-event/main.c
create mode 100644 examples/l2fwd-event/meson.build
--
2.17.1
next prev parent reply other threads:[~2019-09-24 9:42 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-19 9:25 [dpdk-dev] [PATCH v2 " pbhagavatula
2019-09-19 9:25 ` [dpdk-dev] [PATCH v2 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-09-19 9:43 ` Sunil Kumar Kori
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 00/10] example/l2fwd-event: introduce l2fwd-event example pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 04/10] examples/l2fwd-event: add eth port setup for eventdev pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-09-19 10:35 ` Sunil Kumar Kori
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 10/10] doc: add application usage guide for l2fwd-event pbhagavatula
2019-09-24 9:41 ` pbhagavatula [this message]
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-09-26 17:28 ` Jerin Jacob
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-09-26 17:33 ` Jerin Jacob
2019-09-27 13:08 ` Nipun Gupta
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 04/10] examples/l2fwd-event: add eth port setup for eventdev pbhagavatula
2019-09-27 13:15 ` Nipun Gupta
2019-09-27 14:45 ` Pavan Nikhilesh Bhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-09-27 13:22 ` Nipun Gupta
2019-09-27 14:43 ` Pavan Nikhilesh Bhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-09-27 13:28 ` Nipun Gupta
2019-09-27 14:35 ` Pavan Nikhilesh Bhagavatula
2019-09-30 5:38 ` Nipun Gupta
2019-09-30 6:38 ` Jerin Jacob
2019-09-30 7:46 ` Nipun Gupta
2019-09-30 8:09 ` Pavan Nikhilesh Bhagavatula
2019-09-30 17:50 ` Nipun Gupta
2019-10-01 5:59 ` Pavan Nikhilesh Bhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 10/10] doc: add application usage guide for l2fwd-event pbhagavatula
2019-09-26 17:42 ` Jerin Jacob
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 00/10] example/l2fwd-event: introduce l2fwd-event example pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-10-11 14:41 ` Jerin Jacob
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-10-04 12:30 ` Nipun Gupta
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 04/10] examples/l2fwd-event: add event device setup pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-10-11 14:52 ` Jerin Jacob
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 10/10] doc: add application usage guide for l2fwd-event pbhagavatula
2019-10-11 14:11 ` Jerin Jacob
2019-10-03 10:33 ` [dpdk-dev] [PATCH v5 00/10] example/l2fwd-event: introduce l2fwd-event example Jerin Jacob
2019-10-03 12:40 ` Hemant Agrawal
2019-10-03 12:47 ` Jerin Jacob
2019-10-09 7:50 ` Nipun Gupta
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 " pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-10-16 19:07 ` Stephen Hemminger
2019-10-21 3:29 ` Varghese, Vipin
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 04/10] examples/l2fwd-event: add event device setup pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-10-21 3:19 ` Varghese, Vipin
2019-10-21 16:53 ` Pavan Nikhilesh Bhagavatula
2019-10-22 3:13 ` Varghese, Vipin
2019-10-22 17:02 ` Pavan Nikhilesh Bhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
2019-10-21 3:12 ` Varghese, Vipin
2019-10-21 16:56 ` Pavan Nikhilesh Bhagavatula
2019-10-22 2:48 ` Varghese, Vipin
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 10/10] doc: add application usage guide for l2fwd-event pbhagavatula
2019-10-16 12:38 ` [dpdk-dev] [PATCH v6 00/10] example/l2fwd-event: introduce l2fwd-event example Jerin Jacob
2019-10-21 3:25 ` Varghese, Vipin
2019-10-21 17:02 ` Pavan Nikhilesh Bhagavatula
2019-10-22 2:57 ` Varghese, Vipin
2019-10-22 15:55 ` Pavan Nikhilesh Bhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 " pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 04/10] examples/l2fwd-event: add event device setup pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 10/10] doc: add application usage guide for l2fwd-event pbhagavatula
2019-10-30 13:19 ` Jerin Jacob
2019-10-30 12:58 ` [dpdk-dev] [PATCH v7 00/10] example/l2fwd-event: introduce l2fwd-event example Jerin Jacob
2019-09-19 9:25 ` [dpdk-dev] [PATCH v2 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-09-19 9:25 ` [dpdk-dev] [PATCH v2 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-09-19 9:25 ` [dpdk-dev] [PATCH v2 04/10] examples/l2fwd-event: add eth port setup for eventdev pbhagavatula
2019-09-19 9:25 ` [dpdk-dev] [PATCH v2 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-09-19 9:26 ` [dpdk-dev] [PATCH v2 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-09-19 9:26 ` [dpdk-dev] [PATCH v2 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-09-19 9:26 ` [dpdk-dev] [PATCH v2 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-09-19 9:26 ` [dpdk-dev] [PATCH v2 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190924094209.3827-1-pbhagavatula@marvell.com \
--to=pbhagavatula@marvell.com \
--cc=akhil.goyal@nxp.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).