From: <pbhagavatula@marvell.com>
To: <jerinj@marvell.com>, <bruce.richardson@intel.com>,
<akhil.goyal@nxp.com>,
Marko Kovacevic <marko.kovacevic@intel.com>,
Ori Kam <orika@mellanox.com>,
Radu Nicolau <radu.nicolau@intel.com>,
Tomasz Kantecki <tomasz.kantecki@intel.com>,
Sunil Kumar Kori <skori@marvell.com>,
"Pavan Nikhilesh" <pbhagavatula@marvell.com>
Cc: <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v5 05/10] examples/l2fwd-event: add eventdev queue and port setup
Date: Thu, 3 Oct 2019 02:27:49 +0530 [thread overview]
Message-ID: <20191002205754.11746-6-pbhagavatula@marvell.com> (raw)
In-Reply-To: <20191002205754.11746-1-pbhagavatula@marvell.com>
From: Sunil Kumar Kori <skori@marvell.com>
Add event device queue and port setup based on event eth Tx adapter
capabilities.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
---
examples/l2fwd-event/l2fwd_event.c | 9 +-
examples/l2fwd-event/l2fwd_event.h | 10 ++
examples/l2fwd-event/l2fwd_event_generic.c | 111 ++++++++++++++++++
.../l2fwd-event/l2fwd_event_internal_port.c | 106 +++++++++++++++++
4 files changed, 235 insertions(+), 1 deletion(-)
diff --git a/examples/l2fwd-event/l2fwd_event.c b/examples/l2fwd-event/l2fwd_event.c
index 188f06fd2..9b315e5e1 100644
--- a/examples/l2fwd-event/l2fwd_event.c
+++ b/examples/l2fwd-event/l2fwd_event.c
@@ -45,6 +45,7 @@ void
l2fwd_event_resource_setup(struct l2fwd_resources *l2fwd_rsrc)
{
struct l2fwd_event_resources *event_rsrc;
+ uint32_t event_queue_cfg;
if (!rte_event_dev_count())
rte_exit(EXIT_FAILURE, "No Eventdev found\n");
@@ -60,5 +61,11 @@ l2fwd_event_resource_setup(struct l2fwd_resources *l2fwd_rsrc)
l2fwd_event_capability_setup(event_rsrc);
/* Event device configuration */
- event_rsrc->ops.event_device_setup(l2fwd_rsrc);
+ event_queue_cfg = event_rsrc->ops.event_device_setup(l2fwd_rsrc);
+
+ /* Event queue configuration */
+ event_rsrc->ops.event_queue_setup(l2fwd_rsrc, event_queue_cfg);
+
+ /* Event port configuration */
+ event_rsrc->ops.event_port_setup(l2fwd_rsrc);
}
diff --git a/examples/l2fwd-event/l2fwd_event.h b/examples/l2fwd-event/l2fwd_event.h
index 7ec985ae7..93d254cf3 100644
--- a/examples/l2fwd-event/l2fwd_event.h
+++ b/examples/l2fwd-event/l2fwd_event.h
@@ -14,27 +14,37 @@
#include "l2fwd_common.h"
typedef uint32_t (*event_device_setup_cb)(struct l2fwd_resources *l2fwd_rsrc);
+typedef void (*event_port_setup_cb)(struct l2fwd_resources *l2fwd_rsrc);
+typedef void (*event_queue_setup_cb)(struct l2fwd_resources *l2fwd_rsrc,
+ uint32_t event_queue_cfg);
struct event_queues {
+ uint8_t *event_q_id;
uint8_t nb_queues;
};
struct event_ports {
+ uint8_t *event_p_id;
uint8_t nb_ports;
+ rte_spinlock_t lock;
};
struct event_setup_ops {
event_device_setup_cb event_device_setup;
+ event_queue_setup_cb event_queue_setup;
+ event_port_setup_cb event_port_setup;
};
struct l2fwd_event_resources {
uint8_t tx_mode_q;
+ uint8_t deq_depth;
uint8_t has_burst;
uint8_t event_d_id;
uint8_t disable_implicit_release;
struct event_ports evp;
struct event_queues evq;
struct event_setup_ops ops;
+ struct rte_event_port_conf def_p_conf;
};
void l2fwd_event_resource_setup(struct l2fwd_resources *l2fwd_rsrc);
diff --git a/examples/l2fwd-event/l2fwd_event_generic.c b/examples/l2fwd-event/l2fwd_event_generic.c
index 2e82c6bdf..6922e2e5e 100644
--- a/examples/l2fwd-event/l2fwd_event_generic.c
+++ b/examples/l2fwd-event/l2fwd_event_generic.c
@@ -89,8 +89,119 @@ l2fwd_event_device_setup_generic(struct l2fwd_resources *l2fwd_rsrc)
return event_queue_cfg;
}
+static void
+l2fwd_event_port_setup_generic(struct l2fwd_resources *l2fwd_rsrc)
+{
+ struct l2fwd_event_resources *event_rsrc = l2fwd_rsrc->event_rsrc;
+ uint8_t event_d_id = event_rsrc->event_d_id;
+ struct rte_event_port_conf event_p_conf = {
+ .dequeue_depth = 32,
+ .enqueue_depth = 32,
+ .new_event_threshold = 4096
+ };
+ struct rte_event_port_conf def_p_conf;
+ uint8_t event_p_id;
+ int32_t ret;
+
+ event_rsrc->evp.event_p_id = (uint8_t *)malloc(sizeof(uint8_t) *
+ event_rsrc->evp.nb_ports);
+ if (!event_rsrc->evp.event_p_id)
+ rte_exit(EXIT_FAILURE, " No space is available");
+
+ memset(&def_p_conf, 0, sizeof(struct rte_event_port_conf));
+ rte_event_port_default_conf_get(event_d_id, 0, &def_p_conf);
+
+ if (def_p_conf.new_event_threshold < event_p_conf.new_event_threshold)
+ event_p_conf.new_event_threshold =
+ def_p_conf.new_event_threshold;
+
+ if (def_p_conf.dequeue_depth < event_p_conf.dequeue_depth)
+ event_p_conf.dequeue_depth = def_p_conf.dequeue_depth;
+
+ if (def_p_conf.enqueue_depth < event_p_conf.enqueue_depth)
+ event_p_conf.enqueue_depth = def_p_conf.enqueue_depth;
+
+ event_p_conf.disable_implicit_release =
+ event_rsrc->disable_implicit_release;
+ event_rsrc->deq_depth = def_p_conf.dequeue_depth;
+
+ for (event_p_id = 0; event_p_id < event_rsrc->evp.nb_ports;
+ event_p_id++) {
+ ret = rte_event_port_setup(event_d_id, event_p_id,
+ &event_p_conf);
+ if (ret < 0) {
+ rte_exit(EXIT_FAILURE,
+ "Error in configuring event port %d\n",
+ event_p_id);
+ }
+
+ ret = rte_event_port_link(event_d_id, event_p_id,
+ event_rsrc->evq.event_q_id,
+ NULL,
+ event_rsrc->evq.nb_queues - 1);
+ if (ret != (event_rsrc->evq.nb_queues - 1)) {
+ rte_exit(EXIT_FAILURE, "Error in linking event port %d "
+ "to event queue", event_p_id);
+ }
+ event_rsrc->evp.event_p_id[event_p_id] = event_p_id;
+ }
+ /* init spinlock */
+ rte_spinlock_init(&event_rsrc->evp.lock);
+
+ event_rsrc->def_p_conf = event_p_conf;
+}
+
+static void
+l2fwd_event_queue_setup_generic(struct l2fwd_resources *l2fwd_rsrc,
+ uint32_t event_queue_cfg)
+{
+ struct l2fwd_event_resources *event_rsrc = l2fwd_rsrc->event_rsrc;
+ uint8_t event_d_id = event_rsrc->event_d_id;
+ struct rte_event_queue_conf event_q_conf = {
+ .nb_atomic_flows = 1024,
+ .nb_atomic_order_sequences = 1024,
+ .event_queue_cfg = event_queue_cfg,
+ .priority = RTE_EVENT_DEV_PRIORITY_NORMAL
+ };
+ struct rte_event_queue_conf def_q_conf;
+ uint8_t event_q_id;
+ int32_t ret;
+
+ event_q_conf.schedule_type = l2fwd_rsrc->sched_type;
+ event_rsrc->evq.event_q_id = (uint8_t *)malloc(sizeof(uint8_t) *
+ event_rsrc->evq.nb_queues);
+ if (!event_rsrc->evq.event_q_id)
+ rte_exit(EXIT_FAILURE, "Memory allocation failure");
+
+ rte_event_queue_default_conf_get(event_d_id, 0, &def_q_conf);
+ if (def_q_conf.nb_atomic_flows < event_q_conf.nb_atomic_flows)
+ event_q_conf.nb_atomic_flows = def_q_conf.nb_atomic_flows;
+
+ for (event_q_id = 0; event_q_id < (event_rsrc->evq.nb_queues - 1);
+ event_q_id++) {
+ ret = rte_event_queue_setup(event_d_id, event_q_id,
+ &event_q_conf);
+ if (ret < 0) {
+ rte_exit(EXIT_FAILURE,
+ "Error in configuring event queue");
+ }
+ event_rsrc->evq.event_q_id[event_q_id] = event_q_id;
+ }
+
+ event_q_conf.event_queue_cfg |= RTE_EVENT_QUEUE_CFG_SINGLE_LINK;
+ event_q_conf.priority = RTE_EVENT_DEV_PRIORITY_HIGHEST,
+ ret = rte_event_queue_setup(event_d_id, event_q_id, &event_q_conf);
+ if (ret < 0) {
+ rte_exit(EXIT_FAILURE,
+ "Error in configuring event queue for Tx adapter");
+ }
+ event_rsrc->evq.event_q_id[event_q_id] = event_q_id;
+}
+
void
l2fwd_event_set_generic_ops(struct event_setup_ops *ops)
{
ops->event_device_setup = l2fwd_event_device_setup_generic;
+ ops->event_queue_setup = l2fwd_event_queue_setup_generic;
+ ops->event_port_setup = l2fwd_event_port_setup_generic;
}
diff --git a/examples/l2fwd-event/l2fwd_event_internal_port.c b/examples/l2fwd-event/l2fwd_event_internal_port.c
index f95b1762a..6e3c1da5b 100644
--- a/examples/l2fwd-event/l2fwd_event_internal_port.c
+++ b/examples/l2fwd-event/l2fwd_event_internal_port.c
@@ -91,8 +91,114 @@ l2fwd_event_device_setup_internal_port(struct l2fwd_resources *l2fwd_rsrc)
return event_queue_cfg;
}
+static void
+l2fwd_event_port_setup_internal_port(struct l2fwd_resources *l2fwd_rsrc)
+{
+ struct l2fwd_event_resources *event_rsrc = l2fwd_rsrc->event_rsrc;
+ uint8_t event_d_id = event_rsrc->event_d_id;
+ struct rte_event_port_conf event_p_conf = {
+ .dequeue_depth = 32,
+ .enqueue_depth = 32,
+ .new_event_threshold = 4096
+ };
+ struct rte_event_port_conf def_p_conf;
+ uint8_t event_p_id;
+ int32_t ret;
+
+ event_rsrc->evp.event_p_id = (uint8_t *)malloc(sizeof(uint8_t) *
+ event_rsrc->evp.nb_ports);
+ if (!event_rsrc->evp.event_p_id)
+ rte_exit(EXIT_FAILURE,
+ "Failed to allocate memory for Event Ports");
+
+ rte_event_port_default_conf_get(event_d_id, 0, &def_p_conf);
+ if (def_p_conf.new_event_threshold < event_p_conf.new_event_threshold)
+ event_p_conf.new_event_threshold =
+ def_p_conf.new_event_threshold;
+
+ if (def_p_conf.dequeue_depth < event_p_conf.dequeue_depth)
+ event_p_conf.dequeue_depth = def_p_conf.dequeue_depth;
+
+ if (def_p_conf.enqueue_depth < event_p_conf.enqueue_depth)
+ event_p_conf.enqueue_depth = def_p_conf.enqueue_depth;
+
+ event_p_conf.disable_implicit_release =
+ event_rsrc->disable_implicit_release;
+
+ for (event_p_id = 0; event_p_id < event_rsrc->evp.nb_ports;
+ event_p_id++) {
+ ret = rte_event_port_setup(event_d_id, event_p_id,
+ &event_p_conf);
+ if (ret < 0) {
+ rte_exit(EXIT_FAILURE,
+ "Error in configuring event port %d\n",
+ event_p_id);
+ }
+
+ ret = rte_event_port_link(event_d_id, event_p_id, NULL,
+ NULL, 0);
+ if (ret < 0) {
+ rte_exit(EXIT_FAILURE, "Error in linking event port %d "
+ "to event queue", event_p_id);
+ }
+ event_rsrc->evp.event_p_id[event_p_id] = event_p_id;
+
+ /* init spinlock */
+ rte_spinlock_init(&event_rsrc->evp.lock);
+ }
+
+ event_rsrc->def_p_conf = event_p_conf;
+}
+
+static void
+l2fwd_event_queue_setup_internal_port(struct l2fwd_resources *l2fwd_rsrc,
+ uint32_t event_queue_cfg)
+{
+ struct l2fwd_event_resources *event_rsrc = l2fwd_rsrc->event_rsrc;
+ uint8_t event_d_id = event_rsrc->event_d_id;
+ struct rte_event_queue_conf event_q_conf = {
+ .nb_atomic_flows = 1024,
+ .nb_atomic_order_sequences = 1024,
+ .event_queue_cfg = event_queue_cfg,
+ .priority = RTE_EVENT_DEV_PRIORITY_NORMAL
+ };
+ struct rte_event_queue_conf def_q_conf;
+ uint8_t event_q_id = 0;
+ int32_t ret;
+
+ rte_event_queue_default_conf_get(event_d_id, event_q_id, &def_q_conf);
+
+ if (def_q_conf.nb_atomic_flows < event_q_conf.nb_atomic_flows)
+ event_q_conf.nb_atomic_flows = def_q_conf.nb_atomic_flows;
+
+ if (def_q_conf.nb_atomic_order_sequences <
+ event_q_conf.nb_atomic_order_sequences)
+ event_q_conf.nb_atomic_order_sequences =
+ def_q_conf.nb_atomic_order_sequences;
+
+ event_q_conf.event_queue_cfg = event_queue_cfg;
+ event_q_conf.schedule_type = l2fwd_rsrc->sched_type;
+ event_rsrc->evq.event_q_id = (uint8_t *)malloc(sizeof(uint8_t) *
+ event_rsrc->evq.nb_queues);
+ if (!event_rsrc->evq.event_q_id)
+ rte_exit(EXIT_FAILURE, "Memory allocation failure");
+
+ for (event_q_id = 0; event_q_id < event_rsrc->evq.nb_queues;
+ event_q_id++) {
+ ret = rte_event_queue_setup(event_d_id, event_q_id,
+ &event_q_conf);
+ if (ret < 0) {
+ rte_exit(EXIT_FAILURE,
+ "Error in configuring event queue");
+ }
+ event_rsrc->evq.event_q_id[event_q_id] = event_q_id;
+ }
+}
+
void
l2fwd_event_set_internal_port_ops(struct event_setup_ops *ops)
{
ops->event_device_setup = l2fwd_event_device_setup_internal_port;
+ ops->event_queue_setup = l2fwd_event_queue_setup_internal_port;
+ ops->event_port_setup = l2fwd_event_port_setup_internal_port;
}
--
2.17.1
next prev parent reply other threads:[~2019-10-02 20:58 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-19 9:25 [dpdk-dev] [PATCH v2 00/10] example/l2fwd-event: introduce l2fwd-event example pbhagavatula
2019-09-19 9:25 ` [dpdk-dev] [PATCH v2 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-09-19 9:43 ` Sunil Kumar Kori
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 00/10] example/l2fwd-event: introduce l2fwd-event example pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 04/10] examples/l2fwd-event: add eth port setup for eventdev pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-09-19 10:35 ` Sunil Kumar Kori
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
2019-09-19 10:13 ` [dpdk-dev] [PATCH v3 10/10] doc: add application usage guide for l2fwd-event pbhagavatula
2019-09-24 9:41 ` [dpdk-dev] [PATCH v4 00/10] example/l2fwd-event: introduce l2fwd-event example pbhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-09-26 17:28 ` Jerin Jacob
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-09-26 17:33 ` Jerin Jacob
2019-09-27 13:08 ` Nipun Gupta
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 04/10] examples/l2fwd-event: add eth port setup for eventdev pbhagavatula
2019-09-27 13:15 ` Nipun Gupta
2019-09-27 14:45 ` Pavan Nikhilesh Bhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-09-27 13:22 ` Nipun Gupta
2019-09-27 14:43 ` Pavan Nikhilesh Bhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-09-27 13:28 ` Nipun Gupta
2019-09-27 14:35 ` Pavan Nikhilesh Bhagavatula
2019-09-30 5:38 ` Nipun Gupta
2019-09-30 6:38 ` Jerin Jacob
2019-09-30 7:46 ` Nipun Gupta
2019-09-30 8:09 ` Pavan Nikhilesh Bhagavatula
2019-09-30 17:50 ` Nipun Gupta
2019-10-01 5:59 ` Pavan Nikhilesh Bhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
2019-09-24 9:42 ` [dpdk-dev] [PATCH v4 10/10] doc: add application usage guide for l2fwd-event pbhagavatula
2019-09-26 17:42 ` Jerin Jacob
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 00/10] example/l2fwd-event: introduce l2fwd-event example pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-10-11 14:41 ` Jerin Jacob
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-10-04 12:30 ` Nipun Gupta
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 04/10] examples/l2fwd-event: add event device setup pbhagavatula
2019-10-02 20:57 ` pbhagavatula [this message]
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-10-11 14:52 ` Jerin Jacob
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
2019-10-02 20:57 ` [dpdk-dev] [PATCH v5 10/10] doc: add application usage guide for l2fwd-event pbhagavatula
2019-10-11 14:11 ` Jerin Jacob
2019-10-03 10:33 ` [dpdk-dev] [PATCH v5 00/10] example/l2fwd-event: introduce l2fwd-event example Jerin Jacob
2019-10-03 12:40 ` Hemant Agrawal
2019-10-03 12:47 ` Jerin Jacob
2019-10-09 7:50 ` Nipun Gupta
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 " pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-10-16 19:07 ` Stephen Hemminger
2019-10-21 3:29 ` Varghese, Vipin
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 04/10] examples/l2fwd-event: add event device setup pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-10-21 3:19 ` Varghese, Vipin
2019-10-21 16:53 ` Pavan Nikhilesh Bhagavatula
2019-10-22 3:13 ` Varghese, Vipin
2019-10-22 17:02 ` Pavan Nikhilesh Bhagavatula
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
2019-10-21 3:12 ` Varghese, Vipin
2019-10-21 16:56 ` Pavan Nikhilesh Bhagavatula
2019-10-22 2:48 ` Varghese, Vipin
2019-10-14 18:22 ` [dpdk-dev] [PATCH v6 10/10] doc: add application usage guide for l2fwd-event pbhagavatula
2019-10-16 12:38 ` [dpdk-dev] [PATCH v6 00/10] example/l2fwd-event: introduce l2fwd-event example Jerin Jacob
2019-10-21 3:25 ` Varghese, Vipin
2019-10-21 17:02 ` Pavan Nikhilesh Bhagavatula
2019-10-22 2:57 ` Varghese, Vipin
2019-10-22 15:55 ` Pavan Nikhilesh Bhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 " pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 01/10] examples/l2fwd-event: add default poll mode routines pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 04/10] examples/l2fwd-event: add event device setup pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
2019-10-26 11:10 ` [dpdk-dev] [PATCH v7 10/10] doc: add application usage guide for l2fwd-event pbhagavatula
2019-10-30 13:19 ` Jerin Jacob
2019-10-30 12:58 ` [dpdk-dev] [PATCH v7 00/10] example/l2fwd-event: introduce l2fwd-event example Jerin Jacob
2019-09-19 9:25 ` [dpdk-dev] [PATCH v2 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-09-19 9:25 ` [dpdk-dev] [PATCH v2 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-09-19 9:25 ` [dpdk-dev] [PATCH v2 04/10] examples/l2fwd-event: add eth port setup for eventdev pbhagavatula
2019-09-19 9:25 ` [dpdk-dev] [PATCH v2 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-09-19 9:26 ` [dpdk-dev] [PATCH v2 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-09-19 9:26 ` [dpdk-dev] [PATCH v2 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-09-19 9:26 ` [dpdk-dev] [PATCH v2 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-09-19 9:26 ` [dpdk-dev] [PATCH v2 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191002205754.11746-6-pbhagavatula@marvell.com \
--to=pbhagavatula@marvell.com \
--cc=akhil.goyal@nxp.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=marko.kovacevic@intel.com \
--cc=orika@mellanox.com \
--cc=radu.nicolau@intel.com \
--cc=skori@marvell.com \
--cc=tomasz.kantecki@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).