From: Ajit Khaparde <ajit.khaparde@broadcom.com>
To: dev@dpdk.org
Cc: ferruh.yigit@intel.com, Rahul Gupta <rahul.gupta@broadcom.com>,
Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>,
Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Subject: [dpdk-dev] [PATCH v2 20/20] net/bnxt: handle flow flush handling
Date: Wed, 2 Oct 2019 16:26:01 -0700 [thread overview]
Message-ID: <20191002232601.22715-21-ajit.khaparde@broadcom.com> (raw)
In-Reply-To: <20191002232601.22715-1-ajit.khaparde@broadcom.com>
We are not freeing all the flows when a flow_flush is called.
Iterate through all the flows belonging to all the VNICs in use and
free the filters.
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_flow.c | 63 ++++++++++++++++++------------------
1 file changed, 32 insertions(+), 31 deletions(-)
diff --git a/drivers/net/bnxt/bnxt_flow.c b/drivers/net/bnxt/bnxt_flow.c
index 9c27f751a8..2653ce9761 100644
--- a/drivers/net/bnxt/bnxt_flow.c
+++ b/drivers/net/bnxt/bnxt_flow.c
@@ -1161,7 +1161,7 @@ bnxt_validate_and_parse_flow(struct rte_eth_dev *dev,
RTE_FLOW_ERROR_TYPE_ACTION,
act,
"Filter not available");
- rc = -ENOSPC;
+ rc = -rte_errno;
goto ret;
}
@@ -1172,7 +1172,7 @@ bnxt_validate_and_parse_flow(struct rte_eth_dev *dev,
filter->flags =
HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DROP;
- bnxt_update_filter_flags_en(filter, filter1);
+ bnxt_update_filter_flags_en(filter, filter1, use_ntuple);
break;
case RTE_FLOW_ACTION_TYPE_COUNT:
vnic0 = &bp->vnic_info[0];
@@ -1251,7 +1251,7 @@ bnxt_validate_and_parse_flow(struct rte_eth_dev *dev,
RTE_FLOW_ERROR_TYPE_ACTION,
act,
"New filter not available");
- rc = -ENOSPC;
+ rc = -rte_errno;
goto ret;
}
@@ -1415,7 +1415,7 @@ bnxt_validate_and_parse_flow(struct rte_eth_dev *dev,
RTE_FLOW_ERROR_TYPE_ACTION,
act,
"New filter not available");
- rc = -ENOSPC;
+ rc = -rte_errno;
goto ret;
}
@@ -1520,7 +1520,6 @@ bnxt_flow_validate(struct rte_eth_dev *dev,
bnxt_hwrm_vnic_ctx_free(bp, vnic);
bnxt_hwrm_vnic_free(bp, vnic);
vnic->rx_queue_cnt = 0;
- bp->nr_vnics--;
PMD_DRV_LOG(DEBUG, "Free VNIC\n");
}
}
@@ -1753,36 +1752,20 @@ bnxt_flow_create(struct rte_eth_dev *dev,
vnic = find_matching_vnic(bp, filter);
done:
if (!ret || update_flow) {
- flow->filter = filter;
- flow->vnic = vnic;
- /* VNIC is set only in case of queue or RSS action */
- if (vnic) {
- /*
- * RxQ0 is not used for flow filters.
- */
-
- if (update_flow) {
- ret = -EXDEV;
- goto free_flow;
- }
- STAILQ_INSERT_TAIL(&vnic->filter, filter, next);
- }
- PMD_DRV_LOG(ERR, "Successfully created flow.\n");
- STAILQ_INSERT_TAIL(&vnic->flow_list, flow, next);
- bnxt_release_flow_lock(bp);
- return flow;
- }
- if (!ret) {
flow->filter = filter;
flow->vnic = vnic;
if (update_flow) {
ret = -EXDEV;
goto free_flow;
}
+
+ STAILQ_INSERT_TAIL(&vnic->filter, filter, next);
PMD_DRV_LOG(ERR, "Successfully created flow.\n");
STAILQ_INSERT_TAIL(&vnic->flow_list, flow, next);
+ bnxt_release_flow_lock(bp);
return flow;
}
+
free_filter:
bnxt_free_filter(bp, filter);
free_flow:
@@ -1925,7 +1908,6 @@ bnxt_flow_destroy(struct rte_eth_dev *dev,
bnxt_hwrm_vnic_free(bp, vnic);
vnic->rx_queue_cnt = 0;
- bp->nr_vnics--;
}
} else {
rte_flow_error_set(error, -ret,
@@ -1941,6 +1923,7 @@ static int
bnxt_flow_flush(struct rte_eth_dev *dev, struct rte_flow_error *error)
{
struct bnxt *bp = dev->data->dev_private;
+ struct bnxt_filter_info *filter = NULL;
struct bnxt_vnic_info *vnic;
struct rte_flow *flow;
unsigned int i;
@@ -1949,11 +1932,12 @@ bnxt_flow_flush(struct rte_eth_dev *dev, struct rte_flow_error *error)
bnxt_acquire_flow_lock(bp);
for (i = 0; i < bp->max_vnics; i++) {
vnic = &bp->vnic_info[i];
- if (vnic->fw_vnic_id == INVALID_VNIC_ID)
+ if (vnic && vnic->fw_vnic_id == INVALID_VNIC_ID)
continue;
- STAILQ_FOREACH(flow, &vnic->flow_list, next) {
- struct bnxt_filter_info *filter = flow->filter;
+ while (!STAILQ_EMPTY(&vnic->flow_list)) {
+ flow = STAILQ_FIRST(&vnic->flow_list);
+ filter = flow->filter;
if (filter->filter_type ==
HWRM_CFA_TUNNEL_REDIRECT_FILTER &&
@@ -1974,7 +1958,7 @@ bnxt_flow_flush(struct rte_eth_dev *dev, struct rte_flow_error *error)
ret = bnxt_hwrm_clear_em_filter(bp, filter);
if (filter->filter_type == HWRM_CFA_NTUPLE_FILTER)
ret = bnxt_hwrm_clear_ntuple_filter(bp, filter);
- else if (!i)
+ else if (i)
ret = bnxt_hwrm_clear_l2_filter(bp, filter);
if (ret) {
@@ -1988,10 +1972,27 @@ bnxt_flow_flush(struct rte_eth_dev *dev, struct rte_flow_error *error)
return -rte_errno;
}
done:
- bnxt_free_filter(bp, filter);
STAILQ_REMOVE(&vnic->flow_list, flow,
rte_flow, next);
+
+ STAILQ_REMOVE(&vnic->filter,
+ filter,
+ bnxt_filter_info,
+ next);
+ bnxt_free_filter(bp, filter);
+
rte_free(flow);
+
+ /* If this was the last flow associated with this vnic,
+ * switch the queue back to RSS pool.
+ */
+ if (STAILQ_EMPTY(&vnic->flow_list)) {
+ rte_free(vnic->fw_grp_ids);
+ if (vnic->rx_queue_cnt > 1)
+ bnxt_hwrm_vnic_ctx_free(bp, vnic);
+ bnxt_hwrm_vnic_free(bp, vnic);
+ vnic->rx_queue_cnt = 0;
+ }
}
}
--
2.20.1 (Apple Git-117)
next prev parent reply other threads:[~2019-10-02 23:29 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-02 23:25 [dpdk-dev] [PATCH v2 00/20] bnxt patchset to improve rte flow support Ajit Khaparde
2019-10-02 23:25 ` [dpdk-dev] [PATCH v2 01/20] net/bnxt: return standard error codes for HWRM command Ajit Khaparde
2019-10-02 23:25 ` [dpdk-dev] [PATCH v2 02/20] net/bnxt: refactor code to allow dynamic creation of VNIC Ajit Khaparde
2019-10-02 23:25 ` [dpdk-dev] [PATCH v2 03/20] net/bnxt: allow flow creation when RSS is enabled Ajit Khaparde
2019-10-02 23:25 ` [dpdk-dev] [PATCH v2 04/20] net/bnxt: add support to create SMAC and inner DMAC filters Ajit Khaparde
2019-10-02 23:25 ` [dpdk-dev] [PATCH v2 05/20] net/bnxt: add support for RSS action Ajit Khaparde
2019-10-02 23:25 ` [dpdk-dev] [PATCH v2 06/20] net/bnxt: parse priority attribute for flow creation Ajit Khaparde
2019-10-02 23:25 ` [dpdk-dev] [PATCH v2 07/20] net/bnxt: delete and flush L2 filters cleanly Ajit Khaparde
2019-10-02 23:25 ` [dpdk-dev] [PATCH v2 08/20] net/bnxt: cleanup vnic after flow validate Ajit Khaparde
2019-10-02 23:25 ` [dpdk-dev] [PATCH v2 09/20] net/bnxt: fix an issue in setting default MAC address Ajit Khaparde
2019-10-02 23:25 ` [dpdk-dev] [PATCH v2 10/20] net/bnxt: allow only unicast MAC address filter creation Ajit Khaparde
2019-10-02 23:25 ` [dpdk-dev] [PATCH v2 11/20] net/bnxt: properly handle ring cleanup in case of error Ajit Khaparde
2019-10-02 23:25 ` [dpdk-dev] [PATCH v2 12/20] net/bnxt: check device is started before flow creation Ajit Khaparde
2019-10-02 23:25 ` [dpdk-dev] [PATCH v2 13/20] net/bnxt: check for invalid VNIC ID in vnic tpa cfg Ajit Khaparde
2019-10-02 23:25 ` [dpdk-dev] [PATCH v2 14/20] net/bnxt: validate RSS hash key length Ajit Khaparde
2019-10-02 23:25 ` [dpdk-dev] [PATCH v2 15/20] net/bnxt: handle cleanup if flow creation fails Ajit Khaparde
2019-10-02 23:25 ` [dpdk-dev] [PATCH v2 16/20] net/bnxt: synchronize between flow related functions Ajit Khaparde
2019-10-02 23:25 ` [dpdk-dev] [PATCH v2 17/20] net/bnxt: drop untagged frames when specified Ajit Khaparde
2019-10-03 13:17 ` Ferruh Yigit
2019-10-02 23:25 ` [dpdk-dev] [PATCH v2 18/20] net/bnxt: fix VLAN filtering code path Ajit Khaparde
2019-10-02 23:26 ` [dpdk-dev] [PATCH v2 19/20] net/bnxt: fix multicast filter programming Ajit Khaparde
2019-10-02 23:26 ` Ajit Khaparde [this message]
2019-10-03 12:39 ` [dpdk-dev] [PATCH v2 20/20] net/bnxt: handle flow flush handling Ferruh Yigit
2019-10-03 13:18 ` [dpdk-dev] [PATCH v2 00/20] bnxt patchset to improve rte flow support Ferruh Yigit
2019-10-03 14:29 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191002232601.22715-21-ajit.khaparde@broadcom.com \
--to=ajit.khaparde@broadcom.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=kalesh-anakkur.purayil@broadcom.com \
--cc=rahul.gupta@broadcom.com \
--cc=venkatkumar.duvvuru@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).