From: Akhil Goyal <akhil.goyal@nxp.com>
To: dev@dpdk.org
Cc: jerinj@marvell.com, hemant.agrawal@nxp.com, anoobj@marvell.com,
Akhil Goyal <akhil.goyal@nxp.com>
Subject: [dpdk-dev] [PATCH v3 2/2] event/dpaa: support event crypto adapter
Date: Fri, 4 Oct 2019 16:56:59 +0530 [thread overview]
Message-ID: <20191004112659.32394-3-akhil.goyal@nxp.com> (raw)
In-Reply-To: <20191004112659.32394-1-akhil.goyal@nxp.com>
event dpaa device support both ethernet as well as
crypto queues to be attached to it. eth_rx_adapter
provide infrastructure to attach ethernet queues and
crypto_adapter provide support for crypto queues.
This patch add support for dpaa_eventdev to attach
dpaa_sec queues.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
---
drivers/event/dpaa/Makefile | 3 +
drivers/event/dpaa/dpaa_eventdev.c | 154 ++++++++++++++++++++++++++++-
drivers/event/dpaa/dpaa_eventdev.h | 5 +
drivers/event/dpaa/meson.build | 3 +-
4 files changed, 163 insertions(+), 2 deletions(-)
diff --git a/drivers/event/dpaa/Makefile b/drivers/event/dpaa/Makefile
index cf9626495..1856fa468 100644
--- a/drivers/event/dpaa/Makefile
+++ b/drivers/event/dpaa/Makefile
@@ -21,6 +21,9 @@ CFLAGS += -I$(RTE_SDK)/drivers/bus/dpaa/include/
CFLAGS += -I$(RTE_SDK)/drivers/mempool/dpaa
CFLAGS += -I$(RTE_SDK)/lib/librte_eal/common/include
+LDLIBS += -lrte_pmd_dpaa_sec
+CFLAGS += -I$(RTE_SDK)/drivers/crypto/dpaa_sec
+
EXPORT_MAP := rte_pmd_dpaa_event_version.map
LIBABIVER := 1
diff --git a/drivers/event/dpaa/dpaa_eventdev.c b/drivers/event/dpaa/dpaa_eventdev.c
index 1e247e4f4..d02b8694e 100644
--- a/drivers/event/dpaa/dpaa_eventdev.c
+++ b/drivers/event/dpaa/dpaa_eventdev.c
@@ -27,12 +27,14 @@
#include <rte_eventdev_pmd_vdev.h>
#include <rte_ethdev.h>
#include <rte_event_eth_rx_adapter.h>
+#include <rte_cryptodev.h>
#include <rte_dpaa_bus.h>
#include <rte_dpaa_logs.h>
#include <rte_cycles.h>
#include <rte_kvargs.h>
#include <dpaa_ethdev.h>
+#include <dpaa_sec_event.h>
#include "dpaa_eventdev.h"
#include <dpaa_mempool.h>
@@ -322,7 +324,7 @@ dpaa_event_dev_info_get(struct rte_eventdev *dev,
EVENTDEV_INIT_FUNC_TRACE();
RTE_SET_USED(dev);
- dev_info->driver_name = "event_dpaa";
+ dev_info->driver_name = "event_dpaa1";
dev_info->min_dequeue_timeout_ns =
DPAA_EVENT_MIN_DEQUEUE_TIMEOUT;
dev_info->max_dequeue_timeout_ns =
@@ -718,6 +720,149 @@ dpaa_event_eth_rx_adapter_stop(const struct rte_eventdev *dev,
return 0;
}
+static int
+dpaa_eventdev_crypto_caps_get(const struct rte_eventdev *dev,
+ const struct rte_cryptodev *cdev,
+ uint32_t *caps)
+{
+ const char *name = cdev->data->name;
+
+ EVENTDEV_INIT_FUNC_TRACE();
+
+ RTE_SET_USED(dev);
+
+ if (!strncmp(name, "dpaa_sec-", 9))
+ *caps = RTE_EVENT_CRYPTO_ADAPTER_DPAA_CAP;
+ else
+ return -1;
+
+ return 0;
+}
+
+static int
+dpaa_eventdev_crypto_queue_add_all(const struct rte_eventdev *dev,
+ const struct rte_cryptodev *cryptodev,
+ const struct rte_event *ev)
+{
+ struct dpaa_eventdev *priv = dev->data->dev_private;
+ uint8_t ev_qid = ev->queue_id;
+ u16 ch_id = priv->evq_info[ev_qid].ch_id;
+ int i, ret;
+
+ EVENTDEV_INIT_FUNC_TRACE();
+
+ for (i = 0; i < cryptodev->data->nb_queue_pairs; i++) {
+ ret = dpaa_sec_eventq_attach(cryptodev, i,
+ ch_id, ev);
+ if (ret) {
+ DPAA_EVENTDEV_ERR("dpaa_sec_eventq_attach failed: ret %d\n",
+ ret);
+ goto fail;
+ }
+ }
+ return 0;
+fail:
+ for (i = (i - 1); i >= 0 ; i--)
+ dpaa_sec_eventq_detach(cryptodev, i);
+
+ return ret;
+}
+
+static int
+dpaa_eventdev_crypto_queue_add(const struct rte_eventdev *dev,
+ const struct rte_cryptodev *cryptodev,
+ int32_t rx_queue_id,
+ const struct rte_event *ev)
+{
+ struct dpaa_eventdev *priv = dev->data->dev_private;
+ uint8_t ev_qid = ev->queue_id;
+ u16 ch_id = priv->evq_info[ev_qid].ch_id;
+ int ret;
+
+ EVENTDEV_INIT_FUNC_TRACE();
+
+ if (rx_queue_id == -1)
+ return dpaa_eventdev_crypto_queue_add_all(dev,
+ cryptodev, ev);
+
+ ret = dpaa_sec_eventq_attach(cryptodev, rx_queue_id,
+ ch_id, ev);
+ if (ret) {
+ DPAA_EVENTDEV_ERR(
+ "dpaa_sec_eventq_attach failed: ret: %d\n", ret);
+ return ret;
+ }
+ return 0;
+}
+
+static int
+dpaa_eventdev_crypto_queue_del_all(const struct rte_eventdev *dev,
+ const struct rte_cryptodev *cdev)
+{
+ int i, ret;
+
+ EVENTDEV_INIT_FUNC_TRACE();
+
+ RTE_SET_USED(dev);
+
+ for (i = 0; i < cdev->data->nb_queue_pairs; i++) {
+ ret = dpaa_sec_eventq_detach(cdev, i);
+ if (ret) {
+ DPAA_EVENTDEV_ERR(
+ "dpaa_sec_eventq_detach failed:ret %d\n", ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int
+dpaa_eventdev_crypto_queue_del(const struct rte_eventdev *dev,
+ const struct rte_cryptodev *cryptodev,
+ int32_t rx_queue_id)
+{
+ int ret;
+
+ EVENTDEV_INIT_FUNC_TRACE();
+
+ if (rx_queue_id == -1)
+ return dpaa_eventdev_crypto_queue_del_all(dev, cryptodev);
+
+ ret = dpaa_sec_eventq_detach(cryptodev, rx_queue_id);
+ if (ret) {
+ DPAA_EVENTDEV_ERR(
+ "dpaa_sec_eventq_detach failed: ret: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int
+dpaa_eventdev_crypto_start(const struct rte_eventdev *dev,
+ const struct rte_cryptodev *cryptodev)
+{
+ EVENTDEV_INIT_FUNC_TRACE();
+
+ RTE_SET_USED(dev);
+ RTE_SET_USED(cryptodev);
+
+ return 0;
+}
+
+static int
+dpaa_eventdev_crypto_stop(const struct rte_eventdev *dev,
+ const struct rte_cryptodev *cryptodev)
+{
+ EVENTDEV_INIT_FUNC_TRACE();
+
+ RTE_SET_USED(dev);
+ RTE_SET_USED(cryptodev);
+
+ return 0;
+}
+
static struct rte_eventdev_ops dpaa_eventdev_ops = {
.dev_infos_get = dpaa_event_dev_info_get,
.dev_configure = dpaa_event_dev_configure,
@@ -738,6 +883,11 @@ static struct rte_eventdev_ops dpaa_eventdev_ops = {
.eth_rx_adapter_queue_del = dpaa_event_eth_rx_adapter_queue_del,
.eth_rx_adapter_start = dpaa_event_eth_rx_adapter_start,
.eth_rx_adapter_stop = dpaa_event_eth_rx_adapter_stop,
+ .crypto_adapter_caps_get = dpaa_eventdev_crypto_caps_get,
+ .crypto_adapter_queue_pair_add = dpaa_eventdev_crypto_queue_add,
+ .crypto_adapter_queue_pair_del = dpaa_eventdev_crypto_queue_del,
+ .crypto_adapter_start = dpaa_eventdev_crypto_start,
+ .crypto_adapter_stop = dpaa_eventdev_crypto_stop,
};
static int flag_check_handler(__rte_unused const char *key,
@@ -806,6 +956,8 @@ dpaa_event_dev_create(const char *name, const char *params)
eventdev->dequeue_burst = dpaa_event_dequeue_burst_intr;
}
+ RTE_LOG(INFO, PMD, "%s eventdev added", name);
+
/* For secondary processes, the primary has done all the work */
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return 0;
diff --git a/drivers/event/dpaa/dpaa_eventdev.h b/drivers/event/dpaa/dpaa_eventdev.h
index 8134e6ba9..b8f247c61 100644
--- a/drivers/event/dpaa/dpaa_eventdev.h
+++ b/drivers/event/dpaa/dpaa_eventdev.h
@@ -40,6 +40,11 @@ do { \
RTE_EVENT_ETH_RX_ADAPTER_CAP_MULTI_EVENTQ | \
RTE_EVENT_ETH_RX_ADAPTER_CAP_OVERRIDE_FLOW_ID)
+#define RTE_EVENT_CRYPTO_ADAPTER_DPAA_CAP \
+ (RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_OP_NEW | \
+ RTE_EVENT_CRYPTO_ADAPTER_CAP_INTERNAL_PORT_QP_EV_BIND | \
+ RTE_EVENT_CRYPTO_ADAPTER_CAP_SESSION_PRIVATE_DATA)
+
struct dpaa_eventq {
/* Channel Id */
uint16_t ch_id;
diff --git a/drivers/event/dpaa/meson.build b/drivers/event/dpaa/meson.build
index c1e725475..b74f3bf32 100644
--- a/drivers/event/dpaa/meson.build
+++ b/drivers/event/dpaa/meson.build
@@ -5,7 +5,8 @@ if not is_linux
build = false
reason = 'only supported on linux'
endif
-deps += ['pmd_dpaa']
+deps += ['pmd_dpaa', 'pmd_dpaa_sec']
sources = files('dpaa_eventdev.c')
allow_experimental_apis = true
+includes += include_directories('../../crypto/dpaa_sec/')
--
2.17.1
next prev parent reply other threads:[~2019-10-04 11:42 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-06 13:12 [dpdk-dev] [PATCH 1/2] crypto/dpaa_sec: " Akhil Goyal
2019-09-06 13:12 ` [dpdk-dev] [PATCH 2/2] event/dpaa: " Akhil Goyal
2019-09-26 17:59 ` Jerin Jacob
2019-09-30 14:53 ` [dpdk-dev] [PATCH 1/2] crypto/dpaa_sec: " Jerin Jacob
2019-09-30 20:13 ` Akhil Goyal
2019-10-01 3:11 ` Jerin Jacob
2019-10-01 6:31 ` Akhil Goyal
2019-10-01 13:15 ` Jerin Jacob
2019-09-30 19:13 ` [dpdk-dev] [PATCH v2 0/2] dpaa_sec: " Akhil Goyal
2019-09-30 19:13 ` [dpdk-dev] [PATCH v2 1/2] crypto/dpaa_sec: " Akhil Goyal
2019-09-30 19:13 ` [dpdk-dev] [PATCH v2 2/2] event/dpaa: " Akhil Goyal
2019-10-04 11:26 ` [dpdk-dev] [PATCH v3 0/2] dpaa_sec: " Akhil Goyal
2019-10-04 11:26 ` [dpdk-dev] [PATCH v3 1/2] crypto/dpaa_sec: " Akhil Goyal
2019-10-04 11:26 ` Akhil Goyal [this message]
2019-10-09 12:10 ` [dpdk-dev] [PATCH v3 0/2] dpaa_sec: " Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191004112659.32394-3-akhil.goyal@nxp.com \
--to=akhil.goyal@nxp.com \
--cc=anoobj@marvell.com \
--cc=dev@dpdk.org \
--cc=hemant.agrawal@nxp.com \
--cc=jerinj@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).