From: "Morten Brørup" <mb@smartsharesystems.com>
To: dev@dpdk.org
Cc: olivier.matz@6wind.com, stephen@networkplumber.org,
harry.van.haaren@intel.com, konstantin.ananyev@intel.com,
mattias.ronnblom@ericsson.com, bruce.richardson@intel.com,
arybchenko@solarflare.com,
"Morten Brørup" <mb@smartsharesystems.com>
Subject: [dpdk-dev] [PATCH v8 1/2] mbuf: add bulk free function
Date: Fri, 11 Oct 2019 12:14:57 +0000 [thread overview]
Message-ID: <20191011121458.56388-2-mb@smartsharesystems.com> (raw)
In-Reply-To: <20191011121458.56388-1-mb@smartsharesystems.com>
Add function for freeing a bulk of mbufs.
Signed-off-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
---
v8:
* Add unit test, covering both bulk alloc and bulk free.
v7:
* Squash multiple modifications into one.
v6:
* Remove __rte_always_inline from static function.
The compiler will inline anyway.
v5:
* Rename variables from "free" to "pending" for improved readability.
* Add prefix __ to rte_pktmbuf_free_seg_via_array().
* Add array size parameter to __rte_pktmbuf_free_seg_via_array().
The compiler will optimize the parameter away anyway.
* Add description to __rte_pktmbuf_free_seg_via_array().
* Minor description updates.
v4:
* Mark as experimental by adding __rte_experimental.
* Add function to experimental section of map file.
* Fix source code formatting regarding pointer to pointer.
* Squash multiple modifications into one.
v3:
* Bugfix: Handle pakets with multiple segments.
* Add inline helper function, mainly for readability.
* Fix source code formatting regarding indentation.
v2:
* Function is not inline.
* Optimize to free multible mbufs belonging to the same mempool in
bulk. Inspired by ixgbe_tx_free_bufs(), but allowing NULL pointers
in the array, just like rte_pktmbuf_free() can take a NULL pointer.
* Use unsigned int instead of unsigned. Passes checkpatch, but
mismatches the original coding style of the modified files.
* Fix a typo in the description headline: mempools is plural.
---
lib/librte_mbuf/rte_mbuf.c | 66 ++++++++++++++++++++++++++++
lib/librte_mbuf/rte_mbuf.h | 15 +++++++
lib/librte_mbuf/rte_mbuf_version.map | 1 +
3 files changed, 82 insertions(+)
diff --git a/lib/librte_mbuf/rte_mbuf.c b/lib/librte_mbuf/rte_mbuf.c
index 37718d49c..854af1104 100644
--- a/lib/librte_mbuf/rte_mbuf.c
+++ b/lib/librte_mbuf/rte_mbuf.c
@@ -245,6 +245,72 @@ int rte_mbuf_check(const struct rte_mbuf *m, int is_header,
return 0;
}
+/**
+ * @internal helper function for freeing a bulk of packet mbuf segments
+ * via an array holding the packet mbuf segments from the same mempool
+ * pending to be freed.
+ *
+ * @param m
+ * The packet mbuf segment to be freed.
+ * @param pending
+ * Pointer to the array of packet mbuf segments pending to be freed.
+ * @param nb_pending
+ * Pointer to the number of elements held in the array.
+ * @param pending_sz
+ * Number of elements the array can hold.
+ * Note: The compiler should optimize this parameter away when using a
+ * constant value, such as RTE_PKTMBUF_FREE_PENDING_SZ.
+ */
+static void
+__rte_pktmbuf_free_seg_via_array(struct rte_mbuf *m,
+ struct rte_mbuf ** const pending, unsigned int * const nb_pending,
+ const unsigned int pending_sz)
+{
+ m = rte_pktmbuf_prefree_seg(m);
+ if (likely(m != NULL)) {
+ if (*nb_pending == pending_sz ||
+ (*nb_pending > 0 && m->pool != pending[0]->pool)) {
+ rte_mempool_put_bulk(pending[0]->pool,
+ (void **)pending, *nb_pending);
+ *nb_pending = 0;
+ }
+
+ pending[(*nb_pending)++] = m;
+ }
+}
+
+/**
+ * Size of the array holding mbufs from the same membool pending to be freed
+ * in bulk.
+ */
+#define RTE_PKTMBUF_FREE_PENDING_SZ 64
+
+/* Free a bulk of packet mbufs back into their original mempools. */
+void rte_pktmbuf_free_bulk(struct rte_mbuf **mbufs, unsigned int count)
+{
+ struct rte_mbuf *m, *m_next, *pending[RTE_PKTMBUF_FREE_PENDING_SZ];
+ unsigned int idx, nb_pending = 0;
+
+ for (idx = 0; idx < count; idx++) {
+ m = mbufs[idx];
+ if (unlikely(m == NULL))
+ continue;
+
+ __rte_mbuf_sanity_check(m, 1);
+
+ do {
+ m_next = m->next;
+ __rte_pktmbuf_free_seg_via_array(m,
+ pending, &nb_pending,
+ RTE_PKTMBUF_FREE_PENDING_SZ);
+ m = m_next;
+ } while (m != NULL);
+ }
+
+ if (nb_pending > 0)
+ rte_mempool_put_bulk(pending[0]->pool, (void **)pending, nb_pending);
+}
+
/* dump a mbuf on console */
void
rte_pktmbuf_dump(FILE *f, const struct rte_mbuf *m, unsigned dump_len)
diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
index 98225ec80..a02c8b12c 100644
--- a/lib/librte_mbuf/rte_mbuf.h
+++ b/lib/librte_mbuf/rte_mbuf.h
@@ -1907,6 +1907,21 @@ static inline void rte_pktmbuf_free(struct rte_mbuf *m)
}
}
+/**
+ * Free a bulk of packet mbufs back into their original mempools.
+ *
+ * Free a bulk of mbufs, and all their segments in case of chained buffers.
+ * Each segment is added back into its original mempool.
+ *
+ * @param mbufs
+ * Array of pointers to packet mbufs.
+ * The array may contain NULL pointers.
+ * @param count
+ * Array size.
+ */
+__rte_experimental
+void rte_pktmbuf_free_bulk(struct rte_mbuf **mbufs, unsigned int count);
+
/**
* Creates a "clone" of the given packet mbuf.
*
diff --git a/lib/librte_mbuf/rte_mbuf_version.map b/lib/librte_mbuf/rte_mbuf_version.map
index 2662a37bf..cd6154ef2 100644
--- a/lib/librte_mbuf/rte_mbuf_version.map
+++ b/lib/librte_mbuf/rte_mbuf_version.map
@@ -50,4 +50,5 @@ EXPERIMENTAL {
global:
rte_mbuf_check;
+ rte_pktmbuf_free_bulk;
} DPDK_18.08;
--
2.17.1
next prev parent reply other threads:[~2019-10-11 12:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-11 12:14 [dpdk-dev] [PATCH v8 0/2] " Morten Brørup
2019-10-11 12:14 ` Morten Brørup [this message]
2019-10-16 7:35 ` [dpdk-dev] [PATCH v8 1/2] " Olivier Matz
2019-10-11 12:14 ` [dpdk-dev] [PATCH v8 2/2] mbuf: add unit test for bulk alloc/free functions Morten Brørup
2019-10-16 7:54 ` Olivier Matz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191011121458.56388-2-mb@smartsharesystems.com \
--to=mb@smartsharesystems.com \
--cc=arybchenko@solarflare.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=harry.van.haaren@intel.com \
--cc=konstantin.ananyev@intel.com \
--cc=mattias.ronnblom@ericsson.com \
--cc=olivier.matz@6wind.com \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).