From: <vattunuru@marvell.com>
To: <dev@dpdk.org>
Cc: <jerinj@marvell.com>, <thomas@monjalon.net>,
Vamsi Attunuru <vattunuru@marvell.com>
Subject: [dpdk-dev] [PATCH v1 1/1] net/octeontx2: add multicast filter support
Date: Tue, 15 Oct 2019 16:14:21 +0530 [thread overview]
Message-ID: <20191015104421.6269-1-vattunuru@marvell.com> (raw)
From: Vamsi Attunuru <vattunuru@marvell.com>
Patch adds mc filter support for otx2 eth devices.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
---
doc/guides/nics/features/octeontx2.ini | 1 +
doc/guides/nics/features/octeontx2_vec.ini | 1 +
doc/guides/nics/octeontx2.rst | 6 +
drivers/net/octeontx2/Makefile | 1 +
drivers/net/octeontx2/meson.build | 1 +
drivers/net/octeontx2/otx2_ethdev.c | 17 +-
drivers/net/octeontx2/otx2_ethdev.h | 19 ++
drivers/net/octeontx2/otx2_mcast.c | 339 +++++++++++++++++++++++++++++
8 files changed, 384 insertions(+), 1 deletion(-)
diff --git a/doc/guides/nics/features/octeontx2.ini b/doc/guides/nics/features/octeontx2.ini
index 02073be..7c59b43 100644
--- a/doc/guides/nics/features/octeontx2.ini
+++ b/doc/guides/nics/features/octeontx2.ini
@@ -21,6 +21,7 @@ TSO = Y
Promiscuous mode = Y
Allmulticast mode = Y
Unicast MAC filter = Y
+Multicast MAC filter = Y
RSS hash = Y
RSS key update = Y
RSS reta update = Y
diff --git a/doc/guides/nics/features/octeontx2_vec.ini b/doc/guides/nics/features/octeontx2_vec.ini
index 733bb67..2553105 100644
--- a/doc/guides/nics/features/octeontx2_vec.ini
+++ b/doc/guides/nics/features/octeontx2_vec.ini
@@ -19,6 +19,7 @@ MTU update = Y
Promiscuous mode = Y
Allmulticast mode = Y
Unicast MAC filter = Y
+Multicast MAC filter = Y
RSS hash = Y
RSS key update = Y
RSS reta update = Y
diff --git a/doc/guides/nics/octeontx2.rst b/doc/guides/nics/octeontx2.rst
index 9a76567..3b567a5 100644
--- a/doc/guides/nics/octeontx2.rst
+++ b/doc/guides/nics/octeontx2.rst
@@ -24,6 +24,7 @@ Features of the OCTEON TX2 Ethdev PMD are:
- Multiple queues for TX and RX
- Receiver Side Scaling (RSS)
- MAC/VLAN filtering
+- Multicast MAC filtering
- Generic flow API
- Inner and Outer Checksum offload
- VLAN/QinQ stripping and insertion
@@ -193,6 +194,11 @@ CRC striping
The OCTEON TX2 SoC family NICs strip the CRC for every packet being received by
the host interface irrespective of the offload configuration.
+Multicast MAC filtering
+~~~~~~~~~~~~~~~~~~~~~~~
+
+``net_octeontx2`` pmd supports multicast mac filtering feature only on physical
+function devices.
Debugging Options
-----------------
diff --git a/drivers/net/octeontx2/Makefile b/drivers/net/octeontx2/Makefile
index 66cb5f2..0bfceca 100644
--- a/drivers/net/octeontx2/Makefile
+++ b/drivers/net/octeontx2/Makefile
@@ -44,6 +44,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_OCTEONTX2_PMD) += \
otx2_link.c \
otx2_vlan.c \
otx2_stats.c \
+ otx2_mcast.c \
otx2_lookup.c \
otx2_ethdev.c \
otx2_flow_ctrl.c \
diff --git a/drivers/net/octeontx2/meson.build b/drivers/net/octeontx2/meson.build
index 94bf09a..fad3076 100644
--- a/drivers/net/octeontx2/meson.build
+++ b/drivers/net/octeontx2/meson.build
@@ -12,6 +12,7 @@ sources = files('otx2_rx.c',
'otx2_link.c',
'otx2_vlan.c',
'otx2_stats.c',
+ 'otx2_mcast.c',
'otx2_lookup.c',
'otx2_ethdev.c',
'otx2_flow_ctrl.c',
diff --git a/drivers/net/octeontx2/otx2_ethdev.c b/drivers/net/octeontx2/otx2_ethdev.c
index 4a60f9f..62291c6 100644
--- a/drivers/net/octeontx2/otx2_ethdev.c
+++ b/drivers/net/octeontx2/otx2_ethdev.c
@@ -1583,6 +1583,7 @@ otx2_nix_configure(struct rte_eth_dev *eth_dev)
if (dev->configured == 1) {
otx2_nix_rxchan_bpid_cfg(eth_dev, false);
otx2_nix_vlan_fini(eth_dev);
+ otx2_nix_mc_addr_list_uninstall(eth_dev);
otx2_flow_free_all_resources(dev);
oxt2_nix_unregister_queue_irqs(eth_dev);
if (eth_dev->data->dev_conf.intr_conf.rxq)
@@ -1678,6 +1679,12 @@ otx2_nix_configure(struct rte_eth_dev *eth_dev)
goto q_irq_fini;
}
+ rc = otx2_nix_mc_addr_list_install(eth_dev);
+ if (rc < 0) {
+ otx2_err("Failed to install mc address list rc=%d", rc);
+ goto cq_fini;
+ }
+
/*
* Restore queue config when reconfigure followed by
* reconfigure and no queue configure invoked from application case.
@@ -1685,7 +1692,7 @@ otx2_nix_configure(struct rte_eth_dev *eth_dev)
if (dev->configured == 1) {
rc = nix_restore_queue_cfg(eth_dev);
if (rc)
- goto cq_fini;
+ goto uninstall_mc_list;
}
/* Update the mac address */
@@ -1709,6 +1716,8 @@ otx2_nix_configure(struct rte_eth_dev *eth_dev)
dev->configured_nb_tx_qs = data->nb_tx_queues;
return 0;
+uninstall_mc_list:
+ otx2_nix_mc_addr_list_uninstall(eth_dev);
cq_fini:
oxt2_nix_unregister_cq_irqs(eth_dev);
q_irq_fini:
@@ -1952,6 +1961,7 @@ static const struct eth_dev_ops otx2_eth_dev_ops = {
.mac_addr_add = otx2_nix_mac_addr_add,
.mac_addr_remove = otx2_nix_mac_addr_del,
.mac_addr_set = otx2_nix_mac_addr_set,
+ .set_mc_addr_list = otx2_nix_set_mc_addr_list,
.promiscuous_enable = otx2_nix_promisc_enable,
.promiscuous_disable = otx2_nix_promisc_disable,
.allmulticast_enable = otx2_nix_allmulticast_enable,
@@ -2169,6 +2179,8 @@ otx2_eth_dev_init(struct rte_eth_dev *eth_dev)
if (rc)
goto free_mac_addrs;
+ otx2_nix_mc_filter_init(dev);
+
otx2_nix_dbg("Port=%d pf=%d vf=%d ver=%s msix_off=%d hwcap=0x%" PRIx64
" rxoffload_capa=0x%" PRIx64 " txoffload_capa=0x%" PRIx64,
eth_dev->data->port_id, dev->pf, dev->vf,
@@ -2216,6 +2228,9 @@ otx2_eth_dev_uninit(struct rte_eth_dev *eth_dev, bool mbox_close)
/* Disable other rte_flow entries */
otx2_flow_fini(dev);
+ /* Free multicast filter list */
+ otx2_nix_mc_filter_fini(dev);
+
/* Disable PTP if already enabled */
if (otx2_ethdev_is_ptp_en(dev))
otx2_nix_timesync_disable(eth_dev);
diff --git a/drivers/net/octeontx2/otx2_ethdev.h b/drivers/net/octeontx2/otx2_ethdev.h
index 33fa0c6..4d9ed48 100644
--- a/drivers/net/octeontx2/otx2_ethdev.h
+++ b/drivers/net/octeontx2/otx2_ethdev.h
@@ -207,6 +207,14 @@ struct vlan_mkex_info {
uint64_t lb_lt_offset;
};
+struct mcast_entry {
+ struct rte_ether_addr mcast_mac;
+ uint16_t mcam_index;
+ TAILQ_ENTRY(mcast_entry) next;
+};
+
+TAILQ_HEAD(otx2_nix_mc_filter_tbl, mcast_entry);
+
struct vlan_entry {
uint32_t mcam_idx;
uint16_t vlan_id;
@@ -311,6 +319,8 @@ struct otx2_eth_dev {
struct rte_timecounter tx_tstamp_tc;
double clk_freq_mult;
uint64_t clk_delta;
+ bool mc_tbl_set;
+ struct otx2_nix_mc_filter_tbl mc_fltr_tbl;
} __rte_cache_aligned;
struct otx2_eth_txq {
@@ -393,6 +403,15 @@ int otx2_nix_tx_queue_start(struct rte_eth_dev *eth_dev, uint16_t qidx);
int otx2_nix_tx_queue_stop(struct rte_eth_dev *eth_dev, uint16_t qidx);
uint64_t otx2_nix_rxq_mbuf_setup(struct otx2_eth_dev *dev, uint16_t port_id);
+/* Multicast filter APIs */
+void otx2_nix_mc_filter_init(struct otx2_eth_dev *dev);
+void otx2_nix_mc_filter_fini(struct otx2_eth_dev *dev);
+int otx2_nix_mc_addr_list_install(struct rte_eth_dev *eth_dev);
+int otx2_nix_mc_addr_list_uninstall(struct rte_eth_dev *eth_dev);
+int otx2_nix_set_mc_addr_list(struct rte_eth_dev *eth_dev,
+ struct rte_ether_addr *mc_addr_set,
+ uint32_t nb_mc_addr);
+
/* MTU */
int otx2_nix_mtu_set(struct rte_eth_dev *eth_dev, uint16_t mtu);
int otx2_nix_recalc_mtu(struct rte_eth_dev *eth_dev);
diff --git a/drivers/net/octeontx2/otx2_mcast.c b/drivers/net/octeontx2/otx2_mcast.c
new file mode 100644
index 0000000..f84aa1b
--- /dev/null
+++ b/drivers/net/octeontx2/otx2_mcast.c
@@ -0,0 +1,339 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#include "otx2_ethdev.h"
+
+static int
+nix_mc_addr_list_free(struct otx2_eth_dev *dev, uint32_t entry_count)
+{
+ struct npc_mcam_free_entry_req *req;
+ struct otx2_mbox *mbox = dev->mbox;
+ struct mcast_entry *entry;
+ int rc = 0;
+
+ if (entry_count == 0)
+ goto exit;
+
+ TAILQ_FOREACH(entry, &dev->mc_fltr_tbl, next) {
+ req = otx2_mbox_alloc_msg_npc_mcam_free_entry(mbox);
+ req->entry = entry->mcam_index;
+
+ rc = otx2_mbox_process_msg(mbox, NULL);
+ if (rc < 0)
+ goto exit;
+
+ TAILQ_REMOVE(&dev->mc_fltr_tbl, entry, next);
+ rte_free(entry);
+ entry_count--;
+
+ if (entry_count == 0)
+ break;
+ }
+
+ if (entry == NULL)
+ dev->mc_tbl_set = false;
+
+exit:
+ return rc;
+}
+
+static int
+nix_hw_update_mc_addr_list(struct rte_eth_dev *eth_dev)
+{
+ struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
+ struct otx2_npc_flow_info *npc = &dev->npc_flow;
+ volatile uint8_t *key_data, *key_mask;
+ struct npc_mcam_write_entry_req *req;
+ struct otx2_mbox *mbox = dev->mbox;
+ struct npc_xtract_info *x_info;
+ uint64_t mcam_data, mcam_mask;
+ struct mcast_entry *entry;
+ otx2_dxcfg_t *ld_cfg;
+ uint8_t *mac_addr;
+ uint64_t action;
+ int idx, rc = 0;
+
+ ld_cfg = &npc->prx_dxcfg;
+ /* Get ETH layer profile info for populating mcam entries */
+ x_info = &(*ld_cfg)[NPC_MCAM_RX][NPC_LID_LA][NPC_LT_LA_ETHER].xtract[0];
+
+ TAILQ_FOREACH(entry, &dev->mc_fltr_tbl, next) {
+ req = otx2_mbox_alloc_msg_npc_mcam_write_entry(mbox);
+ if (req == NULL) {
+ /* The mbox memory buffer can be full.
+ * Flush it and retry
+ */
+ otx2_mbox_msg_send(mbox, 0);
+ rc = otx2_mbox_wait_for_rsp(mbox, 0);
+ if (rc < 0)
+ goto exit;
+
+ req = otx2_mbox_alloc_msg_npc_mcam_write_entry(mbox);
+ if (req == NULL) {
+ rc = -ENOMEM;
+ goto exit;
+ }
+ }
+ req->entry = entry->mcam_index;
+ req->intf = NPC_MCAM_RX;
+ req->enable_entry = 1;
+
+ /* Channel base extracted to KW0[11:0] */
+ req->entry_data.kw[0] = dev->rx_chan_base;
+ req->entry_data.kw_mask[0] = RTE_LEN2MASK(12, uint64_t);
+
+ /* Update mcam address */
+ key_data = (volatile uint8_t *)req->entry_data.kw;
+ key_mask = (volatile uint8_t *)req->entry_data.kw_mask;
+
+ mcam_data = 0ull;
+ mcam_mask = RTE_LEN2MASK(48, uint64_t);
+ mac_addr = &entry->mcast_mac.addr_bytes[0];
+ for (idx = RTE_ETHER_ADDR_LEN - 1; idx >= 0; idx--)
+ mcam_data |= ((uint64_t)*mac_addr++) << (8 * idx);
+
+ otx2_mbox_memcpy(key_data + x_info->key_off,
+ &mcam_data, x_info->len);
+ otx2_mbox_memcpy(key_mask + x_info->key_off,
+ &mcam_mask, x_info->len);
+
+ action = NIX_RX_ACTIONOP_UCAST;
+
+ if (eth_dev->data->dev_conf.rxmode.mq_mode == ETH_MQ_RX_RSS) {
+ action = NIX_RX_ACTIONOP_RSS;
+ action |= (uint64_t)(dev->rss_info.alg_idx) << 56;
+ }
+
+ action |= ((uint64_t)otx2_pfvf_func(dev->pf, dev->vf)) << 4;
+ req->entry_data.action = action;
+ }
+
+ otx2_mbox_msg_send(mbox, 0);
+ rc = otx2_mbox_wait_for_rsp(mbox, 0);
+
+exit:
+ return rc;
+}
+
+int
+otx2_nix_mc_addr_list_install(struct rte_eth_dev *eth_dev)
+{
+ struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
+ struct npc_mcam_alloc_entry_req *req;
+ struct npc_mcam_alloc_entry_rsp *rsp;
+ struct otx2_mbox *mbox = dev->mbox;
+ uint32_t entry_count = 0, idx = 0;
+ struct mcast_entry *entry;
+ int rc = 0;
+
+ if (!dev->mc_tbl_set)
+ return 0;
+
+ TAILQ_FOREACH(entry, &dev->mc_fltr_tbl, next)
+ entry_count++;
+
+ req = otx2_mbox_alloc_msg_npc_mcam_alloc_entry(mbox);
+ req->priority = NPC_MCAM_ANY_PRIO;
+ req->count = entry_count;
+
+ rc = otx2_mbox_process_msg(mbox, (void *)&rsp);
+ if (rc || rsp->count < entry_count) {
+ otx2_err("Failed to allocate required mcam entries");
+ goto exit;
+ }
+
+ TAILQ_FOREACH(entry, &dev->mc_fltr_tbl, next)
+ entry->mcam_index = rsp->entry_list[idx];
+
+ rc = nix_hw_update_mc_addr_list(eth_dev);
+
+exit:
+ return rc;
+}
+
+int
+otx2_nix_mc_addr_list_uninstall(struct rte_eth_dev *eth_dev)
+{
+ struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
+ struct npc_mcam_free_entry_req *req;
+ struct otx2_mbox *mbox = dev->mbox;
+ struct mcast_entry *entry;
+ int rc = 0;
+
+ if (!dev->mc_tbl_set)
+ return 0;
+
+ TAILQ_FOREACH(entry, &dev->mc_fltr_tbl, next) {
+ req = otx2_mbox_alloc_msg_npc_mcam_free_entry(mbox);
+ if (req == NULL) {
+ otx2_mbox_msg_send(mbox, 0);
+ rc = otx2_mbox_wait_for_rsp(mbox, 0);
+ if (rc < 0)
+ goto exit;
+
+ req = otx2_mbox_alloc_msg_npc_mcam_free_entry(mbox);
+ if (req == NULL) {
+ rc = -ENOMEM;
+ goto exit;
+ }
+ }
+ req->entry = entry->mcam_index;
+ }
+
+ otx2_mbox_msg_send(mbox, 0);
+ rc = otx2_mbox_wait_for_rsp(mbox, 0);
+
+exit:
+ return rc;
+}
+
+static int
+nix_setup_mc_addr_list(struct otx2_eth_dev *dev,
+ struct rte_ether_addr *mc_addr_set)
+{
+ struct npc_mcam_ena_dis_entry_req *req;
+ struct otx2_mbox *mbox = dev->mbox;
+ struct mcast_entry *entry;
+ uint32_t idx = 0;
+ int rc = 0;
+
+ /* Populate PMD's mcast list with given mcast mac addresses and
+ * disable all mcam entries pertaining to the mcast list.
+ */
+ TAILQ_FOREACH(entry, &dev->mc_fltr_tbl, next) {
+ rte_memcpy(&entry->mcast_mac, &mc_addr_set[idx++],
+ RTE_ETHER_ADDR_LEN);
+
+ req = otx2_mbox_alloc_msg_npc_mcam_dis_entry(mbox);
+ if (req == NULL) {
+ otx2_mbox_msg_send(mbox, 0);
+ rc = otx2_mbox_wait_for_rsp(mbox, 0);
+ if (rc < 0)
+ goto exit;
+
+ req = otx2_mbox_alloc_msg_npc_mcam_dis_entry(mbox);
+ if (req == NULL) {
+ rc = -ENOMEM;
+ goto exit;
+ }
+ }
+ req->entry = entry->mcam_index;
+ }
+
+ otx2_mbox_msg_send(mbox, 0);
+ rc = otx2_mbox_wait_for_rsp(mbox, 0);
+
+exit:
+ return rc;
+}
+
+int
+otx2_nix_set_mc_addr_list(struct rte_eth_dev *eth_dev,
+ struct rte_ether_addr *mc_addr_set,
+ uint32_t nb_mc_addr)
+{
+ struct otx2_eth_dev *dev = otx2_eth_pmd_priv(eth_dev);
+ struct npc_mcam_alloc_entry_req *req;
+ struct npc_mcam_alloc_entry_rsp *rsp;
+ struct otx2_mbox *mbox = dev->mbox;
+ uint32_t idx, priv_count = 0;
+ struct mcast_entry *entry;
+ int rc = 0;
+
+ if (otx2_dev_is_vf(dev))
+ return -ENOTSUP;
+
+ TAILQ_FOREACH(entry, &dev->mc_fltr_tbl, next)
+ priv_count++;
+
+ if (nb_mc_addr == 0 || mc_addr_set == NULL) {
+ /* Free existing list if new list is null */
+ nb_mc_addr = priv_count;
+ goto exit;
+ }
+
+ for (idx = 0; idx < nb_mc_addr; idx++) {
+ if (!rte_is_multicast_ether_addr(&mc_addr_set[idx]))
+ return -EINVAL;
+ }
+
+ /* New list is bigger than the existing list,
+ * allocate mcam entries for the extra entries.
+ */
+ if (nb_mc_addr > priv_count) {
+ req = otx2_mbox_alloc_msg_npc_mcam_alloc_entry(mbox);
+ req->priority = NPC_MCAM_ANY_PRIO;
+ req->count = nb_mc_addr - priv_count;
+
+ rc = otx2_mbox_process_msg(mbox, (void *)&rsp);
+ if (rc || (rsp->count + priv_count < nb_mc_addr)) {
+ otx2_err("Failed to allocate required entries");
+ nb_mc_addr = priv_count;
+ goto exit;
+ }
+
+ /* Append new mcam entries to the existing mc list */
+ for (idx = 0; idx < rsp->count; idx++) {
+ entry = rte_zmalloc("otx2_nix_mc_entry",
+ sizeof(struct mcast_entry), 0);
+ if (!entry) {
+ otx2_err("Failed to allocate memory");
+ nb_mc_addr = priv_count;
+ rc = -ENOMEM;
+ goto exit;
+ }
+ entry->mcam_index = rsp->entry_list[idx];
+ TAILQ_INSERT_HEAD(&dev->mc_fltr_tbl, entry, next);
+ }
+ } else {
+ /* Free the extra mcam entries if the new list is smaller
+ * than exiting list.
+ */
+ nix_mc_addr_list_free(dev, priv_count - nb_mc_addr);
+ }
+
+
+ /* Now mc_fltr_tbl has the required number of mcam entries,
+ * Traverse through it and add new multicast filter table entries.
+ */
+ rc = nix_setup_mc_addr_list(dev, mc_addr_set);
+ if (rc < 0)
+ goto exit;
+
+ rc = nix_hw_update_mc_addr_list(eth_dev);
+ if (rc < 0)
+ goto exit;
+
+ dev->mc_tbl_set = true;
+
+ return 0;
+
+exit:
+ nix_mc_addr_list_free(dev, nb_mc_addr);
+ return rc;
+}
+
+void
+otx2_nix_mc_filter_init(struct otx2_eth_dev *dev)
+{
+ if (otx2_dev_is_vf(dev))
+ return;
+
+ TAILQ_INIT(&dev->mc_fltr_tbl);
+}
+
+void
+otx2_nix_mc_filter_fini(struct otx2_eth_dev *dev)
+{
+ struct mcast_entry *entry;
+ uint32_t count = 0;
+
+ if (otx2_dev_is_vf(dev))
+ return;
+
+ TAILQ_FOREACH(entry, &dev->mc_fltr_tbl, next)
+ count++;
+
+ nix_mc_addr_list_free(dev, count);
+}
--
2.8.4
next reply other threads:[~2019-10-15 10:44 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-15 10:44 vattunuru [this message]
2019-10-18 11:18 ` Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191015104421.6269-1-vattunuru@marvell.com \
--to=vattunuru@marvell.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).