From: Artur Trybula <arturx.trybula@intel.com>
To: dev@dpdk.org, fiona.trahe@intel.com, shallyv@marvell.com,
adamx.dybkowski@intel.com, arturx.trybula@intel.com,
akhil.goyal@nxp.com
Subject: [dpdk-dev] [PATCH v4 2/2] test/compress: unit test for stateless overflow recovery
Date: Wed, 16 Oct 2019 11:40:45 +0200 [thread overview]
Message-ID: <20191016094045.19895-3-arturx.trybula@intel.com> (raw)
In-Reply-To: <20191016094045.19895-1-arturx.trybula@intel.com>
Added unit test to check out-of-space recoverable feature.
Signed-off-by: Artur Trybula <arturx.trybula@intel.com>
---
app/test/test_compressdev.c | 280 ++++++++++++++++++++++++++++++------
1 file changed, 233 insertions(+), 47 deletions(-)
diff --git a/app/test/test_compressdev.c b/app/test/test_compressdev.c
index d470c34b9..283c64971 100644
--- a/app/test/test_compressdev.c
+++ b/app/test/test_compressdev.c
@@ -30,6 +30,7 @@
* due to the compress block headers
*/
#define COMPRESS_BUF_SIZE_RATIO 1.3
+#define COMPRESS_BUF_SIZE_RATIO_OVERFLOW 0.2
#define NUM_LARGE_MBUFS 16
#define SMALL_SEG_SIZE 256
#define MAX_SEGS 16
@@ -72,6 +73,11 @@ enum varied_buff {
LB_TO_SGL /* output buffer is chained */
};
+enum overflow_test {
+ OVERFLOW_DISABLED,
+ OVERFLOW_ENABLED
+};
+
struct priv_op_data {
uint16_t orig_idx;
};
@@ -110,6 +116,8 @@ struct test_data_params {
const struct rte_memzone *inbuf_memzone;
const struct rte_memzone *compbuf_memzone;
const struct rte_memzone *uncompbuf_memzone;
+ /* overflow test activation */
+ enum overflow_test overflow;
};
static struct comp_testsuite_params testsuite_params = { 0 };
@@ -725,6 +733,49 @@ extbuf_free_callback(void *addr __rte_unused, void *opaque __rte_unused)
{
}
+static int
+test_run_enqueue_dequeue(struct rte_comp_op **ops, unsigned int num_bufs,
+ struct rte_comp_op **ops_processed)
+{
+ uint16_t num_enqd, num_deqd, num_total_deqd;
+ unsigned int deqd_retries = 0;
+
+ /* Enqueue and dequeue all operations */
+ num_enqd = rte_compressdev_enqueue_burst(0, 0, ops, num_bufs);
+ if (num_enqd < num_bufs) {
+ RTE_LOG(ERR, USER1,
+ "Some operations could not be enqueued\n");
+ return -1;
+ }
+
+ num_total_deqd = 0;
+ do {
+ /*
+ * If retrying a dequeue call, wait for 10 ms to allow
+ * enough time to the driver to process the operations
+ */
+ if (deqd_retries != 0) {
+ /*
+ * Avoid infinite loop if not all the
+ * operations get out of the device
+ */
+ if (deqd_retries == MAX_DEQD_RETRIES) {
+ RTE_LOG(ERR, USER1,
+ "Not all operations could be dequeued\n");
+ return -1;
+ }
+ usleep(DEQUEUE_WAIT_TIME);
+ }
+ num_deqd = rte_compressdev_dequeue_burst(0, 0,
+ &ops_processed[num_total_deqd], num_bufs);
+ num_total_deqd += num_deqd;
+ deqd_retries++;
+
+ } while (num_total_deqd < num_enqd);
+
+ return 0;
+}
+
/*
* Compresses and decompresses buffer with compressdev API and Zlib API
*/
@@ -745,6 +796,7 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
unsigned int out_of_space = test_data->out_of_space;
unsigned int big_data = test_data->big_data;
enum zlib_direction zlib_dir = test_data->zlib_dir;
+ enum overflow_test overflow_tst = test_data->overflow;
int ret_status = TEST_FAILED;
struct rte_mbuf_ext_shared_info inbuf_info;
struct rte_mbuf_ext_shared_info compbuf_info;
@@ -773,6 +825,7 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
rte_compressdev_capability_get(0, RTE_COMP_ALGO_DEFLATE);
char *contig_buf = NULL;
uint64_t compress_checksum[num_bufs];
+ uint32_t compressed_data_size[num_bufs];
void *stream = NULL;
char *all_decomp_data = NULL;
unsigned int decomp_produced_data_size = 0;
@@ -793,6 +846,7 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
memset(ops, 0, sizeof(struct rte_comp_op *) * num_bufs);
memset(ops_processed, 0, sizeof(struct rte_comp_op *) * num_bufs);
memset(priv_xforms, 0, sizeof(void *) * num_bufs);
+ memset(compressed_data_size, 0, sizeof(uint32_t) * num_bufs);
if (decompress_state == RTE_COMP_OP_STATEFUL) {
data_size = strlen(test_bufs[0]) + 1;
@@ -845,6 +899,11 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
for (i = 0; i < num_bufs; i++) {
data_size = strlen(test_bufs[i]) + 1;
buf_ptr = rte_pktmbuf_append(uncomp_bufs[i], data_size);
+ if (buf_ptr == NULL) {
+ RTE_LOG(ERR, USER1,
+ "Append extra bytes to the source mbuf failed\n");
+ goto exit;
+ }
strlcpy(buf_ptr, test_bufs[i], data_size);
}
}
@@ -893,11 +952,22 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
for (i = 0; i < num_bufs; i++) {
if (out_of_space == 1 && oos_zlib_decompress)
data_size = OUT_OF_SPACE_BUF;
- else
- (data_size = strlen(test_bufs[i]) *
- COMPRESS_BUF_SIZE_RATIO);
-
- rte_pktmbuf_append(comp_bufs[i], data_size);
+ else {
+ float ratio =
+ ((test_data->zlib_dir == ZLIB_DECOMPRESS ||
+ test_data->zlib_dir == ZLIB_NONE) &&
+ overflow_tst == OVERFLOW_ENABLED) ?
+ COMPRESS_BUF_SIZE_RATIO_OVERFLOW :
+ COMPRESS_BUF_SIZE_RATIO;
+
+ data_size = strlen(test_bufs[i]) * ratio;
+ }
+ buf_ptr = rte_pktmbuf_append(comp_bufs[i], data_size);
+ if (buf_ptr == NULL) {
+ RTE_LOG(ERR, USER1,
+ "Append extra bytes to the destination mbuf failed\n");
+ goto exit;
+ }
}
}
@@ -963,7 +1033,8 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
num_priv_xforms++;
}
- if (capa->comp_feature_flags & RTE_COMP_FF_SHAREABLE_PRIV_XFORM) {
+ if (capa->comp_feature_flags &
+ RTE_COMP_FF_SHAREABLE_PRIV_XFORM) {
/* Attach shareable private xform data to ops */
for (i = 0; i < num_bufs; i++)
ops[i]->private_xform = priv_xforms[i % num_xforms];
@@ -987,40 +1058,41 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
ops[i]->private_xform = priv_xforms[i];
}
- /* Enqueue and dequeue all operations */
- num_enqd = rte_compressdev_enqueue_burst(0, 0, ops, num_bufs);
- if (num_enqd < num_bufs) {
+recovery_lb:
+ ret = test_run_enqueue_dequeue(ops, num_bufs, ops_processed);
+ if (ret < 0) {
RTE_LOG(ERR, USER1,
- "The operations could not be enqueued\n");
+ "Enqueue/dequeue operation failed\n");
goto exit;
}
- num_total_deqd = 0;
- do {
- /*
- * If retrying a dequeue call, wait for 10 ms to allow
- * enough time to the driver to process the operations
- */
- if (deqd_retries != 0) {
- /*
- * Avoid infinite loop if not all the
- * operations get out of the device
- */
- if (deqd_retries == MAX_DEQD_RETRIES) {
+ for (i = 0; i < num_bufs; i++) {
+ compressed_data_size[i] += ops_processed[i]->produced;
+
+ if (ops_processed[i]->status ==
+ RTE_COMP_OP_STATUS_OUT_OF_SPACE_RECOVERABLE) {
+
+ ops[i]->status =
+ RTE_COMP_OP_STATUS_NOT_PROCESSED;
+ ops[i]->src.offset +=
+ ops_processed[i]->consumed;
+ ops[i]->src.length -=
+ ops_processed[i]->consumed;
+ ops[i]->dst.offset +=
+ ops_processed[i]->produced;
+
+ buf_ptr = rte_pktmbuf_append(
+ ops[i]->m_dst,
+ ops_processed[i]->produced);
+
+ if (buf_ptr == NULL) {
RTE_LOG(ERR, USER1,
- "Not all operations could be "
- "dequeued\n");
+ "Data recovery: append extra bytes to the current mbuf failed\n");
goto exit;
}
- usleep(DEQUEUE_WAIT_TIME);
+ goto recovery_lb;
}
- num_deqd = rte_compressdev_dequeue_burst(0, 0,
- &ops_processed[num_total_deqd], num_bufs);
- num_total_deqd += num_deqd;
- deqd_retries++;
-
- } while (num_total_deqd < num_enqd);
-
+ }
deqd_retries = 0;
/* Free compress private xforms */
@@ -1064,7 +1136,7 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
for (i = 0; i < num_bufs; i++) {
if (out_of_space && oos_zlib_decompress) {
if (ops_processed[i]->status !=
- RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED) {
+ RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED) {
ret_status = TEST_FAILED;
RTE_LOG(ERR, USER1,
"Operation without expected out of "
@@ -1075,6 +1147,16 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
}
if (ops_processed[i]->status != RTE_COMP_OP_STATUS_SUCCESS) {
+ if (overflow_tst == OVERFLOW_ENABLED) {
+ if (ops_processed[i]->status ==
+ RTE_COMP_OP_STATUS_OUT_OF_SPACE_TERMINATED) {
+ ret_status = 1;
+ RTE_LOG(INFO, USER1,
+ "Out-of-space-recoverable functionality"
+ " is not supported on this device\n");
+ goto exit;
+ }
+ }
RTE_LOG(ERR, USER1,
"Some operations were not successful\n");
goto exit;
@@ -1147,7 +1229,12 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
data_size =
strlen(test_bufs[priv_data->orig_idx]) + 1;
- rte_pktmbuf_append(uncomp_bufs[i], data_size);
+ buf_ptr = rte_pktmbuf_append(uncomp_bufs[i], data_size);
+ if (buf_ptr == NULL) {
+ RTE_LOG(ERR, USER1,
+ "Append extra bytes to the decompressed mbuf failed\n");
+ goto exit;
+ }
}
}
@@ -1169,7 +1256,10 @@ test_deflate_comp_decomp(const struct interim_data_params *int_data,
* Set the length of the compressed data to the
* number of bytes that were produced in the previous stage
*/
- ops[i]->src.length = ops_processed[i]->produced;
+ if (compressed_data_size[i])
+ ops[i]->src.length = compressed_data_size[i];
+ else
+ ops[i]->src.length = ops_processed[i]->produced;
ops[i]->dst.offset = 0;
if (decompress_state == RTE_COMP_OP_STATELESS) {
@@ -1541,7 +1631,8 @@ test_compressdev_deflate_stateless_fixed(void)
.buff_type = LB_BOTH,
.zlib_dir = ZLIB_DECOMPRESS,
.out_of_space = 0,
- .big_data = 0
+ .big_data = 0,
+ .overflow = OVERFLOW_DISABLED
};
for (i = 0; i < RTE_DIM(compress_test_bufs); i++) {
@@ -1611,7 +1702,8 @@ test_compressdev_deflate_stateless_dynamic(void)
.buff_type = LB_BOTH,
.zlib_dir = ZLIB_DECOMPRESS,
.out_of_space = 0,
- .big_data = 0
+ .big_data = 0,
+ .overflow = OVERFLOW_DISABLED
};
for (i = 0; i < RTE_DIM(compress_test_bufs); i++) {
@@ -1665,7 +1757,8 @@ test_compressdev_deflate_stateless_multi_op(void)
.buff_type = LB_BOTH,
.zlib_dir = ZLIB_DECOMPRESS,
.out_of_space = 0,
- .big_data = 0
+ .big_data = 0,
+ .overflow = OVERFLOW_DISABLED
};
/* Compress with compressdev, decompress with Zlib */
@@ -1718,7 +1811,8 @@ test_compressdev_deflate_stateless_multi_level(void)
.buff_type = LB_BOTH,
.zlib_dir = ZLIB_DECOMPRESS,
.out_of_space = 0,
- .big_data = 0
+ .big_data = 0,
+ .overflow = OVERFLOW_DISABLED
};
for (i = 0; i < RTE_DIM(compress_test_bufs); i++) {
@@ -1807,7 +1901,8 @@ test_compressdev_deflate_stateless_multi_xform(void)
.buff_type = LB_BOTH,
.zlib_dir = ZLIB_DECOMPRESS,
.out_of_space = 0,
- .big_data = 0
+ .big_data = 0,
+ .overflow = OVERFLOW_DISABLED
};
/* Compress with compressdev, decompress with Zlib */
@@ -1855,7 +1950,8 @@ test_compressdev_deflate_stateless_sgl(void)
.buff_type = SGL_BOTH,
.zlib_dir = ZLIB_DECOMPRESS,
.out_of_space = 0,
- .big_data = 0
+ .big_data = 0,
+ .overflow = OVERFLOW_DISABLED
};
for (i = 0; i < RTE_DIM(compress_test_bufs); i++) {
@@ -1965,7 +2061,8 @@ test_compressdev_deflate_stateless_checksum(void)
.buff_type = LB_BOTH,
.zlib_dir = ZLIB_DECOMPRESS,
.out_of_space = 0,
- .big_data = 0
+ .big_data = 0,
+ .overflow = OVERFLOW_DISABLED
};
/* Check if driver supports crc32 checksum and test */
@@ -2082,7 +2179,8 @@ test_compressdev_out_of_space_buffer(void)
.buff_type = LB_BOTH,
.zlib_dir = ZLIB_DECOMPRESS,
.out_of_space = 1, /* run out-of-space test */
- .big_data = 0
+ .big_data = 0,
+ .overflow = OVERFLOW_DISABLED
};
/* Compress with compressdev, decompress with Zlib */
test_data.zlib_dir = ZLIB_DECOMPRESS;
@@ -2159,7 +2257,8 @@ test_compressdev_deflate_stateless_dynamic_big(void)
.buff_type = SGL_BOTH,
.zlib_dir = ZLIB_DECOMPRESS,
.out_of_space = 0,
- .big_data = 1
+ .big_data = 1,
+ .overflow = OVERFLOW_DISABLED
};
ts_params->def_comp_xform->compress.deflate.huffman =
@@ -2223,7 +2322,8 @@ test_compressdev_deflate_stateful_decomp(void)
.out_of_space = 0,
.big_data = 0,
.decompress_output_block_size = 2000,
- .decompress_steps_max = 4
+ .decompress_steps_max = 4,
+ .overflow = OVERFLOW_DISABLED
};
/* Compress with Zlib, decompress with compressdev */
@@ -2305,7 +2405,8 @@ test_compressdev_deflate_stateful_decomp_checksum(void)
.out_of_space = 0,
.big_data = 0,
.decompress_output_block_size = 2000,
- .decompress_steps_max = 4
+ .decompress_steps_max = 4,
+ .overflow = OVERFLOW_DISABLED
};
/* Check if driver supports crc32 checksum and test */
@@ -2441,7 +2542,8 @@ test_compressdev_external_mbufs(void)
.inbuf_memzone = make_memzone("inbuf", data_len),
.compbuf_memzone = make_memzone("compbuf", data_len *
COMPRESS_BUF_SIZE_RATIO),
- .uncompbuf_memzone = make_memzone("decompbuf", data_len)
+ .uncompbuf_memzone = make_memzone("decompbuf", data_len),
+ .overflow = OVERFLOW_DISABLED
};
for (i = 0; i < RTE_DIM(compress_test_bufs); i++) {
@@ -2472,6 +2574,88 @@ test_compressdev_external_mbufs(void)
return ret;
}
+static int
+test_compressdev_deflate_stateless_fixed_oos_recoverable(void)
+{
+ struct comp_testsuite_params *ts_params = &testsuite_params;
+ uint16_t i;
+ int ret;
+ int comp_result;
+ const struct rte_compressdev_capabilities *capab;
+
+ capab = rte_compressdev_capability_get(0, RTE_COMP_ALGO_DEFLATE);
+ TEST_ASSERT(capab != NULL, "Failed to retrieve device capabilities");
+
+ if ((capab->comp_feature_flags & RTE_COMP_FF_HUFFMAN_FIXED) == 0)
+ return -ENOTSUP;
+
+ struct rte_comp_xform *compress_xform =
+ rte_malloc(NULL, sizeof(struct rte_comp_xform), 0);
+
+ if (compress_xform == NULL) {
+ RTE_LOG(ERR, USER1,
+ "Compress xform could not be created\n");
+ ret = TEST_FAILED;
+ goto exit;
+ }
+
+ memcpy(compress_xform, ts_params->def_comp_xform,
+ sizeof(struct rte_comp_xform));
+ compress_xform->compress.deflate.huffman = RTE_COMP_HUFFMAN_FIXED;
+
+ struct interim_data_params int_data = {
+ NULL,
+ 1,
+ NULL,
+ &compress_xform,
+ &ts_params->def_decomp_xform,
+ 1
+ };
+
+ struct test_data_params test_data = {
+ .compress_state = RTE_COMP_OP_STATELESS,
+ .decompress_state = RTE_COMP_OP_STATELESS,
+ .buff_type = LB_BOTH,
+ .zlib_dir = ZLIB_DECOMPRESS,
+ .out_of_space = 0,
+ .big_data = 0,
+ .overflow = OVERFLOW_ENABLED
+ };
+
+ for (i = 0; i < RTE_DIM(compress_test_bufs); i++) {
+ int_data.test_bufs = &compress_test_bufs[i];
+ int_data.buf_idx = &i;
+
+ /* Compress with compressdev, decompress with Zlib */
+ test_data.zlib_dir = ZLIB_DECOMPRESS;
+ comp_result = test_deflate_comp_decomp(&int_data, &test_data);
+ if (comp_result < 0) {
+ ret = TEST_FAILED;
+ goto exit;
+ } else if (comp_result > 0) {
+ ret = -ENOTSUP;
+ goto exit;
+ }
+
+ /* Compress with Zlib, decompress with compressdev */
+ test_data.zlib_dir = ZLIB_COMPRESS;
+ comp_result = test_deflate_comp_decomp(&int_data, &test_data);
+ if (comp_result < 0) {
+ ret = TEST_FAILED;
+ goto exit;
+ } else if (comp_result > 0) {
+ ret = -ENOTSUP;
+ goto exit;
+ }
+ }
+
+ ret = TEST_SUCCESS;
+
+exit:
+ rte_free(compress_xform);
+ return ret;
+}
+
static struct unit_test_suite compressdev_testsuite = {
.suite_name = "compressdev unit test suite",
.setup = testsuite_setup,
@@ -2503,6 +2687,8 @@ static struct unit_test_suite compressdev_testsuite = {
test_compressdev_deflate_stateful_decomp_checksum),
TEST_CASE_ST(generic_ut_setup, generic_ut_teardown,
test_compressdev_external_mbufs),
+ TEST_CASE_ST(generic_ut_setup, generic_ut_teardown,
+ test_compressdev_deflate_stateless_fixed_oos_recoverable),
TEST_CASES_END() /**< NULL terminate unit test array */
}
};
--
2.17.1
next prev parent reply other threads:[~2019-10-16 9:41 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-06 11:11 [dpdk-dev] [PATCH 1/2] compress/qat: overflow catching Artur Trybula
2019-09-06 11:11 ` [dpdk-dev] [PATCH 2/2] test/compress: unit test for stateless overflow recovery Artur Trybula
2019-09-26 9:32 ` [dpdk-dev] [PATCH v2 0/2] Add overflow recovery for stateless compression Artur Trybula
2019-09-26 9:32 ` [dpdk-dev] [PATCH v2 1/2] compress/qat: overflow catch " Artur Trybula
2019-09-26 9:32 ` [dpdk-dev] [PATCH v2 2/2] test/compress: unit test for stateless overflow recovery Artur Trybula
2019-10-11 17:46 ` [dpdk-dev] [PATCH v3 0/2] Add overflow recovery for stateless compression Artur Trybula
2019-10-11 17:46 ` [dpdk-dev] [PATCH v3 1/2] compress/qat: overflow catch " Artur Trybula
2019-10-14 13:38 ` Trahe, Fiona
2019-10-11 17:46 ` [dpdk-dev] [PATCH v3 2/2] test/compress: unit test for stateless overflow recovery Artur Trybula
2019-10-14 13:48 ` Trahe, Fiona
2019-10-14 14:20 ` Trybula, ArturX
2019-10-16 9:40 ` [dpdk-dev] [PATCH v4 0/2] Add overflow recovery for stateless compression Artur Trybula
2019-10-16 9:40 ` [dpdk-dev] [PATCH v4 1/2] compress/qat: overflow catch " Artur Trybula
2019-10-16 9:40 ` Artur Trybula [this message]
2019-10-16 11:16 ` [dpdk-dev] [PATCH v4 0/2] Add overflow recovery " Trahe, Fiona
2019-10-16 13:13 ` Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191016094045.19895-3-arturx.trybula@intel.com \
--to=arturx.trybula@intel.com \
--cc=adamx.dybkowski@intel.com \
--cc=akhil.goyal@nxp.com \
--cc=dev@dpdk.org \
--cc=fiona.trahe@intel.com \
--cc=shallyv@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).