From: Hemant Agrawal <hemant.agrawal@nxp.com>
To: dev@dpdk.org
Cc: akhil.goyal@nxp.com, thierry.herbelot@6wind.com,
Hemant Agrawal <hemant.agrawal@nxp.com>
Subject: [dpdk-dev] [PATCH] crypto/dpaa_sec: enable compilation without security
Date: Fri, 18 Oct 2019 13:26:13 +0530 [thread overview]
Message-ID: <20191018075613.2784-3-hemant.agrawal@nxp.com> (raw)
In-Reply-To: <20191018075613.2784-1-hemant.agrawal@nxp.com>
This patch enables the dpaaX_sec compilation when SECURITY
is disabled.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
---
drivers/crypto/Makefile | 4 ++--
drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 26 +++++++++++++++------
drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h | 11 +++++++--
drivers/crypto/dpaa_sec/dpaa_sec.c | 25 ++++++++++++++------
drivers/crypto/dpaa_sec/dpaa_sec.h | 10 ++++++--
mk/rte.app.mk | 4 ++--
6 files changed, 58 insertions(+), 22 deletions(-)
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
index 8b0085792..47a2a9e79 100644
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -16,14 +16,14 @@ DIRS-$(CONFIG_RTE_LIBRTE_PMD_KASUMI) += kasumi
DIRS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += zuc
DIRS-$(CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO) += mvsam
DIRS-$(CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO) += null
-ifeq ($(CONFIG_RTE_LIBRTE_SECURITY),y)
ifeq ($(CONFIG_RTE_EAL_VFIO)$(CONFIG_RTE_LIBRTE_FSLMC_BUS),yy)
DIRS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += dpaa2_sec
endif # CONFIG_RTE_LIBRTE_FSLMC_BUS
ifeq ($(CONFIG_RTE_LIBRTE_DPAA_BUS),y)
DIRS-$(CONFIG_RTE_LIBRTE_PMD_DPAA_SEC) += dpaa_sec
-DIRS-$(CONFIG_RTE_LIBRTE_PMD_CAAM_JR) += caam_jr
endif # CONFIG_RTE_LIBRTE_PMD_DPAA_SEC
+ifeq ($(CONFIG_RTE_LIBRTE_SECURITY),y)
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_CAAM_JR) += caam_jr
endif # CONFIG_RTE_LIBRTE_SECURITY
DIRS-$(CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO) += virtio
DIRS-$(CONFIG_RTE_LIBRTE_PMD_NITROX) += nitrox
diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
index b33dbca8b..41dbbb7da 100644
--- a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
@@ -166,6 +166,7 @@ build_proto_compound_sg_fd(dpaa2_sec_session *sess,
ip_fle->length = in_len;
DPAA2_SET_FLE_FIN(sge);
+#ifdef RTE_LIBRTE_SECURITY
/* In case of PDCP, per packet HFN is stored in
* mbuf priv after sym_op.
*/
@@ -176,6 +177,7 @@ build_proto_compound_sg_fd(dpaa2_sec_session *sess,
DPAA2_SET_FLE_INTERNAL_JD(op_fle, hfn_ovd);
DPAA2_SET_FD_INTERNAL_JD(fd, hfn_ovd);
}
+#endif
DPAA2_SET_FD_LEN(fd, ip_fle->length);
return 0;
@@ -241,6 +243,7 @@ build_proto_compound_fd(dpaa2_sec_session *sess,
DPAA2_SET_FD_LEN(fd, ip_fle->length);
DPAA2_SET_FLE_FIN(ip_fle);
+#ifdef RTE_LIBRTE_SECURITY
/* In case of PDCP, per packet HFN is stored in
* mbuf priv after sym_op.
*/
@@ -251,7 +254,7 @@ build_proto_compound_fd(dpaa2_sec_session *sess,
DPAA2_SET_FLE_INTERNAL_JD(op_fle, hfn_ovd);
DPAA2_SET_FD_INTERNAL_JD(fd, hfn_ovd);
}
-
+#endif
return 0;
}
@@ -1358,9 +1361,11 @@ build_sec_fd(struct rte_crypto_op *op,
if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION)
sess = (dpaa2_sec_session *)get_sym_session_private_data(
op->sym->session, cryptodev_driver_id);
+#ifdef RTE_LIBRTE_SECURITY
else if (op->sess_type == RTE_CRYPTO_OP_SECURITY_SESSION)
sess = (dpaa2_sec_session *)get_sec_session_private_data(
op->sym->sec_session);
+#endif
else
return -1;
@@ -1506,7 +1511,7 @@ sec_simple_fd_to_mbuf(const struct qbman_fd *fd)
struct rte_crypto_op *op;
uint16_t len = DPAA2_GET_FD_LEN(fd);
uint16_t diff = 0;
- dpaa2_sec_session *sess_priv;
+ dpaa2_sec_session *sess_priv __rte_unused;
struct rte_mbuf *mbuf = DPAA2_INLINE_MBUF_FROM_BUF(
DPAA2_IOVA_TO_VADDR(DPAA2_GET_FD_ADDR(fd)),
@@ -1519,13 +1524,14 @@ sec_simple_fd_to_mbuf(const struct qbman_fd *fd)
mbuf->buf_iova = op->sym->aead.digest.phys_addr;
op->sym->aead.digest.phys_addr = 0L;
+#ifdef RTE_LIBRTE_SECURITY
sess_priv = (dpaa2_sec_session *)get_sec_session_private_data(
op->sym->sec_session);
if (sess_priv->dir == DIR_ENC)
mbuf->data_off += SEC_FLC_DHR_OUTBOUND;
else
mbuf->data_off += SEC_FLC_DHR_INBOUND;
-
+#endif
return op;
}
@@ -1569,6 +1575,7 @@ sec_fd_to_mbuf(const struct qbman_fd *fd)
} else
dst = src;
+#ifdef RTE_LIBRTE_SECURITY
if (op->sess_type == RTE_CRYPTO_OP_SECURITY_SESSION) {
dpaa2_sec_session *sess = (dpaa2_sec_session *)
get_sec_session_private_data(op->sym->sec_session);
@@ -1583,7 +1590,7 @@ sec_fd_to_mbuf(const struct qbman_fd *fd)
dst->data_len = len;
}
}
-
+#endif
DPAA2_SEC_DP_DEBUG("mbuf %p BMAN buf addr %p,"
" fdaddr =%" PRIx64 " bpid =%d meta =%d off =%d, len =%d\n",
(void *)dst,
@@ -2500,6 +2507,7 @@ dpaa2_sec_set_session_parameters(struct rte_cryptodev *dev,
return ret;
}
+#ifdef RTE_LIBRTE_SECURITY
static int
dpaa2_sec_ipsec_aead_init(struct rte_crypto_aead_xform *aead_xform,
dpaa2_sec_session *session,
@@ -3172,7 +3180,7 @@ dpaa2_sec_security_session_destroy(void *dev __rte_unused,
}
return 0;
}
-
+#endif
static int
dpaa2_sec_sym_session_configure(struct rte_cryptodev *dev,
struct rte_crypto_sym_xform *xform,
@@ -3561,6 +3569,7 @@ static struct rte_cryptodev_ops crypto_ops = {
.sym_session_clear = dpaa2_sec_sym_session_clear,
};
+#ifdef RTE_LIBRTE_SECURITY
static const struct rte_security_capability *
dpaa2_sec_capabilities_get(void *device __rte_unused)
{
@@ -3575,6 +3584,7 @@ static const struct rte_security_ops dpaa2_sec_security_ops = {
.set_pkt_metadata = NULL,
.capabilities_get = dpaa2_sec_capabilities_get
};
+#endif
static int
dpaa2_sec_uninit(const struct rte_cryptodev *dev)
@@ -3597,7 +3607,9 @@ dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev)
struct dpaa2_sec_dev_private *internals;
struct rte_device *dev = cryptodev->device;
struct rte_dpaa2_device *dpaa2_dev;
+#ifdef RTE_LIBRTE_SECURITY
struct rte_security_ctx *security_instance;
+#endif
struct fsl_mc_io *dpseci;
uint16_t token;
struct dpseci_attr attr;
@@ -3638,7 +3650,7 @@ dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev)
DPAA2_SEC_DEBUG("Device already init by primary process");
return 0;
}
-
+#ifdef RTE_LIBRTE_SECURITY
/* Initialize security_ctx only for primary process*/
security_instance = rte_malloc("rte_security_instances_ops",
sizeof(struct rte_security_ctx), 0);
@@ -3648,7 +3660,7 @@ dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev)
security_instance->ops = &dpaa2_sec_security_ops;
security_instance->sess_cnt = 0;
cryptodev->security_ctx = security_instance;
-
+#endif
/*Open the rte device via MC and save the handle for further use*/
dpseci = (struct fsl_mc_io *)rte_calloc(NULL, 1,
sizeof(struct fsl_mc_io), 0);
diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
index ca4fcfe9b..648bf8045 100644
--- a/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
@@ -8,7 +8,9 @@
#ifndef _RTE_DPAA2_SEC_PMD_PRIVATE_H_
#define _RTE_DPAA2_SEC_PMD_PRIVATE_H_
+#ifdef RTE_LIBRTE_SECURITY
#include <rte_security_driver.h>
+#endif
#define CRYPTODEV_NAME_DPAA2_SEC_PMD crypto_dpaa2_sec
/**< NXP DPAA2 - SEC PMD device name */
@@ -139,6 +141,7 @@ struct dpaa2_sec_aead_ctxt {
uint8_t auth_cipher_text; /**< Authenticate/cipher ordering */
};
+#ifdef RTE_LIBRTE_SECURITY
/*
* The structure is to be filled by user for PDCP Protocol
*/
@@ -154,7 +157,7 @@ struct dpaa2_pdcp_ctxt {
uint32_t hfn; /*!< Hyper Frame Number */
uint32_t hfn_threshold; /*!< HFN Threashold for key renegotiation */
};
-
+#endif
typedef struct dpaa2_sec_session_entry {
void *ctxt;
uint8_t ctxt_type;
@@ -190,7 +193,9 @@ typedef struct dpaa2_sec_session_entry {
struct dpaa2_sec_aead_ctxt aead_ctxt;
} ext_params;
};
+#ifdef RTE_LIBRTE_SECURITY
struct dpaa2_pdcp_ctxt pdcp;
+#endif
};
} dpaa2_sec_session;
@@ -504,6 +509,8 @@ static const struct rte_cryptodev_capabilities dpaa2_sec_capabilities[] = {
RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
};
+#ifdef RTE_LIBRTE_SECURITY
+
static const struct rte_cryptodev_capabilities dpaa2_pdcp_capabilities[] = {
{ /* SNOW 3G (UIA2) */
.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
@@ -705,7 +712,7 @@ static const struct rte_security_capability dpaa2_sec_security_cap[] = {
.action = RTE_SECURITY_ACTION_TYPE_NONE
}
};
-
+#endif
/**
* Checksum
*
diff --git a/drivers/crypto/dpaa_sec/dpaa_sec.c b/drivers/crypto/dpaa_sec/dpaa_sec.c
index 7c37136fa..4adaadf5f 100644
--- a/drivers/crypto/dpaa_sec/dpaa_sec.c
+++ b/drivers/crypto/dpaa_sec/dpaa_sec.c
@@ -15,7 +15,9 @@
#include <rte_cryptodev_pmd.h>
#include <rte_crypto.h>
#include <rte_cryptodev.h>
+#ifdef RTE_LIBRTE_SECURITY
#include <rte_security_driver.h>
+#endif
#include <rte_cycles.h>
#include <rte_dev.h>
#include <rte_kvargs.h>
@@ -252,6 +254,7 @@ static inline int is_decode(dpaa_sec_session *ses)
return ses->dir == DIR_DEC;
}
+#ifdef RTE_LIBRTE_SECURITY
static int
dpaa_sec_prep_pdcp_cdb(dpaa_sec_session *ses)
{
@@ -355,7 +358,6 @@ dpaa_sec_prep_pdcp_cdb(dpaa_sec_session *ses)
ses->pdcp.hfn_threshold,
&cipherdata, p_authdata, 0);
}
-
return shared_desc_len;
}
@@ -432,7 +434,7 @@ dpaa_sec_prep_ipsec_cdb(dpaa_sec_session *ses)
}
return shared_desc_len;
}
-
+#endif
/* prepare command block of the session */
static int
dpaa_sec_prep_cdb(dpaa_sec_session *ses)
@@ -450,12 +452,14 @@ dpaa_sec_prep_cdb(dpaa_sec_session *ses)
memset(cdb, 0, sizeof(struct sec_cdb));
switch (ses->ctxt) {
+#ifdef RTE_LIBRTE_SECURITY
case DPAA_SEC_IPSEC:
shared_desc_len = dpaa_sec_prep_ipsec_cdb(ses);
break;
case DPAA_SEC_PDCP:
shared_desc_len = dpaa_sec_prep_pdcp_cdb(ses);
break;
+#endif
case DPAA_SEC_CIPHER:
alginfo_c.key = (size_t)ses->cipher_key.data;
alginfo_c.keylen = ses->cipher_key.length;
@@ -1753,11 +1757,13 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops,
op->sym->session,
cryptodev_driver_id);
break;
+#ifdef RTE_LIBRTE_SECURITY
case RTE_CRYPTO_OP_SECURITY_SESSION:
ses = (dpaa_sec_session *)
get_sec_session_private_data(
op->sym->sec_session);
break;
+#endif
default:
DPAA_SEC_DP_ERR(
"sessionless crypto op not supported");
@@ -1877,6 +1883,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops,
((auth_tail_len << 16) | auth_hdr_len);
}
+#ifdef RTE_LIBRTE_SECURITY
/* In case of PDCP, per packet HFN is stored in
* mbuf priv after sym_op.
*/
@@ -1889,7 +1896,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops,
ses->pdcp.hfn_ovd_offset)),
ses->pdcp.hfn_ovd);
}
-
+#endif
}
send_pkts:
loop = 0;
@@ -2483,6 +2490,7 @@ dpaa_sec_sym_session_clear(struct rte_cryptodev *dev,
}
}
+#ifdef RTE_LIBRTE_SECURITY
static int
dpaa_sec_set_ipsec_session(__rte_unused struct rte_cryptodev *dev,
struct rte_security_session_conf *conf,
@@ -2906,7 +2914,7 @@ dpaa_sec_security_session_destroy(void *dev __rte_unused,
}
return 0;
}
-
+#endif
static int
dpaa_sec_dev_configure(struct rte_cryptodev *dev __rte_unused,
struct rte_cryptodev_config *config __rte_unused)
@@ -3152,6 +3160,7 @@ static struct rte_cryptodev_ops crypto_ops = {
.sym_session_clear = dpaa_sec_sym_session_clear
};
+#ifdef RTE_LIBRTE_SECURITY
static const struct rte_security_capability *
dpaa_sec_capabilities_get(void *device __rte_unused)
{
@@ -3166,7 +3175,7 @@ static const struct rte_security_ops dpaa_sec_security_ops = {
.set_pkt_metadata = NULL,
.capabilities_get = dpaa_sec_capabilities_get
};
-
+#endif
static int
dpaa_sec_uninit(struct rte_cryptodev *dev)
{
@@ -3190,7 +3199,9 @@ static int
dpaa_sec_dev_init(struct rte_cryptodev *cryptodev)
{
struct dpaa_sec_dev_private *internals;
+#ifdef RTE_LIBRTE_SECURITY
struct rte_security_ctx *security_instance;
+#endif
struct dpaa_sec_qp *qp;
uint32_t i, flags;
int ret;
@@ -3225,7 +3236,7 @@ dpaa_sec_dev_init(struct rte_cryptodev *cryptodev)
DPAA_SEC_WARN("Device already init by primary process");
return 0;
}
-
+#ifdef RTE_LIBRTE_SECURITY
/* Initialize security_ctx only for primary process*/
security_instance = rte_malloc("rte_security_instances_ops",
sizeof(struct rte_security_ctx), 0);
@@ -3235,7 +3246,7 @@ dpaa_sec_dev_init(struct rte_cryptodev *cryptodev)
security_instance->ops = &dpaa_sec_security_ops;
security_instance->sess_cnt = 0;
cryptodev->security_ctx = security_instance;
-
+#endif
rte_spinlock_init(&internals->lock);
for (i = 0; i < internals->max_nb_queue_pairs; i++) {
/* init qman fq for queue pair */
diff --git a/drivers/crypto/dpaa_sec/dpaa_sec.h b/drivers/crypto/dpaa_sec/dpaa_sec.h
index a661d5a56..85aa6f6a0 100644
--- a/drivers/crypto/dpaa_sec/dpaa_sec.h
+++ b/drivers/crypto/dpaa_sec/dpaa_sec.h
@@ -98,7 +98,7 @@ struct sec_cdb {
uint32_t sh_desc[DPAA_SEC_MAX_DESC_SIZE];
};
-
+#ifdef RTE_LIBRTE_SECURITY
/*!
* The structure is to be filled by user as a part of
* dpaa_sec_proto_ctxt for PDCP Protocol
@@ -115,14 +115,16 @@ struct sec_pdcp_ctxt {
uint32_t hfn; /*!< Hyper Frame Number */
uint32_t hfn_threshold; /*!< HFN Threashold for key renegotiation */
};
-
+#endif
typedef struct dpaa_sec_session_entry {
uint8_t dir; /*!< Operation Direction */
uint8_t ctxt; /*!< Session Context Type */
enum rte_crypto_cipher_algorithm cipher_alg; /*!< Cipher Algorithm*/
enum rte_crypto_auth_algorithm auth_alg; /*!< Authentication Algorithm*/
enum rte_crypto_aead_algorithm aead_alg; /*!< AEAD Algorithm*/
+#ifdef RTE_LIBRTE_SECURITY
enum rte_security_session_protocol proto_alg; /*!< Security Algorithm*/
+#endif
union {
struct {
uint8_t *data; /**< pointer to key data */
@@ -163,7 +165,9 @@ typedef struct dpaa_sec_session_entry {
uint8_t auth_cipher_text;
/**< Authenticate/cipher ordering */
};
+#ifdef RTE_LIBRTE_SECURITY
struct sec_pdcp_ctxt pdcp;
+#endif
};
struct dpaa_sec_qp *qp[MAX_DPAA_CORES];
struct qman_fq *inq[MAX_DPAA_CORES];
@@ -679,6 +683,7 @@ static const struct rte_cryptodev_capabilities dpaa_pdcp_capabilities[] = {
RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
};
+#ifdef RTE_LIBRTE_SECURITY
static const struct rte_security_capability dpaa_sec_security_cap[] = {
{ /* IPsec Lookaside Protocol offload ESP Transport Egress */
.action = RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL,
@@ -722,6 +727,7 @@ static const struct rte_security_capability dpaa_sec_security_cap[] = {
.action = RTE_SECURITY_ACTION_TYPE_NONE
}
};
+#endif
/**
* Checksum
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index e79f16e28..063c4605b 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -275,14 +275,14 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NITROX) += -lrte_pmd_nitrox
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO) += -lrte_pmd_octeontx_crypto
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_CRYPTO) += -lrte_pmd_octeontx2_crypto
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += -lrte_pmd_crypto_scheduler
-ifeq ($(CONFIG_RTE_LIBRTE_SECURITY),y)
ifeq ($(CONFIG_RTE_EAL_VFIO)$(CONFIG_RTE_LIBRTE_FSLMC_BUS),yy)
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += -lrte_pmd_dpaa2_sec
endif # CONFIG_RTE_LIBRTE_FSLMC_BUS
ifeq ($(CONFIG_RTE_LIBRTE_DPAA_BUS),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_DPAA_SEC) += -lrte_pmd_dpaa_sec
-_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_CAAM_JR) += -lrte_pmd_caam_jr
endif # CONFIG_RTE_LIBRTE_DPAA_BUS
+ifeq ($(CONFIG_RTE_LIBRTE_SECURITY),y)
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_CAAM_JR) += -lrte_pmd_caam_jr
endif # CONFIG_RTE_LIBRTE_SECURITY
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO) += -lrte_pmd_virtio_crypto
endif # CONFIG_RTE_LIBRTE_CRYPTODEV
--
2.17.1
next prev parent reply other threads:[~2019-10-18 7:59 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-18 7:56 [dpdk-dev] [PATCH] test/crypto: fix compilation issue " Hemant Agrawal
2019-10-18 7:56 ` [dpdk-dev] [PATCH] app/proc-info: fix compilation with no security Hemant Agrawal
2019-10-18 8:09 ` Thierry Herbelot
2019-10-23 14:46 ` Akhil Goyal
2019-10-23 14:48 ` Akhil Goyal
2019-10-18 7:56 ` Hemant Agrawal [this message]
2019-10-18 8:11 ` [dpdk-dev] [PATCH] crypto/dpaa_sec: enable compilation without security Thierry Herbelot
2019-10-23 14:45 ` Akhil Goyal
2019-10-18 8:07 ` [dpdk-dev] [PATCH] test/crypto: fix compilation issue " Thierry Herbelot
2019-10-23 14:48 ` Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191018075613.2784-3-hemant.agrawal@nxp.com \
--to=hemant.agrawal@nxp.com \
--cc=akhil.goyal@nxp.com \
--cc=dev@dpdk.org \
--cc=thierry.herbelot@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).