[dpdk-dev] [PATCH] vhost: fix vhost user virtqueue not accessable

[dpdk-dev] [PATCH] vhost: fix vhost user virtqueue not accessable

[Marvin Liu]

Log feature is disabled in vhost user, so that log address was invalid
when checking. Add feature bit check can skip useless address check.

Fixes: 04cfc7fdbfca ("vhost: translate incoming log address to gpa")

Signed-off-by: Marvin Liu <yong.liu@intel.com>
---
 lib/librte_vhost/vhost_user.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/lib/librte_vhost/vhost_user.c b/lib/librte_vhost/vhost_user.c
index 61ef699ac..0407fdc29 100644
--- a/lib/librte_vhost/vhost_user.c
+++ b/lib/librte_vhost/vhost_user.c
@@ -741,13 +741,15 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
 		vq->last_avail_idx = vq->used->idx;
 	}
 
-	vq->log_guest_addr =
-		translate_log_addr(dev, vq, addr->log_guest_addr);
-	if (vq->log_guest_addr == 0) {
-		RTE_LOG(DEBUG, VHOST_CONFIG,
-			"(%d) failed to map log_guest_addr .\n",
-			dev->vid);
-		return dev;
+	if (dev->features & (1ULL << VHOST_F_LOG_ALL)) {
+		vq->log_guest_addr =
+			translate_log_addr(dev, vq, addr->log_guest_addr);
+		if (vq->log_guest_addr == 0) {
+			RTE_LOG(DEBUG, VHOST_CONFIG,
+				"(%d) failed to map log_guest_addr .\n",
+				dev->vid);
+			return dev;
+		}
 	}
 	vq->access_ok = 1;
 
-- 
2.17.1

Re: [dpdk-dev] [PATCH] vhost: fix vhost user virtqueue not accessable

[Adrian Moreno]

Hi Marvin,

On 10/25/19 6:20 PM, Marvin Liu wrote:
> Log feature is disabled in vhost user, so that log address was invalid
> when checking. Add feature bit check can skip useless address check.
>
Just so I understand, what conditions is the log address invalid?

> Fixes: 04cfc7fdbfca ("vhost: translate incoming log address to gpa")
> 
> Signed-off-by: Marvin Liu <yong.liu@intel.com>
> ---
>  lib/librte_vhost/vhost_user.c | 16 +++++++++-------
>  1 file changed, 9 insertions(+), 7 deletions(-)
> 
> diff --git a/lib/librte_vhost/vhost_user.c b/lib/librte_vhost/vhost_user.c
> index 61ef699ac..0407fdc29 100644
> --- a/lib/librte_vhost/vhost_user.c
> +++ b/lib/librte_vhost/vhost_user.c
> @@ -741,13 +741,15 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
>  		vq->last_avail_idx = vq->used->idx;
>  	}
>  
> -	vq->log_guest_addr =
> -		translate_log_addr(dev, vq, addr->log_guest_addr);
> -	if (vq->log_guest_addr == 0) {
> -		RTE_LOG(DEBUG, VHOST_CONFIG,
> -			"(%d) failed to map log_guest_addr .\n",
> -			dev->vid);
> -		return dev;
> +	if (dev->features & (1ULL << VHOST_F_LOG_ALL)) {
> +		vq->log_guest_addr =
> +			translate_log_addr(dev, vq, addr->log_guest_addr);

VHOST_F_LOG_ALL is only negotiated once the migration has started (at least from
qemu's perspective).
That means that we will postponing the translation  of the log address to the
vhost_user_set_vring_addr() call that follows the VHOST_F_LOG_ALL enabling. In
that call there are (at least) two things that could go wrong and lead to a
migration failure:
- If VHOST_USER_F_PROTOCOL_FEATURES is not enabled, the address won't be translated:

vhost_user:795
	if ((vq->enabled && (dev->features &
				(1ULL << VHOST_USER_F_PROTOCOL_FEATURES))) ||
			access_ok) {
		dev = translate_ring_addresses(dev, msg->payload.addr.index);
		if (!dev)
			return RTE_VHOST_MSG_RESULT_ERR;

		*pdev = dev;
	}

- If the IOMMU is enabled and there's a miss, we would have to wait for the
IOTLB_UPDATE and during that time, there would be failed accesses to the (still
untranslated) log address.



> +		if (vq->log_guest_addr == 0) {
> +			RTE_LOG(DEBUG, VHOST_CONFIG,
> +				"(%d) failed to map log_guest_addr .\n",
> +				dev->vid);
> +			return dev;
> +		}
>  	}
>  	vq->access_ok = 1;
>  
> 
Thanks,
Adrian

Re: [dpdk-dev] [PATCH] vhost: fix vhost user virtqueue not accessable

[Liu, Yong]

> -----Original Message-----
> From: Adrian Moreno [mailto:amorenoz@redhat.com]
> Sent: Friday, October 25, 2019 8:21 PM
> To: Liu, Yong <yong.liu@intel.com>; maxime.coquelin@redhat.com; Bie, Tiwei
> <tiwei.bie@intel.com>; Wang, Zhihong <zhihong.wang@intel.com>
> Cc: dev@dpdk.org
> Subject: Re: [PATCH] vhost: fix vhost user virtqueue not accessable
> 
> Hi Marvin,
> 
> On 10/25/19 6:20 PM, Marvin Liu wrote:
> > Log feature is disabled in vhost user, so that log address was invalid
> > when checking. Add feature bit check can skip useless address check.
> >
> Just so I understand, what conditions is the log address invalid?
> 
> > Fixes: 04cfc7fdbfca ("vhost: translate incoming log address to gpa")
> >
> > Signed-off-by: Marvin Liu <yong.liu@intel.com>
> > ---
> >  lib/librte_vhost/vhost_user.c | 16 +++++++++-------
> >  1 file changed, 9 insertions(+), 7 deletions(-)
> >
> > diff --git a/lib/librte_vhost/vhost_user.c
> b/lib/librte_vhost/vhost_user.c
> > index 61ef699ac..0407fdc29 100644
> > --- a/lib/librte_vhost/vhost_user.c
> > +++ b/lib/librte_vhost/vhost_user.c
> > @@ -741,13 +741,15 @@ translate_ring_addresses(struct virtio_net *dev,
> int vq_index)
> >  		vq->last_avail_idx = vq->used->idx;
> >  	}
> >
> > -	vq->log_guest_addr =
> > -		translate_log_addr(dev, vq, addr->log_guest_addr);
> > -	if (vq->log_guest_addr == 0) {
> > -		RTE_LOG(DEBUG, VHOST_CONFIG,
> > -			"(%d) failed to map log_guest_addr .\n",
> > -			dev->vid);
> > -		return dev;
> > +	if (dev->features & (1ULL << VHOST_F_LOG_ALL)) {
> > +		vq->log_guest_addr =
> > +			translate_log_addr(dev, vq, addr->log_guest_addr);
> 
> VHOST_F_LOG_ALL is only negotiated once the migration has started (at least
> from
> qemu's perspective).
> That means that we will postponing the translation  of the log address to
> the
> vhost_user_set_vring_addr() call that follows the VHOST_F_LOG_ALL enabling.
> In
> that call there are (at least) two things that could go wrong and lead to a
> migration failure:
> - If VHOST_USER_F_PROTOCOL_FEATURES is not enabled, the address won't be
> translated:
> 
> vhost_user:795
> 	if ((vq->enabled && (dev->features &
> 				(1ULL << VHOST_USER_F_PROTOCOL_FEATURES))) ||
> 			access_ok) {
> 		dev = translate_ring_addresses(dev, msg->payload.addr.index);
> 		if (!dev)
> 			return RTE_VHOST_MSG_RESULT_ERR;
> 
> 		*pdev = dev;
> 	}
> 
> - If the IOMMU is enabled and there's a miss, we would have to wait for the
> IOTLB_UPDATE and during that time, there would be failed accesses to the
> (still
> untranslated) log address.
> 
> 

Thanks, Adrian. 
Log address can be zero when logging is not enabled.
How about add other criteria after translation? Log address will be translated anyway and not affect vq status.

        vq->log_guest_addr =
                translate_log_addr(dev, vq, addr->log_guest_addr);
-       if (vq->log_guest_addr == 0) {
+       if (vq->log_guest_addr == 0 && addr->flags) {
                RTE_LOG(DEBUG, VHOST_CONFIG,
                        "(%d) failed to map log_guest_addr .\n",
                        dev->vid);
                return dev;
        }

Meanwhile, log address of packed ring is fixed to zero. Is any special reason to do that? 

Regards,
Marvin

> 
> > +		if (vq->log_guest_addr == 0) {
> > +			RTE_LOG(DEBUG, VHOST_CONFIG,
> > +				"(%d) failed to map log_guest_addr .\n",
> > +				dev->vid);
> > +			return dev;
> > +		}
> >  	}
> >  	vq->access_ok = 1;
> >
> >
> Thanks,
> Adrian

Re: [dpdk-dev] [PATCH] vhost: fix vhost user virtqueue not accessable

[Adrian Moreno]

On 10/28/19 3:13 AM, Liu, Yong wrote:
> 
> 
>> -----Original Message-----
>> From: Adrian Moreno [mailto:amorenoz@redhat.com]
>> Sent: Friday, October 25, 2019 8:21 PM
>> To: Liu, Yong <yong.liu@intel.com>; maxime.coquelin@redhat.com; Bie, Tiwei
>> <tiwei.bie@intel.com>; Wang, Zhihong <zhihong.wang@intel.com>
>> Cc: dev@dpdk.org
>> Subject: Re: [PATCH] vhost: fix vhost user virtqueue not accessable
>>
>> Hi Marvin,
>>
>> On 10/25/19 6:20 PM, Marvin Liu wrote:
>>> Log feature is disabled in vhost user, so that log address was invalid
>>> when checking. Add feature bit check can skip useless address check.
>>>
>> Just so I understand, what conditions is the log address invalid?
>>
>>> Fixes: 04cfc7fdbfca ("vhost: translate incoming log address to gpa")
>>>
>>> Signed-off-by: Marvin Liu <yong.liu@intel.com>
>>> ---
>>>  lib/librte_vhost/vhost_user.c | 16 +++++++++-------
>>>  1 file changed, 9 insertions(+), 7 deletions(-)
>>>
>>> diff --git a/lib/librte_vhost/vhost_user.c
>> b/lib/librte_vhost/vhost_user.c
>>> index 61ef699ac..0407fdc29 100644
>>> --- a/lib/librte_vhost/vhost_user.c
>>> +++ b/lib/librte_vhost/vhost_user.c
>>> @@ -741,13 +741,15 @@ translate_ring_addresses(struct virtio_net *dev,
>> int vq_index)
>>>  		vq->last_avail_idx = vq->used->idx;
>>>  	}
>>>
>>> -	vq->log_guest_addr =
>>> -		translate_log_addr(dev, vq, addr->log_guest_addr);
>>> -	if (vq->log_guest_addr == 0) {
>>> -		RTE_LOG(DEBUG, VHOST_CONFIG,
>>> -			"(%d) failed to map log_guest_addr .\n",
>>> -			dev->vid);
>>> -		return dev;
>>> +	if (dev->features & (1ULL << VHOST_F_LOG_ALL)) {
>>> +		vq->log_guest_addr =
>>> +			translate_log_addr(dev, vq, addr->log_guest_addr);
>>
>> VHOST_F_LOG_ALL is only negotiated once the migration has started (at least
>> from
>> qemu's perspective).
>> That means that we will postponing the translation  of the log address to
>> the
>> vhost_user_set_vring_addr() call that follows the VHOST_F_LOG_ALL enabling.
>> In
>> that call there are (at least) two things that could go wrong and lead to a
>> migration failure:
>> - If VHOST_USER_F_PROTOCOL_FEATURES is not enabled, the address won't be
>> translated:
>>
>> vhost_user:795
>> 	if ((vq->enabled && (dev->features &
>> 				(1ULL << VHOST_USER_F_PROTOCOL_FEATURES))) ||
>> 			access_ok) {
>> 		dev = translate_ring_addresses(dev, msg->payload.addr.index);
>> 		if (!dev)
>> 			return RTE_VHOST_MSG_RESULT_ERR;
>>
>> 		*pdev = dev;
>> 	}
>>
>> - If the IOMMU is enabled and there's a miss, we would have to wait for the
>> IOTLB_UPDATE and during that time, there would be failed accesses to the
>> (still
>> untranslated) log address.
>>
>>
> 
> Thanks, Adrian. 
> Log address can be zero when logging is not enabled.
> How about add other criteria after translation? Log address will be translated anyway and not affect vq status.
> 
>         vq->log_guest_addr =
>                 translate_log_addr(dev, vq, addr->log_guest_addr);
> -       if (vq->log_guest_addr == 0) {
> +       if (vq->log_guest_addr == 0 && addr->flags) {
>                 RTE_LOG(DEBUG, VHOST_CONFIG,
>                         "(%d) failed to map log_guest_addr .\n",
>                         dev->vid);
>                 return dev;
>         }
> 
That makes perfect sense IMHO. Thank you.

> Meanwhile, log address of packed ring is fixed to zero. Is any special reason to do that? 
> 
No idea to be honest.

Thanks.
Adrian
> Regards,
> Marvin
> 
>>
>>> +		if (vq->log_guest_addr == 0) {
>>> +			RTE_LOG(DEBUG, VHOST_CONFIG,
>>> +				"(%d) failed to map log_guest_addr .\n",
>>> +				dev->vid);
>>> +			return dev;
>>> +		}
>>>  	}
>>>  	vq->access_ok = 1;
>>>
>>>
>> Thanks,
>> Adrian

[dpdk-dev] [PATCH v2] vhost: fix vhost user virtqueue not accessible

[Marvin Liu]

Log feature is disabled in vhost user, so that log address was invalid
when checking. Check whether log address is valid can workaround it.
Also log address should be translated in packed ring virtqueue.

Fixes: 04cfc7fdbfca ("vhost: translate incoming log address to gpa")

Signed-off-by: Marvin Liu <yong.liu@intel.com>
---
 lib/librte_vhost/vhost_user.c | 30 +++++++++++++-----------------
 1 file changed, 13 insertions(+), 17 deletions(-)

diff --git a/lib/librte_vhost/vhost_user.c b/lib/librte_vhost/vhost_user.c
index 61ef699ac..759cc795c 100644
--- a/lib/librte_vhost/vhost_user.c
+++ b/lib/librte_vhost/vhost_user.c
@@ -641,11 +641,23 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
 	struct vhost_vring_addr *addr = &vq->ring_addrs;
 	uint64_t len, expected_len;
 
+	dev = numa_realloc(dev, vq_index);
+	vq = dev->virtqueue[vq_index];
+	if (addr->log_guest_addr) {
+		vq->log_guest_addr =
+			translate_log_addr(dev, vq, addr->log_guest_addr);
+		if (vq->log_guest_addr == 0) {
+			RTE_LOG(DEBUG, VHOST_CONFIG,
+					"(%d) failed to map log_guest_addr.\n",
+					dev->vid);
+			return dev;
+		}
+	}
+
 	if (vq_is_packed(dev)) {
 		len = sizeof(struct vring_packed_desc) * vq->size;
 		vq->desc_packed = (struct vring_packed_desc *)(uintptr_t)
 			ring_addr_to_vva(dev, vq, addr->desc_user_addr, &len);
-		vq->log_guest_addr = 0;
 		if (vq->desc_packed == NULL ||
 				len != sizeof(struct vring_packed_desc) *
 				vq->size) {
@@ -655,10 +667,6 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
 			return dev;
 		}
 
-		dev = numa_realloc(dev, vq_index);
-		vq = dev->virtqueue[vq_index];
-		addr = &vq->ring_addrs;
-
 		len = sizeof(struct vring_packed_desc_event);
 		vq->driver_event = (struct vring_packed_desc_event *)
 					(uintptr_t)ring_addr_to_vva(dev,
@@ -701,10 +709,6 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
 		return dev;
 	}
 
-	dev = numa_realloc(dev, vq_index);
-	vq = dev->virtqueue[vq_index];
-	addr = &vq->ring_addrs;
-
 	len = sizeof(struct vring_avail) + sizeof(uint16_t) * vq->size;
 	if (dev->features & (1ULL << VIRTIO_RING_F_EVENT_IDX))
 		len += sizeof(uint16_t);
@@ -741,14 +745,6 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
 		vq->last_avail_idx = vq->used->idx;
 	}
 
-	vq->log_guest_addr =
-		translate_log_addr(dev, vq, addr->log_guest_addr);
-	if (vq->log_guest_addr == 0) {
-		RTE_LOG(DEBUG, VHOST_CONFIG,
-			"(%d) failed to map log_guest_addr .\n",
-			dev->vid);
-		return dev;
-	}
 	vq->access_ok = 1;
 
 	VHOST_LOG_DEBUG(VHOST_CONFIG, "(%d) mapped address desc: %p\n",
-- 
2.17.1

Re: [dpdk-dev] [PATCH v2] vhost: fix vhost user virtqueue not accessible

[Tiwei Bie]

On Wed, Oct 30, 2019 at 07:07:23PM +0800, Marvin Liu wrote:
> Log feature is disabled in vhost user, so that log address was invalid
> when checking. Check whether log address is valid can workaround it.
> Also log address should be translated in packed ring virtqueue.
> 
> Fixes: 04cfc7fdbfca ("vhost: translate incoming log address to gpa")
> 
> Signed-off-by: Marvin Liu <yong.liu@intel.com>
> ---
>  lib/librte_vhost/vhost_user.c | 30 +++++++++++++-----------------
>  1 file changed, 13 insertions(+), 17 deletions(-)
> 
> diff --git a/lib/librte_vhost/vhost_user.c b/lib/librte_vhost/vhost_user.c
> index 61ef699ac..759cc795c 100644
> --- a/lib/librte_vhost/vhost_user.c
> +++ b/lib/librte_vhost/vhost_user.c
> @@ -641,11 +641,23 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
>  	struct vhost_vring_addr *addr = &vq->ring_addrs;
>  	uint64_t len, expected_len;
>  
> +	dev = numa_realloc(dev, vq_index);
> +	vq = dev->virtqueue[vq_index];
> +	if (addr->log_guest_addr) {

Please use VHOST_VRING_F_LOG to check whether log address
is valid or not.

Thanks,
Tiwei

[dpdk-dev] [PATCH v3] vhost: fix vhost user virtqueue not accessible

[Marvin Liu]

Log feature is disabled in vhost user, so that log address was invalid
when checking. Check whether log address is valid can workaround it.
Also log address should be translated in packed ring virtqueue.

Fixes: 04cfc7fdbfca ("vhost: translate incoming log address to gpa")

Signed-off-by: Marvin Liu <yong.liu@intel.com>
---
 lib/librte_vhost/vhost_user.c | 30 +++++++++++++-----------------
 1 file changed, 13 insertions(+), 17 deletions(-)

diff --git a/lib/librte_vhost/vhost_user.c b/lib/librte_vhost/vhost_user.c
index 61ef699ac..7754d2467 100644
--- a/lib/librte_vhost/vhost_user.c
+++ b/lib/librte_vhost/vhost_user.c
@@ -641,11 +641,23 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
 	struct vhost_vring_addr *addr = &vq->ring_addrs;
 	uint64_t len, expected_len;
 
+	dev = numa_realloc(dev, vq_index);
+	vq = dev->virtqueue[vq_index];
+	if (addr->flags & (1 << VHOST_VRING_F_LOG)) {
+		vq->log_guest_addr =
+			translate_log_addr(dev, vq, addr->log_guest_addr);
+		if (vq->log_guest_addr == 0) {
+			RTE_LOG(DEBUG, VHOST_CONFIG,
+					"(%d) failed to map log_guest_addr.\n",
+					dev->vid);
+			return dev;
+		}
+	}
+
 	if (vq_is_packed(dev)) {
 		len = sizeof(struct vring_packed_desc) * vq->size;
 		vq->desc_packed = (struct vring_packed_desc *)(uintptr_t)
 			ring_addr_to_vva(dev, vq, addr->desc_user_addr, &len);
-		vq->log_guest_addr = 0;
 		if (vq->desc_packed == NULL ||
 				len != sizeof(struct vring_packed_desc) *
 				vq->size) {
@@ -655,10 +667,6 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
 			return dev;
 		}
 
-		dev = numa_realloc(dev, vq_index);
-		vq = dev->virtqueue[vq_index];
-		addr = &vq->ring_addrs;
-
 		len = sizeof(struct vring_packed_desc_event);
 		vq->driver_event = (struct vring_packed_desc_event *)
 					(uintptr_t)ring_addr_to_vva(dev,
@@ -701,10 +709,6 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
 		return dev;
 	}
 
-	dev = numa_realloc(dev, vq_index);
-	vq = dev->virtqueue[vq_index];
-	addr = &vq->ring_addrs;
-
 	len = sizeof(struct vring_avail) + sizeof(uint16_t) * vq->size;
 	if (dev->features & (1ULL << VIRTIO_RING_F_EVENT_IDX))
 		len += sizeof(uint16_t);
@@ -741,14 +745,6 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
 		vq->last_avail_idx = vq->used->idx;
 	}
 
-	vq->log_guest_addr =
-		translate_log_addr(dev, vq, addr->log_guest_addr);
-	if (vq->log_guest_addr == 0) {
-		RTE_LOG(DEBUG, VHOST_CONFIG,
-			"(%d) failed to map log_guest_addr .\n",
-			dev->vid);
-		return dev;
-	}
 	vq->access_ok = 1;
 
 	VHOST_LOG_DEBUG(VHOST_CONFIG, "(%d) mapped address desc: %p\n",
-- 
2.17.1

Re: [dpdk-dev] [PATCH v3] vhost: fix vhost user virtqueue not accessible

[Tiwei Bie]

On Wed, Oct 30, 2019 at 10:56:02PM +0800, Marvin Liu wrote:
> Log feature is disabled in vhost user, so that log address was invalid
> when checking. Check whether log address is valid can workaround it.
> Also log address should be translated in packed ring virtqueue.
> 
> Fixes: 04cfc7fdbfca ("vhost: translate incoming log address to gpa")
> 
> Signed-off-by: Marvin Liu <yong.liu@intel.com>
> ---
>  lib/librte_vhost/vhost_user.c | 30 +++++++++++++-----------------
>  1 file changed, 13 insertions(+), 17 deletions(-)
> 
> diff --git a/lib/librte_vhost/vhost_user.c b/lib/librte_vhost/vhost_user.c
> index 61ef699ac..7754d2467 100644
> --- a/lib/librte_vhost/vhost_user.c
> +++ b/lib/librte_vhost/vhost_user.c
> @@ -641,11 +641,23 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
>  	struct vhost_vring_addr *addr = &vq->ring_addrs;
>  	uint64_t len, expected_len;
>  
> +	dev = numa_realloc(dev, vq_index);

We need to update `vq->desc` first before doing numa_realloc.
https://github.com/DPDK/dpdk/blob/19397c7bf2545e6adab41b657a1f1da3c7344e7b/lib/librte_vhost/vhost_user.c#L445

> +	vq = dev->virtqueue[vq_index];
> +	if (addr->flags & (1 << VHOST_VRING_F_LOG)) {

`vq` can be reallocated by numa_realloc.
We need to update the `addr` pointer before using it.

Thanks,
Tiwei


> +		vq->log_guest_addr =
> +			translate_log_addr(dev, vq, addr->log_guest_addr);
> +		if (vq->log_guest_addr == 0) {
> +			RTE_LOG(DEBUG, VHOST_CONFIG,
> +					"(%d) failed to map log_guest_addr.\n",
> +					dev->vid);
> +			return dev;
> +		}
> +	}
> +
>  	if (vq_is_packed(dev)) {
>  		len = sizeof(struct vring_packed_desc) * vq->size;
>  		vq->desc_packed = (struct vring_packed_desc *)(uintptr_t)
>  			ring_addr_to_vva(dev, vq, addr->desc_user_addr, &len);
> -		vq->log_guest_addr = 0;
>  		if (vq->desc_packed == NULL ||
>  				len != sizeof(struct vring_packed_desc) *
>  				vq->size) {
> @@ -655,10 +667,6 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
>  			return dev;
>  		}
>  
> -		dev = numa_realloc(dev, vq_index);
> -		vq = dev->virtqueue[vq_index];
> -		addr = &vq->ring_addrs;
> -
>  		len = sizeof(struct vring_packed_desc_event);
>  		vq->driver_event = (struct vring_packed_desc_event *)
>  					(uintptr_t)ring_addr_to_vva(dev,
> @@ -701,10 +709,6 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
>  		return dev;
>  	}
>  
> -	dev = numa_realloc(dev, vq_index);
> -	vq = dev->virtqueue[vq_index];
> -	addr = &vq->ring_addrs;
> -
>  	len = sizeof(struct vring_avail) + sizeof(uint16_t) * vq->size;
>  	if (dev->features & (1ULL << VIRTIO_RING_F_EVENT_IDX))
>  		len += sizeof(uint16_t);
> @@ -741,14 +745,6 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
>  		vq->last_avail_idx = vq->used->idx;
>  	}
>  
> -	vq->log_guest_addr =
> -		translate_log_addr(dev, vq, addr->log_guest_addr);
> -	if (vq->log_guest_addr == 0) {
> -		RTE_LOG(DEBUG, VHOST_CONFIG,
> -			"(%d) failed to map log_guest_addr .\n",
> -			dev->vid);
> -		return dev;
> -	}
>  	vq->access_ok = 1;
>  
>  	VHOST_LOG_DEBUG(VHOST_CONFIG, "(%d) mapped address desc: %p\n",
> -- 
> 2.17.1
> 

Re: [dpdk-dev] [PATCH v3] vhost: fix vhost user virtqueue not accessible

[Liu, Yong]

> -----Original Message-----
> From: Bie, Tiwei
> Sent: Thursday, October 31, 2019 6:42 PM
> To: Liu, Yong <yong.liu@intel.com>
> Cc: maxime.coquelin@redhat.com; Wang, Zhihong <zhihong.wang@intel.com>;
> amorenoz@redhat.com; dev@dpdk.org
> Subject: Re: [PATCH v3] vhost: fix vhost user virtqueue not accessible
> 
> On Wed, Oct 30, 2019 at 10:56:02PM +0800, Marvin Liu wrote:
> > Log feature is disabled in vhost user, so that log address was invalid
> > when checking. Check whether log address is valid can workaround it.
> > Also log address should be translated in packed ring virtqueue.
> >
> > Fixes: 04cfc7fdbfca ("vhost: translate incoming log address to gpa")
> >
> > Signed-off-by: Marvin Liu <yong.liu@intel.com>
> > ---
> >  lib/librte_vhost/vhost_user.c | 30 +++++++++++++-----------------
> >  1 file changed, 13 insertions(+), 17 deletions(-)
> >
> > diff --git a/lib/librte_vhost/vhost_user.c
> b/lib/librte_vhost/vhost_user.c
> > index 61ef699ac..7754d2467 100644
> > --- a/lib/librte_vhost/vhost_user.c
> > +++ b/lib/librte_vhost/vhost_user.c
> > @@ -641,11 +641,23 @@ translate_ring_addresses(struct virtio_net *dev,
> int vq_index)
> >  	struct vhost_vring_addr *addr = &vq->ring_addrs;
> >  	uint64_t len, expected_len;
> >
> > +	dev = numa_realloc(dev, vq_index);
> 
> We need to update `vq->desc` first before doing numa_realloc.
> https://github.com/DPDK/dpdk/blob/19397c7bf2545e6adab41b657a1f1da3c7344e7b/
> lib/librte_vhost/vhost_user.c#L445
> 
> > +	vq = dev->virtqueue[vq_index];
> > +	if (addr->flags & (1 << VHOST_VRING_F_LOG)) {
> 
> `vq` can be reallocated by numa_realloc.
> We need to update the `addr` pointer before using it.
> 

Hi Tiwei,
Numa_realloc function will copy data from original vq structure to new vq when reallocating.
The content of vhost_ring_addr will be the same in new and old vqs, it may not be necessary to update pointer.

Regards,
Marvin

> Thanks,
> Tiwei
> 
> 
> > +		vq->log_guest_addr =
> > +			translate_log_addr(dev, vq, addr->log_guest_addr);
> > +		if (vq->log_guest_addr == 0) {
> > +			RTE_LOG(DEBUG, VHOST_CONFIG,
> > +					"(%d) failed to map log_guest_addr.\n",
> > +					dev->vid);
> > +			return dev;
> > +		}
> > +	}
> > +
> >  	if (vq_is_packed(dev)) {
> >  		len = sizeof(struct vring_packed_desc) * vq->size;
> >  		vq->desc_packed = (struct vring_packed_desc *)(uintptr_t)
> >  			ring_addr_to_vva(dev, vq, addr->desc_user_addr, &len);
> > -		vq->log_guest_addr = 0;
> >  		if (vq->desc_packed == NULL ||
> >  				len != sizeof(struct vring_packed_desc) *
> >  				vq->size) {
> > @@ -655,10 +667,6 @@ translate_ring_addresses(struct virtio_net *dev, int
> vq_index)
> >  			return dev;
> >  		}
> >
> > -		dev = numa_realloc(dev, vq_index);
> > -		vq = dev->virtqueue[vq_index];
> > -		addr = &vq->ring_addrs;
> > -
> >  		len = sizeof(struct vring_packed_desc_event);
> >  		vq->driver_event = (struct vring_packed_desc_event *)
> >  					(uintptr_t)ring_addr_to_vva(dev,
> > @@ -701,10 +709,6 @@ translate_ring_addresses(struct virtio_net *dev, int
> vq_index)
> >  		return dev;
> >  	}
> >
> > -	dev = numa_realloc(dev, vq_index);
> > -	vq = dev->virtqueue[vq_index];
> > -	addr = &vq->ring_addrs;
> > -
> >  	len = sizeof(struct vring_avail) + sizeof(uint16_t) * vq->size;
> >  	if (dev->features & (1ULL << VIRTIO_RING_F_EVENT_IDX))
> >  		len += sizeof(uint16_t);
> > @@ -741,14 +745,6 @@ translate_ring_addresses(struct virtio_net *dev, int
> vq_index)
> >  		vq->last_avail_idx = vq->used->idx;
> >  	}
> >
> > -	vq->log_guest_addr =
> > -		translate_log_addr(dev, vq, addr->log_guest_addr);
> > -	if (vq->log_guest_addr == 0) {
> > -		RTE_LOG(DEBUG, VHOST_CONFIG,
> > -			"(%d) failed to map log_guest_addr .\n",
> > -			dev->vid);
> > -		return dev;
> > -	}
> >  	vq->access_ok = 1;
> >
> >  	VHOST_LOG_DEBUG(VHOST_CONFIG, "(%d) mapped address desc: %p\n",
> > --
> > 2.17.1
> >

Re: [dpdk-dev] [PATCH v3] vhost: fix vhost user virtqueue not accessible

[Adrian Moreno]

Hi Marvin,

On 10/31/19 3:54 PM, Liu, Yong wrote:
> 
> 
>> -----Original Message-----
>> From: Bie, Tiwei
>> Sent: Thursday, October 31, 2019 6:42 PM
>> To: Liu, Yong <yong.liu@intel.com>
>> Cc: maxime.coquelin@redhat.com; Wang, Zhihong <zhihong.wang@intel.com>;
>> amorenoz@redhat.com; dev@dpdk.org
>> Subject: Re: [PATCH v3] vhost: fix vhost user virtqueue not accessible
>>
>> On Wed, Oct 30, 2019 at 10:56:02PM +0800, Marvin Liu wrote:
>>> Log feature is disabled in vhost user, so that log address was invalid
>>> when checking. Check whether log address is valid can workaround it.
>>> Also log address should be translated in packed ring virtqueue.
>>>
>>> Fixes: 04cfc7fdbfca ("vhost: translate incoming log address to gpa")
>>>
>>> Signed-off-by: Marvin Liu <yong.liu@intel.com>
>>> ---
>>>  lib/librte_vhost/vhost_user.c | 30 +++++++++++++-----------------
>>>  1 file changed, 13 insertions(+), 17 deletions(-)
>>>
>>> diff --git a/lib/librte_vhost/vhost_user.c
>> b/lib/librte_vhost/vhost_user.c
>>> index 61ef699ac..7754d2467 100644
>>> --- a/lib/librte_vhost/vhost_user.c
>>> +++ b/lib/librte_vhost/vhost_user.c
>>> @@ -641,11 +641,23 @@ translate_ring_addresses(struct virtio_net *dev,
>> int vq_index)
>>>  	struct vhost_vring_addr *addr = &vq->ring_addrs;
>>>  	uint64_t len, expected_len;
>>>
>>> +	dev = numa_realloc(dev, vq_index);
>>
>> We need to update `vq->desc` first before doing numa_realloc.
>> https://github.com/DPDK/dpdk/blob/19397c7bf2545e6adab41b657a1f1da3c7344e7b/
>> lib/librte_vhost/vhost_user.c#L445
>>
>>> +	vq = dev->virtqueue[vq_index];
>>> +	if (addr->flags & (1 << VHOST_VRING_F_LOG)) {
>>
I fear the possible consequences of this change.
Before 04cfc7fdbfca the approach was "best-effort". The log address would be
assigned without further checks:

	vq->log_guest_addr = addr->log_guest_addr;

Then, the behavior changed and an error was generated if the log address was
invalid, which I guess is the problem you have hit:

	vq->log_guest_addr =
		translate_log_addr(dev, vq, addr->log_guest_addr);
	if (vq->log_guest_addr == 0) {
		RTE_LOG(DEBUG, VHOST_CONFIG,
			"(%d) failed to map log_guest_addr .\n",
			dev->vid);
		return dev;
	}

In the tests I ran I always saw valid log addresses being sent at ring
initialization phase, but if, as you claim, it's possible that invalid addresses
are given at initialization phase, maybe we should go back to "best-effort"
(i.e: remove the return statement)

But it's unlikely that qemu has enabled logging at ring initialization so this
would effectively disable the translation at the initialization phase. I cannot
forecast the consequences of this change without deeper analysis.

>> `vq` can be reallocated by numa_realloc.
>> We need to update the `addr` pointer before using it.
>>
> 
> Hi Tiwei,
> Numa_realloc function will copy data from original vq structure to new vq when reallocating.
> The content of vhost_ring_addr will be the same in new and old vqs, it may not be necessary to update pointer.
That's true but 'addr' still holds a pointer to the old structure, assigned at
line 641.

Also, note Tiwei's comment regarding updating 'vq->desc'. The idea behind
numa_realloc is to reallocate the vhost_virtqueue structure to the same numa
node as the descriptor ring. This function is updating the descriptor rings, so
I think the idea is to update the ring addresses and then reallocate the
virtqueue structure if needed.

Thanks,
Adrian

> Regards,
> Marvin
> 
>> Thanks,
>> Tiwei
>>
>>
>>> +		vq->log_guest_addr =
>>> +			translate_log_addr(dev, vq, addr->log_guest_addr);
>>> +		if (vq->log_guest_addr == 0) {
>>> +			RTE_LOG(DEBUG, VHOST_CONFIG,
>>> +					"(%d) failed to map log_guest_addr.\n",
>>> +					dev->vid);
>>> +			return dev;
>>> +		}
>>> +	}
>>> +
>>>  	if (vq_is_packed(dev)) {
>>>  		len = sizeof(struct vring_packed_desc) * vq->size;
>>>  		vq->desc_packed = (struct vring_packed_desc *)(uintptr_t)
>>>  			ring_addr_to_vva(dev, vq, addr->desc_user_addr, &len);
>>> -		vq->log_guest_addr = 0;
>>>  		if (vq->desc_packed == NULL ||
>>>  				len != sizeof(struct vring_packed_desc) *
>>>  				vq->size) {
>>> @@ -655,10 +667,6 @@ translate_ring_addresses(struct virtio_net *dev, int
>> vq_index)
>>>  			return dev;
>>>  		}
>>>
>>> -		dev = numa_realloc(dev, vq_index);
>>> -		vq = dev->virtqueue[vq_index];
>>> -		addr = &vq->ring_addrs;
>>> -
>>>  		len = sizeof(struct vring_packed_desc_event);
>>>  		vq->driver_event = (struct vring_packed_desc_event *)
>>>  					(uintptr_t)ring_addr_to_vva(dev,
>>> @@ -701,10 +709,6 @@ translate_ring_addresses(struct virtio_net *dev, int
>> vq_index)
>>>  		return dev;
>>>  	}
>>>
>>> -	dev = numa_realloc(dev, vq_index);
>>> -	vq = dev->virtqueue[vq_index];
>>> -	addr = &vq->ring_addrs;
>>> -
>>>  	len = sizeof(struct vring_avail) + sizeof(uint16_t) * vq->size;
>>>  	if (dev->features & (1ULL << VIRTIO_RING_F_EVENT_IDX))
>>>  		len += sizeof(uint16_t);
>>> @@ -741,14 +745,6 @@ translate_ring_addresses(struct virtio_net *dev, int
>> vq_index)
>>>  		vq->last_avail_idx = vq->used->idx;
>>>  	}
>>>
>>> -	vq->log_guest_addr =
>>> -		translate_log_addr(dev, vq, addr->log_guest_addr);
>>> -	if (vq->log_guest_addr == 0) {
>>> -		RTE_LOG(DEBUG, VHOST_CONFIG,
>>> -			"(%d) failed to map log_guest_addr .\n",
>>> -			dev->vid);
>>> -		return dev;
>>> -	}
>>>  	vq->access_ok = 1;
>>>
>>>  	VHOST_LOG_DEBUG(VHOST_CONFIG, "(%d) mapped address desc: %p\n",
>>> --
>>> 2.17.1
>>>

Re: [dpdk-dev] [PATCH v3] vhost: fix vhost user virtqueue not accessible

[Liu, Yong]

> -----Original Message-----
> From: Adrian Moreno [mailto:amorenoz@redhat.com]
> Sent: Friday, November 01, 2019 1:48 AM
> To: Liu, Yong <yong.liu@intel.com>; Bie, Tiwei <tiwei.bie@intel.com>
> Cc: maxime.coquelin@redhat.com; Wang, Zhihong <zhihong.wang@intel.com>;
> dev@dpdk.org
> Subject: Re: [PATCH v3] vhost: fix vhost user virtqueue not accessible
> 
> Hi Marvin,
> 
> On 10/31/19 3:54 PM, Liu, Yong wrote:
> >
> >
> >> -----Original Message-----
> >> From: Bie, Tiwei
> >> Sent: Thursday, October 31, 2019 6:42 PM
> >> To: Liu, Yong <yong.liu@intel.com>
> >> Cc: maxime.coquelin@redhat.com; Wang, Zhihong <zhihong.wang@intel.com>;
> >> amorenoz@redhat.com; dev@dpdk.org
> >> Subject: Re: [PATCH v3] vhost: fix vhost user virtqueue not accessible
> >>
> >> On Wed, Oct 30, 2019 at 10:56:02PM +0800, Marvin Liu wrote:
> >>> Log feature is disabled in vhost user, so that log address was invalid
> >>> when checking. Check whether log address is valid can workaround it.
> >>> Also log address should be translated in packed ring virtqueue.
> >>>
> >>> Fixes: 04cfc7fdbfca ("vhost: translate incoming log address to gpa")
> >>>
> >>> Signed-off-by: Marvin Liu <yong.liu@intel.com>
> >>> ---
> >>>  lib/librte_vhost/vhost_user.c | 30 +++++++++++++-----------------
> >>>  1 file changed, 13 insertions(+), 17 deletions(-)
> >>>
> >>> diff --git a/lib/librte_vhost/vhost_user.c
> >> b/lib/librte_vhost/vhost_user.c
> >>> index 61ef699ac..7754d2467 100644
> >>> --- a/lib/librte_vhost/vhost_user.c
> >>> +++ b/lib/librte_vhost/vhost_user.c
> >>> @@ -641,11 +641,23 @@ translate_ring_addresses(struct virtio_net *dev,
> >> int vq_index)
> >>>  	struct vhost_vring_addr *addr = &vq->ring_addrs;
> >>>  	uint64_t len, expected_len;
> >>>
> >>> +	dev = numa_realloc(dev, vq_index);
> >>
> >> We need to update `vq->desc` first before doing numa_realloc.
> >>
> https://github.com/DPDK/dpdk/blob/19397c7bf2545e6adab41b657a1f1da3c7344e7b/
> >> lib/librte_vhost/vhost_user.c#L445
> >>
> >>> +	vq = dev->virtqueue[vq_index];
> >>> +	if (addr->flags & (1 << VHOST_VRING_F_LOG)) {
> >>
> I fear the possible consequences of this change.
> Before 04cfc7fdbfca the approach was "best-effort". The log address would
> be
> assigned without further checks:
> 
> 	vq->log_guest_addr = addr->log_guest_addr;
> 
> Then, the behavior changed and an error was generated if the log address
> was
> invalid, which I guess is the problem you have hit:
> 
> 	vq->log_guest_addr =
> 		translate_log_addr(dev, vq, addr->log_guest_addr);
> 	if (vq->log_guest_addr == 0) {
> 		RTE_LOG(DEBUG, VHOST_CONFIG,
> 			"(%d) failed to map log_guest_addr .\n",
> 			dev->vid);
> 		return dev;
> 	}
> 
> In the tests I ran I always saw valid log addresses being sent at ring
> initialization phase, but if, as you claim, it's possible that invalid
> addresses
> are given at initialization phase, maybe we should go back to "best-effort"
> (i.e: remove the return statement)
> 
> But it's unlikely that qemu has enabled logging at ring initialization so
> this
> would effectively disable the translation at the initialization phase. I
> cannot
> forecast the consequences of this change without deeper analysis.

That's fine, Adrian. This issue only occurred when using dpdk virtio user device.
Since address logging is disabled in virtio user, simple flag check fix it.

> 
> >> `vq` can be reallocated by numa_realloc.
> >> We need to update the `addr` pointer before using it.
> >>
> >
> > Hi Tiwei,
> > Numa_realloc function will copy data from original vq structure to new vq
> when reallocating.
> > The content of vhost_ring_addr will be the same in new and old vqs, it
> may not be necessary to update pointer.
> That's true but 'addr' still holds a pointer to the old structure, assigned
> at
> line 641.
> 
> Also, note Tiwei's comment regarding updating 'vq->desc'. The idea behind
> numa_realloc is to reallocate the vhost_virtqueue structure to the same
> numa
> node as the descriptor ring. This function is updating the descriptor rings,
> so
> I think the idea is to update the ring addresses and then reallocate the
> virtqueue structure if needed.
> 
You are right, I misunderstood tiwei's comment. The ring address is useful for 
checking numa id, numa reallocation should be after address translation.

Regards,
Marvin

> Thanks,
> Adrian
> 
> > Regards,
> > Marvin
> >
> >> Thanks,
> >> Tiwei
> >>
> >>
> >>> +		vq->log_guest_addr =
> >>> +			translate_log_addr(dev, vq, addr->log_guest_addr);
> >>> +		if (vq->log_guest_addr == 0) {
> >>> +			RTE_LOG(DEBUG, VHOST_CONFIG,
> >>> +					"(%d) failed to map log_guest_addr.\n",
> >>> +					dev->vid);
> >>> +			return dev;
> >>> +		}
> >>> +	}
> >>> +
> >>>  	if (vq_is_packed(dev)) {
> >>>  		len = sizeof(struct vring_packed_desc) * vq->size;
> >>>  		vq->desc_packed = (struct vring_packed_desc *)(uintptr_t)
> >>>  			ring_addr_to_vva(dev, vq, addr->desc_user_addr, &len);
> >>> -		vq->log_guest_addr = 0;
> >>>  		if (vq->desc_packed == NULL ||
> >>>  				len != sizeof(struct vring_packed_desc) *
> >>>  				vq->size) {
> >>> @@ -655,10 +667,6 @@ translate_ring_addresses(struct virtio_net *dev,
> int
> >> vq_index)
> >>>  			return dev;
> >>>  		}
> >>>
> >>> -		dev = numa_realloc(dev, vq_index);
> >>> -		vq = dev->virtqueue[vq_index];
> >>> -		addr = &vq->ring_addrs;
> >>> -
> >>>  		len = sizeof(struct vring_packed_desc_event);
> >>>  		vq->driver_event = (struct vring_packed_desc_event *)
> >>>  					(uintptr_t)ring_addr_to_vva(dev,
> >>> @@ -701,10 +709,6 @@ translate_ring_addresses(struct virtio_net *dev,
> int
> >> vq_index)
> >>>  		return dev;
> >>>  	}
> >>>
> >>> -	dev = numa_realloc(dev, vq_index);
> >>> -	vq = dev->virtqueue[vq_index];
> >>> -	addr = &vq->ring_addrs;
> >>> -
> >>>  	len = sizeof(struct vring_avail) + sizeof(uint16_t) * vq->size;
> >>>  	if (dev->features & (1ULL << VIRTIO_RING_F_EVENT_IDX))
> >>>  		len += sizeof(uint16_t);
> >>> @@ -741,14 +745,6 @@ translate_ring_addresses(struct virtio_net *dev,
> int
> >> vq_index)
> >>>  		vq->last_avail_idx = vq->used->idx;
> >>>  	}
> >>>
> >>> -	vq->log_guest_addr =
> >>> -		translate_log_addr(dev, vq, addr->log_guest_addr);
> >>> -	if (vq->log_guest_addr == 0) {
> >>> -		RTE_LOG(DEBUG, VHOST_CONFIG,
> >>> -			"(%d) failed to map log_guest_addr .\n",
> >>> -			dev->vid);
> >>> -		return dev;
> >>> -	}
> >>>  	vq->access_ok = 1;
> >>>
> >>>  	VHOST_LOG_DEBUG(VHOST_CONFIG, "(%d) mapped address desc: %p\n",
> >>> --
> >>> 2.17.1
> >>>

Re: [dpdk-dev] [PATCH v3] vhost: fix vhost user virtqueue not accessible

[Adrian Moreno]

On 11/1/19 8:16 AM, Liu, Yong wrote:
> 
> 
>> -----Original Message-----
>> From: Adrian Moreno [mailto:amorenoz@redhat.com]
>> Sent: Friday, November 01, 2019 1:48 AM
>> To: Liu, Yong <yong.liu@intel.com>; Bie, Tiwei <tiwei.bie@intel.com>
>> Cc: maxime.coquelin@redhat.com; Wang, Zhihong <zhihong.wang@intel.com>;
>> dev@dpdk.org
>> Subject: Re: [PATCH v3] vhost: fix vhost user virtqueue not accessible
>>
>> Hi Marvin,
>>
>> On 10/31/19 3:54 PM, Liu, Yong wrote:
>>>
>>>
>>>> -----Original Message-----
>>>> From: Bie, Tiwei
>>>> Sent: Thursday, October 31, 2019 6:42 PM
>>>> To: Liu, Yong <yong.liu@intel.com>
>>>> Cc: maxime.coquelin@redhat.com; Wang, Zhihong <zhihong.wang@intel.com>;
>>>> amorenoz@redhat.com; dev@dpdk.org
>>>> Subject: Re: [PATCH v3] vhost: fix vhost user virtqueue not accessible
>>>>
>>>> On Wed, Oct 30, 2019 at 10:56:02PM +0800, Marvin Liu wrote:
>>>>> Log feature is disabled in vhost user, so that log address was invalid
>>>>> when checking. Check whether log address is valid can workaround it.
>>>>> Also log address should be translated in packed ring virtqueue.
>>>>>
>>>>> Fixes: 04cfc7fdbfca ("vhost: translate incoming log address to gpa")
>>>>>
>>>>> Signed-off-by: Marvin Liu <yong.liu@intel.com>
>>>>> ---
>>>>>  lib/librte_vhost/vhost_user.c | 30 +++++++++++++-----------------
>>>>>  1 file changed, 13 insertions(+), 17 deletions(-)
>>>>>
>>>>> diff --git a/lib/librte_vhost/vhost_user.c
>>>> b/lib/librte_vhost/vhost_user.c
>>>>> index 61ef699ac..7754d2467 100644
>>>>> --- a/lib/librte_vhost/vhost_user.c
>>>>> +++ b/lib/librte_vhost/vhost_user.c
>>>>> @@ -641,11 +641,23 @@ translate_ring_addresses(struct virtio_net *dev,
>>>> int vq_index)
>>>>>  	struct vhost_vring_addr *addr = &vq->ring_addrs;
>>>>>  	uint64_t len, expected_len;
>>>>>
>>>>> +	dev = numa_realloc(dev, vq_index);
>>>>
>>>> We need to update `vq->desc` first before doing numa_realloc.
>>>>
>> https://github.com/DPDK/dpdk/blob/19397c7bf2545e6adab41b657a1f1da3c7344e7b/
>>>> lib/librte_vhost/vhost_user.c#L445
>>>>
>>>>> +	vq = dev->virtqueue[vq_index];
>>>>> +	if (addr->flags & (1 << VHOST_VRING_F_LOG)) {
>>>>
>> I fear the possible consequences of this change.
>> Before 04cfc7fdbfca the approach was "best-effort". The log address would
>> be
>> assigned without further checks:
>>
>> 	vq->log_guest_addr = addr->log_guest_addr;
>>
>> Then, the behavior changed and an error was generated if the log address
>> was
>> invalid, which I guess is the problem you have hit:
>>
>> 	vq->log_guest_addr =
>> 		translate_log_addr(dev, vq, addr->log_guest_addr);
>> 	if (vq->log_guest_addr == 0) {
>> 		RTE_LOG(DEBUG, VHOST_CONFIG,
>> 			"(%d) failed to map log_guest_addr .\n",
>> 			dev->vid);
>> 		return dev;
>> 	}
>>
>> In the tests I ran I always saw valid log addresses being sent at ring
>> initialization phase, but if, as you claim, it's possible that invalid
>> addresses
>> are given at initialization phase, maybe we should go back to "best-effort"
>> (i.e: remove the return statement)
>>
>> But it's unlikely that qemu has enabled logging at ring initialization so
>> this
>> would effectively disable the translation at the initialization phase. I
>> cannot
>> forecast the consequences of this change without deeper analysis.
> 
> That's fine, Adrian. This issue only occurred when using dpdk virtio user device.
> Since address logging is disabled in virtio user, simple flag check fix it.
> 
What I meant is that we would be changing the behavior for the vhost-user case
in which qemu sends a valid log address even when logging is still not enabled.
In that case we would be effectively postponing the translation.

In any case, I've run a quick test and that case still works fine.

Thanks,
Adrian
>>
>>>> `vq` can be reallocated by numa_realloc.
>>>> We need to update the `addr` pointer before using it.
>>>>
>>>
>>> Hi Tiwei,
>>> Numa_realloc function will copy data from original vq structure to new vq
>> when reallocating.
>>> The content of vhost_ring_addr will be the same in new and old vqs, it
>> may not be necessary to update pointer.
>> That's true but 'addr' still holds a pointer to the old structure, assigned
>> at
>> line 641.
>>
>> Also, note Tiwei's comment regarding updating 'vq->desc'. The idea behind
>> numa_realloc is to reallocate the vhost_virtqueue structure to the same
>> numa
>> node as the descriptor ring. This function is updating the descriptor rings,
>> so
>> I think the idea is to update the ring addresses and then reallocate the
>> virtqueue structure if needed.
>>
> You are right, I misunderstood tiwei's comment. The ring address is useful for 
> checking numa id, numa reallocation should be after address translation.
> 
> Regards,
> Marvin
> 
>> Thanks,
>> Adrian
>>
>>> Regards,
>>> Marvin
>>>
>>>> Thanks,
>>>> Tiwei
>>>>
>>>>
>>>>> +		vq->log_guest_addr =
>>>>> +			translate_log_addr(dev, vq, addr->log_guest_addr);
>>>>> +		if (vq->log_guest_addr == 0) {
>>>>> +			RTE_LOG(DEBUG, VHOST_CONFIG,
>>>>> +					"(%d) failed to map log_guest_addr.\n",
>>>>> +					dev->vid);
>>>>> +			return dev;
>>>>> +		}
>>>>> +	}
>>>>> +
>>>>>  	if (vq_is_packed(dev)) {
>>>>>  		len = sizeof(struct vring_packed_desc) * vq->size;
>>>>>  		vq->desc_packed = (struct vring_packed_desc *)(uintptr_t)
>>>>>  			ring_addr_to_vva(dev, vq, addr->desc_user_addr, &len);
>>>>> -		vq->log_guest_addr = 0;
>>>>>  		if (vq->desc_packed == NULL ||
>>>>>  				len != sizeof(struct vring_packed_desc) *
>>>>>  				vq->size) {
>>>>> @@ -655,10 +667,6 @@ translate_ring_addresses(struct virtio_net *dev,
>> int
>>>> vq_index)
>>>>>  			return dev;
>>>>>  		}
>>>>>
>>>>> -		dev = numa_realloc(dev, vq_index);
>>>>> -		vq = dev->virtqueue[vq_index];
>>>>> -		addr = &vq->ring_addrs;
>>>>> -
>>>>>  		len = sizeof(struct vring_packed_desc_event);
>>>>>  		vq->driver_event = (struct vring_packed_desc_event *)
>>>>>  					(uintptr_t)ring_addr_to_vva(dev,
>>>>> @@ -701,10 +709,6 @@ translate_ring_addresses(struct virtio_net *dev,
>> int
>>>> vq_index)
>>>>>  		return dev;
>>>>>  	}
>>>>>
>>>>> -	dev = numa_realloc(dev, vq_index);
>>>>> -	vq = dev->virtqueue[vq_index];
>>>>> -	addr = &vq->ring_addrs;
>>>>> -
>>>>>  	len = sizeof(struct vring_avail) + sizeof(uint16_t) * vq->size;
>>>>>  	if (dev->features & (1ULL << VIRTIO_RING_F_EVENT_IDX))
>>>>>  		len += sizeof(uint16_t);
>>>>> @@ -741,14 +745,6 @@ translate_ring_addresses(struct virtio_net *dev,
>> int
>>>> vq_index)
>>>>>  		vq->last_avail_idx = vq->used->idx;
>>>>>  	}
>>>>>
>>>>> -	vq->log_guest_addr =
>>>>> -		translate_log_addr(dev, vq, addr->log_guest_addr);
>>>>> -	if (vq->log_guest_addr == 0) {
>>>>> -		RTE_LOG(DEBUG, VHOST_CONFIG,
>>>>> -			"(%d) failed to map log_guest_addr .\n",
>>>>> -			dev->vid);
>>>>> -		return dev;
>>>>> -	}
>>>>>  	vq->access_ok = 1;
>>>>>
>>>>>  	VHOST_LOG_DEBUG(VHOST_CONFIG, "(%d) mapped address desc: %p\n",
>>>>> --
>>>>> 2.17.1
>>>>>
> 

[dpdk-dev] [PATCH v4] vhost: fix vhost user virtqueue not accessible

[Marvin Liu]

Log feature is disabled in vhost user, so that log address was invalid
when checking. Check whether log address is valid can work around it.
Log address should also be translated in packed ring virtqueue.

Fixes: 04cfc7fdbfca ("vhost: translate incoming log address to gpa")

Signed-off-by: Marvin Liu <yong.liu@intel.com>
---
 lib/librte_vhost/vhost_user.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/lib/librte_vhost/vhost_user.c b/lib/librte_vhost/vhost_user.c
index 61ef699ac..09e241305 100644
--- a/lib/librte_vhost/vhost_user.c
+++ b/lib/librte_vhost/vhost_user.c
@@ -641,11 +641,21 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
 	struct vhost_vring_addr *addr = &vq->ring_addrs;
 	uint64_t len, expected_len;
 
+	if (addr->flags & (1 << VHOST_VRING_F_LOG)) {
+		vq->log_guest_addr =
+			translate_log_addr(dev, vq, addr->log_guest_addr);
+		if (vq->log_guest_addr == 0) {
+			RTE_LOG(DEBUG, VHOST_CONFIG,
+				"(%d) failed to map log_guest_addr.\n",
+				dev->vid);
+			return dev;
+		}
+	}
+
 	if (vq_is_packed(dev)) {
 		len = sizeof(struct vring_packed_desc) * vq->size;
 		vq->desc_packed = (struct vring_packed_desc *)(uintptr_t)
 			ring_addr_to_vva(dev, vq, addr->desc_user_addr, &len);
-		vq->log_guest_addr = 0;
 		if (vq->desc_packed == NULL ||
 				len != sizeof(struct vring_packed_desc) *
 				vq->size) {
@@ -741,14 +751,6 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
 		vq->last_avail_idx = vq->used->idx;
 	}
 
-	vq->log_guest_addr =
-		translate_log_addr(dev, vq, addr->log_guest_addr);
-	if (vq->log_guest_addr == 0) {
-		RTE_LOG(DEBUG, VHOST_CONFIG,
-			"(%d) failed to map log_guest_addr .\n",
-			dev->vid);
-		return dev;
-	}
 	vq->access_ok = 1;
 
 	VHOST_LOG_DEBUG(VHOST_CONFIG, "(%d) mapped address desc: %p\n",
-- 
2.17.1

Re: [dpdk-dev] [PATCH v4] vhost: fix vhost user virtqueue not accessible

[Adrian Moreno]

On 11/4/19 11:13 AM, Marvin Liu wrote:
> Log feature is disabled in vhost user, so that log address was invalid
> when checking. Check whether log address is valid can work around it.
> Log address should also be translated in packed ring virtqueue.
> 
> Fixes: 04cfc7fdbfca ("vhost: translate incoming log address to gpa")
> 
> Signed-off-by: Marvin Liu <yong.liu@intel.com>
> ---
>  lib/librte_vhost/vhost_user.c | 20 +++++++++++---------
>  1 file changed, 11 insertions(+), 9 deletions(-)
> 
> diff --git a/lib/librte_vhost/vhost_user.c b/lib/librte_vhost/vhost_user.c
> index 61ef699ac..09e241305 100644
> --- a/lib/librte_vhost/vhost_user.c
> +++ b/lib/librte_vhost/vhost_user.c
> @@ -641,11 +641,21 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
>  	struct vhost_vring_addr *addr = &vq->ring_addrs;
>  	uint64_t len, expected_len;
>  
> +	if (addr->flags & (1 << VHOST_VRING_F_LOG)) {
> +		vq->log_guest_addr =
> +			translate_log_addr(dev, vq, addr->log_guest_addr);
> +		if (vq->log_guest_addr == 0) {
> +			RTE_LOG(DEBUG, VHOST_CONFIG,
> +				"(%d) failed to map log_guest_addr.\n",
> +				dev->vid);
> +			return dev;
> +		}
> +	}
> +
>  	if (vq_is_packed(dev)) {
>  		len = sizeof(struct vring_packed_desc) * vq->size;
>  		vq->desc_packed = (struct vring_packed_desc *)(uintptr_t)
>  			ring_addr_to_vva(dev, vq, addr->desc_user_addr, &len);
> -		vq->log_guest_addr = 0;
>  		if (vq->desc_packed == NULL ||
>  				len != sizeof(struct vring_packed_desc) *
>  				vq->size) {
> @@ -741,14 +751,6 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
>  		vq->last_avail_idx = vq->used->idx;
>  	}
>  
> -	vq->log_guest_addr =
> -		translate_log_addr(dev, vq, addr->log_guest_addr);
> -	if (vq->log_guest_addr == 0) {
> -		RTE_LOG(DEBUG, VHOST_CONFIG,
> -			"(%d) failed to map log_guest_addr .\n",
> -			dev->vid);
> -		return dev;
> -	}
>  	vq->access_ok = 1;
>  
>  	VHOST_LOG_DEBUG(VHOST_CONFIG, "(%d) mapped address desc: %p\n",
> 

Reviewed-by: Adrian Moreno <amorenoz@redhat.com>

Re: [dpdk-dev] [PATCH v4] vhost: fix vhost user virtqueue not accessible

[Maxime Coquelin]

On 11/4/19 9:47 AM, Adrian Moreno wrote:
> On 11/4/19 11:13 AM, Marvin Liu wrote:
>> Log feature is disabled in vhost user, so that log address was invalid
>> when checking. Check whether log address is valid can work around it.
>> Log address should also be translated in packed ring virtqueue.
>>
>> Fixes: 04cfc7fdbfca ("vhost: translate incoming log address to gpa")
>>
>> Signed-off-by: Marvin Liu <yong.liu@intel.com>
>> ---
>>  lib/librte_vhost/vhost_user.c | 20 +++++++++++---------
>>  1 file changed, 11 insertions(+), 9 deletions(-)
>>
>> diff --git a/lib/librte_vhost/vhost_user.c b/lib/librte_vhost/vhost_user.c
>> index 61ef699ac..09e241305 100644
>> --- a/lib/librte_vhost/vhost_user.c
>> +++ b/lib/librte_vhost/vhost_user.c
>> @@ -641,11 +641,21 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
>>  	struct vhost_vring_addr *addr = &vq->ring_addrs;
>>  	uint64_t len, expected_len;
>>  
>> +	if (addr->flags & (1 << VHOST_VRING_F_LOG)) {
>> +		vq->log_guest_addr =
>> +			translate_log_addr(dev, vq, addr->log_guest_addr);
>> +		if (vq->log_guest_addr == 0) {
>> +			RTE_LOG(DEBUG, VHOST_CONFIG,
>> +				"(%d) failed to map log_guest_addr.\n",
>> +				dev->vid);
>> +			return dev;
>> +		}
>> +	}
>> +
>>  	if (vq_is_packed(dev)) {
>>  		len = sizeof(struct vring_packed_desc) * vq->size;
>>  		vq->desc_packed = (struct vring_packed_desc *)(uintptr_t)
>>  			ring_addr_to_vva(dev, vq, addr->desc_user_addr, &len);
>> -		vq->log_guest_addr = 0;
>>  		if (vq->desc_packed == NULL ||
>>  				len != sizeof(struct vring_packed_desc) *
>>  				vq->size) {
>> @@ -741,14 +751,6 @@ translate_ring_addresses(struct virtio_net *dev, int vq_index)
>>  		vq->last_avail_idx = vq->used->idx;
>>  	}
>>  
>> -	vq->log_guest_addr =
>> -		translate_log_addr(dev, vq, addr->log_guest_addr);
>> -	if (vq->log_guest_addr == 0) {
>> -		RTE_LOG(DEBUG, VHOST_CONFIG,
>> -			"(%d) failed to map log_guest_addr .\n",
>> -			dev->vid);
>> -		return dev;
>> -	}
>>  	vq->access_ok = 1;
>>  
>>  	VHOST_LOG_DEBUG(VHOST_CONFIG, "(%d) mapped address desc: %p\n",
>>
> 
> Reviewed-by: Adrian Moreno <amorenoz@redhat.com>
> 

Thanks Marvin for the fix, and Adrian for the review.

It looks good to me too now:
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

Maxime

Re: [dpdk-dev] [PATCH v4] vhost: fix vhost user virtqueue not accessible

[Maxime Coquelin]

On 11/4/19 11:13 AM, Marvin Liu wrote:
> Log feature is disabled in vhost user, so that log address was invalid
> when checking. Check whether log address is valid can work around it.
> Log address should also be translated in packed ring virtqueue.
> 
> Fixes: 04cfc7fdbfca ("vhost: translate incoming log address to gpa")
> 
> Signed-off-by: Marvin Liu <yong.liu@intel.com>
> ---
>  lib/librte_vhost/vhost_user.c | 20 +++++++++++---------
>  1 file changed, 11 insertions(+), 9 deletions(-)

Applied to dpdk-next-virtio/master.

Thanks,
Maxime