DPDK patches and discussions
 help / color / mirror / Atom feed
From: Hemant Agrawal <hemant.agrawal@nxp.com>
To: dev@dpdk.org, akhil.goyal@nxp.com
Subject: [dpdk-dev] [PATCH v2 04/13] crypto/dpaa2_sec: adding NULL cipher or NULL auth
Date: Fri,  1 Nov 2019 23:21:32 +0530	[thread overview]
Message-ID: <20191101175141.4663-4-hemant.agrawal@nxp.com> (raw)
In-Reply-To: <20191101175141.4663-1-hemant.agrawal@nxp.com>

These are supported when using protocol offload mode or in chain mode.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
---
 drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 22 +++++++----
 drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h   | 41 +++++++++++++++++++++
 2 files changed, 56 insertions(+), 7 deletions(-)

diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
index 70207818b..6c2faa69a 100644
--- a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: BSD-3-Clause
  *
  *   Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
- *   Copyright 2016-2018 NXP
+ *   Copyright 2016-2019 NXP
  *
  */
 
@@ -1837,6 +1837,7 @@ dpaa2_sec_cipher_init(struct rte_cryptodev *dev,
 
 	flc = &priv->flc_desc[0].flc;
 
+	session->ctxt_type = DPAA2_SEC_CIPHER;
 	session->cipher_key.data = rte_zmalloc(NULL, xform->cipher.key.length,
 			RTE_CACHE_LINE_SIZE);
 	if (session->cipher_key.data == NULL) {
@@ -1973,6 +1974,7 @@ dpaa2_sec_auth_init(struct rte_cryptodev *dev,
 	priv->fle_pool = dev_priv->fle_pool;
 	flc = &priv->flc_desc[DESC_INITFINAL].flc;
 
+	session->ctxt_type = DPAA2_SEC_AUTH;
 	session->auth_key.data = rte_zmalloc(NULL, xform->auth.key.length,
 			RTE_CACHE_LINE_SIZE);
 	if (session->auth_key.data == NULL) {
@@ -2481,27 +2483,33 @@ dpaa2_sec_set_session_parameters(struct rte_cryptodev *dev,
 
 	/* Cipher Only */
 	if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER && xform->next == NULL) {
-		session->ctxt_type = DPAA2_SEC_CIPHER;
 		ret = dpaa2_sec_cipher_init(dev, xform, session);
 
 	/* Authentication Only */
 	} else if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH &&
 		   xform->next == NULL) {
-		session->ctxt_type = DPAA2_SEC_AUTH;
 		ret = dpaa2_sec_auth_init(dev, xform, session);
 
 	/* Cipher then Authenticate */
 	} else if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER &&
 		   xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH) {
 		session->ext_params.aead_ctxt.auth_cipher_text = true;
-		ret = dpaa2_sec_aead_chain_init(dev, xform, session);
-
+		if (xform->cipher.algo == RTE_CRYPTO_CIPHER_NULL)
+			ret = dpaa2_sec_auth_init(dev, xform, session);
+		else if (xform->next->auth.algo == RTE_CRYPTO_AUTH_NULL)
+			ret = dpaa2_sec_cipher_init(dev, xform, session);
+		else
+			ret = dpaa2_sec_aead_chain_init(dev, xform, session);
 	/* Authenticate then Cipher */
 	} else if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH &&
 		   xform->next->type == RTE_CRYPTO_SYM_XFORM_CIPHER) {
 		session->ext_params.aead_ctxt.auth_cipher_text = false;
-		ret = dpaa2_sec_aead_chain_init(dev, xform, session);
-
+		if (xform->auth.algo == RTE_CRYPTO_AUTH_NULL)
+			ret = dpaa2_sec_cipher_init(dev, xform, session);
+		else if (xform->next->cipher.algo == RTE_CRYPTO_CIPHER_NULL)
+			ret = dpaa2_sec_auth_init(dev, xform, session);
+		else
+			ret = dpaa2_sec_aead_chain_init(dev, xform, session);
 	/* AEAD operation for AES-GCM kind of Algorithms */
 	} else if (xform->type == RTE_CRYPTO_SYM_XFORM_AEAD &&
 		   xform->next == NULL) {
diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
index b97dacbcb..528b64ef8 100644
--- a/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
@@ -200,6 +200,27 @@ typedef struct dpaa2_sec_session_entry {
 } dpaa2_sec_session;
 
 static const struct rte_cryptodev_capabilities dpaa2_sec_capabilities[] = {
+	{	/* NULL (AUTH) */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+			{.auth = {
+				.algo = RTE_CRYPTO_AUTH_NULL,
+				.block_size = 1,
+				.key_size = {
+					.min = 0,
+					.max = 0,
+					.increment = 0
+				},
+				.digest_size = {
+					.min = 0,
+					.max = 0,
+					.increment = 0
+				},
+				.iv_size = { 0 }
+			}, },
+		}, },
+	},
 	{	/* MD5 HMAC */
 		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
 		{.sym = {
@@ -356,6 +377,26 @@ static const struct rte_cryptodev_capabilities dpaa2_sec_capabilities[] = {
 			}, }
 		}, }
 	},
+	{	/* NULL (CIPHER) */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+			{.cipher = {
+				.algo = RTE_CRYPTO_CIPHER_NULL,
+				.block_size = 1,
+				.key_size = {
+					.min = 0,
+					.max = 0,
+					.increment = 0
+				},
+				.iv_size = {
+					.min = 0,
+					.max = 0,
+					.increment = 0
+				}
+			}, },
+		}, }
+	},
 	{	/* AES CBC */
 		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
 		{.sym = {
-- 
2.17.1


  parent reply	other threads:[~2019-11-01 17:55 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-25  8:33 [dpdk-dev] [PATCH 1/8] crypto/dpaa_sec: fix to set PDCP capability flags Hemant Agrawal
2019-10-25  8:33 ` [dpdk-dev] [PATCH 2/8] crypto/dpaa2_sec: add check for the session validity Hemant Agrawal
2019-10-25  8:33 ` [dpdk-dev] [PATCH 3/8] crypto/dpaa_sec: " Hemant Agrawal
2019-10-25  8:33 ` [dpdk-dev] [PATCH 4/8] crypto/dpaa2_sec: adding NULL cipher or NULL auth Hemant Agrawal
2019-10-25  8:33 ` [dpdk-dev] [PATCH 5/8] crypto/dpaa_sec: " Hemant Agrawal
2019-10-25  8:33 ` [dpdk-dev] [PATCH 6/8] crypto/dpaa2_sec: add AES-GCM support for lookaside case Hemant Agrawal
2019-10-25  8:33 ` [dpdk-dev] [PATCH 7/8] crypto/dpaa_sec: " Hemant Agrawal
2019-10-25  8:33 ` [dpdk-dev] [PATCH 8/8] test/cryptodev: enable additional cases for dpaax Hemant Agrawal
2019-11-01 17:51 ` [dpdk-dev] [PATCH v2 01/13] crypto/dpaa_sec: fix to set PDCP capability flags Hemant Agrawal
2019-11-01 17:51   ` [dpdk-dev] [PATCH v2 02/13] crypto/dpaa2_sec: add check for the session validity Hemant Agrawal
2019-11-01 17:51   ` [dpdk-dev] [PATCH v2 03/13] crypto/dpaa_sec: " Hemant Agrawal
2019-11-01 17:51   ` Hemant Agrawal [this message]
2019-11-01 17:51   ` [dpdk-dev] [PATCH v2 05/13] crypto/dpaa_sec: adding NULL cipher or NULL auth Hemant Agrawal
2019-11-01 17:51   ` [dpdk-dev] [PATCH v2 06/13] crypto/dpaa2_sec: add AES-GCM support for lookaside case Hemant Agrawal
2019-11-01 17:51   ` [dpdk-dev] [PATCH v2 07/13] crypto/dpaa_sec: " Hemant Agrawal
2019-11-01 17:51   ` [dpdk-dev] [PATCH v2 08/13] test/cryptodev: enable additional cases for dpaax Hemant Agrawal
2019-11-01 17:51   ` [dpdk-dev] [PATCH v2 09/13] crypto/dpaa2_sec: enable warning with truncated sha256 Hemant Agrawal
2019-11-01 17:51   ` [dpdk-dev] [PATCH v2 10/13] crypto/dpaa2_sec: remove unwanted context type check Hemant Agrawal
2019-11-01 17:51   ` [dpdk-dev] [PATCH v2 11/13] crypto/dpaa_sec: use macros in queue attach and detach Hemant Agrawal
2019-11-01 17:51   ` [dpdk-dev] [PATCH v2 12/13] crypto/dpaa2_sec: use aes-ctr initial counter as 1 Hemant Agrawal
2019-11-01 17:51   ` [dpdk-dev] [PATCH v2 13/13] crypto/dpaa_sec: enable ipsec aes-ctr to use nonce Hemant Agrawal
2019-11-06  5:17   ` [dpdk-dev] [PATCH v3 01/13] crypto/dpaa_sec: fix to set PDCP capability flags Hemant Agrawal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 02/13] crypto/dpaa2_sec: add check for the session validity Hemant Agrawal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 03/13] crypto/dpaa_sec: " Hemant Agrawal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 04/13] crypto/dpaa2_sec: adding NULL cipher or NULL auth Hemant Agrawal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 05/13] crypto/dpaa_sec: " Hemant Agrawal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 06/13] crypto/dpaa2_sec: add AES-GCM support for lookaside case Hemant Agrawal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 07/13] crypto/dpaa_sec: " Hemant Agrawal
2019-11-07  8:48       ` Hemant Agrawal
2019-11-07 10:07         ` Akhil Goyal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 08/13] test/cryptodev: enable additional cases for dpaax Hemant Agrawal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 09/13] crypto/dpaa2_sec: enable warning with truncated sha256 Hemant Agrawal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 10/13] crypto/dpaa2_sec: remove unwanted context type check Hemant Agrawal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 11/13] crypto/dpaa_sec: use macros in queue attach and detach Hemant Agrawal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 12/13] crypto/dpaa2_sec: use aes-ctr initial counter as 1 Hemant Agrawal
2019-11-06  5:17     ` [dpdk-dev] [PATCH v3 13/13] crypto/dpaa_sec: enable ipsec aes-ctr to use nonce Hemant Agrawal
2019-11-06 13:09     ` [dpdk-dev] [PATCH v3 01/13] crypto/dpaa_sec: fix to set PDCP capability flags Akhil Goyal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191101175141.4663-4-hemant.agrawal@nxp.com \
    --to=hemant.agrawal@nxp.com \
    --cc=akhil.goyal@nxp.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).