From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>
Subject: [dpdk-dev] [PATCH 2/2] failsafe: implement xstats
Date: Fri, 1 Nov 2019 13:12:56 -0700 [thread overview]
Message-ID: <20191101201255.4853-3-stephen@networkplumber.org> (raw)
In-Reply-To: <20191101201255.4853-1-stephen@networkplumber.org>
Add support for extended statistics in failsafe driver.
Reports detailed statistics for each sub device.
Example:
testpmd> show port xstats 1
rx_good_packets: 0
tx_good_packets: 0
rx_good_bytes: 0
tx_good_bytes: 0
rx_missed_errors: 0
rx_errors: 0
tx_errors: 0
rx_mbuf_allocation_errors: 0
rx_q0packets: 0
rx_q0bytes: 0
rx_q0errors: 0
tx_q0packets: 0
tx_q0bytes: 0
rx_sub0_good_packets: 0
tx_sub0_good_packets: 0
...
rx_sub1_good_packets: 0
tx_sub1_good_packets: 0
rx_sub1_good_bytes: 0
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
drivers/net/failsafe/failsafe_ops.c | 152 ++++++++++++++++++++++++++++
1 file changed, 152 insertions(+)
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index 0afae6c71feb..a87e49b97d33 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -14,6 +14,7 @@
#include <rte_flow.h>
#include <rte_cycles.h>
#include <rte_ethdev.h>
+#include <rte_string_fns.h>
#include "failsafe_private.h"
@@ -881,6 +882,154 @@ fs_stats_reset(struct rte_eth_dev *dev)
return 0;
}
+static int
+__fs_xstats_count(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ int count = 0;
+ uint8_t i;
+ int ret;
+
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_xstats_get_names(PORT_ID(sdev), NULL, 0);
+ if (ret < 0)
+ return ret;
+ count += ret;
+ }
+
+ return count;
+}
+
+static int
+__fs_xstats_get_names(struct rte_eth_dev *dev,
+ struct rte_eth_xstat_name *xstats_names,
+ unsigned int limit)
+{
+ struct sub_device *sdev;
+ unsigned int count = 0;
+ uint8_t i;
+
+ /* Caller only cares about count */
+ if (!xstats_names)
+ return __fs_xstats_count(dev);
+
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+ struct rte_eth_xstat_name *sub_names = xstats_names + count;
+ int j, r;
+
+ if (count >= limit)
+ break;
+
+ r = rte_eth_xstats_get_names(PORT_ID(sdev),
+ sub_names, limit - count);
+ if (r < 0)
+ return r;
+
+ /* add subN_ prefix to names */
+ for (j = 0; j < r; j++) {
+ char *xname = sub_names[j].name;
+ char tmp[RTE_ETH_XSTATS_NAME_SIZE];
+
+ if ((xname[0] == 't' || xname[0] == 'r') &&
+ xname[1] == 'x' && xname[2] == '_')
+ snprintf(tmp, sizeof(tmp), "%.3ssub%u_%s",
+ xname, i, xname + 3);
+ else
+ snprintf(tmp, sizeof(tmp), "sub%u_%s",
+ i, xname);
+
+ strlcpy(xname, tmp, RTE_ETH_XSTATS_NAME_SIZE);
+ }
+ count += r;
+ }
+ return count;
+}
+
+static int
+fs_xstats_get_names(struct rte_eth_dev *dev,
+ struct rte_eth_xstat_name *xstats_names,
+ unsigned int limit)
+{
+ int ret;
+
+ fs_lock(dev, 0);
+ ret = __fs_xstats_get_names(dev, xstats_names, limit);
+ fs_unlock(dev, 0);
+ return ret;
+}
+
+static int
+__fs_xstats_get(struct rte_eth_dev *dev,
+ struct rte_eth_xstat *xstats,
+ unsigned int n)
+{
+ unsigned int count = 0;
+ struct sub_device *sdev;
+ uint8_t i;
+ int j, ret;
+
+ ret = __fs_xstats_count(dev);
+ /*
+ * if error
+ * or caller did not give enough space
+ * or just querying
+ */
+ if (ret < 0 || ret > (int)n || xstats == NULL)
+ return ret;
+
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+ ret = rte_eth_xstats_get(PORT_ID(sdev), xstats, n);
+ if (ret < 0)
+ return ret;
+
+ if (ret > (int)n)
+ return n + count;
+
+ /* add offset to id's from sub-device */
+ for (j = 0; j < ret; j++)
+ xstats[j].id += count;
+
+ xstats += ret;
+ n -= ret;
+ count += ret;
+ }
+
+ return count;
+}
+
+static int
+fs_xstats_get(struct rte_eth_dev *dev,
+ struct rte_eth_xstat *xstats,
+ unsigned int n)
+{
+ int ret;
+
+ fs_lock(dev, 0);
+ ret = __fs_xstats_get(dev, xstats, n);
+ fs_unlock(dev, 0);
+
+ return ret;
+}
+
+
+static int
+fs_xstats_reset(struct rte_eth_dev *dev)
+{
+ struct sub_device *sdev;
+ uint8_t i;
+ int r = 0;
+
+ fs_lock(dev, 0);
+ FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+ r = rte_eth_xstats_reset(PORT_ID(sdev));
+ if (r < 0)
+ break;
+ }
+ fs_unlock(dev, 0);
+
+ return r;
+}
+
static void
fs_dev_merge_desc_lim(struct rte_eth_desc_lim *to,
const struct rte_eth_desc_lim *from)
@@ -1331,6 +1480,9 @@ const struct eth_dev_ops failsafe_ops = {
.link_update = fs_link_update,
.stats_get = fs_stats_get,
.stats_reset = fs_stats_reset,
+ .xstats_get = fs_xstats_get,
+ .xstats_get_names = fs_xstats_get_names,
+ .xstats_reset = fs_xstats_reset,
.dev_infos_get = fs_dev_infos_get,
.dev_supported_ptypes_get = fs_dev_supported_ptypes_get,
.mtu_set = fs_mtu_set,
--
2.20.1
next prev parent reply other threads:[~2019-11-01 20:13 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-01 20:12 [dpdk-dev] [PATCH 0/2] xstats related patches Stephen Hemminger
2019-11-01 20:12 ` [dpdk-dev] [PATCH 1/2] app/testpmd: block xstats for hidden ports Stephen Hemminger
2019-11-04 11:25 ` Iremonger, Bernard
2019-11-01 20:12 ` Stephen Hemminger [this message]
2019-11-08 18:13 ` [dpdk-dev] [PATCH 2/2] failsafe: implement xstats Ferruh Yigit
2019-11-08 18:26 ` [dpdk-dev] [PATCH 0/2] xstats related patches Ferruh Yigit
-- strict thread matches above, loose matches on Subject: below --
2019-06-26 22:21 [dpdk-dev] [PATCH 0/2] failsafe: add xstats Stephen Hemminger
2019-06-26 22:21 ` [dpdk-dev] [PATCH 2/2] failsafe: implement xstats Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191101201255.4853-3-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).