From: Kalesh A P <kalesh-anakkur.purayil@broadcom.com>
To: dev@dpdk.org
Cc: ferruh.yigit@intel.com
Subject: [dpdk-dev] [PATCH v2 2/5] net/bnxt: fix redundant mac addr check
Date: Mon, 4 Nov 2019 15:32:37 +0530 [thread overview]
Message-ID: <20191104100240.28974-3-kalesh-anakkur.purayil@broadcom.com> (raw)
In-Reply-To: <20191104100240.28974-1-kalesh-anakkur.purayil@broadcom.com>
From: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
filter->mac_index is used to check, if a same mac is
already programmed. Hence, filter->dflt member is not
needed which is also used for mac addr redundancy check.
This patch fixes it by moving mac_index based redundant
check from bnxt_mac_addr_add_op to bnxt_add_mac_filter
Fixes: 6118503d8071 ("net/bnxt: fix VLAN filtering")
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
---
drivers/net/bnxt/bnxt_ethdev.c | 107 +++++++++++++++--------------------------
drivers/net/bnxt/bnxt_filter.c | 1 +
drivers/net/bnxt/bnxt_filter.h | 7 ++-
drivers/net/bnxt/bnxt_hwrm.c | 9 ++--
drivers/net/bnxt/bnxt_rxq.c | 2 +
5 files changed, 51 insertions(+), 75 deletions(-)
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index 7d9459f..0b0ce87 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -1018,8 +1018,7 @@ static void bnxt_mac_addr_remove_op(struct rte_eth_dev *eth_dev,
bnxt_hwrm_clear_l2_filter(bp, filter);
filter->mac_index = INVALID_MAC_INDEX;
memset(&filter->l2_addr, 0, RTE_ETHER_ADDR_LEN);
- STAILQ_INSERT_TAIL(&bp->free_filter_list,
- filter, next);
+ bnxt_free_filter(bp, filter);
}
filter = temp_filter;
}
@@ -1027,19 +1026,21 @@ static void bnxt_mac_addr_remove_op(struct rte_eth_dev *eth_dev,
}
static int bnxt_add_mac_filter(struct bnxt *bp, struct bnxt_vnic_info *vnic,
- struct rte_ether_addr *mac_addr, uint32_t index)
+ struct rte_ether_addr *mac_addr, uint32_t index,
+ uint32_t pool)
{
struct bnxt_filter_info *filter;
int rc = 0;
- filter = STAILQ_FIRST(&vnic->filter);
- /* During bnxt_mac_addr_add_op, default MAC is
- * already programmed, so skip it. But, when
- * hw-vlan-filter is turned OFF from ON, default
- * MAC filter should be restored
- */
- if (index == 0 && filter->dflt)
- return 0;
+ /* Attach requested MAC address to the new l2_filter */
+ STAILQ_FOREACH(filter, &vnic->filter, next) {
+ if (filter->mac_index == index) {
+ PMD_DRV_LOG(ERR,
+ "MAC addr already existed for pool %d\n",
+ pool);
+ return 0;
+ }
+ }
filter = bnxt_alloc_filter(bp);
if (!filter) {
@@ -1047,7 +1048,6 @@ static int bnxt_add_mac_filter(struct bnxt *bp, struct bnxt_vnic_info *vnic,
return -ENODEV;
}
- filter->mac_index = index;
/* bnxt_alloc_filter copies default MAC to filter->l2_addr. So,
* if the MAC that's been programmed now is a different one, then,
* copy that addr to filter->l2_addr
@@ -1058,14 +1058,12 @@ static int bnxt_add_mac_filter(struct bnxt *bp, struct bnxt_vnic_info *vnic,
rc = bnxt_hwrm_set_l2_filter(bp, vnic->fw_vnic_id, filter);
if (!rc) {
- if (filter->mac_index == 0) {
- filter->dflt = true;
+ filter->mac_index = index;
+ if (filter->mac_index == 0)
STAILQ_INSERT_HEAD(&vnic->filter, filter, next);
- } else {
+ else
STAILQ_INSERT_TAIL(&vnic->filter, filter, next);
- }
} else {
- filter->mac_index = INVALID_MAC_INDEX;
memset(&filter->l2_addr, 0, RTE_ETHER_ADDR_LEN);
bnxt_free_filter(bp, filter);
}
@@ -1079,7 +1077,6 @@ static int bnxt_mac_addr_add_op(struct rte_eth_dev *eth_dev,
{
struct bnxt *bp = eth_dev->data->dev_private;
struct bnxt_vnic_info *vnic = &bp->vnic_info[pool];
- struct bnxt_filter_info *filter;
int rc = 0;
rc = is_bnxt_in_error(bp);
@@ -1095,16 +1092,8 @@ static int bnxt_mac_addr_add_op(struct rte_eth_dev *eth_dev,
PMD_DRV_LOG(ERR, "VNIC not found for pool %d!\n", pool);
return -EINVAL;
}
- /* Attach requested MAC address to the new l2_filter */
- STAILQ_FOREACH(filter, &vnic->filter, next) {
- if (filter->mac_index == index) {
- PMD_DRV_LOG(ERR,
- "MAC addr already existed for pool %d\n", pool);
- return 0;
- }
- }
- rc = bnxt_add_mac_filter(bp, vnic, mac_addr, index);
+ rc = bnxt_add_mac_filter(bp, vnic, mac_addr, index, pool);
return rc;
}
@@ -1726,33 +1715,22 @@ static int bnxt_del_vlan_filter(struct bnxt *bp, uint16_t vlan_id)
int rc = 0;
uint32_t chk = HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN;
- /* if VLAN exists && VLAN matches vlan_id
- * remove the MAC+VLAN filter
- * add a new MAC only filter
- * else
- * VLAN filter doesn't exist, just skip and continue
- */
vnic = BNXT_GET_DEFAULT_VNIC(bp);
filter = STAILQ_FIRST(&vnic->filter);
while (filter) {
/* Search for this matching MAC+VLAN filter */
- if ((filter->enables & chk) &&
- (filter->l2_ivlan == vlan_id &&
- filter->l2_ivlan_mask != 0) &&
- !memcmp(filter->l2_addr, bp->mac_addr,
- RTE_ETHER_ADDR_LEN)) {
+ if (bnxt_vlan_filter_exists(bp, filter, chk, vlan_id)) {
/* Delete the filter */
rc = bnxt_hwrm_clear_l2_filter(bp, filter);
if (rc)
return rc;
STAILQ_REMOVE(&vnic->filter, filter,
bnxt_filter_info, next);
- STAILQ_INSERT_TAIL(&bp->free_filter_list, filter, next);
-
+ bnxt_free_filter(bp, filter);
PMD_DRV_LOG(INFO,
- "Del Vlan filter for %d\n",
+ "Deleted vlan filter for %d\n",
vlan_id);
- return rc;
+ return 0;
}
filter = STAILQ_NEXT(filter, next);
}
@@ -1780,11 +1758,7 @@ static int bnxt_add_vlan_filter(struct bnxt *bp, uint16_t vlan_id)
filter = STAILQ_FIRST(&vnic->filter);
/* Check if the VLAN has already been added */
while (filter) {
- if ((filter->enables & chk) &&
- (filter->l2_ivlan == vlan_id &&
- filter->l2_ivlan_mask == 0x0FFF) &&
- !memcmp(filter->l2_addr, bp->mac_addr,
- RTE_ETHER_ADDR_LEN))
+ if (bnxt_vlan_filter_exists(bp, filter, chk, vlan_id))
return -EEXIST;
filter = STAILQ_NEXT(filter, next);
@@ -1817,18 +1791,17 @@ static int bnxt_add_vlan_filter(struct bnxt *bp, uint16_t vlan_id)
* not able to create the filter in hardware.
*/
filter->fw_l2_filter_id = UINT64_MAX;
- STAILQ_INSERT_TAIL(&bp->free_filter_list, filter, next);
+ bnxt_free_filter(bp, filter);
return rc;
- } else {
- /* Add this new filter to the list */
- if (vlan_id == 0) {
- filter->dflt = true;
- STAILQ_INSERT_HEAD(&vnic->filter, filter, next);
- } else {
- STAILQ_INSERT_TAIL(&vnic->filter, filter, next);
- }
}
+ filter->mac_index = 0;
+ /* Add this new filter to the list */
+ if (vlan_id == 0)
+ STAILQ_INSERT_HEAD(&vnic->filter, filter, next);
+ else
+ STAILQ_INSERT_TAIL(&vnic->filter, filter, next);
+
PMD_DRV_LOG(INFO,
"Added Vlan filter for %d\n", vlan_id);
return rc;
@@ -1859,19 +1832,17 @@ static int bnxt_del_dflt_mac_filter(struct bnxt *bp,
filter = STAILQ_FIRST(&vnic->filter);
while (filter) {
- if (filter->dflt &&
+ if (filter->mac_index == 0 &&
!memcmp(filter->l2_addr, bp->mac_addr,
RTE_ETHER_ADDR_LEN)) {
rc = bnxt_hwrm_clear_l2_filter(bp, filter);
- if (rc)
- return rc;
- filter->dflt = false;
- STAILQ_REMOVE(&vnic->filter, filter,
- bnxt_filter_info, next);
- STAILQ_INSERT_TAIL(&bp->free_filter_list,
- filter, next);
- filter->fw_l2_filter_id = -1;
- break;
+ if (!rc) {
+ STAILQ_REMOVE(&vnic->filter, filter,
+ bnxt_filter_info, next);
+ bnxt_free_filter(bp, filter);
+ filter->fw_l2_filter_id = UINT64_MAX;
+ }
+ return rc;
}
filter = STAILQ_NEXT(filter, next);
}
@@ -1894,10 +1865,10 @@ bnxt_vlan_offload_set_op(struct rte_eth_dev *dev, int mask)
vnic = BNXT_GET_DEFAULT_VNIC(bp);
if (!(rx_offloads & DEV_RX_OFFLOAD_VLAN_FILTER)) {
/* Remove any VLAN filters programmed */
- for (i = 0; i < 4095; i++)
+ for (i = 0; i < RTE_ETHER_MAX_VLAN_ID; i++)
bnxt_del_vlan_filter(bp, i);
- rc = bnxt_add_mac_filter(bp, vnic, NULL, 0);
+ rc = bnxt_add_mac_filter(bp, vnic, NULL, 0, 0);
if (rc)
return rc;
} else {
diff --git a/drivers/net/bnxt/bnxt_filter.c b/drivers/net/bnxt/bnxt_filter.c
index 1c8e3e3..7e29468 100644
--- a/drivers/net/bnxt/bnxt_filter.c
+++ b/drivers/net/bnxt/bnxt_filter.c
@@ -34,6 +34,7 @@ struct bnxt_filter_info *bnxt_alloc_filter(struct bnxt *bp)
}
STAILQ_REMOVE_HEAD(&bp->free_filter_list, next);
+ filter->mac_index = INVALID_MAC_INDEX;
/* Default to L2 MAC Addr filter */
filter->flags = HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX;
filter->enables = HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR |
diff --git a/drivers/net/bnxt/bnxt_filter.h b/drivers/net/bnxt/bnxt_filter.h
index e09b435..7415b36 100644
--- a/drivers/net/bnxt/bnxt_filter.h
+++ b/drivers/net/bnxt/bnxt_filter.h
@@ -8,6 +8,12 @@
#include <rte_ether.h>
+#define bnxt_vlan_filter_exists(bp, filter, chk, vlan_id) \
+ (((filter)->enables & (chk)) && \
+ ((filter)->l2_ivlan == (vlan_id) && \
+ (filter)->l2_ivlan_mask == 0x0FFF) && \
+ !memcmp((filter)->l2_addr, (bp)->mac_addr, \
+ RTE_ETHER_ADDR_LEN))
struct bnxt;
#define BNXT_FLOW_L2_VALID_FLAG BIT(0)
@@ -71,7 +77,6 @@ struct bnxt_filter_info {
uint16_t ip_addr_type;
uint16_t ethertype;
uint32_t priority;
- uint8_t dflt;
};
struct bnxt_filter_info *bnxt_alloc_filter(struct bnxt *bp);
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index c777c73..daed4ee 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -2468,18 +2468,15 @@ int bnxt_set_hwrm_vnic_filters(struct bnxt *bp, struct bnxt_vnic_info *vnic)
int rc = 0;
STAILQ_FOREACH(filter, &vnic->filter, next) {
- if (filter->filter_type == HWRM_CFA_EM_FILTER) {
+ if (filter->filter_type == HWRM_CFA_EM_FILTER)
rc = bnxt_hwrm_set_em_filter(bp, filter->dst_id,
filter);
- } else if (filter->filter_type == HWRM_CFA_NTUPLE_FILTER) {
+ else if (filter->filter_type == HWRM_CFA_NTUPLE_FILTER)
rc = bnxt_hwrm_set_ntuple_filter(bp, filter->dst_id,
filter);
- } else {
+ else
rc = bnxt_hwrm_set_l2_filter(bp, vnic->fw_vnic_id,
filter);
- if (!rc)
- filter->dflt = 1;
- }
if (rc)
break;
}
diff --git a/drivers/net/bnxt/bnxt_rxq.c b/drivers/net/bnxt/bnxt_rxq.c
index d55adc3..6420281 100644
--- a/drivers/net/bnxt/bnxt_rxq.c
+++ b/drivers/net/bnxt/bnxt_rxq.c
@@ -63,6 +63,7 @@ int bnxt_mq_rx_configure(struct bnxt *bp)
rc = -ENOMEM;
goto err_out;
}
+ filter->mac_index = 0;
filter->flags |= HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST;
STAILQ_INSERT_TAIL(&vnic->filter, filter, next);
goto out;
@@ -146,6 +147,7 @@ int bnxt_mq_rx_configure(struct bnxt *bp)
rc = -ENOMEM;
goto err_out;
}
+ filter->mac_index = 0;
filter->flags |= HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST;
/*
* TODO: Configure & associate CFA rule for
--
2.10.1
next prev parent reply other threads:[~2019-11-04 9:51 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-04 10:02 [dpdk-dev] [PATCH v2 0/5] bnxt patchset with bug fixes Kalesh A P
2019-11-04 10:02 ` [dpdk-dev] [PATCH v2 1/5] net/bnxt: fix L4 checksum error indication in non-vector mode rx Kalesh A P
2019-11-04 10:02 ` Kalesh A P [this message]
2019-11-04 10:02 ` [dpdk-dev] [PATCH v2 3/5] net/bnxt: fix vnic allocation failure on port toggle Kalesh A P
2019-11-04 10:02 ` [dpdk-dev] [PATCH v2 4/5] net/bnxt: fix a failure case during initialization Kalesh A P
2019-11-04 10:02 ` [dpdk-dev] [PATCH v2 5/5] net/bnxt: fix incorrect COS queue mapping Kalesh A P
2019-11-04 22:50 ` [dpdk-dev] [PATCH v3 0/5] bnxt patchset with bug fixes Ajit Khaparde
2019-11-04 22:50 ` [dpdk-dev] [PATCH v3 1/5] net/bnxt: fix L4 checksum indication in non-vector Rx Ajit Khaparde
2019-11-04 22:50 ` [dpdk-dev] [PATCH v3 2/5] net/bnxt: fix redundant MAC address check Ajit Khaparde
2019-11-04 22:50 ` [dpdk-dev] [PATCH v3 3/5] net/bnxt: fix vnic allocation failure on port toggle Ajit Khaparde
2019-11-04 22:50 ` [dpdk-dev] [PATCH v3 4/5] net/bnxt: fix a failure case during initialization Ajit Khaparde
2019-11-04 22:50 ` [dpdk-dev] [PATCH v3 5/5] net/bnxt: fix incorrect COS queue mapping Ajit Khaparde
2019-11-04 23:12 ` [dpdk-dev] [PATCH v3 0/5] bnxt patchset with bug fixes Ajit Khaparde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191104100240.28974-3-kalesh-anakkur.purayil@broadcom.com \
--to=kalesh-anakkur.purayil@broadcom.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).