DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH v1] doc/power: add commands for core query from VM
@ 2019-11-15 12:51 David Hunt
  2019-11-15 13:05 ` Mcnamara, John
  2019-11-26 16:35 ` David Marchand
  0 siblings, 2 replies; 3+ messages in thread
From: David Hunt @ 2019-11-15 12:51 UTC (permalink / raw)
  To: dev; +Cc: john.mcnamara, David Hunt

This patch adds some minor updates for the vm_power_manager and guest_cli
example applications.

Now that the virtio-serial channels between vm_power manager and
the guest_cli has bi-directional capability, there are some new commands.

Firstly, the command in vm_power_manager to enable queries for a given VM:

  * set_query {vm_name} enable|disable

Then, commands to query the frequencies and capabilities of the cores
in the VM:

  * query_cpu_freq {core_num}|all
  * query_cpu_caps {core_num}|all

Signed-off-by: David Hunt <david.hunt@intel.com>
---
 .../sample_app_ug/vm_power_management.rst     | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/doc/guides/sample_app_ug/vm_power_management.rst b/doc/guides/sample_app_ug/vm_power_management.rst
index 0ffff835e..f5e24b25d 100644
--- a/doc/guides/sample_app_ug/vm_power_management.rst
+++ b/doc/guides/sample_app_ug/vm_power_management.rst
@@ -309,6 +309,12 @@ A number of commands can be issued via the CLI in relation to VMs:
 
     set_pcpu {vm_name} {vcpu} {pcpu}
 
+  Enable query of physical core information from a VM:
+
+  .. code-block:: console
+
+    set_query {vm_name} enable|disable
+
 Manual control and inspection can also be carried in relation CPU frequency scaling:
 
   Get the current frequency for each core specified in the mask:
@@ -746,6 +752,23 @@ Where {core_num} is the lcore and channel to change frequency by scaling up/down
 
   set_cpu_freq {core_num} up|down|min|max
 
+
+To query the available frequences of an lcore, use the query_cpu_freq command.
+Where {core_num} is the lcore to query.
+Before using this command, please enable responses via the set_query command on the host.
+
+.. code-block:: console
+
+  query_cpu_freq {core_num}|all
+
+To query the capabilities of an lcore, use the query_cpu_caps command.
+Where {core_num} is the lcore to query.
+Before using this command, please enable responses via the set_query command on the host.
+
+.. code-block:: console
+
+  query_cpu_caps {core_num}|all
+
 To start the application and configure the power policy, and send it to the host:
 
 .. code-block:: console
-- 
2.17.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2019-11-26 16:35 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-15 12:51 [dpdk-dev] [PATCH v1] doc/power: add commands for core query from VM David Hunt
2019-11-15 13:05 ` Mcnamara, John
2019-11-26 16:35 ` David Marchand

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).