From: Shougang Wang <shougangx.wang@intel.com>
To: dev@dpdk.org
Cc: wenzhuo.lu@intel.com, qiming.yang@intel.com,
Shougang Wang <shougangx.wang@intel.com>
Subject: [dpdk-dev] [PATCH] net/ixgbe: fix qos sched sample app performance drop
Date: Wed, 20 Nov 2019 08:07:43 +0000 [thread overview]
Message-ID: <20191120080743.26405-1-shougangx.wang@intel.com> (raw)
Currently MACsec register is set without any conditions when start port.
It should be set only when user needs. To avoid wild value, I add init
function. This patch fixes the issue.
Fixes: 50556c88104c ("net/ixgbe: fix MACsec setting")
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
---
drivers/net/ixgbe/ixgbe_ethdev.c | 31 ++++++++++++++++++++++++++-----
1 file changed, 26 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 8c1caac18..d54eec1c6 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -379,6 +379,8 @@ static int ixgbe_dev_udp_tunnel_port_del(struct rte_eth_dev *dev,
static int ixgbe_filter_restore(struct rte_eth_dev *dev);
static void ixgbe_l2_tunnel_conf(struct rte_eth_dev *dev);
+static void ixgbe_dev_macsec_init(struct rte_eth_dev *dev);
+
/*
* Define VF Stats MACRO for Non "cleared on read" register
*/
@@ -1095,6 +1097,8 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
PMD_INIT_FUNC_TRACE();
+ ixgbe_dev_macsec_init(eth_dev);
+
eth_dev->dev_ops = &ixgbe_eth_dev_ops;
eth_dev->rx_pkt_burst = &ixgbe_recv_pkts;
eth_dev->tx_pkt_burst = &ixgbe_xmit_pkts;
@@ -2545,7 +2549,7 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
uint32_t *link_speeds;
struct ixgbe_tm_conf *tm_conf =
IXGBE_DEV_PRIVATE_TO_TM_CONF(dev->data->dev_private);
- struct ixgbe_macsec_setting *macsec_ctrl =
+ struct ixgbe_macsec_setting *macsec_setting =
IXGBE_DEV_PRIVATE_TO_MACSEC_SETTING(dev->data->dev_private);
PMD_INIT_FUNC_TRACE();
@@ -2799,9 +2803,11 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
*/
ixgbe_dev_link_update(dev, 0);
- /* setup the macsec ctrl register */
- ixgbe_dev_macsec_register_enable(dev, macsec_ctrl);
-
+ /* setup the macsec setting register */
+ if (macsec_setting->encrypt_en != 0 ||
+ macsec_setting->replayprotect_en != 0) {
+ ixgbe_dev_macsec_register_enable(dev, macsec_setting);
+ }
return 0;
error:
@@ -2827,6 +2833,8 @@ ixgbe_dev_stop(struct rte_eth_dev *dev)
int vf;
struct ixgbe_tm_conf *tm_conf =
IXGBE_DEV_PRIVATE_TO_TM_CONF(dev->data->dev_private);
+ struct ixgbe_macsec_setting *macsec_setting =
+ IXGBE_DEV_PRIVATE_TO_MACSEC_SETTING(dev->data->dev_private);
if (hw->adapter_stopped)
return;
@@ -2834,7 +2842,10 @@ ixgbe_dev_stop(struct rte_eth_dev *dev)
PMD_INIT_FUNC_TRACE();
/* disable mecsec register */
- ixgbe_dev_macsec_register_disable(dev);
+ if (macsec_setting->encrypt_en != 0 ||
+ macsec_setting->replayprotect_en != 0) {
+ ixgbe_dev_macsec_register_disable(dev);
+ }
rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
@@ -8977,6 +8988,16 @@ ixgbe_dev_macsec_register_disable(struct rte_eth_dev *dev)
ixgbe_enable_sec_tx_path_generic(hw);
}
+static void
+ixgbe_dev_macsec_init(struct rte_eth_dev *dev)
+{
+ struct ixgbe_macsec_setting *macsec =
+ IXGBE_DEV_PRIVATE_TO_MACSEC_SETTING(dev->data->dev_private);
+
+ macsec->encrypt_en = 0;
+ macsec->replayprotect_en = 0;
+}
+
RTE_PMD_REGISTER_PCI(net_ixgbe, rte_ixgbe_pmd);
RTE_PMD_REGISTER_PCI_TABLE(net_ixgbe, pci_id_ixgbe_map);
RTE_PMD_REGISTER_KMOD_DEP(net_ixgbe, "* igb_uio | uio_pci_generic | vfio-pci");
--
2.17.1
next reply other threads:[~2019-11-20 8:56 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-20 8:07 Shougang Wang [this message]
2019-11-20 15:02 ` Ye Xiaolong
2019-11-21 5:43 ` Wang, ShougangX
2019-11-21 7:32 ` [dpdk-dev] [PATCH v2] net/ixgbe: fix QoS performance drop issue Shougang Wang
2019-11-21 8:53 ` Ye Xiaolong
2019-11-21 14:32 ` Ye Xiaolong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191120080743.26405-1-shougangx.wang@intel.com \
--to=shougangx.wang@intel.com \
--cc=dev@dpdk.org \
--cc=qiming.yang@intel.com \
--cc=wenzhuo.lu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).