DPDK patches and discussions
 help / color / Atom feed
* [dpdk-dev] [PATCH] doc: update qede PMD guide
@ 2019-11-22  7:51 Rasesh Mody
  2019-11-22 14:32 ` Ferruh Yigit
  2019-11-22 23:31 ` [dpdk-dev] [PATCH v2] " Rasesh Mody
  0 siblings, 2 replies; 5+ messages in thread
From: Rasesh Mody @ 2019-11-22  7:51 UTC (permalink / raw)
  To: dev, Thomas Monjalon; +Cc: Rasesh Mody, GR-Everest-DPDK-Dev

 - Add note for Co-existence of DPDK and Linux drivers.
 - Update the firmware version in example.
 - Add Config note for potential error due to lack of memzone desciptor

Signed-off-by: Rasesh Mody <rmody@marvell.com>
 doc/guides/nics/qede.rst | 25 ++++++++++++++++++++-----
 1 file changed, 20 insertions(+), 5 deletions(-)

diff --git a/doc/guides/nics/qede.rst b/doc/guides/nics/qede.rst
index 2f4045795..9c14dd006 100644
--- a/doc/guides/nics/qede.rst
+++ b/doc/guides/nics/qede.rst
@@ -70,6 +70,10 @@ Co-existence considerations
   to the PFs of a given adapter and either qede PMD or Linux drivers
   (qed and qede) can be bound to the VFs of the adapter.
+- To use DPDK on some PFs and Linux drivers on other PFs of an adapter,
+  create a VF each on the PFs where DPDK will be used, attach DPDK to
+  these VFs and Linux drivers to the other PFs where no VFs are created.
 Supported QLogic Adapters
@@ -82,9 +86,7 @@ Prerequisites
   inbox in certain newer Linux distros under the standard directory
   ``E.g. /lib/firmware/qed/qed_init_values-``.
   If the required firmware files are not available then download it from
-  `linux-firmware git repository <http://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/qed>`_
-  or `QLogic Driver Download Center <http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/DefaultNewSearch.aspx>`_.
-  To download firmware file from QLogic website, select adapter category, model and DPDK Poll Mode Driver.
+  `linux-firmware git repository <http://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/qed>`_.
 - Requires the NIC be updated minimally with **8.30.x.x** Management firmware(MFW) version supported for that NIC.
   It is highly recommended that the NIC be updated with the latest available management firmware version to get latest feature  set.
@@ -99,7 +101,6 @@ Prerequisites
   `QLogic Driver Download Center <http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/DefaultNewSearch.aspx>`_.
   For downloading PF driver, select adapter category, model and Linux distro.
 Performance note
@@ -126,12 +127,26 @@ enabling debugging options may affect system performance.
 - ``CONFIG_RTE_LIBRTE_QEDE_FW`` (default **""**)
   Gives absolute path of firmware file.
-  ``Eg: "/lib/firmware/qed/qed_init_values-"``
+  ``Eg: "/lib/firmware/qed/qed_init_values-"``
   Empty string indicates driver will pick up the firmware file
   from the default location /lib/firmware/qed.
   CAUTION this option is more for custom firmware, it is not
   recommended for use under normal condition.
+Config notes
+When there are multiple adapters and/or large number of Rx/Tx queues
+configured on the adapters, the default (2560) number of memzone
+descriptors may not be enough. Please increase the number of memzone
+descriptors to a higher number as needed. When sufficient number of
+memzone descriptors are not configured, user can potentially run into
+following error.
+   .. code-block:: console
+      EAL: memzone_reserve_aligned_thread_unsafe(): No more room in config
 Driver compilation and testing

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-22  7:51 [dpdk-dev] [PATCH] doc: update qede PMD guide Rasesh Mody
2019-11-22 14:32 ` Ferruh Yigit
2019-11-22 19:42   ` [dpdk-dev] [EXT] " Rasesh Mody
2019-11-22 23:31 ` [dpdk-dev] [PATCH v2] " Rasesh Mody
2019-11-25 15:32   ` Ferruh Yigit

DPDK patches and discussions

Archives are clonable:
	git clone --mirror http://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ http://inbox.dpdk.org/dev \
	public-inbox-index dev

Newsgroup available over NNTP:

AGPL code for this site: git clone https://public-inbox.org/ public-inbox