From: Neil Horman <nhorman@tuxdriver.com>
To: David Marchand <david.marchand@redhat.com>
Cc: dev@dpdk.org, thomas@monjalon.net, arybchenko@solarflare.com,
stable@dpdk.org, Ray Kinsella <mdr@ashroe.eu>,
John McNamara <john.mcnamara@intel.com>,
Marko Kovacevic <marko.kovacevic@intel.com>,
Qiming Yang <qiming.yang@intel.com>,
Wenzhuo Lu <wenzhuo.lu@intel.com>,
Declan Doherty <declan.doherty@intel.com>,
Adrien Mazarguil <adrien.mazarguil@6wind.com>,
Ferruh Yigit <ferruh.yigit@intel.com>,
Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Subject: Re: [dpdk-dev] [RFC PATCH] mark experimental variables
Date: Tue, 26 Nov 2019 09:22:12 -0500 [thread overview]
Message-ID: <20191126142212.GC21200@hmswarspite.think-freely.org> (raw)
In-Reply-To: <20191125161314.18804-1-david.marchand@redhat.com>
On Mon, Nov 25, 2019 at 05:13:14PM +0100, David Marchand wrote:
> So far, we did not pay attention to direct access to variables but they
> are part of the API/ABI too and should be clearly identified.
>
> Introduce a __rte_experimental_var tag and mark existing variables.
>
> Fixes: a4bcd61de82d ("buildtools: add script to check experimental API exports")
> Cc: stable@dpdk.org
>
> Signed-off-by: David Marchand <david.marchand@redhat.com>
> ---
> Quick patch to try to catch experimental variables.
> Not sure if we could use a single section, so please advise if there is
> better to do about this.
>
I don't see any definition of __rte_experimental_var here, won't the
preprocessor choke on this when you try to compile without that?
Neil
> ---
> buildtools/check-experimental-syms.sh | 17 +++++++++++++++--
> devtools/checkpatches.sh | 14 +++++++++-----
> doc/guides/contributing/abi_policy.rst | 7 ++++---
> drivers/net/ice/rte_pmd_ice.h | 3 +++
> lib/librte_cryptodev/rte_crypto_asym.h | 3 +++
> lib/librte_eal/common/include/rte_compat.h | 5 +++++
> lib/librte_ethdev/rte_flow.h | 17 +++++++++++++++++
> lib/librte_port/rte_port_eventdev.h | 5 +++++
> 8 files changed, 61 insertions(+), 10 deletions(-)
>
> diff --git a/buildtools/check-experimental-syms.sh b/buildtools/check-experimental-syms.sh
> index f3603e5ba..27f7b39f6 100755
> --- a/buildtools/check-experimental-syms.sh
> +++ b/buildtools/check-experimental-syms.sh
> @@ -34,13 +34,26 @@ do
> Please add __rte_experimental to the definition of $SYM
> END_OF_MESSAGE
> ret=1
> + elif grep -q "\.data.*[[:space:]]$SYM$" $DUMPFILE &&
> + ! grep -q "\.data\.experimental.*[[:space:]]$SYM$" $DUMPFILE
> + then
> + cat >&2 <<- END_OF_MESSAGE
> + $SYM is not flagged as experimental
> + but is listed in version map
> + Please add __rte_experimental_var to the definition of $SYM
> + END_OF_MESSAGE
> + ret=1
> fi
> done
>
> # Filter out symbols suffixed with a . for icc
> for SYM in `awk '{
> - if ($2 != "l" && $4 == ".text.experimental" && !($NF ~ /\.$/)) {
> - print $NF
> + if ($2 == "l" || $NF ~ /\.$/) {
> + next;
> + }
> + if ($4 == ".text.experimental" ||
> + $4 == ".data.experimental") {
> + print $NF;
> }
> }' $DUMPFILE`
> do
> diff --git a/devtools/checkpatches.sh b/devtools/checkpatches.sh
> index b16bace92..d3d02b8ce 100755
> --- a/devtools/checkpatches.sh
> +++ b/devtools/checkpatches.sh
> @@ -90,11 +90,15 @@ check_experimental_tags() { # <patch>
> "headers ("current_file")";
> ret = 1;
> }
> - if ($1 != "+__rte_experimental" || $2 != "") {
> - print "__rte_experimental must appear alone on the line" \
> - " immediately preceding the return type of a function."
> - ret = 1;
> +
> + if (NF == 1 && ($1 == "+__rte_experimental" ||
> + $1 == "+__rte_experimental_var")) {
> + next;
> }
> + print "__rte_experimental or __rte_experimental_var must " \
> + "appear alone on the line immediately preceding the " \
> + "return type of a function.";
> + ret = 1;
> }
> END {
> exit ret;
> @@ -178,7 +182,7 @@ check () { # <patch> <commit> <title>
> ret=1
> fi
>
> - ! $verbose || printf '\nChecking __rte_experimental tags:\n'
> + ! $verbose || printf '\nChecking __rte_experimental* tags:\n'
> report=$(check_experimental_tags "$tmpinput")
> if [ $? -ne 0 ] ; then
> $headline_printed || print_headline "$3"
> diff --git a/doc/guides/contributing/abi_policy.rst b/doc/guides/contributing/abi_policy.rst
> index 05ca95980..189ef6491 100644
> --- a/doc/guides/contributing/abi_policy.rst
> +++ b/doc/guides/contributing/abi_policy.rst
> @@ -300,9 +300,10 @@ Note that marking an API as experimental is a multi step process.
> To mark an API as experimental, the symbols which are desired to be exported
> must be placed in an EXPERIMENTAL version block in the corresponding libraries'
> version map script.
> -Secondly, the corresponding prototypes of those exported functions (in the
> -development header files), must be marked with the ``__rte_experimental`` tag
> -(see ``rte_compat.h``).
> +Secondly, the corresponding prototypes of those exported functions (resp.
> +variables) must be marked with the ``__rte_experimental`` (resp.
> +``__rte_experimental_var``) tag in the development header files (see
> +``rte_compat.h``).
> The DPDK build makefiles perform a check to ensure that the map file and the
> C code reflect the same list of symbols.
> This check can be circumvented by defining ``ALLOW_EXPERIMENTAL_API``
> diff --git a/drivers/net/ice/rte_pmd_ice.h b/drivers/net/ice/rte_pmd_ice.h
> index e254db053..dbd5586d4 100644
> --- a/drivers/net/ice/rte_pmd_ice.h
> +++ b/drivers/net/ice/rte_pmd_ice.h
> @@ -15,6 +15,8 @@
> */
>
> #include <stdio.h>
> +
> +#include <rte_compat.h>
> #include <rte_mbuf.h>
> #include <rte_mbuf_dyn.h>
>
> @@ -81,6 +83,7 @@ union rte_net_ice_proto_xtr_metadata {
> };
>
> /* Offset of mbuf dynamic field for protocol extraction data */
> +__rte_experimental_var
> extern int rte_net_ice_dynfield_proto_xtr_metadata_offs;
>
> /* Mask of mbuf dynamic flags for protocol extraction type */
> diff --git a/lib/librte_cryptodev/rte_crypto_asym.h b/lib/librte_cryptodev/rte_crypto_asym.h
> index 0d34ce8df..d4e84910f 100644
> --- a/lib/librte_cryptodev/rte_crypto_asym.h
> +++ b/lib/librte_cryptodev/rte_crypto_asym.h
> @@ -24,6 +24,7 @@ extern "C" {
> #include <rte_memory.h>
> #include <rte_mempool.h>
> #include <rte_common.h>
> +#include <rte_compat.h>
>
> #include "rte_crypto_sym.h"
>
> @@ -37,10 +38,12 @@ typedef struct rte_crypto_param_t {
> } rte_crypto_param;
>
> /** asym xform type name strings */
> +__rte_experimental_var
> extern const char *
> rte_crypto_asym_xform_strings[];
>
> /** asym operations type name strings */
> +__rte_experimental_var
> extern const char *
> rte_crypto_asym_op_strings[];
>
> diff --git a/lib/librte_eal/common/include/rte_compat.h b/lib/librte_eal/common/include/rte_compat.h
> index 3eb33784b..3fd05179f 100644
> --- a/lib/librte_eal/common/include/rte_compat.h
> +++ b/lib/librte_eal/common/include/rte_compat.h
> @@ -11,11 +11,16 @@
> #define __rte_experimental \
> __attribute__((deprecated("Symbol is not yet part of stable ABI"), \
> section(".text.experimental")))
> +#define __rte_experimental_var \
> +__attribute__((deprecated("Symbol is not yet part of stable ABI"), \
> +section(".data.experimental")))
>
> #else
>
> #define __rte_experimental \
> __attribute__((section(".text.experimental")))
> +#define __rte_experimental_var \
> +__attribute__((section(".data.experimental")))
>
> #endif
>
> diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
> index 452d359a1..c8ea71acc 100644
> --- a/lib/librte_ethdev/rte_flow.h
> +++ b/lib/librte_ethdev/rte_flow.h
> @@ -19,6 +19,7 @@
>
> #include <rte_arp.h>
> #include <rte_common.h>
> +#include <rte_compat.h>
> #include <rte_ether.h>
> #include <rte_icmp.h>
> #include <rte_ip.h>
> @@ -2531,9 +2532,11 @@ struct rte_flow_action_set_meta {
> };
>
> /* Mbuf dynamic field offset for metadata. */
> +__rte_experimental_var
> extern int rte_flow_dynf_metadata_offs;
>
> /* Mbuf dynamic field flag mask for metadata. */
> +__rte_experimental_var
> extern uint64_t rte_flow_dynf_metadata_mask;
>
> /* Mbuf dynamic field pointer for metadata. */
> @@ -2548,14 +2551,24 @@ __rte_experimental
> static inline uint32_t
> rte_flow_dynf_metadata_get(struct rte_mbuf *m)
> {
> +#ifdef ALLOW_EXPERIMENTAL_API
> return *RTE_FLOW_DYNF_METADATA(m);
> +#else
> + RTE_SET_USED(m);
> + return 0;
> +#endif
> }
>
> __rte_experimental
> static inline void
> rte_flow_dynf_metadata_set(struct rte_mbuf *m, uint32_t v)
> {
> +#ifdef ALLOW_EXPERIMENTAL_API
> *RTE_FLOW_DYNF_METADATA(m) = v;
> +#else
> + RTE_SET_USED(m);
> + RTE_SET_USED(v);
> +#endif
> }
>
> /*
> @@ -2800,7 +2813,11 @@ __rte_experimental
> static inline int
> rte_flow_dynf_metadata_avail(void)
> {
> +#ifdef ALLOW_EXPERIMENTAL_API
> return !!rte_flow_dynf_metadata_mask;
> +#else
> + return 0;
> +#endif
> }
>
> /**
> diff --git a/lib/librte_port/rte_port_eventdev.h b/lib/librte_port/rte_port_eventdev.h
> index acf88f4e9..59246e204 100644
> --- a/lib/librte_port/rte_port_eventdev.h
> +++ b/lib/librte_port/rte_port_eventdev.h
> @@ -25,6 +25,8 @@ extern "C" {
> **/
>
> #include <stdint.h>
> +
> +#include <rte_compat.h>
> #include <rte_eventdev.h>
>
> #include "rte_port.h"
> @@ -39,6 +41,7 @@ struct rte_port_eventdev_reader_params {
> };
>
> /** Eventdev_reader port operations. */
> +__rte_experimental_var
> extern struct rte_port_in_ops rte_port_eventdev_reader_ops;
>
> /** Eventdev_writer port parameters. */
> @@ -63,6 +66,7 @@ struct rte_port_eventdev_writer_params {
> };
>
> /** Eventdev_writer port operations. */
> +__rte_experimental_var
> extern struct rte_port_out_ops rte_port_eventdev_writer_ops;
>
> /** Event_writer_nodrop port parameters. */
> @@ -90,6 +94,7 @@ struct rte_port_eventdev_writer_nodrop_params {
> };
>
> /** Eventdev_writer_nodrop port operations. */
> +__rte_experimental_var
> extern struct rte_port_out_ops rte_port_eventdev_writer_nodrop_ops;
>
> #ifdef __cplusplus
> --
> 2.23.0
>
>
next prev parent reply other threads:[~2019-11-26 14:22 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-25 16:13 David Marchand
2019-11-26 9:25 ` Ray Kinsella
2019-11-26 9:50 ` David Marchand
2019-11-26 14:15 ` Neil Horman
2019-11-26 14:22 ` Neil Horman [this message]
2019-11-27 20:45 ` David Marchand
2019-11-29 11:43 ` Neil Horman
2019-11-29 12:03 ` David Marchand
2019-12-02 15:20 ` [dpdk-dev] [PATCH] " David Marchand
2019-12-03 8:33 ` Andrew Rybchenko
2019-12-03 15:26 ` Neil Horman
2020-01-09 14:13 ` [dpdk-dev] [dpdk-stable] " Thomas Monjalon
2020-01-09 16:49 ` David Marchand
2023-06-12 2:49 ` [dpdk-dev] [RFC PATCH] " Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191126142212.GC21200@hmswarspite.think-freely.org \
--to=nhorman@tuxdriver.com \
--cc=adrien.mazarguil@6wind.com \
--cc=arybchenko@solarflare.com \
--cc=cristian.dumitrescu@intel.com \
--cc=david.marchand@redhat.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=john.mcnamara@intel.com \
--cc=marko.kovacevic@intel.com \
--cc=mdr@ashroe.eu \
--cc=qiming.yang@intel.com \
--cc=stable@dpdk.org \
--cc=thomas@monjalon.net \
--cc=wenzhuo.lu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).