DPDK patches and discussions
 help / color / mirror / Atom feed
From: Sunil Kumar Kori <skori@marvell.com>
To: Jerin Jacob <jerinj@marvell.com>,
	Nithin Dabilpuram <ndabilpuram@marvell.com>,
	Vamsi Attunuru <vattunuru@marvell.com>
Cc: <dev@dpdk.org>, Sunil Kumar Kori <skori@marvell.com>
Subject: [dpdk-dev] [PATCH v2 2/4] common/octeontx2: add interrupt offset to mbox structure
Date: Wed, 27 Nov 2019 15:52:20 +0530	[thread overview]
Message-ID: <20191127102222.31940-2-skori@marvell.com> (raw)
In-Reply-To: <20191127102222.31940-1-skori@marvell.com>

mbox response are triggered at bar2 + RVU_PF_INT or bar2 + RVU_VF_INT,
depending upon the device. To process these interrupts different irq
handlers are installed. To unify it, added offset field into mbox
structure which is initialized with RVU_PF_INT or RVU_VF_INT at the time
of otx2_mbox_init.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
---
v2:
 * Rebased patch on 19.11-rc4

 drivers/common/octeontx2/otx2_dev.c  | 14 ++++++++++----
 drivers/common/octeontx2/otx2_mbox.c |  5 +++--
 drivers/common/octeontx2/otx2_mbox.h |  5 +++--
 3 files changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/common/octeontx2/otx2_dev.c b/drivers/common/octeontx2/otx2_dev.c
index 0fc799e4a..6f29d6108 100644
--- a/drivers/common/octeontx2/otx2_dev.c
+++ b/drivers/common/octeontx2/otx2_dev.c
@@ -900,6 +900,7 @@ otx2_dev_priv_init(struct rte_pci_device *pci_dev, void *otx2_dev)
 {
 	int up_direction = MBOX_DIR_PFAF_UP;
 	int rc, direction = MBOX_DIR_PFAF;
+	uint64_t intr_offset = RVU_PF_INT;
 	struct otx2_dev *dev = otx2_dev;
 	uintptr_t bar2, bar4;
 	uint64_t bar4_addr;
@@ -924,15 +925,18 @@ otx2_dev_priv_init(struct rte_pci_device *pci_dev, void *otx2_dev)
 	if (otx2_dev_is_vf(dev)) {
 		direction = MBOX_DIR_VFPF;
 		up_direction = MBOX_DIR_VFPF_UP;
+		intr_offset = RVU_VF_INT;
 	}
 
 	/* Initialize the local mbox */
-	rc = otx2_mbox_init(&dev->mbox_local, bar4, bar2, direction, 1);
+	rc = otx2_mbox_init(&dev->mbox_local, bar4, bar2, direction, 1,
+			    intr_offset);
 	if (rc)
 		goto error;
 	dev->mbox = &dev->mbox_local;
 
-	rc = otx2_mbox_init(&dev->mbox_up, bar4, bar2, up_direction, 1);
+	rc = otx2_mbox_init(&dev->mbox_up, bar4, bar2, up_direction, 1,
+			    intr_offset);
 	if (rc)
 		goto error;
 
@@ -967,13 +971,15 @@ otx2_dev_priv_init(struct rte_pci_device *pci_dev, void *otx2_dev)
 		}
 		/* Init mbox object */
 		rc = otx2_mbox_init(&dev->mbox_vfpf, (uintptr_t)hwbase,
-				    bar2, MBOX_DIR_PFVF, pci_dev->max_vfs);
+				    bar2, MBOX_DIR_PFVF, pci_dev->max_vfs,
+				    intr_offset);
 		if (rc)
 			goto iounmap;
 
 		/* PF -> VF UP messages */
 		rc = otx2_mbox_init(&dev->mbox_vfpf_up, (uintptr_t)hwbase,
-				    bar2, MBOX_DIR_PFVF_UP, pci_dev->max_vfs);
+				    bar2, MBOX_DIR_PFVF_UP, pci_dev->max_vfs,
+				    intr_offset);
 		if (rc)
 			goto mbox_fini;
 	}
diff --git a/drivers/common/octeontx2/otx2_mbox.c b/drivers/common/octeontx2/otx2_mbox.c
index c359bf42f..ad8e0c3aa 100644
--- a/drivers/common/octeontx2/otx2_mbox.c
+++ b/drivers/common/octeontx2/otx2_mbox.c
@@ -59,12 +59,13 @@ otx2_mbox_reset(struct otx2_mbox *mbox, int devid)
 }
 
 int
-otx2_mbox_init(struct otx2_mbox *mbox, uintptr_t hwbase,
-	       uintptr_t reg_base, int direction, int ndevs)
+otx2_mbox_init(struct otx2_mbox *mbox, uintptr_t hwbase, uintptr_t reg_base,
+	       int direction, int ndevs, uint64_t intr_offset)
 {
 	struct otx2_mbox_dev *mdev;
 	int devid;
 
+	mbox->intr_offset = intr_offset;
 	mbox->reg_base = reg_base;
 	mbox->hwbase = hwbase;
 
diff --git a/drivers/common/octeontx2/otx2_mbox.h b/drivers/common/octeontx2/otx2_mbox.h
index e0e4e2f63..162d12468 100644
--- a/drivers/common/octeontx2/otx2_mbox.h
+++ b/drivers/common/octeontx2/otx2_mbox.h
@@ -73,6 +73,7 @@ struct otx2_mbox {
 	uint16_t tx_size;  /* Size of Tx region */
 	uint16_t ndevs;    /* The number of peers */
 	struct otx2_mbox_dev *dev;
+	uint64_t intr_offset; /* offset to interrupt register */
 };
 
 /* Header which precedes all mbox messages */
@@ -1562,8 +1563,8 @@ struct tim_enable_rsp {
 const char *otx2_mbox_id2name(uint16_t id);
 int otx2_mbox_id2size(uint16_t id);
 void otx2_mbox_reset(struct otx2_mbox *mbox, int devid);
-int otx2_mbox_init(struct otx2_mbox *mbox, uintptr_t hwbase,
-		   uintptr_t reg_base, int direction, int ndevs);
+int otx2_mbox_init(struct otx2_mbox *mbox, uintptr_t hwbase, uintptr_t reg_base,
+		   int direction, int ndevsi, uint64_t intr_offset);
 void otx2_mbox_fini(struct otx2_mbox *mbox);
 void otx2_mbox_msg_send(struct otx2_mbox *mbox, int devid);
 int otx2_mbox_wait_for_rsp(struct otx2_mbox *mbox, int devid);
-- 
2.17.1


  reply	other threads:[~2019-11-27 10:23 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-25 11:35 [dpdk-dev] [PATCH 1/5] drivers/octeontx2: allow experimental symbols Sunil Kumar Kori
2019-11-25 11:35 ` [dpdk-dev] [PATCH v3 2/5] eal: add API to check if its interrupt context Sunil Kumar Kori
2019-11-25 11:35 ` [dpdk-dev] [PATCH 3/5] common/octeontx2: add interrupt offset to mbox structure Sunil Kumar Kori
2019-11-25 11:35 ` [dpdk-dev] [PATCH 4/5] common/octeontx2: add polling based response mbox message Sunil Kumar Kori
2019-11-25 11:35 ` [dpdk-dev] [PATCH 5/5] common/octeontx2: enhancing mbox APIs to get response Sunil Kumar Kori
2019-11-26  6:15 ` [dpdk-dev] [PATCH v2 1/5] drivers/octeontx2: allow experimental symbols Sunil Kumar Kori
2019-11-26 16:21   ` Thomas Monjalon
2019-11-27  8:34     ` [dpdk-dev] [EXT] " Sunil Kumar Kori
2019-11-27  9:42       ` Thomas Monjalon
2019-11-27 10:22   ` [dpdk-dev] [PATCH v2 1/4] eal: add API to check if its interrupt context Sunil Kumar Kori
2019-11-27 10:22     ` Sunil Kumar Kori [this message]
2019-11-27 10:22     ` [dpdk-dev] [PATCH v2 3/4] common/octeontx2: add polling based response mbox message Sunil Kumar Kori
2019-11-27 10:22     ` [dpdk-dev] [PATCH v2 4/4] drivers/octeontx2: enhancing mbox APIs to get response Sunil Kumar Kori
2019-11-28  0:03     ` [dpdk-dev] [PATCH v2 1/4] eal: add API to check if its interrupt context Stephen Hemminger
2019-11-28  8:10       ` [dpdk-dev] [EXT] " Harman Kalra
2019-11-28 16:45         ` Stephen Hemminger
2019-12-04 16:23           ` Harman Kalra
2019-12-16 10:39     ` [dpdk-dev] [PATCH v3 1/2] " Sunil Kumar Kori
2019-12-16 10:39       ` [dpdk-dev] [PATCH v3 2/2] common/octeontx2: add polling based response mbox message Sunil Kumar Kori
2019-12-17  8:02         ` Gavin Hu (Arm Technology China)
2019-12-17 11:14           ` Jerin Jacob
2019-12-18  2:45             ` Gavin Hu
2019-12-17 10:42         ` [dpdk-dev] [PATCH v4 1/2] eal: add API to check if its interrupt context Sunil Kumar Kori
2019-12-17 10:42           ` [dpdk-dev] [PATCH v4 2/2] common/octeontx2: add polling based response mbox message Sunil Kumar Kori
2019-12-17 16:53         ` [dpdk-dev] [PATCH v4 1/2] eal: add API to check if its interrupt context Sunil Kumar Kori
2019-12-17 16:53           ` [dpdk-dev] [PATCH v4 2/2] common/octeontx2: add polling based response mbox message Sunil Kumar Kori
2019-12-18  2:54             ` Gavin Hu
2019-12-18  7:07           ` [dpdk-dev] [PATCH v5 1/2] eal: add API to check if its interrupt context Sunil Kumar Kori
2019-12-18  7:07             ` [dpdk-dev] [PATCH v5 2/2] common/octeontx2: add polling based response mbox message Sunil Kumar Kori
2019-12-20  6:56               ` [dpdk-dev] [PATCH v6 1/2] eal: add API to check if its interrupt context Sunil Kumar Kori
2019-12-20  6:56                 ` [dpdk-dev] [PATCH v6 2/2] common/octeontx2: add polling based response mbox message Sunil Kumar Kori
2020-01-14  8:41                   ` Jerin Jacob
2020-01-14 10:17                     ` Thomas Monjalon
2020-01-14  9:04                   ` [dpdk-dev] [PATCH v7 1/2] eal: add API to check if its interrupt context Sunil Kumar Kori
2020-01-14  9:04                     ` [dpdk-dev] [PATCH v7 2/2] common/octeontx2: add polling based response mbox message Sunil Kumar Kori
2020-01-21  8:37                       ` Sunil Kumar Kori
2020-02-06 15:35                     ` [dpdk-dev] [PATCH v7 1/2] eal: add API to check if its interrupt context David Marchand
2020-01-14  8:37                 ` [dpdk-dev] [PATCH v6 " Jerin Jacob

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191127102222.31940-2-skori@marvell.com \
    --to=skori@marvell.com \
    --cc=dev@dpdk.org \
    --cc=jerinj@marvell.com \
    --cc=ndabilpuram@marvell.com \
    --cc=vattunuru@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).