DPDK patches and discussions
 help / color / Atom feed
* [dpdk-dev] [PATCH] cryptodev: add chacha20-poly1305 aead algorithm
@ 2019-11-29  6:57 Arek Kusztal
  2019-11-29 11:02 ` Trahe, Fiona
  0 siblings, 1 reply; 2+ messages in thread
From: Arek Kusztal @ 2019-11-29  6:57 UTC (permalink / raw)
  To: dev; +Cc: akhil.goyal, fiona.trahe, Arek Kusztal

This patch adds Chacha20-Poly1305 AEAD algorithm to Cryptodev.

Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
---
 doc/guides/cryptodevs/features/default.ini | 13 +++++++------
 doc/guides/rel_notes/release_19_11.rst     |  4 ++++
 lib/librte_cryptodev/rte_crypto_sym.h      |  9 +++++++++
 3 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/doc/guides/cryptodevs/features/default.ini b/doc/guides/cryptodevs/features/default.ini
index b7f9a0a..2a3ff48 100644
--- a/doc/guides/cryptodevs/features/default.ini
+++ b/doc/guides/cryptodevs/features/default.ini
@@ -93,12 +93,13 @@ SHA3_512 HMAC   =
 ; Supported AEAD algorithms of a default crypto driver.
 ;
 [AEAD]
-AES GCM (128) =
-AES GCM (192) =
-AES GCM (256) =
-AES CCM (128) =
-AES CCM (192) =
-AES CCM (256) =
+AES GCM (128)     =
+AES GCM (192)     =
+AES GCM (256)     =
+AES CCM (128)     =
+AES CCM (192)     =
+AES CCM (256)     =
+CHACHA20-POLY1305 =
 ;
 ; Supported Asymmetric algorithms of a default crypto driver.
 ;
diff --git a/doc/guides/rel_notes/release_19_11.rst b/doc/guides/rel_notes/release_19_11.rst
index 48c80e5..d07a396 100644
--- a/doc/guides/rel_notes/release_19_11.rst
+++ b/doc/guides/rel_notes/release_19_11.rst
@@ -315,6 +315,10 @@ New Features
     "--iova-mode=pa" option can be used, IOVA_DC bus iommu scheme can also
     result in IOVA as PA.
 
+* **Added Chacha20-Poly1305 algorithm to Cryptodev API.**
+
+  Chacha20-Poly1305 AEAD algorithm can now be supported in Cryptodev.
+
 
 Removed Items
 -------------
diff --git a/lib/librte_cryptodev/rte_crypto_sym.h b/lib/librte_cryptodev/rte_crypto_sym.h
index ffa038d..bc356f6 100644
--- a/lib/librte_cryptodev/rte_crypto_sym.h
+++ b/lib/librte_cryptodev/rte_crypto_sym.h
@@ -348,6 +348,8 @@ enum rte_crypto_aead_algorithm {
 	/**< AES algorithm in CCM mode. */
 	RTE_CRYPTO_AEAD_AES_GCM,
 	/**< AES algorithm in GCM mode. */
+	RTE_CRYPTO_AEAD_CHACHA20_POLY1305,
+	/**< Chacha20 cipher with poly1305 authenticator */
 	RTE_CRYPTO_AEAD_LIST_END
 };
 
@@ -391,6 +393,11 @@ struct rte_crypto_aead_xform {
 		 * be allocated, even though the length field will
 		 * have a value less than this.
 		 *
+		 * - For Chacha20-Poly1305 it is 96-bit nonce.
+		 * PMD sets initial counter for Poly1305 key generation
+		 * part to 0 and for Chacha20 encryption to 1 as per
+		 * rfc8439 2.8. AEAD construction.
+		 *
 		 * For optimum performance, the data pointed to SHOULD
 		 * be 8-byte aligned.
 		 */
@@ -407,6 +414,8 @@ struct rte_crypto_aead_xform {
 		 *
 		 * - For CCM mode, this is the length of the nonce,
 		 * which can be in the range 7 to 13 inclusive.
+		 *
+		 * - For Chacha20-Poly1305 this field is always 12.
 		 */
 	} iv;	/**< Initialisation vector parameters */
 
-- 
2.1.0


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-29  6:57 [dpdk-dev] [PATCH] cryptodev: add chacha20-poly1305 aead algorithm Arek Kusztal
2019-11-29 11:02 ` Trahe, Fiona

DPDK patches and discussions

Archives are clonable:
	git clone --mirror http://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ http://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev


Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox