From: Qi Zhang <qi.z.zhang@intel.com>
To: qiming.yang@intel.com
Cc: xiaolong.ye@intel.com, dev@dpdk.org,
Qi Zhang <qi.z.zhang@intel.com>,
Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Subject: [dpdk-dev] [PATCH 12/12] net/ice/base: minor code clean
Date: Thu, 5 Dec 2019 20:38:47 +0800 [thread overview]
Message-ID: <20191205123847.39579-13-qi.z.zhang@intel.com> (raw)
In-Reply-To: <20191205123847.39579-1-qi.z.zhang@intel.com>
Couple minor code clean include:
1. Improve debug message format.
2. Add missing macro and comment.
3. Remove unnecessary compile options.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
---
drivers/net/ice/base/ice_adminq_cmd.h | 1 +
drivers/net/ice/base/ice_common.c | 2 +-
drivers/net/ice/base/ice_flex_pipe.c | 8 +++++---
drivers/net/ice/base/ice_type.h | 4 ----
4 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ice/base/ice_adminq_cmd.h b/drivers/net/ice/base/ice_adminq_cmd.h
index e6a1350ba..9a79c7645 100644
--- a/drivers/net/ice/base/ice_adminq_cmd.h
+++ b/drivers/net/ice/base/ice_adminq_cmd.h
@@ -1688,6 +1688,7 @@ struct ice_aqc_nvm {
#define ICE_AQC_NVM_ACTIV_SEL_NVM BIT(3) /* Write Activate/SR Dump only */
#define ICE_AQC_NVM_ACTIV_SEL_OROM BIT(4)
#define ICE_AQC_NVM_ACTIV_SEL_NETLIST BIT(5)
+#define ICE_AQC_NVM_SPECIAL_UPDATE BIT(6)
#define ICE_AQC_NVM_ACTIV_SEL_MASK MAKEMASK(0x7, 3)
#define ICE_AQC_NVM_FLASH_ONLY BIT(7)
__le16 module_typeid;
diff --git a/drivers/net/ice/base/ice_common.c b/drivers/net/ice/base/ice_common.c
index 99ff821ac..8c2e59918 100644
--- a/drivers/net/ice/base/ice_common.c
+++ b/drivers/net/ice/base/ice_common.c
@@ -593,7 +593,7 @@ void ice_print_rollback_msg(struct ice_hw *hw)
SNPRINTF(nvm_str, sizeof(nvm_str), "%x.%02x 0x%x %d.%d.%d", ver_hi,
ver_lo, hw->nvm.eetrack, oem_ver, oem_build, oem_patch);
ice_warn(hw,
- "Firmware rollback mode detected. Current version is NVM: %s, FW: %d.%d. Device may exhibit limited functionality. Refer to the Intel(R) Ethernet Adapters and Devices User Guide for details on firmware rollback mode",
+ "Firmware rollback mode detected. Current version is NVM: %s, FW: %d.%d. Device may exhibit limited functionality. Refer to the Intel(R) Ethernet Adapters and Devices User Guide for details on firmware rollback mode\n",
nvm_str, hw->fw_maj_ver, hw->fw_min_ver);
}
diff --git a/drivers/net/ice/base/ice_flex_pipe.c b/drivers/net/ice/base/ice_flex_pipe.c
index 28ac3aa75..1598efd67 100644
--- a/drivers/net/ice/base/ice_flex_pipe.c
+++ b/drivers/net/ice/base/ice_flex_pipe.c
@@ -3069,7 +3069,8 @@ ice_free_prof_mask(struct ice_hw *hw, enum ice_block blk, u16 mask_idx)
hw->blk[blk].masks.masks[mask_idx].idx = 0;
/* update mask as unused entry */
- ice_debug(hw, ICE_DBG_PKG, "Free mask, blk %d, mask %d", blk, mask_idx);
+ ice_debug(hw, ICE_DBG_PKG, "Free mask, blk %d, mask %d\n", blk,
+ mask_idx);
ice_write_prof_mask_reg(hw, blk, mask_idx, 0, 0);
exit_ice_free_prof_mask:
@@ -4173,7 +4174,7 @@ ice_upd_prof_hw(struct ice_hw *hw, enum ice_block blk,
/* update package */
status = ice_update_pkg(hw, ice_pkg_buf(b), 1);
if (status == ICE_ERR_AQ_ERROR)
- ice_debug(hw, ICE_DBG_INIT, "Unable to update HW profile.");
+ ice_debug(hw, ICE_DBG_INIT, "Unable to update HW profile\n");
error_tmp:
ice_pkg_buf_free(hw, b);
@@ -5227,7 +5228,7 @@ ice_adj_prof_priorities(struct ice_hw *hw, enum ice_block blk, u16 vsig,
* @blk: hardware block
* @vsig: the VSIG to which this profile is to be added
* @hdl: the profile handle indicating the profile to add
- * @rev: true to reverse the additions to the list
+ * @rev: true to add entries to the end of the list
* @chg: the change list
*/
static enum ice_status
@@ -5379,6 +5380,7 @@ ice_create_prof_id_vsig(struct ice_hw *hw, enum ice_block blk, u16 vsi, u64 hdl,
* @blk: hardware block
* @vsi: the initial VSI that will be in VSIG
* @lst: the list of profile that will be added to the VSIG
+ * @new_vsig: return of new vsig
* @chg: the change list
*/
static enum ice_status
diff --git a/drivers/net/ice/base/ice_type.h b/drivers/net/ice/base/ice_type.h
index a8e4229a1..9773a549f 100644
--- a/drivers/net/ice/base/ice_type.h
+++ b/drivers/net/ice/base/ice_type.h
@@ -14,9 +14,7 @@
#define BITS_PER_BYTE 8
-#ifndef _FORCE_
#define _FORCE_
-#endif
#define ICE_BYTES_PER_WORD 2
#define ICE_BYTES_PER_DWORD 4
@@ -130,9 +128,7 @@ static inline u32 ice_round_to_num(u32 N, u32 R)
#define ICE_DBG_USER BIT_ULL(31)
#define ICE_DBG_ALL 0xFFFFFFFFFFFFFFFFULL
-#ifndef __ALWAYS_UNUSED
#define __ALWAYS_UNUSED
-#endif
#define IS_ETHER_ADDR_EQUAL(addr1, addr2) \
(((bool)((((u16 *)(addr1))[0] == ((u16 *)(addr2))[0]))) && \
--
2.13.6
next prev parent reply other threads:[~2019-12-05 12:37 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-05 12:38 [dpdk-dev] [PATCH 00/12] base code update Qi Zhang
2019-12-05 12:38 ` [dpdk-dev] [PATCH 01/12] net/ice/base: whitelist register for NVM access Qi Zhang
2019-12-05 12:38 ` [dpdk-dev] [PATCH 02/12] net/ice/base: support MAC/VLAN with TCP/UDP in switch Qi Zhang
2019-12-05 12:38 ` [dpdk-dev] [PATCH 03/12] net/ice/base: do not wait for PE unit to load Qi Zhang
2019-12-05 12:38 ` [dpdk-dev] [PATCH 04/12] net/ice/base: cleanup format of static const declarations Qi Zhang
2019-12-05 12:38 ` [dpdk-dev] [PATCH 05/12] net/ice/base: flexbytes should match on header data Qi Zhang
2019-12-05 12:38 ` [dpdk-dev] [PATCH 06/12] net/ice/base: enable clearing of the HW tables Qi Zhang
2019-12-05 12:38 ` [dpdk-dev] [PATCH 07/12] net/ice/base: fix loop limit Qi Zhang
2019-12-05 12:38 ` [dpdk-dev] [PATCH 08/12] net/ice/base: increase PF reset wait timeout Qi Zhang
2019-12-05 12:38 ` [dpdk-dev] [PATCH 09/12] net/ice/base: change fdir desc preparation Qi Zhang
2019-12-05 12:38 ` [dpdk-dev] [PATCH 10/12] net/ice/base: support add MAC rules on specific port Qi Zhang
2019-12-05 12:38 ` [dpdk-dev] [PATCH 11/12] net/ice: support 1/10G device IDs Qi Zhang
2019-12-05 12:38 ` Qi Zhang [this message]
2020-01-02 6:00 ` [dpdk-dev] [PATCH 00/12] base code update Yang, Qiming
2020-01-06 3:38 ` [dpdk-dev] [PATCH v2 " Qi Zhang
2020-01-06 3:38 ` [dpdk-dev] [PATCH v2 01/12] net/ice/base: whitelist register for NVM access Qi Zhang
2020-01-06 3:38 ` [dpdk-dev] [PATCH v2 02/12] net/ice/base: support MAC/VLAN with TCP/UDP in switch Qi Zhang
2020-01-06 4:00 ` Patil, Kiran
2020-01-06 3:38 ` [dpdk-dev] [PATCH v2 03/12] net/ice/base: do not wait for PE unit to load Qi Zhang
2020-01-06 3:38 ` [dpdk-dev] [PATCH v2 04/12] net/ice/base: cleanup format of static const declarations Qi Zhang
2020-01-06 3:38 ` [dpdk-dev] [PATCH v2 05/12] net/ice/base: flexbytes should match on header data Qi Zhang
2020-01-06 3:38 ` [dpdk-dev] [PATCH v2 06/12] net/ice/base: enable clearing of the HW tables Qi Zhang
2020-01-06 3:38 ` [dpdk-dev] [PATCH v2 07/12] net/ice/base: fix loop limit Qi Zhang
2020-01-06 3:38 ` [dpdk-dev] [PATCH v2 08/12] net/ice/base: increase PF reset wait timeout Qi Zhang
2020-01-06 3:38 ` [dpdk-dev] [PATCH v2 09/12] net/ice/base: change fdir desc preparation Qi Zhang
2020-01-06 4:01 ` Patil, Kiran
2020-01-06 3:38 ` [dpdk-dev] [PATCH v2 10/12] net/ice/base: support add MAC rules on specific port Qi Zhang
2020-01-06 3:38 ` [dpdk-dev] [PATCH v2 11/12] net/ice: support 1/10G device IDs Qi Zhang
2020-01-06 3:38 ` [dpdk-dev] [PATCH v2 12/12] net/ice/base: minor code clean Qi Zhang
2020-01-09 4:38 ` [dpdk-dev] [PATCH v2 00/12] base code update Ye Xiaolong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191205123847.39579-13-qi.z.zhang@intel.com \
--to=qi.z.zhang@intel.com \
--cc=dev@dpdk.org \
--cc=paul.m.stillwell.jr@intel.com \
--cc=qiming.yang@intel.com \
--cc=xiaolong.ye@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).