From: "Wei Hu (Xavier)" <huwei013@chinasoftinc.com>
To: <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v2 2/9] net/hns3: get link state change through mailbox
Date: Sat, 14 Dec 2019 18:29:27 +0800 [thread overview]
Message-ID: <20191214102934.50491-3-huwei013@chinasoftinc.com> (raw)
In-Reply-To: <20191214102934.50491-1-huwei013@chinasoftinc.com>
From: Hongbo Zheng <zhenghongbo3@huawei.com>
Currently, firmware adds the function of sending message to PF driver
through mailbox when the link status is changed, hns3 PMD driver can
usually recognize link state change faster through the message.
And in some extreme cases, this way is not faster than existing method
regularly updating link status by issing the command every second in PF
driver, because of the parallel processing of mailbox and command messages
in firmware. So we reserve updating link status using timers in PF driver,
and add querying link status by issuing command to the firmware in
'.link_update' ops implementation function named hns3_dev_link_update to
solve the out of date link status.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
---
v1 -> v2:
1.Add querying link status by issuing command to the firmware
in '.link_update' ops implementation function named
hns3_dev_link_update to solve the out of date link status.
---
drivers/net/hns3/hns3_ethdev.c | 14 +++++++++++--
drivers/net/hns3/hns3_ethdev.h | 1 +
drivers/net/hns3/hns3_mbx.c | 37 ++++++++++++++++++++++++++++++++++
drivers/net/hns3/hns3_mbx.h | 8 ++++++++
4 files changed, 58 insertions(+), 2 deletions(-)
diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c
index bf0ab458f..5795b3b34 100644
--- a/drivers/net/hns3/hns3_ethdev.c
+++ b/drivers/net/hns3/hns3_ethdev.c
@@ -77,6 +77,7 @@ static enum hns3_reset_level hns3_get_reset_level(struct hns3_adapter *hns,
static int hns3_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
static int hns3_vlan_pvid_configure(struct hns3_adapter *hns, uint16_t pvid,
int on);
+static int hns3_update_speed_duplex(struct rte_eth_dev *eth_dev);
static void
hns3_pf_disable_irq0(struct hns3_hw *hw)
@@ -218,6 +219,8 @@ hns3_interrupt_handler(void *param)
hns3_schedule_reset(hns);
} else if (event_cause == HNS3_VECTOR0_EVENT_RST)
hns3_schedule_reset(hns);
+ else if (event_cause == HNS3_VECTOR0_EVENT_MBX)
+ hns3_dev_handle_mbx_msg(hw);
else
hns3_err(hw, "Received unknown event");
@@ -2302,6 +2305,11 @@ hns3_dev_link_update(struct rte_eth_dev *eth_dev,
struct hns3_mac *mac = &hw->mac;
struct rte_eth_link new_link;
+ if (!hns3_is_reset_pending(hns)) {
+ hns3_update_speed_duplex(eth_dev);
+ hns3_update_link_status(hw);
+ }
+
memset(&new_link, 0, sizeof(new_link));
switch (mac->link_speed) {
case ETH_SPEED_NUM_10M:
@@ -3806,14 +3814,16 @@ hns3_get_mac_link_status(struct hns3_hw *hw)
return !!link_status;
}
-static void
+void
hns3_update_link_status(struct hns3_hw *hw)
{
int state;
state = hns3_get_mac_link_status(hw);
- if (state != hw->mac.link_status)
+ if (state != hw->mac.link_status) {
hw->mac.link_status = state;
+ hns3_warn(hw, "Link status change to %s!", state ? "up" : "down");
+ }
}
static void
diff --git a/drivers/net/hns3/hns3_ethdev.h b/drivers/net/hns3/hns3_ethdev.h
index e9a3fe410..004cd75a9 100644
--- a/drivers/net/hns3/hns3_ethdev.h
+++ b/drivers/net/hns3/hns3_ethdev.h
@@ -631,6 +631,7 @@ int hns3_dev_filter_ctrl(struct rte_eth_dev *dev,
enum rte_filter_op filter_op, void *arg);
bool hns3_is_reset_pending(struct hns3_adapter *hns);
bool hns3vf_is_reset_pending(struct hns3_adapter *hns);
+void hns3_update_link_status(struct hns3_hw *hw);
static inline bool
is_reset_pending(struct hns3_adapter *hns)
diff --git a/drivers/net/hns3/hns3_mbx.c b/drivers/net/hns3/hns3_mbx.c
index c1647af4b..26807bc4b 100644
--- a/drivers/net/hns3/hns3_mbx.c
+++ b/drivers/net/hns3/hns3_mbx.c
@@ -282,6 +282,40 @@ hns3_update_resp_position(struct hns3_hw *hw, uint32_t resp_msg)
resp->tail = tail;
}
+static void
+hns3_link_fail_parse(struct hns3_hw *hw, uint8_t link_fail_code)
+{
+ switch (link_fail_code) {
+ case HNS3_MBX_LF_NORMAL:
+ break;
+ case HNS3_MBX_LF_REF_CLOCK_LOST:
+ hns3_warn(hw, "Reference clock lost!");
+ break;
+ case HNS3_MBX_LF_XSFP_TX_DISABLE:
+ hns3_warn(hw, "SFP tx is disabled!");
+ break;
+ case HNS3_MBX_LF_XSFP_ABSENT:
+ hns3_warn(hw, "SFP is absent!");
+ break;
+ default:
+ hns3_warn(hw, "Unknown fail code:%u!", link_fail_code);
+ break;
+ }
+}
+
+static void
+hns3_handle_link_change_event(struct hns3_hw *hw,
+ struct hns3_mbx_pf_to_vf_cmd *req)
+{
+#define LINK_STATUS_OFFSET 1
+#define LINK_FAIL_CODE_OFFSET 2
+
+ if (!req->msg[LINK_STATUS_OFFSET])
+ hns3_link_fail_parse(hw, req->msg[LINK_FAIL_CODE_OFFSET]);
+
+ hns3_update_link_status(hw);
+}
+
void
hns3_dev_handle_mbx_msg(struct hns3_hw *hw)
{
@@ -335,6 +369,9 @@ hns3_dev_handle_mbx_msg(struct hns3_hw *hw)
hns3_mbx_handler(hw);
break;
+ case HNS3_MBX_PUSH_LINK_STATUS:
+ hns3_handle_link_change_event(hw, req);
+ break;
default:
hns3_err(hw,
"VF received unsupported(%d) mbx msg from PF",
diff --git a/drivers/net/hns3/hns3_mbx.h b/drivers/net/hns3/hns3_mbx.h
index d1a6bfead..3722c8760 100644
--- a/drivers/net/hns3/hns3_mbx.h
+++ b/drivers/net/hns3/hns3_mbx.h
@@ -41,6 +41,7 @@ enum HNS3_MBX_OPCODE {
HNS3_MBX_GET_QID_IN_PF, /* (VF -> PF) get queue id in pf */
HNS3_MBX_HANDLE_VF_TBL = 38, /* (VF -> PF) store/clear hw cfg tbl */
+ HNS3_MBX_PUSH_LINK_STATUS = 201, /* (IMP -> PF) get port link status */
};
/* below are per-VF mac-vlan subcodes */
@@ -64,6 +65,13 @@ enum hns3_mbx_tbl_cfg_subcode {
HNS3_MBX_VPORT_LIST_CLEAR = 0,
};
+enum hns3_mbx_link_fail_subcode {
+ HNS3_MBX_LF_NORMAL = 0,
+ HNS3_MBX_LF_REF_CLOCK_LOST,
+ HNS3_MBX_LF_XSFP_TX_DISABLE,
+ HNS3_MBX_LF_XSFP_ABSENT,
+};
+
#define HNS3_MBX_MAX_MSG_SIZE 16
#define HNS3_MBX_MAX_RESP_DATA_SIZE 8
#define HNS3_MBX_RING_MAP_BASIC_MSG_NUM 3
--
2.23.0
next prev parent reply other threads:[~2019-12-14 10:30 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-14 10:29 [dpdk-dev] [PATCH v2 0/9] updates for hns3 PMD driver Wei Hu (Xavier)
2019-12-14 10:29 ` [dpdk-dev] [PATCH v2 1/9] net/hns3: support Rx interrupt Wei Hu (Xavier)
2019-12-14 10:29 ` Wei Hu (Xavier) [this message]
2019-12-14 10:29 ` [dpdk-dev] [PATCH v2 3/9] net/hns3: modify the return value of enable msix Wei Hu (Xavier)
2019-12-14 10:29 ` [dpdk-dev] [PATCH v2 4/9] net/hns3: modify custom macro Wei Hu (Xavier)
2019-12-14 10:29 ` [dpdk-dev] [PATCH v2 5/9] net/hns3: optimize RSS's default algorithm Wei Hu (Xavier)
2019-12-14 10:29 ` [dpdk-dev] [PATCH v2 6/9] net/hns3: remove the redundant function call Wei Hu (Xavier)
2019-12-14 10:29 ` [dpdk-dev] [PATCH v2 7/9] net/hns3: remove the redundant variable initialization Wei Hu (Xavier)
2019-12-14 10:29 ` [dpdk-dev] [PATCH v2 8/9] net/hns3: remove the unnecessary assignment Wei Hu (Xavier)
2019-12-14 10:29 ` [dpdk-dev] [PATCH v2 9/9] net/hns3: remove the unused macros Wei Hu (Xavier)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191214102934.50491-3-huwei013@chinasoftinc.com \
--to=huwei013@chinasoftinc.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).