DPDK patches and discussions
 help / color / Atom feed
From: Li Feng <fengli@smartx.com>
To: Maxime Coquelin <maxime.coquelin@redhat.com>,
	Tiwei Bie <tiwei.bie@intel.com>,
	Zhihong Wang <zhihong.wang@intel.com>
Cc: dev@dpdk.org, kyle@smartx.com, Li Feng <fengli@smartx.com>
Subject: [dpdk-dev] [PATCH v5] vhost: add config change slave msg support
Date: Fri, 20 Dec 2019 16:22:55 +0800
Message-ID: <20191220082256.26490-1-fengli@smartx.com> (raw)
In-Reply-To: <20191202145735.9763-1-fengli@smartx.com>

This msg is used to notify qemu that should get the config of backend.

For example, vhost-user-blk uses this msg to notify guest os the
capacity of backend has changed.

The need_reply flag is not mandatory because it will block the sender
thread and master process will send get_config message to fetch the
configuration, this need an extra thread to process the vhost message.

Signed-off-by: Li Feng <fengli@smartx.com>
---
v5:
* Fix code style.

v4:
* Fix type and code style.
* Add need_reply support.

v3:
* Move the declare to rte_vhost.h
* Add the symbol in rte_vhost_version.map

v2:
* Fix a little log typo.

 lib/librte_vhost/rte_vhost.h           | 15 ++++++++++++++
 lib/librte_vhost/rte_vhost_version.map |  1 +
 lib/librte_vhost/vhost_user.c          | 36 ++++++++++++++++++++++++++++++++++
 lib/librte_vhost/vhost_user.h          |  1 +
 4 files changed, 53 insertions(+)

diff --git a/lib/librte_vhost/rte_vhost.h b/lib/librte_vhost/rte_vhost.h
index 7b5dc87c2..c7b619ae0 100644
--- a/lib/librte_vhost/rte_vhost.h
+++ b/lib/librte_vhost/rte_vhost.h
@@ -10,6 +10,7 @@
  * Interface to vhost-user
  */
 
+#include <stdbool.h>
 #include <stdint.h>
 #include <sys/eventfd.h>
 
@@ -977,6 +978,20 @@ __rte_experimental
 int
 rte_vhost_get_vdpa_device_id(int vid);
 
+/**
+ * Notify the guest that should get virtio configuration space from backend.
+ *
+ * @param vid
+ *  vhost device ID
+ * @param need_reply
+ *  wait for the master response the status of this operation
+ * @return
+ *  0 on success, < 0 on failure
+ */
+__rte_experimental
+int
+rte_vhost_slave_config_change(int vid, bool need_reply);
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/lib/librte_vhost/rte_vhost_version.map b/lib/librte_vhost/rte_vhost_version.map
index c512377fe..051d08c12 100644
--- a/lib/librte_vhost/rte_vhost_version.map
+++ b/lib/librte_vhost/rte_vhost_version.map
@@ -65,4 +65,5 @@ EXPERIMENTAL {
 	rte_vhost_clr_inflight_desc_packed;
 	rte_vhost_get_vhost_ring_inflight;
 	rte_vhost_get_vring_base_from_inflight;
+	rte_vhost_slave_config_change;
 };
diff --git a/lib/librte_vhost/vhost_user.c b/lib/librte_vhost/vhost_user.c
index 0cfb8b792..defd82a19 100644
--- a/lib/librte_vhost/vhost_user.c
+++ b/lib/librte_vhost/vhost_user.c
@@ -2840,6 +2840,42 @@ vhost_user_iotlb_miss(struct virtio_net *dev, uint64_t iova, uint8_t perm)
 	return 0;
 }
 
+static int
+vhost_user_slave_config_change(struct virtio_net *dev, bool need_reply)
+{
+	int ret;
+	struct VhostUserMsg msg = {
+		.request.slave = VHOST_USER_SLAVE_CONFIG_CHANGE_MSG,
+		.flags = VHOST_USER_VERSION,
+		.size = 0,
+	};
+
+	if (need_reply)
+		msg.flags |= VHOST_USER_NEED_REPLY;
+
+	ret = send_vhost_slave_message(dev, &msg);
+	if (ret < 0) {
+		RTE_LOG(ERR, VHOST_CONFIG,
+			"Failed to send config change (%d)\n",
+			ret);
+		return ret;
+	}
+
+	return process_slave_message_reply(dev, &msg);
+}
+
+int
+rte_vhost_slave_config_change(int vid, bool need_reply)
+{
+	struct virtio_net *dev;
+
+	dev = get_device(vid);
+	if (!dev)
+		return -ENODEV;
+
+	return vhost_user_slave_config_change(dev, need_reply);
+}
+
 static int vhost_user_slave_set_vring_host_notifier(struct virtio_net *dev,
 						    int index, int fd,
 						    uint64_t offset,
diff --git a/lib/librte_vhost/vhost_user.h b/lib/librte_vhost/vhost_user.h
index 6563f7315..86c364a93 100644
--- a/lib/librte_vhost/vhost_user.h
+++ b/lib/librte_vhost/vhost_user.h
@@ -62,6 +62,7 @@ typedef enum VhostUserRequest {
 typedef enum VhostUserSlaveRequest {
 	VHOST_USER_SLAVE_NONE = 0,
 	VHOST_USER_SLAVE_IOTLB_MSG = 1,
+	VHOST_USER_SLAVE_CONFIG_CHANGE_MSG = 2,
 	VHOST_USER_SLAVE_VRING_HOST_NOTIFIER_MSG = 3,
 	VHOST_USER_SLAVE_MAX
 } VhostUserSlaveRequest;
-- 
2.11.0


-- 
The SmartX email address is only for business purpose. Any sent message 
that is not related to the business is not authorized or permitted by 
SmartX.
本邮箱为北京志凌海纳科技有限公司(SmartX)工作邮箱. 如本邮箱发出的邮件与工作无关,该邮件未得到本公司任何的明示或默示的授权.



  parent reply index

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-02 14:57 [dpdk-dev] [PATCH] " Li Feng
2019-12-04  5:13 ` [dpdk-dev] [PATCH v2] " Li Feng
2019-12-04  9:30   ` Tiwei Bie
2019-12-04  9:43     ` Li Feng
2019-12-05  2:07       ` Tiwei Bie
2019-12-05  4:01         ` Li Feng
2019-12-05  4:57           ` Tiwei Bie
2019-12-05  5:38 ` [dpdk-dev] [PATCH v3] " Li Feng
2019-12-11  2:58   ` Li Feng
2019-12-16  5:06   ` Tiwei Bie
2019-12-18  6:34     ` Li Feng
2019-12-19  8:54 ` [dpdk-dev] [PATCH v4] " Li Feng
2019-12-20  8:04   ` Tiwei Bie
2019-12-20  8:22 ` Li Feng [this message]
2020-01-14 14:57   ` [dpdk-dev] [PATCH v5] " Maxime Coquelin
2020-01-15 11:18   ` Maxime Coquelin

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191220082256.26490-1-fengli@smartx.com \
    --to=fengli@smartx.com \
    --cc=dev@dpdk.org \
    --cc=kyle@smartx.com \
    --cc=maxime.coquelin@redhat.com \
    --cc=tiwei.bie@intel.com \
    --cc=zhihong.wang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

Archives are clonable:
	git clone --mirror http://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ http://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev


Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox