From: Adam Dybkowski <adamx.dybkowski@intel.com>
To: dev@dpdk.org, fiona.trahe@intel.com, akhil.goyal@nxp.com,
declan.doherty@intel.com
Cc: Adam Dybkowski <adamx.dybkowski@intel.com>
Subject: [dpdk-dev] [PATCH] test/crypto: add operation status checks
Date: Fri, 20 Dec 2019 12:50:04 +0100 [thread overview]
Message-ID: <20191220115004.2713-1-adamx.dybkowski@intel.com> (raw)
This patch adds checking of the symmetric crypto operation status
that was silently skipped before. It fixes the wireless algorithms
session creation (SNOW3G, KASUMI, ZUC) and passing of the digest
data for the verification by PMD.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
---
app/test/test_cryptodev.c | 96 +++++++++++++++++++++------------------
1 file changed, 52 insertions(+), 44 deletions(-)
diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
index 1b561456d..241a1f97a 100644
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -143,7 +143,7 @@ static struct rte_crypto_op *
process_crypto_request(uint8_t dev_id, struct rte_crypto_op *op)
{
if (rte_cryptodev_enqueue_burst(dev_id, 0, &op, 1) != 1) {
- printf("Error sending packet for encryption");
+ printf("Error sending packet for encryption\n");
return NULL;
}
@@ -152,6 +152,11 @@ process_crypto_request(uint8_t dev_id, struct rte_crypto_op *op)
while (rte_cryptodev_dequeue_burst(dev_id, 0, &op, 1) == 0)
rte_pause();
+ if (op->status != RTE_CRYPTO_OP_STATUS_SUCCESS) {
+ RTE_LOG(DEBUG, USER1, "Operation status %d\n", op->status);
+ return NULL;
+ }
+
return op;
}
@@ -2823,9 +2828,18 @@ create_wireless_algo_auth_cipher_session(uint8_t dev_id,
ut_params->sess = rte_cryptodev_sym_session_create(
ts_params->session_mpool);
- status = rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
- &ut_params->auth_xform,
- ts_params->session_priv_mpool);
+ if (cipher_op == RTE_CRYPTO_CIPHER_OP_DECRYPT) {
+ ut_params->auth_xform.next = NULL;
+ ut_params->cipher_xform.next = &ut_params->auth_xform;
+ status = rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
+ &ut_params->cipher_xform,
+ ts_params->session_priv_mpool);
+
+ } else
+ status = rte_cryptodev_sym_session_init(dev_id, ut_params->sess,
+ &ut_params->auth_xform,
+ ts_params->session_priv_mpool);
+
TEST_ASSERT_EQUAL(status, 0, "session init failed");
TEST_ASSERT_NOT_NULL(ut_params->sess, "Session creation failed");
@@ -3018,13 +3032,14 @@ create_wireless_algo_cipher_hash_operation(const uint8_t *auth_tag,
}
static int
-create_wireless_algo_auth_cipher_operation(unsigned int auth_tag_len,
+create_wireless_algo_auth_cipher_operation(
+ const uint8_t *auth_tag, unsigned int auth_tag_len,
const uint8_t *cipher_iv, uint8_t cipher_iv_len,
const uint8_t *auth_iv, uint8_t auth_iv_len,
unsigned int data_pad_len,
unsigned int cipher_len, unsigned int cipher_offset,
unsigned int auth_len, unsigned int auth_offset,
- uint8_t op_mode, uint8_t do_sgl)
+ uint8_t op_mode, uint8_t do_sgl, uint8_t verify)
{
struct crypto_testsuite_params *ts_params = &testsuite_params;
struct crypto_unittest_params *ut_params = &unittest_params;
@@ -3081,6 +3096,10 @@ create_wireless_algo_auth_cipher_operation(unsigned int auth_tag_len,
}
}
+ /* Copy digest for the verification */
+ if (verify)
+ memcpy(sym_op->auth.digest.data, auth_tag, auth_tag_len);
+
/* Copy cipher and auth IVs at the end of the crypto operation */
uint8_t *iv_ptr = rte_crypto_op_ctod_offset(
ut_params->op, uint8_t *, IV_OFFSET);
@@ -4643,7 +4662,7 @@ test_snow3g_auth_cipher(const struct snow3g_test_data *tdata,
/* Create SNOW 3G operation */
retval = create_wireless_algo_auth_cipher_operation(
- tdata->digest.len,
+ tdata->digest.data, tdata->digest.len,
tdata->cipher_iv.data, tdata->cipher_iv.len,
tdata->auth_iv.data, tdata->auth_iv.len,
(tdata->digest.offset_bytes == 0 ?
@@ -4653,7 +4672,7 @@ test_snow3g_auth_cipher(const struct snow3g_test_data *tdata,
tdata->cipher.offset_bits,
tdata->validAuthLenInBits.len,
tdata->auth.offset_bits,
- op_mode, 0);
+ op_mode, 0, verify);
if (retval < 0)
return retval;
@@ -4819,7 +4838,7 @@ test_snow3g_auth_cipher_sgl(const struct snow3g_test_data *tdata,
/* Create SNOW 3G operation */
retval = create_wireless_algo_auth_cipher_operation(
- tdata->digest.len,
+ tdata->digest.data, tdata->digest.len,
tdata->cipher_iv.data, tdata->cipher_iv.len,
tdata->auth_iv.data, tdata->auth_iv.len,
(tdata->digest.offset_bytes == 0 ?
@@ -4829,7 +4848,7 @@ test_snow3g_auth_cipher_sgl(const struct snow3g_test_data *tdata,
tdata->cipher.offset_bits,
tdata->validAuthLenInBits.len,
tdata->auth.offset_bits,
- op_mode, 1);
+ op_mode, 1, verify);
if (retval < 0)
return retval;
@@ -4988,7 +5007,7 @@ test_kasumi_auth_cipher(const struct kasumi_test_data *tdata,
/* Create KASUMI operation */
retval = create_wireless_algo_auth_cipher_operation(
- tdata->digest.len,
+ tdata->digest.data, tdata->digest.len,
tdata->cipher_iv.data, tdata->cipher_iv.len,
NULL, 0,
(tdata->digest.offset_bytes == 0 ?
@@ -4998,7 +5017,7 @@ test_kasumi_auth_cipher(const struct kasumi_test_data *tdata,
tdata->validCipherOffsetInBits.len,
tdata->validAuthLenInBits.len,
0,
- op_mode, 0);
+ op_mode, 0, verify);
if (retval < 0)
return retval;
@@ -5165,7 +5184,7 @@ test_kasumi_auth_cipher_sgl(const struct kasumi_test_data *tdata,
/* Create KASUMI operation */
retval = create_wireless_algo_auth_cipher_operation(
- tdata->digest.len,
+ tdata->digest.data, tdata->digest.len,
tdata->cipher_iv.data, tdata->cipher_iv.len,
NULL, 0,
(tdata->digest.offset_bytes == 0 ?
@@ -5175,7 +5194,7 @@ test_kasumi_auth_cipher_sgl(const struct kasumi_test_data *tdata,
tdata->validCipherOffsetInBits.len,
tdata->validAuthLenInBits.len,
0,
- op_mode, 1);
+ op_mode, 1, verify);
if (retval < 0)
return retval;
@@ -5666,7 +5685,7 @@ test_zuc_auth_cipher(const struct wireless_test_data *tdata,
/* Create ZUC operation */
retval = create_wireless_algo_auth_cipher_operation(
- tdata->digest.len,
+ tdata->digest.data, tdata->digest.len,
tdata->cipher_iv.data, tdata->cipher_iv.len,
tdata->auth_iv.data, tdata->auth_iv.len,
(tdata->digest.offset_bytes == 0 ?
@@ -5676,7 +5695,7 @@ test_zuc_auth_cipher(const struct wireless_test_data *tdata,
tdata->validCipherOffsetInBits.len,
tdata->validAuthLenInBits.len,
0,
- op_mode, 0);
+ op_mode, 0, verify);
if (retval < 0)
return retval;
@@ -5852,7 +5871,7 @@ test_zuc_auth_cipher_sgl(const struct wireless_test_data *tdata,
/* Create ZUC operation */
retval = create_wireless_algo_auth_cipher_operation(
- tdata->digest.len,
+ tdata->digest.data, tdata->digest.len,
tdata->cipher_iv.data, tdata->cipher_iv.len,
NULL, 0,
(tdata->digest.offset_bytes == 0 ?
@@ -5862,7 +5881,7 @@ test_zuc_auth_cipher_sgl(const struct wireless_test_data *tdata,
tdata->validCipherOffsetInBits.len,
tdata->validAuthLenInBits.len,
0,
- op_mode, 1);
+ op_mode, 1, verify);
if (retval < 0)
return retval;
@@ -6643,7 +6662,7 @@ test_mixed_auth_cipher(const struct mixed_cipher_auth_test_data *tdata,
/* Create the operation */
retval = create_wireless_algo_auth_cipher_operation(
- tdata->digest_enc.len,
+ tdata->digest_enc.data, tdata->digest_enc.len,
tdata->cipher_iv.data, tdata->cipher_iv.len,
tdata->auth_iv.data, tdata->auth_iv.len,
(tdata->digest_enc.offset == 0 ?
@@ -6653,7 +6672,7 @@ test_mixed_auth_cipher(const struct mixed_cipher_auth_test_data *tdata,
tdata->cipher.offset_bits,
tdata->validAuthLen.len_bits,
tdata->auth.offset_bits,
- op_mode, 0);
+ op_mode, 0, verify);
if (retval < 0)
return retval;
@@ -6827,7 +6846,7 @@ test_mixed_auth_cipher_sgl(const struct mixed_cipher_auth_test_data *tdata,
/* Create the operation */
retval = create_wireless_algo_auth_cipher_operation(
- tdata->digest_enc.len,
+ tdata->digest_enc.data, tdata->digest_enc.len,
tdata->cipher_iv.data, tdata->cipher_iv.len,
tdata->auth_iv.data, tdata->auth_iv.len,
(tdata->digest_enc.offset == 0 ?
@@ -6837,7 +6856,7 @@ test_mixed_auth_cipher_sgl(const struct mixed_cipher_auth_test_data *tdata,
tdata->cipher.offset_bits,
tdata->validAuthLen.len_bits,
tdata->auth.offset_bits,
- op_mode, 1);
+ op_mode, 1, verify);
if (retval < 0)
return retval;
@@ -10818,13 +10837,8 @@ test_authentication_verify_fail_when_data_corruption(
ut_params->op = process_crypto_request(ts_params->valid_devs[0],
ut_params->op);
- TEST_ASSERT_NOT_NULL(ut_params->op, "failed crypto process");
- TEST_ASSERT_NOT_EQUAL(ut_params->op->status,
- RTE_CRYPTO_OP_STATUS_SUCCESS,
- "authentication not failed");
- ut_params->obuf = ut_params->op->sym->m_src;
- TEST_ASSERT_NOT_NULL(ut_params->obuf, "failed to retrieve obuf");
+ TEST_ASSERT_NULL(ut_params->op, "authentication not failed");
return 0;
}
@@ -10879,13 +10893,8 @@ test_authentication_verify_GMAC_fail_when_corruption(
ut_params->op = process_crypto_request(ts_params->valid_devs[0],
ut_params->op);
- TEST_ASSERT_NOT_NULL(ut_params->op, "failed crypto process");
- TEST_ASSERT_NOT_EQUAL(ut_params->op->status,
- RTE_CRYPTO_OP_STATUS_SUCCESS,
- "authentication not failed");
- ut_params->obuf = ut_params->op->sym->m_src;
- TEST_ASSERT_NOT_NULL(ut_params->obuf, "failed to retrieve obuf");
+ TEST_ASSERT_NULL(ut_params->op, "authentication not failed");
return 0;
}
@@ -10940,13 +10949,7 @@ test_authenticated_decryption_fail_when_corruption(
ut_params->op = process_crypto_request(ts_params->valid_devs[0],
ut_params->op);
- TEST_ASSERT_NOT_NULL(ut_params->op, "failed crypto process");
- TEST_ASSERT_NOT_EQUAL(ut_params->op->status,
- RTE_CRYPTO_OP_STATUS_SUCCESS,
- "authentication not failed");
-
- ut_params->obuf = ut_params->op->sym->m_src;
- TEST_ASSERT_NOT_NULL(ut_params->obuf, "failed to retrieve obuf");
+ TEST_ASSERT_NULL(ut_params->op, "authentication not failed");
return 0;
}
@@ -11149,6 +11152,7 @@ create_aead_operation_SGL(enum rte_crypto_aead_operation op,
const unsigned int auth_tag_len = tdata->auth_tag.len;
const unsigned int iv_len = tdata->iv.len;
unsigned int aad_len = tdata->aad.len;
+ unsigned int aad_len_pad = 0;
/* Generate Crypto op data structure */
ut_params->op = rte_crypto_op_alloc(ts_params->op_mpool,
@@ -11203,8 +11207,10 @@ create_aead_operation_SGL(enum rte_crypto_aead_operation op,
rte_memcpy(iv_ptr, tdata->iv.data, iv_len);
+ aad_len_pad = RTE_ALIGN_CEIL(aad_len, 16);
+
sym_op->aead.aad.data = (uint8_t *)rte_pktmbuf_prepend(
- ut_params->ibuf, aad_len);
+ ut_params->ibuf, aad_len_pad);
TEST_ASSERT_NOT_NULL(sym_op->aead.aad.data,
"no room to prepend aad");
sym_op->aead.aad.phys_addr = rte_pktmbuf_iova(
@@ -11219,7 +11225,7 @@ create_aead_operation_SGL(enum rte_crypto_aead_operation op,
}
sym_op->aead.data.length = tdata->plaintext.len;
- sym_op->aead.data.offset = aad_len;
+ sym_op->aead.data.offset = aad_len_pad;
return 0;
}
@@ -11252,7 +11258,7 @@ test_authenticated_encryption_SGL(const struct aead_test_data *tdata,
int ecx = 0;
void *digest_mem = NULL;
- uint32_t prepend_len = tdata->aad.len;
+ uint32_t prepend_len = RTE_ALIGN_CEIL(tdata->aad.len, 16);
if (tdata->plaintext.len % fragsz != 0) {
if (tdata->plaintext.len / fragsz + 1 > SGL_MAX_NO)
@@ -11915,6 +11921,8 @@ static struct unit_test_suite cryptodev_qat_testsuite = {
test_AES_GCM_auth_encrypt_SGL_out_of_place_400B_400B),
TEST_CASE_ST(ut_setup, ut_teardown,
test_AES_GCM_auth_encrypt_SGL_out_of_place_1500B_2000B),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_AES_GCM_auth_encrypt_SGL_out_of_place_400B_1seg),
TEST_CASE_ST(ut_setup, ut_teardown,
test_AES_GCM_authenticated_encryption_test_case_1),
TEST_CASE_ST(ut_setup, ut_teardown,
--
2.17.1
next reply other threads:[~2019-12-20 11:51 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-20 11:50 Adam Dybkowski [this message]
2019-12-20 12:38 ` Trahe, Fiona
2019-12-20 12:46 ` Dybkowski, AdamX
2019-12-20 12:58 ` [dpdk-dev] [PATCH v2 0/1] test/crypto: fix missing operation status check Adam Dybkowski
2019-12-20 12:58 ` [dpdk-dev] [PATCH v2 1/1] " Adam Dybkowski
2019-12-20 13:06 ` Trahe, Fiona
2020-01-10 10:54 ` Anoob Joseph
2020-01-15 15:54 ` Akhil Goyal
2020-01-17 16:21 ` [dpdk-dev] [dpdk-stable] " Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191220115004.2713-1-adamx.dybkowski@intel.com \
--to=adamx.dybkowski@intel.com \
--cc=akhil.goyal@nxp.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=fiona.trahe@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).