From: Chenxu Di <chenxux.di@intel.com>
To: dev@dpdk.org
Cc: Yang Qiming <qiming.yang@intel.com>,
beilei.xing@intel.com, Chenxu Di <chenxux.di@intel.com>
Subject: [dpdk-dev] [PATCH v5 2/4] net/ice: cleanup Tx buffers
Date: Fri, 27 Dec 2019 03:45:18 +0000 [thread overview]
Message-ID: <20191227034520.78613-3-chenxux.di@intel.com> (raw)
In-Reply-To: <20191227034520.78613-1-chenxux.di@intel.com>
Add support to the ice driver for the API rte_eth_tx_done_cleanup
to force free consumed buffers on Tx ring.
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
---
drivers/net/ice/ice_ethdev.c | 1 +
drivers/net/ice/ice_rxtx.c | 123 +++++++++++++++++++++++++++++++++++
drivers/net/ice/ice_rxtx.h | 1 +
3 files changed, 125 insertions(+)
diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c
index de189daba..b55cdbf74 100644
--- a/drivers/net/ice/ice_ethdev.c
+++ b/drivers/net/ice/ice_ethdev.c
@@ -220,6 +220,7 @@ static const struct eth_dev_ops ice_eth_dev_ops = {
.filter_ctrl = ice_dev_filter_ctrl,
.udp_tunnel_port_add = ice_dev_udp_tunnel_port_add,
.udp_tunnel_port_del = ice_dev_udp_tunnel_port_del,
+ .tx_done_cleanup = ice_tx_done_cleanup,
};
/* store statistics names and its offset in stats structure */
diff --git a/drivers/net/ice/ice_rxtx.c b/drivers/net/ice/ice_rxtx.c
index 2db174456..7e704d2d5 100644
--- a/drivers/net/ice/ice_rxtx.c
+++ b/drivers/net/ice/ice_rxtx.c
@@ -863,6 +863,129 @@ ice_fdir_tx_queue_stop(struct rte_eth_dev *dev, uint16_t tx_queue_id)
return 0;
}
+
+int ice_tx_done_cleanup(void *q, uint32_t free_cnt)
+{
+ struct ice_tx_queue *txq = (struct ice_tx_queue *)q;
+ struct ice_tx_entry *sw_ring;
+ volatile struct ice_tx_desc *txr;
+ uint16_t tx_first; /* First segment analyzed. */
+ uint16_t tx_id; /* Current segment being processed. */
+ uint16_t tx_last; /* Last segment in the current packet. */
+ uint16_t tx_next; /* First segment of the next packet. */
+ int count;
+
+ if (txq == NULL)
+ return -ENODEV;
+
+ count = 0;
+ sw_ring = txq->sw_ring;
+ txr = txq->tx_ring;
+
+ /*
+ * tx_tail is the last sent packet on the sw_ring. Goto the end
+ * of that packet (the last segment in the packet chain) and
+ * then the next segment will be the start of the oldest segment
+ * in the sw_ring. This is the first packet that will be
+ * attempted to be freed.
+ */
+
+ /* Get last segment in most recently added packet. */
+ tx_last = sw_ring[txq->tx_tail].last_id;
+
+ /* Get the next segment, which is the oldest segment in ring. */
+ tx_first = sw_ring[tx_last].next_id;
+
+ /* Set the current index to the first. */
+ tx_id = tx_first;
+
+ /*
+ * Loop through each packet. For each packet, verify that an
+ * mbuf exists and that the last segment is free. If so, free
+ * it and move on.
+ */
+ while (1) {
+ tx_last = sw_ring[tx_id].last_id;
+
+ if (sw_ring[tx_last].mbuf) {
+ if ((txr[tx_last].cmd_type_offset_bsz &
+ rte_cpu_to_le_64(ICE_TXD_QW1_DTYPE_M)) ==
+ rte_cpu_to_le_64(ICE_TX_DESC_DTYPE_DESC_DONE)) {
+ /* Get the start of the next packet. */
+ tx_next = sw_ring[tx_last].next_id;
+
+ /*
+ * Loop through all segments in a
+ * packet.
+ */
+ do {
+ rte_pktmbuf_free_seg(sw_ring[tx_id].mbuf);
+ sw_ring[tx_id].mbuf = NULL;
+ sw_ring[tx_id].last_id = tx_id;
+
+ /* Move to next segment. */
+ tx_id = sw_ring[tx_id].next_id;
+
+ } while (tx_id != tx_next);
+
+ /*
+ * Increment the number of packets
+ * freed.
+ */
+ count++;
+
+ if (unlikely(count == (int)free_cnt))
+ break;
+ } else {
+ /*
+ * mbuf still in use, nothing left to
+ * free.
+ */
+ break;
+ }
+ } else {
+ /*
+ * There are multiple reasons to be here:
+ * 1) All the packets on the ring have been
+ * freed - tx_id is equal to tx_first
+ * and some packets have been freed.
+ * - Done, exit
+ * 2) Interfaces has not sent a rings worth of
+ * packets yet, so the segment after tail is
+ * still empty. Or a previous call to this
+ * function freed some of the segments but
+ * not all so there is a hole in the list.
+ * Hopefully this is a rare case.
+ * - Walk the list and find the next mbuf. If
+ * there isn't one, then done.
+ */
+ if (likely(tx_id == tx_first && count != 0))
+ break;
+
+ /*
+ * Walk the list and find the next mbuf, if any.
+ */
+ do {
+ /* Move to next segment. */
+ tx_id = sw_ring[tx_id].next_id;
+
+ if (sw_ring[tx_id].mbuf)
+ break;
+
+ } while (tx_id != tx_first);
+
+ /*
+ * Determine why previous loop bailed. If there
+ * is not an mbuf, done.
+ */
+ if (sw_ring[tx_id].mbuf == NULL)
+ break;
+ }
+ }
+
+ return count;
+}
+
int
ice_rx_queue_setup(struct rte_eth_dev *dev,
uint16_t queue_idx,
diff --git a/drivers/net/ice/ice_rxtx.h b/drivers/net/ice/ice_rxtx.h
index 9e3d2cd07..8d4232a61 100644
--- a/drivers/net/ice/ice_rxtx.h
+++ b/drivers/net/ice/ice_rxtx.h
@@ -183,6 +183,7 @@ int ice_rx_descriptor_status(void *rx_queue, uint16_t offset);
int ice_tx_descriptor_status(void *tx_queue, uint16_t offset);
void ice_set_default_ptype_table(struct rte_eth_dev *dev);
const uint32_t *ice_dev_supported_ptypes_get(struct rte_eth_dev *dev);
+int ice_tx_done_cleanup(void *txq, uint32_t free_cnt);
int ice_rx_vec_dev_check(struct rte_eth_dev *dev);
int ice_tx_vec_dev_check(struct rte_eth_dev *dev);
--
2.17.1
next prev parent reply other threads:[~2019-12-27 4:02 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <â20191203055134.72874-1-chenxux.di@intel.comâ>
2019-12-27 3:45 ` [dpdk-dev] [PATCH v5 0/4] drivers/net: " Chenxu Di
2019-12-27 3:45 ` [dpdk-dev] [PATCH v5 1/4] net/i40e: " Chenxu Di
2019-12-30 3:17 ` Yang, Qiming
2019-12-27 3:45 ` Chenxu Di [this message]
2019-12-30 3:29 ` [dpdk-dev] [PATCH v5 2/4] net/ice: " Yang, Qiming
2019-12-27 3:45 ` [dpdk-dev] [PATCH v5 3/4] net/ixgbe: " Chenxu Di
2019-12-30 3:29 ` Yang, Qiming
2019-12-27 3:45 ` [dpdk-dev] [PATCH v5 4/4] net/e1000: " Chenxu Di
2019-12-27 8:25 ` [dpdk-dev] [PATCH v5 0/4] drivers/net: " Zhang, Xiao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191227034520.78613-3-chenxux.di@intel.com \
--to=chenxux.di@intel.com \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=qiming.yang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).