From: oda@valinux.co.jp
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 3/4] net/vhost: delay vhost driver setup
Date: Wed, 8 Jan 2020 15:25:09 +0900 [thread overview]
Message-ID: <20200108062510.3478-4-oda@valinux.co.jp> (raw)
In-Reply-To: <20200108062510.3478-1-oda@valinux.co.jp>
From: Itsuro Oda <oda@valinux.co.jp>
setting vhost driver is delayed at eth_dev configuration
in order to be able to set it from a secondary process.
---
drivers/net/vhost/rte_eth_vhost.c | 130 ++++++++++++++++++------------
1 file changed, 78 insertions(+), 52 deletions(-)
diff --git a/drivers/net/vhost/rte_eth_vhost.c b/drivers/net/vhost/rte_eth_vhost.c
index 1b07aad24..0b8b5a4ca 100644
--- a/drivers/net/vhost/rte_eth_vhost.c
+++ b/drivers/net/vhost/rte_eth_vhost.c
@@ -96,6 +96,8 @@ struct vhost_queue {
struct pmd_internal {
rte_atomic32_t dev_attached;
char *iface_name;
+ uint64_t flags;
+ uint64_t disable_flags;
uint16_t max_queues;
int vid;
rte_atomic32_t started;
@@ -490,17 +492,6 @@ eth_vhost_tx(void *q, struct rte_mbuf **bufs, uint16_t nb_bufs)
return nb_tx;
}
-static int
-eth_dev_configure(struct rte_eth_dev *dev __rte_unused)
-{
- struct pmd_internal *internal = dev->data->dev_private;
- const struct rte_eth_rxmode *rxmode = &dev->data->dev_conf.rxmode;
-
- internal->vlan_strip = !!(rxmode->offloads & DEV_RX_OFFLOAD_VLAN_STRIP);
-
- return 0;
-}
-
static inline struct internal_list *
find_internal_resource(char *ifname)
{
@@ -876,6 +867,62 @@ static struct vhost_device_ops vhost_ops = {
.vring_state_changed = vring_state_changed,
};
+static int
+vhost_driver_setup(struct rte_eth_dev *eth_dev)
+{
+ struct pmd_internal *internal = eth_dev->data->dev_private;
+ struct internal_list *list = NULL;
+ struct rte_vhost_vring_state *vring_state = NULL;
+ unsigned int numa_node = eth_dev->device->numa_node;
+ const char *name = eth_dev->device->name;
+
+ list = rte_zmalloc_socket(name, sizeof(*list), 0, numa_node);
+ if (list == NULL)
+ goto error;
+
+ vring_state = rte_zmalloc_socket(name, sizeof(*vring_state),
+ 0, numa_node);
+ if (vring_state == NULL)
+ goto error;
+
+ list->eth_dev = eth_dev;
+ pthread_mutex_lock(&internal_list_lock);
+ TAILQ_INSERT_TAIL(&internal_list, list, next);
+ pthread_mutex_unlock(&internal_list_lock);
+
+ rte_spinlock_init(&vring_state->lock);
+ vring_states[eth_dev->data->port_id] = vring_state;
+
+ if (rte_vhost_driver_register(internal->iface_name, internal->flags))
+ goto error;
+
+ if (internal->disable_flags) {
+ if (rte_vhost_driver_disable_features(internal->iface_name,
+ internal->disable_flags))
+ goto error;
+ }
+
+ if (rte_vhost_driver_callback_register(internal->iface_name,
+ &vhost_ops) < 0) {
+ VHOST_LOG(ERR, "Can't register callbacks\n");
+ goto error;
+ }
+
+ if (rte_vhost_driver_start(internal->iface_name) < 0) {
+ VHOST_LOG(ERR, "Failed to start driver for %s\n",
+ internal->iface_name);
+ goto error;
+ }
+
+ return 0;
+
+error:
+ rte_free(vring_state);
+ rte_free(list);
+
+ return -1;
+}
+
int
rte_eth_vhost_get_queue_event(uint16_t port_id,
struct rte_eth_vhost_queue_event *event)
@@ -942,6 +989,24 @@ rte_eth_vhost_get_vid_from_port_id(uint16_t port_id)
return vid;
}
+static int
+eth_dev_configure(struct rte_eth_dev *dev)
+{
+ struct pmd_internal *internal = dev->data->dev_private;
+ const struct rte_eth_rxmode *rxmode = &dev->data->dev_conf.rxmode;
+
+ /* NOTE: the same process has to operate a vhost interface
+ * from begining to end (eth_dev configure to eth_dev close).
+ * It is user's responsibility at the moment.
+ */
+ if (vhost_driver_setup(dev) < 0)
+ return -1;
+
+ internal->vlan_strip = !!(rxmode->offloads & DEV_RX_OFFLOAD_VLAN_STRIP);
+
+ return 0;
+}
+
static int
eth_dev_start(struct rte_eth_dev *eth_dev)
{
@@ -1217,16 +1282,10 @@ eth_dev_vhost_create(struct rte_vdev_device *dev, char *iface_name,
struct pmd_internal *internal = NULL;
struct rte_eth_dev *eth_dev = NULL;
struct rte_ether_addr *eth_addr = NULL;
- struct rte_vhost_vring_state *vring_state = NULL;
- struct internal_list *list = NULL;
VHOST_LOG(INFO, "Creating VHOST-USER backend on numa socket %u\n",
numa_node);
- list = rte_zmalloc_socket(name, sizeof(*list), 0, numa_node);
- if (list == NULL)
- goto error;
-
/* reserve an ethdev entry */
eth_dev = rte_eth_vdev_allocate(dev, sizeof(*internal));
if (eth_dev == NULL)
@@ -1240,11 +1299,6 @@ eth_dev_vhost_create(struct rte_vdev_device *dev, char *iface_name,
*eth_addr = base_eth_addr;
eth_addr->addr_bytes[5] = eth_dev->data->port_id;
- vring_state = rte_zmalloc_socket(name,
- sizeof(*vring_state), 0, numa_node);
- if (vring_state == NULL)
- goto error;
-
/* now put it all together
* - store queue data in internal,
* - point eth_dev_data to internals
@@ -1257,18 +1311,12 @@ eth_dev_vhost_create(struct rte_vdev_device *dev, char *iface_name,
goto error;
strcpy(internal->iface_name, iface_name);
- list->eth_dev = eth_dev;
- pthread_mutex_lock(&internal_list_lock);
- TAILQ_INSERT_TAIL(&internal_list, list, next);
- pthread_mutex_unlock(&internal_list_lock);
-
- rte_spinlock_init(&vring_state->lock);
- vring_states[eth_dev->data->port_id] = vring_state;
-
data->nb_rx_queues = queues;
data->nb_tx_queues = queues;
internal->max_queues = queues;
internal->vid = -1;
+ internal->flags = flags;
+ internal->disable_flags = disable_flags;
data->dev_link = pmd_link;
data->dev_flags = RTE_ETH_DEV_INTR_LSC | RTE_ETH_DEV_CLOSE_REMOVE;
@@ -1278,35 +1326,13 @@ eth_dev_vhost_create(struct rte_vdev_device *dev, char *iface_name,
eth_dev->rx_pkt_burst = eth_vhost_rx;
eth_dev->tx_pkt_burst = eth_vhost_tx;
- if (rte_vhost_driver_register(iface_name, flags))
- goto error;
-
- if (disable_flags) {
- if (rte_vhost_driver_disable_features(iface_name,
- disable_flags))
- goto error;
- }
-
- if (rte_vhost_driver_callback_register(iface_name, &vhost_ops) < 0) {
- VHOST_LOG(ERR, "Can't register callbacks\n");
- goto error;
- }
-
- if (rte_vhost_driver_start(iface_name) < 0) {
- VHOST_LOG(ERR, "Failed to start driver for %s\n",
- iface_name);
- goto error;
- }
-
rte_eth_dev_probing_finish(eth_dev);
return data->port_id;
error:
if (internal)
rte_free(internal->iface_name);
- rte_free(vring_state);
rte_eth_dev_release_port(eth_dev);
- rte_free(list);
return -1;
}
--
2.17.0
next prev parent reply other threads:[~2020-01-08 6:25 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-08 6:25 [dpdk-dev] [PATCH 0/4] make vhost PMD available for secondary processes oda
2020-01-08 6:25 ` [dpdk-dev] [PATCH 1/4] net/vhost: remove an unused member oda
2020-01-08 6:25 ` [dpdk-dev] [PATCH 2/4] net/vhost: allocate iface_name from heap oda
2020-01-08 6:25 ` oda [this message]
2020-01-08 6:25 ` [dpdk-dev] [PATCH 4/4] net/vhost: make secondary probe complete oda
2020-01-08 6:38 ` [dpdk-dev] [PATCH 0/4] make vhost PMD available for secondary processes Itsuro ODA
2020-01-08 23:22 ` Itsuro Oda
2020-01-08 23:22 ` [dpdk-dev] [PATCH 1/4] net/vhost: remove an unused member Itsuro Oda
2020-02-04 17:56 ` Maxime Coquelin
2020-01-08 23:22 ` [dpdk-dev] [PATCH 2/4] net/vhost: allocate iface_name from heap Itsuro Oda
2020-02-04 17:59 ` Maxime Coquelin
2020-01-08 23:22 ` [dpdk-dev] [PATCH 3/4] net/vhost: delay vhost driver setup Itsuro Oda
2020-02-04 18:04 ` Maxime Coquelin
2020-01-08 23:22 ` [dpdk-dev] [PATCH 4/4] net/vhost: make secondary probe complete Itsuro Oda
2020-02-04 18:08 ` Maxime Coquelin
2020-01-20 2:17 ` [dpdk-dev] [PATCH 0/4] make vhost PMD available for secondary processes Itsuro ODA
2020-02-04 17:54 ` Maxime Coquelin
2020-02-04 22:19 ` Itsuro ODA
2020-02-06 1:39 ` [dpdk-dev] [PATCH v3 " Itsuro Oda
2020-02-06 1:39 ` [dpdk-dev] [PATCH v3 1/4] net/vhost: allocate interface name from heap Itsuro Oda
2020-02-06 1:39 ` [dpdk-dev] [PATCH v3 2/4] net/vhost: delay vhost driver setup Itsuro Oda
2020-02-18 8:50 ` Wang, Yinan
2020-02-18 10:42 ` Maxime Coquelin
2020-02-06 1:39 ` [dpdk-dev] [PATCH v3 3/4] net/vhost: make secondary probe complete Itsuro Oda
2020-02-06 1:39 ` [dpdk-dev] [PATCH v3 4/4] net/vhost: remove an unused member Itsuro Oda
2020-02-06 14:19 ` [dpdk-dev] [PATCH v3 0/4] make vhost PMD available for secondary processes Maxime Coquelin
2020-02-13 16:29 ` Maxime Coquelin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200108062510.3478-4-oda@valinux.co.jp \
--to=oda@valinux.co.jp \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).