From: <pbhagavatula@marvell.com>
To: <jerinj@marvell.com>, <konstantin.ananyev@intel.com>,
Marko Kovacevic <marko.kovacevic@intel.com>,
Ori Kam <orika@mellanox.com>,
Bruce Richardson <bruce.richardson@intel.com>,
Radu Nicolau <radu.nicolau@intel.com>,
"Akhil Goyal" <akhil.goyal@nxp.com>,
Tomasz Kantecki <tomasz.kantecki@intel.com>,
Sunil Kumar Kori <skori@marvell.com>,
Pavan Nikhilesh <pbhagavatula@marvell.com>
Cc: <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v3 03/11] examples/l3fwd: add event device configuration
Date: Sat, 11 Jan 2020 19:17:22 +0530 [thread overview]
Message-ID: <20200111134730.5329-4-pbhagavatula@marvell.com> (raw)
In-Reply-To: <20200111134730.5329-1-pbhagavatula@marvell.com>
From: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add event device configuration based on the capabilities of the
probed event device.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
---
examples/l3fwd/l3fwd_event.c | 3 +
examples/l3fwd/l3fwd_event.h | 36 ++++++++++
examples/l3fwd/l3fwd_event_generic.c | 75 ++++++++++++++++++++-
examples/l3fwd/l3fwd_event_internal_port.c | 78 +++++++++++++++++++++-
4 files changed, 190 insertions(+), 2 deletions(-)
diff --git a/examples/l3fwd/l3fwd_event.c b/examples/l3fwd/l3fwd_event.c
index 62218f3ca..9cb46c711 100644
--- a/examples/l3fwd/l3fwd_event.c
+++ b/examples/l3fwd/l3fwd_event.c
@@ -68,4 +68,7 @@ l3fwd_event_resource_setup(void)
/* Setup eventdev capability callbacks */
l3fwd_event_capability_setup();
+
+ /* Event device configuration */
+ evt_rsrc->ops.event_device_setup();
}
diff --git a/examples/l3fwd/l3fwd_event.h b/examples/l3fwd/l3fwd_event.h
index d25c8d222..fc3862ec1 100644
--- a/examples/l3fwd/l3fwd_event.h
+++ b/examples/l3fwd/l3fwd_event.h
@@ -8,6 +8,7 @@
#include <rte_common.h>
#include <rte_eventdev.h>
#include <rte_event_eth_tx_adapter.h>
+#include <rte_service.h>
#include <rte_spinlock.h>
#include "l3fwd.h"
@@ -18,6 +19,29 @@ typedef void (*event_port_setup_cb)(void);
typedef void (*adapter_setup_cb)(void);
typedef int (*event_loop_cb)(void *);
+struct l3fwd_event_queues {
+ uint8_t *event_q_id;
+ uint8_t nb_queues;
+};
+
+struct l3fwd_event_ports {
+ uint8_t *event_p_id;
+ uint8_t nb_ports;
+ rte_spinlock_t lock;
+};
+
+struct l3fwd_event_rx_adptr {
+ uint32_t service_id;
+ uint8_t nb_rx_adptr;
+ uint8_t *rx_adptr;
+};
+
+struct l3fwd_event_tx_adptr {
+ uint32_t service_id;
+ uint8_t nb_tx_adptr;
+ uint8_t *tx_adptr;
+};
+
struct l3fwd_event_setup_ops {
event_device_setup_cb event_device_setup;
event_queue_setup_cb event_queue_setup;
@@ -28,9 +52,21 @@ struct l3fwd_event_setup_ops {
};
struct l3fwd_event_resources {
+ struct rte_event_port_conf def_p_conf;
+ struct l3fwd_event_rx_adptr rx_adptr;
+ struct l3fwd_event_tx_adptr tx_adptr;
+ uint8_t disable_implicit_release;
struct l3fwd_event_setup_ops ops;
+ struct rte_mempool * (*pkt_pool)[NB_SOCKETS];
+ struct l3fwd_event_queues evq;
+ struct l3fwd_event_ports evp;
+ uint32_t port_mask;
+ uint8_t per_port_pool;
+ uint8_t event_d_id;
uint8_t sched_type;
uint8_t tx_mode_q;
+ uint8_t deq_depth;
+ uint8_t has_burst;
uint8_t enabled;
uint8_t eth_rx_queues;
};
diff --git a/examples/l3fwd/l3fwd_event_generic.c b/examples/l3fwd/l3fwd_event_generic.c
index 7fff850e5..d6f23a196 100644
--- a/examples/l3fwd/l3fwd_event_generic.c
+++ b/examples/l3fwd/l3fwd_event_generic.c
@@ -7,8 +7,81 @@
#include "l3fwd.h"
#include "l3fwd_event.h"
+static uint32_t
+l3fwd_event_device_setup_generic(void)
+{
+ struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+ struct rte_event_dev_config event_d_conf = {
+ .nb_events_limit = 4096,
+ .nb_event_queue_flows = 1024,
+ .nb_event_port_dequeue_depth = 128,
+ .nb_event_port_enqueue_depth = 128
+ };
+ struct rte_event_dev_info dev_info;
+ const uint8_t event_d_id = 0; /* Always use first event device only */
+ uint32_t event_queue_cfg = 0;
+ uint16_t ethdev_count = 0;
+ uint16_t num_workers = 0;
+ uint16_t port_id;
+ int ret;
+
+ RTE_ETH_FOREACH_DEV(port_id) {
+ if ((evt_rsrc->port_mask & (1 << port_id)) == 0)
+ continue;
+ ethdev_count++;
+ }
+
+ /* Event device configurtion */
+ rte_event_dev_info_get(event_d_id, &dev_info);
+ evt_rsrc->disable_implicit_release = !!(dev_info.event_dev_cap &
+ RTE_EVENT_DEV_CAP_IMPLICIT_RELEASE_DISABLE);
+
+ if (dev_info.event_dev_cap & RTE_EVENT_DEV_CAP_QUEUE_ALL_TYPES)
+ event_queue_cfg |= RTE_EVENT_QUEUE_CFG_ALL_TYPES;
+
+ /* One queue for each ethdev port + one Tx adapter Single link queue. */
+ event_d_conf.nb_event_queues = ethdev_count + 1;
+ if (dev_info.max_event_queues < event_d_conf.nb_event_queues)
+ event_d_conf.nb_event_queues = dev_info.max_event_queues;
+
+ if (dev_info.max_num_events < event_d_conf.nb_events_limit)
+ event_d_conf.nb_events_limit = dev_info.max_num_events;
+
+ if (dev_info.max_event_queue_flows < event_d_conf.nb_event_queue_flows)
+ event_d_conf.nb_event_queue_flows =
+ dev_info.max_event_queue_flows;
+
+ if (dev_info.max_event_port_dequeue_depth <
+ event_d_conf.nb_event_port_dequeue_depth)
+ event_d_conf.nb_event_port_dequeue_depth =
+ dev_info.max_event_port_dequeue_depth;
+
+ if (dev_info.max_event_port_enqueue_depth <
+ event_d_conf.nb_event_port_enqueue_depth)
+ event_d_conf.nb_event_port_enqueue_depth =
+ dev_info.max_event_port_enqueue_depth;
+
+ num_workers = rte_lcore_count() - rte_service_lcore_count();
+ if (dev_info.max_event_ports < num_workers)
+ num_workers = dev_info.max_event_ports;
+
+ event_d_conf.nb_event_ports = num_workers;
+ evt_rsrc->evp.nb_ports = num_workers;
+ evt_rsrc->evq.nb_queues = event_d_conf.nb_event_queues;
+
+ evt_rsrc->has_burst = !!(dev_info.event_dev_cap &
+ RTE_EVENT_DEV_CAP_BURST_MODE);
+
+ ret = rte_event_dev_configure(event_d_id, &event_d_conf);
+ if (ret < 0)
+ rte_panic("Error in configuring event device\n");
+
+ evt_rsrc->event_d_id = event_d_id;
+ return event_queue_cfg;
+}
+
void
l3fwd_event_set_generic_ops(struct l3fwd_event_setup_ops *ops)
{
- RTE_SET_USED(ops);
+ ops->event_device_setup = l3fwd_event_device_setup_generic;
}
diff --git a/examples/l3fwd/l3fwd_event_internal_port.c b/examples/l3fwd/l3fwd_event_internal_port.c
index 085e9c825..05e2aba53 100644
--- a/examples/l3fwd/l3fwd_event_internal_port.c
+++ b/examples/l3fwd/l3fwd_event_internal_port.c
@@ -7,8 +7,84 @@
#include "l3fwd.h"
#include "l3fwd_event.h"
+static uint32_t
+l3fwd_event_device_setup_internal_port(void)
+{
+ struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+ struct rte_event_dev_config event_d_conf = {
+ .nb_events_limit = 4096,
+ .nb_event_queue_flows = 1024,
+ .nb_event_port_dequeue_depth = 128,
+ .nb_event_port_enqueue_depth = 128
+ };
+ struct rte_event_dev_info dev_info;
+ uint8_t disable_implicit_release;
+ const uint8_t event_d_id = 0; /* Always use first event device only */
+ uint32_t event_queue_cfg = 0;
+ uint16_t ethdev_count = 0;
+ uint16_t num_workers = 0;
+ uint16_t port_id;
+ int ret;
+
+ RTE_ETH_FOREACH_DEV(port_id) {
+ if ((evt_rsrc->port_mask & (1 << port_id)) == 0)
+ continue;
+ ethdev_count++;
+ }
+
+ /* Event device configurtion */
+ rte_event_dev_info_get(event_d_id, &dev_info);
+
+ disable_implicit_release = !!(dev_info.event_dev_cap &
+ RTE_EVENT_DEV_CAP_IMPLICIT_RELEASE_DISABLE);
+ evt_rsrc->disable_implicit_release =
+ disable_implicit_release;
+
+ if (dev_info.event_dev_cap & RTE_EVENT_DEV_CAP_QUEUE_ALL_TYPES)
+ event_queue_cfg |= RTE_EVENT_QUEUE_CFG_ALL_TYPES;
+
+ event_d_conf.nb_event_queues = ethdev_count;
+ if (dev_info.max_event_queues < event_d_conf.nb_event_queues)
+ event_d_conf.nb_event_queues = dev_info.max_event_queues;
+
+ if (dev_info.max_num_events < event_d_conf.nb_events_limit)
+ event_d_conf.nb_events_limit = dev_info.max_num_events;
+
+ if (dev_info.max_event_queue_flows < event_d_conf.nb_event_queue_flows)
+ event_d_conf.nb_event_queue_flows =
+ dev_info.max_event_queue_flows;
+
+ if (dev_info.max_event_port_dequeue_depth <
+ event_d_conf.nb_event_port_dequeue_depth)
+ event_d_conf.nb_event_port_dequeue_depth =
+ dev_info.max_event_port_dequeue_depth;
+
+ if (dev_info.max_event_port_enqueue_depth <
+ event_d_conf.nb_event_port_enqueue_depth)
+ event_d_conf.nb_event_port_enqueue_depth =
+ dev_info.max_event_port_enqueue_depth;
+
+ num_workers = rte_lcore_count();
+ if (dev_info.max_event_ports < num_workers)
+ num_workers = dev_info.max_event_ports;
+
+ event_d_conf.nb_event_ports = num_workers;
+ evt_rsrc->evp.nb_ports = num_workers;
+ evt_rsrc->evq.nb_queues = event_d_conf.nb_event_queues;
+ evt_rsrc->has_burst = !!(dev_info.event_dev_cap &
+ RTE_EVENT_DEV_CAP_BURST_MODE);
+
+ ret = rte_event_dev_configure(event_d_id, &event_d_conf);
+ if (ret < 0)
+ rte_panic("Error in configuring event device\n");
+
+ evt_rsrc->event_d_id = event_d_id;
+ return event_queue_cfg;
+}
+
+
void
l3fwd_event_set_internal_port_ops(struct l3fwd_event_setup_ops *ops)
{
- RTE_SET_USED(ops);
+ ops->event_device_setup = l3fwd_event_device_setup_internal_port;
}
--
2.17.1
next prev parent reply other threads:[~2020-01-11 13:48 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-04 14:43 [dpdk-dev] [PATCH v2 00/11] example/l3fwd: introduce event device support pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 01/11] examples/l3fwd: add framework for event device pbhagavatula
2020-01-03 12:49 ` Ananyev, Konstantin
2020-01-06 4:27 ` Pavan Nikhilesh Bhagavatula
2020-01-06 12:32 ` Ananyev, Konstantin
2020-01-07 16:34 ` Pavan Nikhilesh Bhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 02/11] examples/l3fwd: split pipelines based on capability pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 03/11] examples/l3fwd: add event device configuration pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 04/11] examples/l3fwd: add ethdev setup based on eventdev pbhagavatula
2019-12-27 13:33 ` Nipun Gupta
2019-12-29 15:42 ` Pavan Nikhilesh Bhagavatula
2019-12-30 7:40 ` Nipun Gupta
2020-01-02 6:21 ` Pavan Nikhilesh Bhagavatula
2020-01-02 8:49 ` Nipun Gupta
2020-01-02 9:33 ` Jerin Jacob
2020-01-03 9:06 ` Nipun Gupta
2020-01-03 9:09 ` Jerin Jacob
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 05/11] examples/l3fwd: add event port and queue setup pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 06/11] examples/l3fwd: add event eth Rx/Tx adapter setup pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 07/11] examples/l3fwd: add service core setup based on caps pbhagavatula
2020-01-03 13:07 ` Ananyev, Konstantin
2020-01-06 4:29 ` Pavan Nikhilesh Bhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 08/11] examples/l3fwd: add event lpm main loop pbhagavatula
2020-01-03 13:16 ` Ananyev, Konstantin
2020-01-06 4:43 ` Pavan Nikhilesh Bhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 09/11] examples/l3fwd: add event em " pbhagavatula
2020-01-03 13:45 ` Ananyev, Konstantin
2020-01-06 4:44 ` Pavan Nikhilesh Bhagavatula
2020-01-06 12:27 ` Ananyev, Konstantin
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 10/11] examples/l3fwd: add graceful teardown for eventdevice pbhagavatula
2020-01-03 13:52 ` Ananyev, Konstantin
2020-01-06 4:50 ` Pavan Nikhilesh Bhagavatula
2020-01-06 12:12 ` Ananyev, Konstantin
2020-01-07 16:28 ` Pavan Nikhilesh Bhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 11/11] doc: update l3fwd user guide to support eventdev pbhagavatula
2019-12-04 15:16 ` [dpdk-dev] [PATCH v2 00/11] example/l3fwd: introduce event device support Jerin Jacob
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 " pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 01/11] examples/l3fwd: add framework for event device pbhagavatula
2020-01-21 8:44 ` Jerin Jacob
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 02/11] examples/l3fwd: split pipelines based on capability pbhagavatula
2020-01-21 8:46 ` Jerin Jacob
2020-01-11 13:47 ` pbhagavatula [this message]
2020-01-21 8:51 ` [dpdk-dev] [PATCH v3 03/11] examples/l3fwd: add event device configuration Jerin Jacob
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 04/11] examples/l3fwd: add ethdev setup based on eventdev pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 05/11] examples/l3fwd: add event port and queue setup pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 06/11] examples/l3fwd: add event eth Rx/Tx adapter setup pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 07/11] examples/l3fwd: add service core setup based on caps pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 08/11] examples/l3fwd: add event lpm main loop pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 09/11] examples/l3fwd: add event em " pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 10/11] examples/l3fwd: add graceful teardown for eventdevice pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 11/11] doc: update l3fwd user guide to support eventdev pbhagavatula
2020-01-13 12:02 ` [dpdk-dev] [PATCH v3 00/11] example/l3fwd: introduce event device support Nipun Gupta
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 " pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 01/11] examples/l3fwd: add framework for event device pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 02/11] examples/l3fwd: split pipelines based on capability pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 03/11] examples/l3fwd: add event device configuration pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 04/11] examples/l3fwd: add ethdev setup based on eventdev pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 05/11] examples/l3fwd: add event port and queue setup pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 06/11] examples/l3fwd: add event eth Rx/Tx adapter setup pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 07/11] examples/l3fwd: add service core setup based on caps pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 08/11] examples/l3fwd: add event lpm main loop pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 09/11] examples/l3fwd: add event em " pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 10/11] examples/l3fwd: add graceful teardown for eventdevice pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 11/11] doc: update l3fwd user guide to support eventdev pbhagavatula
2020-01-23 5:25 ` Jerin Jacob
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 00/11] example/l3fwd: introduce event device support pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 01/11] examples/l3fwd: add framework for event device pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 02/11] examples/l3fwd: split pipelines based on capability pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 03/11] examples/l3fwd: add event device configuration pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 04/11] examples/l3fwd: add ethdev setup based on eventdev pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 05/11] examples/l3fwd: add event port and queue setup pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 06/11] examples/l3fwd: add event eth Rx/Tx adapter setup pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 07/11] examples/l3fwd: add service core setup based on caps pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 08/11] examples/l3fwd: add event lpm main loop pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 09/11] examples/l3fwd: add event em " pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 10/11] examples/l3fwd: add graceful teardown for eventdevice pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 11/11] doc: update l3fwd user guide to support eventdev pbhagavatula
2020-01-27 16:17 ` [dpdk-dev] [PATCH v5 00/11] example/l3fwd: introduce event device support Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200111134730.5329-4-pbhagavatula@marvell.com \
--to=pbhagavatula@marvell.com \
--cc=akhil.goyal@nxp.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=konstantin.ananyev@intel.com \
--cc=marko.kovacevic@intel.com \
--cc=orika@mellanox.com \
--cc=radu.nicolau@intel.com \
--cc=skori@marvell.com \
--cc=tomasz.kantecki@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).