From: <pbhagavatula@marvell.com>
To: <jerinj@marvell.com>, <konstantin.ananyev@intel.com>,
Marko Kovacevic <marko.kovacevic@intel.com>,
Ori Kam <orika@mellanox.com>,
Bruce Richardson <bruce.richardson@intel.com>,
Radu Nicolau <radu.nicolau@intel.com>,
"Akhil Goyal" <akhil.goyal@nxp.com>,
Tomasz Kantecki <tomasz.kantecki@intel.com>,
Sunil Kumar Kori <skori@marvell.com>,
Pavan Nikhilesh <pbhagavatula@marvell.com>
Cc: <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v3 07/11] examples/l3fwd: add service core setup based on caps
Date: Sat, 11 Jan 2020 19:17:26 +0530 [thread overview]
Message-ID: <20200111134730.5329-8-pbhagavatula@marvell.com> (raw)
In-Reply-To: <20200111134730.5329-1-pbhagavatula@marvell.com>
From: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add service core setup when eventdev and Rx/Tx adapter don't have
internal port capability.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
---
examples/l3fwd/l3fwd_event.c | 6 ++
examples/l3fwd/main.c | 188 +++++++++++++++++++++++++++--------
2 files changed, 150 insertions(+), 44 deletions(-)
diff --git a/examples/l3fwd/l3fwd_event.c b/examples/l3fwd/l3fwd_event.c
index 0a75e39ee..1ed42c3ab 100644
--- a/examples/l3fwd/l3fwd_event.c
+++ b/examples/l3fwd/l3fwd_event.c
@@ -212,6 +212,7 @@ l3fwd_event_resource_setup(struct rte_eth_conf *port_conf)
{
struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
uint32_t event_queue_cfg;
+ int ret;
if (!evt_rsrc->enabled)
return;
@@ -236,4 +237,9 @@ l3fwd_event_resource_setup(struct rte_eth_conf *port_conf)
/* Rx/Tx adapters configuration */
evt_rsrc->ops.adapter_setup();
+
+ /* Start event device */
+ ret = rte_event_dev_start(evt_rsrc->event_d_id);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Error in starting eventdev");
}
diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
index 0618daa38..b39dc6ff6 100644
--- a/examples/l3fwd/main.c
+++ b/examples/l3fwd/main.c
@@ -877,49 +877,18 @@ prepare_ptype_parser(uint16_t portid, uint16_t queueid)
return 0;
}
-int
-main(int argc, char **argv)
+static void
+l3fwd_poll_resource_setup(void)
{
- struct l3fwd_event_resources *evt_rsrc;
- struct lcore_conf *qconf;
+ uint8_t nb_rx_queue, queue, socketid;
struct rte_eth_dev_info dev_info;
+ uint32_t n_tx_queue, nb_lcores;
struct rte_eth_txconf *txconf;
- int ret;
- unsigned nb_ports;
+ struct lcore_conf *qconf;
uint16_t queueid, portid;
- unsigned lcore_id;
- uint32_t n_tx_queue, nb_lcores;
- uint8_t nb_rx_queue, queue, socketid;
-
- /* init EAL */
- ret = rte_eal_init(argc, argv);
- if (ret < 0)
- rte_exit(EXIT_FAILURE, "Invalid EAL parameters\n");
- argc -= ret;
- argv += ret;
-
- force_quit = false;
- signal(SIGINT, signal_handler);
- signal(SIGTERM, signal_handler);
-
- /* pre-init dst MACs for all ports to 02:00:00:00:00:xx */
- for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
- dest_eth_addr[portid] =
- RTE_ETHER_LOCAL_ADMIN_ADDR + ((uint64_t)portid << 40);
- *(uint64_t *)(val_eth + portid) = dest_eth_addr[portid];
- }
-
- evt_rsrc = l3fwd_get_eventdev_rsrc();
- /* parse application arguments (after the EAL ones) */
- ret = parse_args(argc, argv);
- if (ret < 0)
- rte_exit(EXIT_FAILURE, "Invalid L3FWD parameters\n");
-
- evt_rsrc->per_port_pool = per_port_pool;
- evt_rsrc->pkt_pool = pktmbuf_pool;
- evt_rsrc->port_mask = enabled_port_mask;
- /* Configure eventdev parameters if user has requested */
- l3fwd_event_resource_setup(&port_conf);
+ unsigned int nb_ports;
+ unsigned int lcore_id;
+ int ret;
if (check_lcore_params() < 0)
rte_exit(EXIT_FAILURE, "check_lcore_params failed\n");
@@ -935,9 +904,6 @@ main(int argc, char **argv)
nb_lcores = rte_lcore_count();
- /* Setup function pointers for lookup method. */
- setup_l3fwd_lookup_tables();
-
/* initialize all ports */
RTE_ETH_FOREACH_DEV(portid) {
struct rte_eth_conf local_port_conf = port_conf;
@@ -1105,7 +1071,142 @@ main(int argc, char **argv)
}
}
- printf("\n");
+
+}
+
+static inline int
+l3fwd_service_enable(uint32_t service_id)
+{
+ uint8_t min_service_count = UINT8_MAX;
+ uint32_t slcore_array[RTE_MAX_LCORE];
+ unsigned int slcore = 0;
+ uint8_t service_count;
+ int32_t slcore_count;
+
+ if (!rte_service_lcore_count())
+ return -ENOENT;
+
+ slcore_count = rte_service_lcore_list(slcore_array, RTE_MAX_LCORE);
+ if (slcore_count < 0)
+ return -ENOENT;
+ /* Get the core which has least number of services running. */
+ while (slcore_count--) {
+ /* Reset default mapping */
+ rte_service_map_lcore_set(service_id,
+ slcore_array[slcore_count], 0);
+ service_count = rte_service_lcore_count_services(
+ slcore_array[slcore_count]);
+ if (service_count < min_service_count) {
+ slcore = slcore_array[slcore_count];
+ min_service_count = service_count;
+ }
+ }
+ if (rte_service_map_lcore_set(service_id, slcore, 1))
+ return -ENOENT;
+ rte_service_lcore_start(slcore);
+
+ return 0;
+}
+
+static void
+l3fwd_event_service_setup(void)
+{
+ struct l3fwd_event_resources *evt_rsrc = l3fwd_get_eventdev_rsrc();
+ struct rte_event_dev_info evdev_info;
+ uint32_t service_id, caps;
+ int ret, i;
+
+ rte_event_dev_info_get(evt_rsrc->event_d_id, &evdev_info);
+ if (evdev_info.event_dev_cap & RTE_EVENT_DEV_CAP_DISTRIBUTED_SCHED) {
+ ret = rte_event_dev_service_id_get(evt_rsrc->event_d_id,
+ &service_id);
+ if (ret != -ESRCH && ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Error in starting eventdev service\n");
+ l3fwd_service_enable(service_id);
+ }
+
+ for (i = 0; i < evt_rsrc->rx_adptr.nb_rx_adptr; i++) {
+ ret = rte_event_eth_rx_adapter_caps_get(evt_rsrc->event_d_id,
+ evt_rsrc->rx_adptr.rx_adptr[i], &caps);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "Failed to get Rx adapter[%d] caps\n",
+ evt_rsrc->rx_adptr.rx_adptr[i]);
+ ret = rte_event_eth_rx_adapter_service_id_get(
+ evt_rsrc->event_d_id,
+ &service_id);
+ if (ret != -ESRCH && ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Error in starting Rx adapter[%d] service\n",
+ evt_rsrc->rx_adptr.rx_adptr[i]);
+ l3fwd_service_enable(service_id);
+ }
+
+ for (i = 0; i < evt_rsrc->tx_adptr.nb_tx_adptr; i++) {
+ ret = rte_event_eth_tx_adapter_caps_get(evt_rsrc->event_d_id,
+ evt_rsrc->tx_adptr.tx_adptr[i], &caps);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "Failed to get Rx adapter[%d] caps\n",
+ evt_rsrc->tx_adptr.tx_adptr[i]);
+ ret = rte_event_eth_tx_adapter_service_id_get(
+ evt_rsrc->event_d_id,
+ &service_id);
+ if (ret != -ESRCH && ret != 0)
+ rte_exit(EXIT_FAILURE,
+ "Error in starting Rx adapter[%d] service\n",
+ evt_rsrc->tx_adptr.tx_adptr[i]);
+ l3fwd_service_enable(service_id);
+ }
+}
+
+int
+main(int argc, char **argv)
+{
+ struct l3fwd_event_resources *evt_rsrc;
+ struct lcore_conf *qconf;
+ uint16_t queueid, portid;
+ unsigned int lcore_id;
+ uint8_t queue;
+ int ret;
+
+ /* init EAL */
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Invalid EAL parameters\n");
+ argc -= ret;
+ argv += ret;
+
+ force_quit = false;
+ signal(SIGINT, signal_handler);
+ signal(SIGTERM, signal_handler);
+
+ /* pre-init dst MACs for all ports to 02:00:00:00:00:xx */
+ for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
+ dest_eth_addr[portid] =
+ RTE_ETHER_LOCAL_ADMIN_ADDR + ((uint64_t)portid << 40);
+ *(uint64_t *)(val_eth + portid) = dest_eth_addr[portid];
+ }
+
+ evt_rsrc = l3fwd_get_eventdev_rsrc();
+ /* parse application arguments (after the EAL ones) */
+ ret = parse_args(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Invalid L3FWD parameters\n");
+
+ /* Setup function pointers for lookup method. */
+ setup_l3fwd_lookup_tables();
+
+ evt_rsrc->per_port_pool = per_port_pool;
+ evt_rsrc->pkt_pool = pktmbuf_pool;
+ evt_rsrc->port_mask = enabled_port_mask;
+ /* Configure eventdev parameters if user has requested */
+ if (evt_rsrc->enabled) {
+ l3fwd_event_resource_setup(&port_conf);
+ l3fwd_event_service_setup();
+ } else
+ l3fwd_poll_resource_setup();
/* start ports */
RTE_ETH_FOREACH_DEV(portid) {
@@ -1148,7 +1249,6 @@ main(int argc, char **argv)
}
}
-
check_all_ports_link_status(enabled_port_mask);
ret = 0;
--
2.17.1
next prev parent reply other threads:[~2020-01-11 13:48 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-04 14:43 [dpdk-dev] [PATCH v2 00/11] example/l3fwd: introduce event device support pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 01/11] examples/l3fwd: add framework for event device pbhagavatula
2020-01-03 12:49 ` Ananyev, Konstantin
2020-01-06 4:27 ` Pavan Nikhilesh Bhagavatula
2020-01-06 12:32 ` Ananyev, Konstantin
2020-01-07 16:34 ` Pavan Nikhilesh Bhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 02/11] examples/l3fwd: split pipelines based on capability pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 03/11] examples/l3fwd: add event device configuration pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 04/11] examples/l3fwd: add ethdev setup based on eventdev pbhagavatula
2019-12-27 13:33 ` Nipun Gupta
2019-12-29 15:42 ` Pavan Nikhilesh Bhagavatula
2019-12-30 7:40 ` Nipun Gupta
2020-01-02 6:21 ` Pavan Nikhilesh Bhagavatula
2020-01-02 8:49 ` Nipun Gupta
2020-01-02 9:33 ` Jerin Jacob
2020-01-03 9:06 ` Nipun Gupta
2020-01-03 9:09 ` Jerin Jacob
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 05/11] examples/l3fwd: add event port and queue setup pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 06/11] examples/l3fwd: add event eth Rx/Tx adapter setup pbhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 07/11] examples/l3fwd: add service core setup based on caps pbhagavatula
2020-01-03 13:07 ` Ananyev, Konstantin
2020-01-06 4:29 ` Pavan Nikhilesh Bhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 08/11] examples/l3fwd: add event lpm main loop pbhagavatula
2020-01-03 13:16 ` Ananyev, Konstantin
2020-01-06 4:43 ` Pavan Nikhilesh Bhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 09/11] examples/l3fwd: add event em " pbhagavatula
2020-01-03 13:45 ` Ananyev, Konstantin
2020-01-06 4:44 ` Pavan Nikhilesh Bhagavatula
2020-01-06 12:27 ` Ananyev, Konstantin
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 10/11] examples/l3fwd: add graceful teardown for eventdevice pbhagavatula
2020-01-03 13:52 ` Ananyev, Konstantin
2020-01-06 4:50 ` Pavan Nikhilesh Bhagavatula
2020-01-06 12:12 ` Ananyev, Konstantin
2020-01-07 16:28 ` Pavan Nikhilesh Bhagavatula
2019-12-04 14:43 ` [dpdk-dev] [PATCH v2 11/11] doc: update l3fwd user guide to support eventdev pbhagavatula
2019-12-04 15:16 ` [dpdk-dev] [PATCH v2 00/11] example/l3fwd: introduce event device support Jerin Jacob
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 " pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 01/11] examples/l3fwd: add framework for event device pbhagavatula
2020-01-21 8:44 ` Jerin Jacob
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 02/11] examples/l3fwd: split pipelines based on capability pbhagavatula
2020-01-21 8:46 ` Jerin Jacob
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 03/11] examples/l3fwd: add event device configuration pbhagavatula
2020-01-21 8:51 ` Jerin Jacob
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 04/11] examples/l3fwd: add ethdev setup based on eventdev pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 05/11] examples/l3fwd: add event port and queue setup pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 06/11] examples/l3fwd: add event eth Rx/Tx adapter setup pbhagavatula
2020-01-11 13:47 ` pbhagavatula [this message]
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 08/11] examples/l3fwd: add event lpm main loop pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 09/11] examples/l3fwd: add event em " pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 10/11] examples/l3fwd: add graceful teardown for eventdevice pbhagavatula
2020-01-11 13:47 ` [dpdk-dev] [PATCH v3 11/11] doc: update l3fwd user guide to support eventdev pbhagavatula
2020-01-13 12:02 ` [dpdk-dev] [PATCH v3 00/11] example/l3fwd: introduce event device support Nipun Gupta
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 " pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 01/11] examples/l3fwd: add framework for event device pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 02/11] examples/l3fwd: split pipelines based on capability pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 03/11] examples/l3fwd: add event device configuration pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 04/11] examples/l3fwd: add ethdev setup based on eventdev pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 05/11] examples/l3fwd: add event port and queue setup pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 06/11] examples/l3fwd: add event eth Rx/Tx adapter setup pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 07/11] examples/l3fwd: add service core setup based on caps pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 08/11] examples/l3fwd: add event lpm main loop pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 09/11] examples/l3fwd: add event em " pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 10/11] examples/l3fwd: add graceful teardown for eventdevice pbhagavatula
2020-01-22 18:28 ` [dpdk-dev] [PATCH v4 11/11] doc: update l3fwd user guide to support eventdev pbhagavatula
2020-01-23 5:25 ` Jerin Jacob
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 00/11] example/l3fwd: introduce event device support pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 01/11] examples/l3fwd: add framework for event device pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 02/11] examples/l3fwd: split pipelines based on capability pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 03/11] examples/l3fwd: add event device configuration pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 04/11] examples/l3fwd: add ethdev setup based on eventdev pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 05/11] examples/l3fwd: add event port and queue setup pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 06/11] examples/l3fwd: add event eth Rx/Tx adapter setup pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 07/11] examples/l3fwd: add service core setup based on caps pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 08/11] examples/l3fwd: add event lpm main loop pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 09/11] examples/l3fwd: add event em " pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 10/11] examples/l3fwd: add graceful teardown for eventdevice pbhagavatula
2020-01-24 4:05 ` [dpdk-dev] [PATCH v5 11/11] doc: update l3fwd user guide to support eventdev pbhagavatula
2020-01-27 16:17 ` [dpdk-dev] [PATCH v5 00/11] example/l3fwd: introduce event device support Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200111134730.5329-8-pbhagavatula@marvell.com \
--to=pbhagavatula@marvell.com \
--cc=akhil.goyal@nxp.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=konstantin.ananyev@intel.com \
--cc=marko.kovacevic@intel.com \
--cc=orika@mellanox.com \
--cc=radu.nicolau@intel.com \
--cc=skori@marvell.com \
--cc=tomasz.kantecki@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).